REPAIR/ REPLACEMENT OF CURTAIN ROD, WOODEN AND PVC DOORS, WINDOWS AND OTHER B/R MAINT WORKS IN MD ACCN IN OLD PROJECT AND NEW PROJECT AREA AT 24ED AF STATION MANAURI

Amount

Taking down chowkhat with shutter without taking off shutter from chowkhat area not exceeding 1.5 Sqm each complete all as specified & directed.

Taking down chowkhat with shutter without taking off shutter from chowkhat area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified & directed.

Taking down chowkhat/frames exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified & directed.

Refixing of shutter not exceeding 1.00 Sqm each in same opening complete all as specified & directed.

Refixing of shutter exceeding 1.00 Sqm but not exceeding 2.00 Sqm each in same opening complete all as specified & directed.

Taking down shutters from Chowkhat area of shutters not exceeding 1 Sqm each complete all as specified & directed.

Taking down shutters from Chowkhat area of shutters exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified & directed.

M & L 2nd Class hard wood Plain solid straight chowkhats and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete as specified & directed by Engineer-in-Charge

S & F 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for scuring glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified. Note :- (i) Quoted rates deem to be included cost of wooden beading to fix glass panes/ wire cloth. (ii) Glass panes/ wire cloth shall be measured and paid for separately and supply only under respective item of this schedule.

Supply & Fixed 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc including teak wood beading on all edges complete all as specified & directed by Engineer-in-Charge. Note :- Thickness of beading for hinge sides shall be 25 mm and on other three edges 6mm thick.

Dismantling wrought iron or mild steel work of any description (i.e wind tie etc) not otherwise provided for etc complete all as specified and directed.

S & F rolled mild steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W(E-250)quality-B, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and as directed.

S&F in repair 1.60mm thick mild steel plain, black sheet in chullah hood, covering to door shutters, ducts etc, cut to size, holes punched including fixing to MS Clamps with necessary bolts and nuts etc complete all as specified and directed by Engr-in-charge.

S&F Mild steel framed work such as window grills or guard bars; with ends of bars shouldered and or riveted or forged in to spikes; framed guard bars or similar works conforming to Grade Fe-290 Gde-E-165 complete all as specified & directed.

S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay complete with glazing bars, dovetailed or welded joints complete as specified & directed by Engineer-in-Charge.

S & F Steel ventilator with top hung shutters including hinge with steel handle and steel peg stay complete as specified & directed by Engineer-in-Charge.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed .

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC (wood finish) ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing of MES SSR Part-II and as directed by Engineer-in-Charge Note :-Frame for fixing shutter, hinges, builder hard ware shall be measured and paid for separately under repective item of this schedule.

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate for fixing of hold fast etc complete as specified & directed.

S&F mild steel cold rolled butt hinges 100 mm medium weight fixed with screws to PVC or wooden frames or with welding in steel frame complete as specified & directed.

S&F extruded aluminium alloy handles anodised 150mm long fabricated type complete all as specified & directed.

Supply & Fixed 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified & directed by Engineer-in-Charge.

S&F sliding door bolts clip type aluminium anodised with hasp & staple type, including bright bolts not less than 12mm dia with and including minimum 6 bolts & nuts, four on bolt plate and two on staple plate; length of bolts 300 mm long complete all as specified & directed by Engineer-in-Charge.

Supply only galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete as specified & directed by Engineer-in-Charge.

Supply & Fixed in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples, beads complete as specified & directed by Engineer-in-Charge.

Supply only sheet glass 3 mm thick ordinary quality in Square or rectangular in shape not exceeding 0.5 Sqm each pane and glazing with oil putty or steel pins complete all as specified & directed by Engineer-in-Charge.

Supply & Fixed in repair sheet glass 3 mm thick ordinary quality in Square or rectangular in shape not exceeding 0.5 Sqm each pane and glazing with oil putty or steel pins complete all as specified & directed by Engineer-in-Charge.

Supply & Fixed floor door stopper aluminium alloy body and toungue anodised with rubber shoes at bottom fixed with screw to body and fixed to door shutters overall length of cover plate 140 mm complete as directed by Engineer-in-Charge.

Supply & Fixed in repair 300mm mild steel, ordinary rat tail rod double action pattern springs including roller and roller plate complete fixed to steel or wooden door frame including necessary welding cutting opening of wall for fixing brackets complete as specified & directed by Engineer-in-Charge.

Supply & Fixed 300mm mild steel, ordinary rat tail rod double action pattern springs including roller and roller plate complete fixed to steel or wooden door frame including necessary welding cutting opening of wall for fixing brackets complete as specified & directed by Engineer-in-Charge.

M & L for preparation of new wooden surface exceeding 10 Cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer complete as specified & directed.

M & L for preparation of new steel surface exceeding 10 Cm width or girth and apply two coats of synthetic enamel paint over one coat of red oxide primer complete as specified & directed.

S&F in repair 19/20 mm dia mild steel chromium plated decorative type curtain rod with fancy type brackets fixed with wooden gutties or plastic plug & screws for holding screen cloths complete as directed by Engineer-in-Charge.

Repair to aluminium window / door / gate including necessary welding, riveting, easing, drilling including taking down and replacement of unserviceable hanging devices such as handles and making them in serviceable condition and refixing in same opening complete all as specified & directed by Engineer-in-Charge.

Repair to steel window / door / gate including necessary welding, riveting, easing, drilling including taking down and replacement of unserviceable hanging devices such as handles and making them in serviceable condition and refixing in same opening complete all as specified & directed by Engineer-in-Charge.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15 mm thick rendering in cement sand mortar 1:6 on fair faces of brick work or concrete surface, surface to be finished even & smooth with out using extra cement complete all as specified & directed.

M & L for preparation of new plasered surface of wall including cornices and apply three coats of white wash complete all as specified & directed.

M & L for anti termite treatement at points of contact of wood work by chemical emulsion 20EC (in oil or kerosene based solution) @ 0.5 litre/holes by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified & directed.

M & L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work including taking down old board complete all as specified and as directed.

S & F for Non asbestos fibre cement building boards 6mm thick fixed / inserted to GI framework with screws of GI frame work of grid size 605 x 605mm, for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section(not exc 2.75 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets etc complete all as specified and directed.

S & F contineous (piano) hinges (30mm wide), mild steel, bright finish or electrogalvanised complete all as specified & directed.

S & F 75mm long Haps & staples, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.

HIMANSHU TRADERS

RK Enterprises

Z N Enterprises