Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.2 LAccepted-AOC AZAD NAGAR RANJHI JABALPUR MP 482010 INDEX NO E 106 JBP | JABALPUR | MADHYA PRADESH | 482010 | L1 | Accepted-AOC Lowest amount quoted | |
| 2 | L2₹33.0 L+₹1.8 L (5.61%)Rejected-Finance | L2 | Rejected-Finance Second lowest amount quoted | |
| 3 | L3₹35.0 L+₹3.7 L (11.9%)Rejected-Finance D 662 WZ 1598 R 1 NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L3 | Rejected-Finance Third lowest amount quoted | |
| 4 | L4₹35.7 L+₹4.5 L (14.3%)Rejected-Finance 403 NARSINGH NAGAR RANJHI JABALPUR MP PIN 482005 | JABALPUR | JABALPUR | MP | 482005 | L4 | Rejected-Finance Highest amount quoted |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
2 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Justin O A, AE (Civ)
Garrison Engineer (East), Near COD Estate, Ranjhi, Jabalpur (MP)-482011
WELCOME MAINTENANCE OF OFFICERS MD ACCN OF COD AND CERTAIN BR REPAIR TO MES COLONY UNDER AGE BR-II OF GE (EAST) JABALPUR
2023_MES_621189_1
8583/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer (East) Jabalpur
D a(i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jabalpur
₹80,000
Yes
24 Jan 2024
4 Oct 2023
4 Nov 2023
4 Oct 2023
2 Nov 2023
20 Oct 2023
4 Oct 2023 - 11 Oct 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.
M&L for non skid coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed. Note - Size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L for non skid coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed. Note - Size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L for non skid coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes. Note - Size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L for light shade Vitrified Ceramic Tiles of design as approved 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed. Note - Size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L for glazed coloured Ceramic Tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick in vertical surface such as dado/skirting/risers to steps etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in CM 1:4 complete all as specified and directed. Note - Size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for machine cut Kota stone slab flooring 20 to 25 mm thick over & including 20 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
M&L for machine cut Kota stone slab 20 to 25 mm thick in riser of steps, skirting, dado & pillar over & including rendering 15 mm thick in CM 1:4, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.
M&L for Hardcore of broken stone or boulders of gauge n.exc 63 mm, deposited, spread & levelled in layers n.exc 15 cm thick, watered & rammed to a true surface complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection etc & finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for providing Glass dividing strips, 3 mm thick and 38 mm width of strip in plinth protection for making panels complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.
M&L for brick work with old size flyash bricks, straight or curved on plan exceeding 6m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for brick work with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and to be finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying three coat of white wash on wall and prepared brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coat of cement based paint over & including one coat of alkali resistant priming paint on wall and prepared brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of oil bound distemper over & including one coat of alkali resistant priming paint on walla and prepared brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of ceiling and apply three coat of white wash on prepared ceiling surface complete all as specified and directed.
M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on newly plastered or unplastered brick work or concrete surfaces complete all as specified and directed.
M&L for applying two coat of oil bound distemper on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on wall and prepared brick work or concrete surfaces complete all as specified and directed.
M&L for complete removal of existing treatment on brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on brick work or concrete surfaces complete all as specified and directed.
M&L for applying two coat of oil bound distemper on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed.
M&L for applying two coat of plastic emulsion paint on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed.
M&L for complete removal of existing treatment on ceiling surfaces & aplying 2 mm thick Wall Care Putty on ceiling surfaces complete all as specified and directed.
M&L for applying two coat of plastic emulsion paint on ceiling surfaces over & including one coat of alkali resistant priming paint on prepared ceiling surfaces complete all as specified and directed.
M&L for preparation of old painted brick work or concrete surfaces & applying one coat of plastic emulsion paint on brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of old painted ceiling surfaces & applying one coat of plastic emulsion paint on ceiling surfaces complete all as specified and directed.
M&L for preparation of old painted brick work or concrete surfaces & applying one coat of white wash on brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of old painted brick work or concrete surfaces & applying one coat of cement based paint on brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of old painted brick work or concrete surfaces & applying one coat of oil bound distemper on brick work or concrete surfaces complete all as specified and directed.
M&L for preparation of old painted ceiling surfaces & applying one coat of white wash on ceiling surfaces complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.
M&L for preparation of old painted Steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old unserviceable water storage tank and removing to store complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old unserviceable water storage tank and removing to store complete all as specified and directed.
S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 210 gms) complete all as specified and directed.
S&F ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 455 gms) complete all as specified and directed.
S&F in repair ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 210 gms) complete all as specified and directed.
S&F in repair ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 455 gms) complete all as specified and directed.
S&F in repair PVC Tank cover for rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 or 1000 litre capacity fixed in position with nuts and bolt complete all as specified and directed.
S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 15 mm bore dia of pipe complete all as specified and directed.
S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore dia of pipe complete all as specified and directed.
Taking up or down 15 mm bore of pipe steel tubing and connections, including cleaning for refixing complete all as specified and directed.
Taking up or down 20 mm bore of pipe steel tubing and connections, including cleaning for refixing complete all as specified and directed.
S&F 15 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls & ceilings or laid in floors complete all as specified and directed.
S&F 20 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls & ceilings or laid in floors complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 15 mm bore of pipe complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 20 mm bore of pipe complete all as specified and directed.
M&L for cleaning and removing all scale and dirt, etc from RCC/PVC tanks exc 250 litre & n.exc 500 litre capacity & from mouths of circulating pipes, etc including washing of water tank with the use of tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
M&L for cleaning and removing all scale and dirt, etc from RCC/PVC tanks exc 500 litre & n.exc 1000 litre capacity & from mouths of circulating pipes, etc including washing of water tank with the use of tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note - Payment for providing grooves shall be made separately.
M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F of framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.
S&F in repair 15 mm bore, fancy type, chromoium plated Bib taps, cast aopper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Taking down bib tap/wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of washer only for 15 mm bore size without replacing spindles complete all as specified and directed.
Taking down bib tap/wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of spindles for 15 mm bore size complete all as specified and directed.
S&F in repair, brass chromium plated Wall Mixer with provision for overhead shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges for 15 mm bore of pipe complete all as specified and directed.
S&F in repair, brass chromium plated Wash Basin Mixer with raised 'J' shaped swinging spout (Table Mounted Model) with 450 mm long braided hoses for 15 mm bore of pipe complete all as specified and directed.
S&F in repair, brass chromium plated Sink Mixer with raised 'J' shaped swinging spout (Wall Mounted Model) with connecting legs & Wall flanges for 15 mm bore of pipe complete all as specified and directed.
S&F in repair, chromium plated Angular Stop Cock with wall flange for 15 mm bore of pipe complete all as specified and directed.
S&F in repair, chromium plated Two-way Bib Cock for 15 mm bore of pipe complete all as specified and directed.
S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair, 15 mm dia of bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed.
S&F in repair, 32 mm bore, brass chromium plated bottle traps for Wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap & fixed complete all as specified and directed.
S&F in repair, 32 mm bore, PVC waste pipe for Wash Basin/Kitchen Sink etc complete all as specified and directed.
S&F in repair, 32 mm bore dia of discharge pipe, waste coupling of PTMT (half or full threaded) (minimum weight 32 mm-45 gms) etc complete all as specified and directed.
S&F in repair, 32 mm dia of bore, Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repair, chromium Plated Grating, 100 mm dia with waste hole fixed on floor trap, nahani trap etc complete all as specified and directed.
S&F in repair, toilet Seat/Commode Jet Spray (Regular type) (1.50 meter) Stainless Steel Grade 304 (Built-in Installation type) for 15 mm dia of bore of pipe complete all as specified and directed.
S&F in repair, Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube & ABS wall hook including making connections & fixed in position complete all as specified and directed.
S&F in repair, Vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling complete all as specified and directed.
S&F in repair, Vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.
S&F in repair, plastic water closet seat cover, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair, Vitreous China squatting pan, ‘Orissa’ Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) etc complete all as specified and directed.
S&F in repair, sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in repair, sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in repair, 1 mm thick, Stainless Steel Plate Rack of overall size 24 inch x 36 inch x 10 inch including fixing with rawal plug and screws complete all as specified and directed.
S&F in repair, 10 litre capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repair, internal fitting for 10 litre capacity PVC valveless, syphonic action type flushing cistern complete all as specified and directed.
S&F in repair, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed.
S&F in repair, 125 mm size, brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.
S&F in repair, PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F in repair, brass chromium plated, tubular towel rail, 20 mm dia, D type, 60 cm long between flanges etc complete all as specified and directed.
S&F in repair, 75 mm diameter of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair, Soap Dish Holder any type fixed to plug with chromoium plated brass screw complete all as specified and directed.
S&F in repair, Corner Glass Shelf with brackets complete all as specified and directed.
S&F in repair, Stainless Steel Double Coat Hook. Complete all as specified and directed complete all as specified and directed.
S&F in repair, Sheet Glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
S&F in repair, Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.
S&F in repair, door Seal with aluminium beading and 50 mm wide rubber seal, fixed to Aluminium/Wooden doors complete all as specified and directed.
Taking down shutters of any description not exc 1 sqm each leaf and refixing in same opening after easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each leaf and refixing in same opening after easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.
S&F in repair, 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F in repair, 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repair, 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F in repair, 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F in repair, 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed complete all as specified and directed.
S&F in repair, 300 mm, mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane. Complete all as specified and directed.
S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F in repair, aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.
S&F in repair, 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
S&F in repair, 75 mm size, hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed with screws complete all as specified and directed.
S&F in repair, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
S&F in repair, Floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm, with hard drawn steel spring, fixed in door complete all as specified and directed.
S&F in repair, single door PVC Cabinet Mirror of size 350 mm x 450 mm with internal shelves complete all as specified and directed.
S&F in repair, stainless steel Towel Ring Round complete all as specified and directed.
S&F in repair, stainless steel Towel Rack 600 mm long with lower hangers complete all as specified and directed.
S&F in repair, Europian WC, Single Piece, Vitreous China with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories, Size: 360 mm x 655 mm x 765 mm, P Trap-180 mm complete all as specified and directed.
Taking down Chowkhats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed.
Taking down Chowkhats or frames exc 1.50 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed.
Taking down Shutters of any description area exc 1 sqm & n.exc 2 sqm each and removing to store complete all as specified and directed.
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and drawing complete all as specified and directed.
S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F 125 mm x 60 mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe-290 (Gde-E-165) complete all as specified and directed.
S&F 35 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 35 mm thick, second class hardwood factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described & applying two coat of synthetic enamel paint (ordinary tint) over & including one coat of red oxide, zinc chrome primer complete all as specified and directed.
S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth & apply two coat of Synthetic enamel paint (ordinary tint) over & including a coat of pink primer complete all as specified and directed.
S&F mild steel flat iron as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for cutting holes in brick walls exc half brick but n.exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.
S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed complete all as specified and directed.
S&F in repair, 18/19 mm thick, high density PVC/WPC solid fibre board with prelaminated PVC sheet as kitchen cupboard and frame including taking down the old cupboard shutters and removing to store complete all as specified and directed.
S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40 mm complete all as specified and directed.
S&F magnetic catcher with nut and screw of mild steel bright finish complete all as specified and directed.
S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
S&F 5 mm thick Figured glass, pin head type for UPVC white colour fixed or lovoured window/ventilator in squares n.exc 0.5 sqm in each pane complete all as specified and directed.
Schedule of credit amount of Rs. 1,01,055.00 to be deducted during AOC.
ISHWAR CONSTRUCTION COMPANY
SHIVA ENTERPRISES
LAL SINGH & SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .