Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.1 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹31.6 L+₹2.5 L (8.50%)Rejected-Finance 25 13 1 AMBEGAON PATHAR PUNE 411046 | PUNE | MAHARASHTRA | 411046 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹31.9 L+₹2.8 L (9.57%)Rejected-Finance N A | NA | NA | 121004 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹36.6 L+₹7.5 L (25.6%)Rejected-Finance B 1 2 MAHESH NAGAR AMBALA CANTT 133001 HRY | AMBALA CANTT | AMBALA | HARYANA | 133001 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹37.3 L+₹8.2 L (28.1%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
18 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN- 68 OF 2022-2023 REPAIRS TO JOINERY, EXTERNAL AND INTERNAL FINISHING AND CERTAIN WKS TO JCOS, ORS ACCN AND MISC AREA IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (N) PUNE.
2022_MES_570975_1
GE (N) P/TOKEN- 68 OF 2022-2023
Open Tender
Civil Works
Item Rate
240 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹90,000
Yes
18 Mar 2023
23 Dec 2022
25 Jan 2023
23 Dec 2022
18 Jan 2023
6 Jan 2023
24 Dec 2022 - 28 Dec 2022
Amount
Dismantling floor, hearth or wall tiling/paver block/chequered tiles including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.
M&L for double charged vitrified ceremic tiles 10 mm thick of approved shade/ wooden texture (square/rectangular) polished, area of each tile exc. 0.18 sqm not exceeding 0.36 sqm, in flooring etc , laid over and including screed bed of 15 mm thick cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade complete all as specified and directed.
M&L for double charged Vitrified ceremic tiles 10mm thick of approved shade/Wooden texture as in vertical surfaces, skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade over and including backing coat of 10mm thick in cement mortar 1:3 complete all as specified and directed.
M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base including demolition of existing PCC and removing rubbish off the premises complete all as specified and directed.
M&L for 25mm thick coloured Glossy rubber moulded Chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.20sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.
M&L Machine pressed rubber moulded glossy finish precast concrete interlocking paver block any shape and size confirming to IS- 15658-2006 of 60 mm thk, M35 gde in floor/ pavment laid over and including 30 mm thick crushed sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. Note- (i) Manufacturer test certificate shall be submitted along wth Sample.
M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including screed bed of 15 mm thick cement mortar 1:4 complete all as specified and as directed.
M&L for Glazed coloured ceramic tiles in vertical surface 300mmx200mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including backing coat of 10 mm thick in cement mortar 1:3 complete all as specified and as directed.
Material and labour for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.
Material and labour for Hilighter coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.
M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like over and including 15 mm thick screed bed of CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed.
M&L for Machine cut cudappah stone slab 20 to 25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed.
Labour only for full round moulding to 18 to 20mm thick granite slab all as directed by Engineer-in-Charge.
M&L 40mm thick plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in floor/ court yard, finished even and smooth with using extra cement including demolition of existing cement concrete removing rubbish off the premises complete all as specified and as directed.
Supply and fix Glass dividing strips 3mm thick and 38mm width of strip complete all as specified and as directed.
M&L 75 mm thick plain cement concrete (1:3:6) type C-1 using 20mm graded stone aggregates as in plinth protection, concrete shall be laid in alternate bays not exc 3.0m in length, finished even and fair including demolition of existing cement concrete removing rubbish off the premises complete all as specified and as directed.
M&L Brick work with fly ash old size bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6 including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed.
Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement with sagol finish complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement on brick/ stone wall, complete all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered or unplastered surfaces and applying two coats of cement base paint over a coat of cement primer all as specified and directed.
M&L for preparation of new plastered or unplastered wall surfaces of any description over 10cm girth or width not otherwise described and applying two coats of acylic distemper over a coat of primer all as specified and directed.
