Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.2 LAccepted-AOC | L1 | Accepted-AOC DUE TO QUOTED RATE IS L1 | |
| 2 | L2₹12.7 L+₹48,060 (3.92%)Rejected-Finance KALIBARI ROAD TINSUKIA TINSUKIA ASSAM 786171 | TINSUKIA | ASSAM | 786171 | L2 | Rejected-Finance DUE TO QUOTED RATE IS HIGH |
Tender Value
₹12.2 L
EMD Value
₹24,400
Closing Date
16 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
PROVN OF ASSY AREA AT MT PARK AT LEKHAPANI MIL STN
2022_MES_532983_6
8667/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
4 documents required · 4 mandatory
₹500
Yes
GE LEKHAPANI
₹24,400
Yes
24 Jan 2023
20 Dec 2022
19 Jan 2023
20 Dec 2022
16 Jan 2023
27 Dec 2022
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation getting out in soft/ loose soil complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil,complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M&L PCC (1:4:8), type D-2, (using 40 mm graded stone aggregate) as in foundations, filling, mass concrete etc complete all as specified and directed.
M&L PCC ( 1:3:6 ), type C-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
Rolling and consolidating formation surfaces in cutting with power roller exceeding 8 tonne and n exc 12 tonne complete all as specified and directed by Eng-in-charge.
M&L Hardcore of guage exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface with and including 8 to 12 tonne power roller complete all as specified and directed by Eng-in-charge.
M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Eng-in-charge
M&L Factory made chamfered edge cement concrete paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by Eng-in-charge. Note:-Sand bed shall be measured and paid separately
M&L Factory made chamfered edge cement concrete coloured paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by Eng-in-charge. Note:-Sand bed shall be measured and paid separately
M&L Providing RCC (1:1/2:3) Nominal mix type A1 (using 20mm graded stone aggregate) as in foundation, footings, plinth beam and similar works complete all as specified and directed.
M&L Providing RCC (1:1/2:3) Nominal mix type A1 (using 20mm graded stone aggregate) as in columns,posts and struts and similar works complete all as specified and directed.
Use and waste of form work to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
Use and waste of form work to sides of pillars, posts, struts, piers, coloumns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,etc complete all as specified and as directed.
All as per Item No.18 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders,complete all as specified and as directed.
M&L for 50 mm thick PCC (1:3:6) type C-2, (using 40 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 omplete all as specified and as directed.
S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St 240 complete all as specified and directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (GdeE- 250) quality A, complete all as specified and as directed..
S&F Mild Steel work in square/rectangular hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 4923 grade St 240 complete all as specified and directed.
S&F Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
S&F Mild steel screw bolts (Machine made) with hexagonal or square head at one ends and screwed the other or screwed both ends each screwed end to be fitted with washers complete all as specified and directed.
M&L Pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
M&L Hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
M&L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finished fair and even all as specified and directed.
M&L Prepration of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.
M&L Preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paintover a coat of red oxide primer complete all as specified and as directed
M&L for Providing, PCC (1:2:4) type B-1, (using 20 mm graded stone aggegate) as in kerbs,stops, rounded or chamfered on edges of carriageway including necessary formwork complete all as specified and as directed
M/s NARAYAN MUKHERJEE & CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .