Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 CrAccepted-AOC 322 AGGARWAL MODERN BAZAR C 33 LAWRENCE ROADS DELHI 110035 | DELHI | NORTH WEST DELHI | DELHI | 110035 | ₹1.3 Cr Quoted ₹1.4 Cr | L1 | Accepted-AOC Accept |
| 2 | L2₹1.4 Cr+₹8.0 L (5.90%)Rejected-AOC 46 LOWER GROUND FLOOR CHARMWOOD PLAZA EROS GARDEN FARIDABAD HARYANA 121009 | FARIDABAD | FARIDABAD | HARYANA | 121009 | ₹1.4 Cr+₹8.0 L (5.90%) | L2 | Rejected-AOC Reject |
| 3 | L3₹1.5 Cr+₹11.5 L (8.49%)Rejected-AOC | ₹1.5 Cr+₹11.5 L (8.49%) | L3 | Rejected-AOC Reject |
Tender Value
₹1.2 Cr
EMD Value
₹2.4 L
Closing Date
23 Nov 2020, 3:00 pmClosed
XEN M/GARH W.S MECH. DIVISION, NARNAUL
Executive Engineer M/GARH W.S MECH. DIVISION, NARNAUL
Replacement of 05 Cs to 20 Cs VT Axial Flow Pumps with connected electric equipments at Pump Houses MC-1 to 5 Of M.Garh Canal
2020_HRY_149302_8
5775-90/9-A dated 05.10.2020
Open Tender
Pumps/Motors
Works
270 days
XEN M/GARH W.S MECH. DIVISION, NARNAUL
Please refer Tender documents.
4 documents required · 4 mandatory
₹15,000
₹2.4 L
XEN M/GARH W.S MECH. DIVISION, NARNAUL
1 Jun 2021
30 Oct 2020
24 Nov 2020
30 Oct 2020
23 Nov 2020
30 Oct 2020
10 Nov 2020
Amount
Replacement of 20 Cs VT axial flow pump including delivery pipe & bend (MS IS 2062 Gr. FE 410 WA) including flanges, welding, nut/bolts, siphon breaker valve as per site and erection & commissioning including left over items with epoxy coating inside & outside as per specification approved by technical committee as attached (Annexure – A) ( P/H- MC-1 for Chiriya Dy= 02 No, MC-3 for Bassi=01No & Aulant Dy=01No)
Replacement of 12.5 Cs VT axial flow pump having lift 22.46' including delivery pipe & bend (MS IS 2062 Gr. FE 410 WA) including flanges, welding, nut/bolts, siphon breaker valve as per site and erection & commissioning including left over items with epoxy coating inside & outside as per specification approved by technical committee as attached (Annexure – A) (MC-1 for Bhurthla Disty)
Replacement of 10 Cs VT axial flow pump including delivery pipe & bend (MS IS 2062 Gr. FE 410 WA) including flanges, welding, nut/bolts, siphon breaker valve as per site and erection & commissioning including left over items with epoxy coating inside & outside as per specification approved by technical committee as attached (Annexure – A). MC-4 ( Kheri disty.)
Replacement of 5 Cs VT axial flow pump including delivery pipe & bend (MS IS 2062 Gr. FE 410 WA) including flanges, welding, nut/bolts, siphon breaker valve as per site and erection & commissioning including left over items with epoxy coating inside & outside as per specification approved by technical committee as attached (Annexure – A). ( MC-4=2 No for 1 No.each Rampuri Dy.& Kheri Dy. 1 No., MC-5 for Lawan Disty.=01 NO)
Supply, Erection and commissioning of Solid shaft motor of capacity 100 HP, 980 RPM, 3 phase ,440/415 Volt suitable for 20 Cs. V.T. axial flow pump having lift 20.98’ type vertical flange mounted as per specification approved by technical committee (Annexure-B) .( MC-3 for Bassi=02No )
Supply, Erection and commissioning of Solid shaft motor of capacity 60 HP ,970 RPM, 3 phase ,440/415 Volt suitable for 20 Cs. V.T. axial flow pump having lift 13.38’ type vertical flange mounted as per specification approved by technical committee (Annexure-B) . ( MC-3 for Aulant DY=02No )
Supply, Erection and commissioning of induction motors of 50 HP suitable for 10 Cs VT axial flow pumps, 1470RPM, 3.3 KV voltage, 3 phase, 50 Hz bearing SKF / FAG as per specifications (Annexure-B) and site requirements. ( MC-4 for Rampuri Dy.)
Supply, Erection and commissioning of induction motors of 35HP suitable for 10Cs. V.T. axial flow pumps, ,1470 RPM,410 voltage, 3 phase 50 Hz bearing SKF/FAG as per specificationS (Annexure - B) and site requirements. ( MC-5 for Lawan Dy. )
Supply, Erection and commissioning of induction motors of 20 HP suitable for 5 Cs VT axial flow pumps, 1455RPM, 410V voltage, 3 phase, 50 Hz bearing SKF / FAG as per specifications (Annexure-B) and site requirements.( MC-4 Rampuri Dy.=1 No & Kheri Dy.=02No,MC-5 lawan Dy=01 No)
Providing and Commissioning of 60 HP starter with ATS dry type including connections and small items as thimbles, nut/bolts ,lugs etc for VT pump 12.5 Cs as per specification/make approved by technical committee. (MC-1=03Nos ) for Bhurthala disty.
Providing & commissioning of Starter for 15/20 HP motor fully automatically air brake type star delta complete in all respect and all other item if any including with as per specification/make approved by technical committee. (MC-4 =1 No for Rampuri & for Kheri Dy.=1 No )
Credit of Old Scrap of Iron (Actual weight of old scrap will be measured by the committee)
Credit of Old Scrap of Gun Metal (Actual weight of old scrap will be measured by the committee)
Credit of Old Scrap of Copper (Actual weight of old scrap will be measured by the committee)
Credit of Old Scrap of Aluminum (Actual weight of old scrap will be measured by the committee)
Third party inspection TPIA Charges
ace marketing pvt ltd
Sahil Engg. Works
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .