Construction of Outer Protection wall at Pani Kotha, Diu

Amount

Works

Making holes upto 20mm dia. 300mm long in any RCC members by diamond Core Cutting machine of HILTI or equivalent including disposing the debries,all works refinishing of the GP-2 pipe grout complete with water proof testing etc completed as directed by E.T.C/PMC. (Renforcement rebar upto 16mm dia)

White stone bela masonry block in course in superstructure with stone of approved quality in C.M. 1:5 (1 cement: 5 fine sand) including racking the joints etc. complete.

Providing and Laying design mix cement concrete M25 grade using minimum cement 400 kg/cum and graded crushed stone aggregates 40 mm nominal maximum size in the section of wharf wall abutment , wing wall, return wall or such other structure using vibrator, excluding the cost of reinforcement but including form work, all lead and lift complete as per drawing and technical specifications.

Providing HYSD FE 500D bar reinforcement for RCC work including bending, binding and placing in position complete upto floor two level.

Providing fusion bonded Epoxy coating not less than 175 micron thickness and up to 300 micron to reinforcement bars as per IS-13620-1993/ASTM-775 M including testing of coating at plant and all taxes (A) 10mm to 16mm dia bar

Providing & Applying Lime Plaster: Providing & Applying 35mm - 40mm (average thickness 37.50 mm) lime plaster (Backing coat) on bela stone masonary walls using lime, coarse sand, stone dust and adhesives as per traditional practice, mortar mix of 1:2:1.5 (1 lime, 2 coarse sand, 1.5 Lime stone dust) and appropriate adhesives i.e. jaggery syrup, methi powder, yellow oxide, geru powder,dolomite (marble powder) etc. as binders, colour pigments, insecticide and fungicide. Applying lime plaster incl. curing, consolidation, finishing complete with all materials, labour, tools and tackels.

Providing & Applying Lime Plaster: Providing & Applying 25mm lime plaster (Repairing ornamental plaster works to match with the existing design ) (1st Coat of13mm+ 2nd Coat 12mm) on bela stone masonary walls using lime, coarse sand, Bela stone dust & Marble Dust as per traditional practice jaggery syrup, methi powder, mortar mix of (1 slaked lime,3 coarse sand, 1.5Bela stone dust, 0.5 Marble Dust) and appropriate adhesives i.e. jaggery syrup, methi powder, as colour pigments, Applying lime plaster (1st Coat of13mminculding of motar filling of raked joints also+ 2nd Coat 12mm before applying of lime plaster the surface must be wash with water after and incl. curing, consolidation, finishing complete with all materials, labour, tools and tackels as directed as Engineer- in- Charge

Providing & Applying Lime Pointing (Raised pointing - false): Providing & Applying 6mm (or more - upto 8 mm) lime pointing on textured plaster walls using lime, fine sand, stone dust and adhesives as per traditional practice, mortar mix of 1:2:1.5 (1 lime, 2 fine sand, 1.5 stone dust) and appropriate adhesives i.e. shesh gunder syrup, methi powder, etc. as binders, insecticide and fungicide. Applying lime pointing consolidation, finishing complete with all materials, labour, tools and tackels.

Providing and applying of Permeable, water based Mature Lime wash finish of interior and exterior grade used for conservation and restoration of historical building, formulated by Mature Lime Putty with fillers, After the cleaning of surface and removing any loose or flaking material, applied two coat of Lime wash finish with one coat of Lime Based primer of approved color and shade to achieve desired finish apply by brush, roller and appropriate tools, as per specification, all completes with the direction of Engineer-in-Charge and Architect. Internal and external surface

Application of High quality Wacker SMK 1311 water base water repellent solvent free silicon coating impregnating on all Internal & external wall surfaces. The dilution of water should be done in ratio of 1:14 (1 Wacker : 14 water). The dilution should be applied in 2 coats, wet on wet application to the surface. The application can be made through brush or spray. The application should be done with prior preparation of surface by cleaning o it form residue of any material, dusting it clean for application.

ORIENT BUILDERS (BID ID -8078)