Material and labour for removing of plants, bushes, weeds with roots from walls, roof, chajja, canopy, parapets, roof kerbs, around water tanks, stagings, outlets junctions of water pipe lines , waste water pipe, bends and filling the disturbed area with cement concrete (1:1.5:3) or cement mortar (1:3) using water proofing compound as per manufacturer's instruction and making the patch finished as per surroundings complete all as specified and as directed. (Note: Rate quoted is deemed to be included for scaffolding, safety measures required for working on or up to height of 15 metres vertical slopes)
M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces ready to receive new finish complete all as specified and directed.
M&L for complete removal of existing treatment on ceilings using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces ready to receive new finish complete all as specified and directed.
M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces.
M&L for applying wall care putty 1 to 1.5 mm thick on celing surfaces.
M&L for applying one coat of alkali resistant priming paint on wall.
M&L for applying one coat of alkali resistant priming paint on celing.
M&L for two coats of acrylic distemper of approved tint on wall surfaces
M&L for two coats of acrylic distemper of approved tint on ceiling surfaces
Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.
M&L for one subsequent coat of acrcylic distemper on wall complete all as specified and as directed.
Preparation of old treated plastered/ false ceiling surface of ceiling by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.
M&L for preparation of old decorated surfaces of any description over 10cm girth or width not otherwise described and applying two coats of white wash on walls
M&L for preparation of old decorated surfaces of any description over 10cm girth or width not otherwise described and applying one coats of white wash on ceiling
M&L for preparation of old surfaces of wood and wooden based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint.
M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint.
M&L for preparation of old painted wooden/asbestos surface in ceiling and applying one coat of synthetic enamel paint
M&L for preparation of old treated plastered / unplastered surfaces by brooming down with steel brush and applying one coat of cement base paint complete all as specified and as directed.
M&L for preparation of old treated plastered / unplastered surfaces by brooming down with steel brush including removal of moss, fungus, green growth of vegetation,make surface free from loose particles, oil stains etc etc and applying two coat of cement base paint complete all as specified and as directed.
Material and labour for preparation of old treated plastered or unplastered/ concrete surfaces by brooming down with steel brush over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of plastic emulsion paint complete all as specified and as directed.
Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of lustre paint (Oil Based) of ASIAN paint or equivalent of Berger/ Nerolac complete all as specified and as directed.
Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying two coats of lustre paint of ASIAN paint or equivalent of Berger/ Nerolaccomplete all as specified and as directed.
Material and labour for preparation of old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler and applying one or more coats of french polish till the desired finish is obtained complete all as specified and as directed.
M&L for Complete removal of Existing paint/ treatment on wooden surface by means of Scrapping/ paint stripping agent/ power sander/burning and sanding the surface to achieve smooth surface and applying two or more coats of malemine polish till desired finish is achieved including application of hardner and pigment of desired Colour all as specified and as directed.
M&L for Complete removal of Existing paint/ treatment on Steel surface by means of Scrapping/ paint stripping agent/ power sander/buring and sanding the surface to achieve smooth surface and applying two coats of synthetic enamel paint over a coat of Red Oxide Primer all as specified and as directed.
Material and labour for scrapping out old treated wooden surfaces in floors, staircase etc ,sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying two or more coats of melamine polish with spray guns, compressor etc complete till glossy surface is obtained complete all as specified and as directed.
All as per serial item No.50 here-in-before but as in wooden doors, window and wall paneling.
M&L for preparation of surfaces and applying one coat of 100% acrylic exterior emulsion paint to mangalore tiles, roof, parapet wall ,floor etc, on buildings complete all as specified and as directed by Engineer-in-charge.
Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete including dismantling unserviceable asbestos/ Galavalume sheet (Corrugated, Semi corrugated etc.) sheets all as specified and as directed.
S&F in repair for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, fixed with L-type or J-type or cranked hook bolts etc. complete including dismantling unserviceable asbestos cement (Corrugated, semi corrugated etc)all as specified and as directed.
S&F in repair for 6mm thick asbestos cement, two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts etc. complete including dismantling unserviceable cement ridge all as specified and as directed.
Dismantling structural steel work including doors, gates, framed truss etc. complete all as specified and as directed.
Supply and fix for mild steel work in tubular /square/rectangular trusses , purlins etc including special shaped washer etc. complete using hollow mild steel sections round, square or rectangular for structural use as in main and cross beams, hip and jack rafters, purlins conforming to IS 4923:1997 fixed with angle cleats or other connecting plates complete all as specified and as directed.
S&F mild steel rolled section as in main cross beams purlins, rafters and running rails fixed independently with angle iron cleats or connecting pieces conforming to Gde Fe-410-W, Gde E-250, quality A complete all as specified and directed.
M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.
M&L for preparation of new steel surfaces of any description over 10cm girth or width and applying redoxide primer and two coat of synthetic enamel paint.
Taking down door shutter and refixing shutters after making necessary repair of any description exc 1.0 Sqm nut not exc 2.0 Sqm each.( Note :- Builders hardware used in repairs shall to measured separately)
Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed
Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and as directed.
Taking down shutters of any description, area not exc.1 sqm each complete all as specified and as directed.
Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as specified and as directed.
Taking down shutters of any description, area exc.2sqm each complete all as specified and as directed.
Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc including taking out old ventilators complete all as specified and directed.
Supply and fix for aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc includung taking out old windows complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
S&F in repair aluminum powder coated partition using ‘Jindal’ aluminum SP/DP section with 5mm thick tinted glass with PVC rubber bidding/12mm thick prelaminated particle board fixed with glazing clips etc/ both including taking down existing partition complete all as directed by Engr-in-Charge.SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407
S&F in repair fully glazed single/double leaf openable door, using aluminium powder coated sections on door floor spring, pivots, with 5 mm thick glass in panels fixed with aluminium glazing clips section No. 19381 and 19352 and PVC rubber beading all around including with 1” interlock and handle, two lever door lock, sliding wheel etc sections as given below and all as specified and directed by Engineer-in-Charge.Top-19528, Middle – 19575, Bottom – 19530, Vertical – 19526, 1” Interlock (20939), 1” Handle (20602)
Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed
Supply and fix for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed.
Supply and fix for stainless steel wire cloth 0.63 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed
Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Supply and fix for factory made solid Panel PVC machine pressed moulded door shutter of any colour, 28 to 30mm thick , with 2, 4 or 6 raised panel design with 4mm thick moulded PVC sheet on the front face and 4mm moulded prelam colour PVC sheet on back face wirth wood free EPS, fixed in frame at site as per specification and drawing including fittings complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed colour PVC sheet & edges will be painted to match with printed sheet , reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing including taking down chowkats/frames complete.
S&F 2nd class hardwood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including taking down chowkats/frames and 02 coats of synthetic enamel paint over a coat of pink primer o two sides of chowkats and one coat of black bituminious paint on one side of chowkats complete.
M&L Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as specified and directed.
M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing and as specified and directed.
M&L 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site all as specified and directed.
Taking Down Wall panelling/ PVC Panelling, in any shape and size existing all as directed.
S&F in repair for MS handle for steel window all as spd and directed
M&L for repair to steel window side hung or top hung shutters by welding, greasing , replacement of projected type hinges with box hinges complete etc all as directed
S&F factory made 100% solid wood polymer composite (WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum complete all as specified and directed.NOTE: During fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. Make: Rajshri/ Sintex/Duraplast/Accucell
Supply and fix for 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked, complete all as specified and as directed.
Supply and fix for 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked, complete all as specified and as directed.
Supply and fix for 200mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.
Supply and fix for 150 mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.
Supply and fix for butt hinges, 100mm size, mild steel cold rolled, medium weight complete all as specified and as directed.
Supply and fix for 75mm size butt hinges, extruded brass with mild steel hinge pin, bright polished and fixed type D-11 complete all as specified and as directed.
Supply and fix for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.
Supply and fix for 100mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed.
Supply and fix for 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.
S&F in repairs chromium plated two way bib cock with wall flange 15mm dia Cat No. QQT 7041 of make Jaquar ‘QUEEN'S series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.
