Tamil Nadu

Active

Works

Civil Works - Buildings

Name board, Pre-Fab workshop, Nagapadi

Higher Education

Nagapadi | Tiruvannamalai, Tamil Nadu

Amount: ₹4 LCloses: 5 Oct 2026

Timeline

Published17 Sept 2026
Closes5 Oct 2026
Bid Opening5 Oct 2026

Tender Value

₹4 L

EMD Value

₹4,000

Closing Date

5 Oct 2026, 3:00 pm

Tender Inviting Organisation

Name

The Executive Engineer, PWD.,

Address

The Executive Engineer, PWD., Projects Division, Vellore-2

Work Description

Providing Name board, Die cast letter and marking arrangements for Pre-fabricated workshop building for Centres of Excellence in Government Polytechnic College at Nagapadi in Thiruvannamalai District.

Tender Information

Tender ID

2026_HE_705064_1

Reference Number

8TEDV-2/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Lump-sum

Period of Work

90 days

Location

Nagapadi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

6 documents required · 6 mandatory

Fee/PreQual/Technical/Finance

RequiredPWD Registration (Live) (.pdf)

RequiredGST Registration, GST last month paid (.pdf)

RequiredIT Balance sheet (.pdf)

RequiredExperience Certificate 75 percent of value of work done (.pdf)

RequiredConditions (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹4,000

Important Dates

Last Activity

17 Sept 2026

Published

17 Sept 2026

Bid Opening

5 Oct 2026

Download Starts

17 Sept 2026

Download Ends

5 Oct 2026

Submission Starts

17 Sept 2026

Clarification Period

17 Sept 2026 - 5 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (11 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying and Fixing of Aluminium Die Cast Letters of following size of approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes. The rate is inclusive of all charges such as conveyance of letters, fixing the letters to the wall tiles (or) granite etc., and with necessary scaffolding charges and redoing the wall to the original condition etc, complete as directed by the departmental officers.
1.01	Aluminium Die Cast Letters of size 12"	34	Nos	1,572	₹53,448
1.02	Aluminium Die Cast Letters of size 9"	34	Nos	1,179	₹40,086
1.03	Aluminium Die Cast Letters of size 10"	16	Nos	1,323	₹21,168
1.04	Emblem - 24"	1	Nos	18,250	₹18,250
1.05	MS LOGO	3	Nos	17,300	₹51,900
2	Providing two legged scaffolding using 15cm diameter blue-gum posts or casuarina posts of best quality bamboo posts of 4m over all length (3m+0.5m projection+0.5m into the ground) the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at 2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc., in a complete form using coir and nails 1m run.	20	Rm	1,090.65	₹21,813
3	Supplying and fixing of Name board for the building using 3mm thick foam sheet over which blue colour over which acrylic sticker has to be pasted. The details of the name board such as texts, font shapes, styles and sizes as provided by the departmental officers. The rate inclusive of material charges, labour charges, conveyance, adhersives and other charges etc.,	28,800	cm2	1.4	₹40,320
4	Supplying and fixing of Aluminium ladder of 7m height with necessary fittings etc., complete as directed by the departmental officers.	7	Rm	3,014.7	₹21,102.9
5	Fabricating, Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.70m x 2.10m. The outer frames Outer frame:63.50 x 38 x 3mm @ 1.72 kg/m, Centre mullions:63.50 x 38 x 3mm@ 1.55 kg/m, Alu.Clips:17.27 x 17.15 x 1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27 x 17.15 x 1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC Column, masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.	18.3	Rm	3,553.9	₹65,036.37

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.62 MB

Work Item Documents

NagapadipfTenderconditions.pdf

Tender Documents • 0.23 MB

BOQ_847504.xls

BOQ • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying and Fixing of Aluminium Die Cast Letters of following size of approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes. The rate is inclusive of all charges such as conveyance of letters, fixing the letters to the wall tiles (or) granite etc., and with necessary scaffolding charges and redoing the wall to the original condition etc, complete as directed by the departmental officers.
1.01	Aluminium Die Cast Letters of size 12"	34	Nos	1,572	₹53,448
1.02	Aluminium Die Cast Letters of size 9"	34	Nos	1,179	₹40,086
1.03	Aluminium Die Cast Letters of size 10"	16	Nos	1,323	₹21,168
1.04	Emblem - 24"	1	Nos	18,250	₹18,250
1.05	MS LOGO	3	Nos	17,300	₹51,900
2	Providing two legged scaffolding using 15cm diameter blue-gum posts or casuarina posts of best quality bamboo posts of 4m over all length (3m+0.5m projection+0.5m into the ground) the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at 2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc., in a complete form using coir and nails 1m run.	20	Rm	1,090.65	₹21,813
3	Supplying and fixing of Name board for the building using 3mm thick foam sheet over which blue colour over which acrylic sticker has to be pasted. The details of the name board such as texts, font shapes, styles and sizes as provided by the departmental officers. The rate inclusive of material charges, labour charges, conveyance, adhersives and other charges etc.,	28,800	cm2	1.4	₹40,320
4	Supplying and fixing of Aluminium ladder of 7m height with necessary fittings etc., complete as directed by the departmental officers.	7	Rm	3,014.7	₹21,102.9
5	Fabricating, Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.70m x 2.10m. The outer frames Outer frame:63.50 x 38 x 3mm @ 1.72 kg/m, Centre mullions:63.50 x 38 x 3mm@ 1.55 kg/m, Alu.Clips:17.27 x 17.15 x 1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27 x 17.15 x 1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC Column, masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.	18.3	Rm	3,553.9	₹65,036.37

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supplying and Fixing of Aluminium Die Cast Letters of following size of approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes. The rate is inclusive of all charges such as conveyance of letters, fixing the letters to the wall tiles (or) granite etc., and with necessary scaffolding charges and redoing the wall to the original condition etc, complete as directed by the departmental officers.

1.01

Aluminium Die Cast Letters of size 12"

Nos

1,572

₹53,448

1.02

Aluminium Die Cast Letters of size 9"

Nos

1,179

₹40,086

1.03

Aluminium Die Cast Letters of size 10"

Nos

1,323

₹21,168

1.04

Emblem - 24"

Nos

18,250

₹18,250

1.05

MS LOGO

Nos

17,300

₹51,900

Providing two legged scaffolding using 15cm diameter blue-gum posts or casuarina posts of best quality bamboo posts of 4m over all length (3m+0.5m projection+0.5m into the ground) the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at 2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc., in a complete form using coir and nails 1m run.

1,090.65

₹21,813

Supplying and fixing of Name board for the building using 3mm thick foam sheet over which blue colour over which acrylic sticker has to be pasted. The details of the name board such as texts, font shapes, styles and sizes as provided by the departmental officers. The rate inclusive of material charges, labour charges, conveyance, adhersives and other charges etc.,

28,800

cm2

1.4

₹40,320

Supplying and fixing of Aluminium ladder of 7m height with necessary fittings etc., complete as directed by the departmental officers.

3,014.7

₹21,102.9

Fabricating, Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.70m x 2.10m. The outer frames Outer frame:63.50 x 38 x 3mm @ 1.72 kg/m, Centre mullions:63.50 x 38 x 3mm@ 1.55 kg/m, Alu.Clips:17.27 x 17.15 x 1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27 x 17.15 x 1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC Column, masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.

18.3

3,553.9

₹65,036.37