8226-REPAIRS TO BOUNDARY WALL, COMPOUND WALL, JAFRI WALL, PLASTERING ,FENCING AND CONNECTED WORKS INSIDE AND OUTSIDE OTA CHENNAI UNDER GE STM

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Brickwork with subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

Broken glass coping on top of walls in cement mortar 1:3

Cement concete 1:2:4 type B1 using 20 mm graded stone aggregate as in bands, seismic and other similar bands incl. weathering slightly rounded or chamfered angles and throating as directed incl. necessary use and waste of form work all as directed.

Material and Labourfor Precast cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate louvres and jallies, 45 mm thick (measured solid) incl. all moulds set in CM 1:4

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces finished with even and smooth without using extra cement in CM 1:4

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces finished with even and smooth without using extra cement in CM 1:4

Material and Labourfor Preparation of new plastered surfaces and applying two coat of cement base paint over a coat of alkali resistant priming paint on external surfaces of walls.

Material and Labourfor Preparation of new plastered surfaces and applying two coat of oil bound distemper over a coat of chalk whiting on internal surfaces of walls.

Preparing of new plastered surfaces of ceiling and applying two coat white wash all as specified and directed

Material and LabourPreparing of new plastered surfaces and applying three coat of white wash on walls

Dismantling fencing / wire mesh, any type

Taking down steel gates from its position and repair the same including thorugh tightning setting alignment properly including welding additional stifferners, braces, pintol hinges locking arrangement etc and erecting the same back in position after applying one coat of synthetic enamel paint in area of gate n.exc 5.00 Sqm all as directed(Note : Necessary MS sections such as angle, pipe, bars, flats etc will be measured and paid seperately

Dismantling Cast iron work of any description

Supply and fix Chain link mild steel galvanised fencing, PVC coated 60 x 60 mm aperture and 10 gauge wire fixed with nuts and bolts etc all as directed.

Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long with diameter of shank 11 to 15mm all as specified

Supply and fix framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165

Supply and fix 10mm dia MS round bars including welding with necessary lapping all as directedGde IS-432 (Part-I )

Material and Labour for Preparation of new surfaces of any description over 10 cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces.

Supply and fix in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc including dismentling of UNSV barbed wire. as directed (each line wire to be measured)

Mariammal Constructions

Raju Builders

M/s C KESAVAN

ASHWIN ASSOCIATES

G.JANAKIRAMAN CO

Sri Mahalakshmi Enterprises

D Subramani and Sons

BALA BUILDERS