S&F in repairs chromium plated fittings angular stop cock with wall flange 15mm dia Cat No. QQT 7053 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.
S&F in repairs chromium plated pillar cock 15mm dia Cat No. QQT 7011 of make Jaquar ‘‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.
S&F in repairs chromium plated single towel rail 600mm long including built in side brackets ,Cat No. AQN-7711 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.
S&F in repairs chromium plated toilet paper holder ,Cat No. AQN-7751 of make Jaquar ‘‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.
S&F in repairs chromium plated towel ring round, Cat No. AQN-7721 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.
S&F in repairs chromium plated wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with wall flange with 115mm long bend pipe, connecting legs ,Cat No. QQT-7281 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.
S&F in repair 5 mm thick float glass looking mirror complete all as specified and as directed.
Supply and fix in repair brass chromium plated mixer for mixing hot and cold water screwed down high pressure for iron pipe of 15mm bore complete all as specified and as directed.
Supply and fix in repairs, chromium plated long body bib cock with wall flange 15mm dia Cat No.FUS 29037 of make Jaguar or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in reapir 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed
Taking up or down 15mm dia steel tubing and connections, including cleaning for re-fixing or removal all as directed.
Taking up or down 20mm dia steel tubing and connections, including cleaning for re-fixing or removal all as directed.
M&L for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors in repairs complete all as specified and as directed.
M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and as as diirected.
Refixing 20mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and as directed.
Refixing 15mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and as directed.
M&L for GI tubing 25mm bore medium grade with all fittings & fixed complete to walls & ceiling or laid in floors including taking up or down steel tubing and connections
M&L for GI tubing 32mm bore medium grade with all fittings & fixtures complete laid in trenches fixed including taking up or down steel tubing and connections
S&F in repairs 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as spd
S&F in repairs 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as spd
S&F in repairs vitreous chinaware wash hand basin, size 550x400 mm chromium plated,including CP waste coupling, chain and plug, waste fittings, union and waste pipe 32 mm dia of required length and all necessary inlet & outlet connections complete fixed in repairs. Make - Hindware or equivalent.
S&F in repairs brass Mortice lock, vertical type, size 100 mm 4 Levers complete all as specified and as directed.
S&F in repair vitreous china-ware wash down water closet white including connection to drain or outgoing pipe and to PVC flushing pipe, antisyphonage pipe, of approval Make and all necessary fittings etc complete all as directed and specified incl PVC seat cover.
S&F in repair vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including concrete bedding including 32mm PVC flush pipe, all internal fitting, inlet, outlet pipe connections etc. complete all as specified and as directed.
Material and labour for 8 to 10 mm thick Gypsum Board with PVC laminated false ceiling board on and including GI powder coated grid work of size 605mm x 605mm with using 32.0 mm x 23.5mm x 1.5 mm thick main tee, 26.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways including taking down existing complete all as specified and as directed. Make :- Armstrong, Diaken, Gyprock, New Age. Note: Height of ceiling is above 5 metres.
Material and labour for false ceiling with 10mm thick 600mm x 900mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of POP with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surfaces and applying two coats of oil bound/ acrylic distemper over a coat of primer including taking down existing complete all as specified and as directed. Note: POP ceiling to be made in two/ three tier design.
Material and labour for plaster of paris decorative cornices/ moulding to the pattern as approved, cross sectional area exceeding 13 Sq.cm and not exceeding 25 Sq.cm and fixed in decorative pattern including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer matching with the colour of ceiling complete all as specified and as directed.
Supply and fix for fibre glass reinforced translucent corrugated/plain sheeting 2.00 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc including taking down existing complete all as specified and as directed.
Supply and fix in repairs for brackets for drapery/ curtain rod, decorative type, stainless steel as per sample kept in GE (N) Pune office complete all as specified and as directed.
Supply and fix in repairs for drapery/ curtain rod of 25mm dia, decorative type, stainless steel complete all as specified and as directed.
Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down of existing complete all as shown on drawing and as directed.
