Providing and fixing of metallic false ceiling and luminous arrangement at officer club at Bishrampur town ship of Bishrampur Area.

Amount

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

supply .installation .testing.and commissioning COB led spot light ing complete with elctronic driver .heat sink capacitor and other accessories incluconnection .earthing etc complete as per specification ..should be grater than 0.9 led chip efficiency ratio .>100 luminers /watt ....40 watt complete job as per instruction of engineer in charge.

Point wiring with pvc insulated cable with cooper coductor 1.5 mmsqmmisi marrked in surface rigid pipe non metallic conduit of suitable size isi marketed as required as per specificatin for light/exhaust fan point short wiring as per instruction of engineer in charge.

wiing for sub main with pvc insulated cable with cooper conductor 2x2.5 sqmm in 20mm pvc conduit/casing capingi/c connection painting etc. as per instruction of engineer in charge.

wiing for sub main with pvc insulated cable with cooper conductor 2x4 sqmm in 20mm pvc conduit/casing capingi/c connection painting etc. as per instruction of engineer in charge.

supplying and fixing metal box (nominal 0for concealed with suitable size of prefix sheea of backe lite sheet covering the front i/c painting etc as required size 200x250x75mm complete job as per instruction of engineer in charge.

S/F 3 pole MCCB 25mm Amp Isi markedincluding drilling hole in cubical panal ,marking connection etc as required as per instruction of engineer in charge.

Demolishing thatch roofing including mats, bamboo, jaffari etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead

Total impact of GST for the purpose of CTC

RAJESH KUMAR SAHU