Material and labour for 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing complete all as shown on drawing and as directed.
Material and labour for 6mm thick plywood, grade BWR, type BB, number of ply 5 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern incuding taking down complete all as shown on drawing and as directed.
Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.
Material and labour for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 3 Sq.cm but not exc. 6 Sq.cm complete all as specified and as directed.
Material and labour for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 6 Sq.cm but not exc. 13 Sq.cm complete all as specified and as directed.
S&F stainless steel power hinges suitable for shutter of not exc 0.50 sqm area all as specified and directed.
S&F stainless steel hinges 50 mm long for cupboard shutter all as specified and as directed.
S&F 75 mm long stainless steel handles for cupboard shutter complete all as specified and as directed.
Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed:- (a) Complete Removal of existing waterproofing treatment / membrane including screed bed/ plaster and removing the material where directed to a distance not less than 500m and cleaning the roof surface with water (b) Providing 10 mm thick plaster on roof surface in CM (1:4) with using WPC as per manufacturers instructions. (c) Cleaning the plastered surface and applying Oil Based Bituminous primer @ 0.25 ltrs/ Sqm. (d) Applying hot blown bitumen of grade 85/25 @ 1.20 Kgs/ Sqm. (e) Laying APP Modified bituminous membrane 3mm thick weighing not less than 3.50 Kgs/ Sqm with non woven polyester mat as reinforcement with plain finish laid over hot bitumen on roof surface. (f) Applying two coats of bituminous aluminium paint on APP membrane surface. (g) Overlaps (end and longitudinal) shall be finished by torch application. Note No (i) : Overlaps shall be provided as under End Over Laps - 150mm Longitudinal overlaps 100mm. (ii) : Waterproofing Compound shall be measured and paid separtely under relevant item.
Supply only Liquid water proofing compound complete all as specified and as directed.
Demolition of cement Concrete any description and in any position from Roof, walls and floors all as directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in roof padding, of any thickness finished fair and even complete all as specified and as directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position for capacity of tank exc.500 litres and n.exc. 1000 litres complete all as directed
Dismantling of old wooden flooring planks/ boarding removing serviceable planks to store and removal of rubbish outside MD land at the location decided by Engineer-in-Charge complete all as specified and as directed.
M&L for 25mm thick 1st Class Hardwood planks (Boarding) Teak wood of required size or as approved size, Cross sectional area not less than 50 Sqcm in flooring with interlocking arrangement of tongue and groove joint and applying two coats of melamine filler complete till fine glossy finish is obtained complete as per manufacturers instruction.
Refixing of old wooden flooring obtained from dismatling after cutting damaged edges, burning of old paint if any, and preparation of wooden surfaces and applying two or more coats of melamine polish using spray gun over a coat of sealer and melamine filler complete till fine glossy finish is obtained complete all as specified and as directed.
Dismentling wooden scantling of any size and position all as directed.
Material and labour for 2nd class hard wood, clean sawn, in scantling timber work all as specified and as directed.
All as per serial item No. 144 here-in-before but except timber.
S&F in repairs hand shower (health faceut)ABS body with 1m long flex tube in chrome finish and wall hook cat part no ALD CHR 585 of make Jaquar ‘ or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.
S&F in repairs soap dish holder cat part no AKP 35173P of make Jaquar ‘ or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.
S&F in repairs overhead shower 150X150mm (body and plate stainless steel) with shower arm OHS CHR 1605 of make Jaquar ‘ or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.
Material and labour for 4mm thick one side decorative group match veneer with melamine polishing including taking down existing complete all as specified and as directed.
S&F in reapirs Designer AC Eaves/ Weather Boarding 12mm thick , any size shape and design as approved by GE including taking down existing boarding complete all as specified and as directed.Make: V-Board(Visaka Industries Ltd)/Everest
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
Sai Construction
J P ASSOCIATES
ANIL CONSTRUCTION CO.
SAGAR ENTERPRISES
L.T Associate
M/s Asrani and sons
Parhar Enterprise
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .