REPAIR / REPLACEMENT AND PAINTING TO STEEL FURNITURE, REPAIR REPLACEMENT AND MODIFICATION OF CHARPOY GI PIPE COTTON NEWAR TO CHARPOY WITH PLY TOP AND REPAIR / REPLACEMENT /PAINTING/POLISHING OF BRANDED STEEL FURNITURE / WOODEN FURNITURE AT BSO YARD U

Amount

Almirah Large Steel : FD-67(M),FD-350/351/1031/ 1033

S&F in repairs legs and providing new by welding made out of 1mm thick MS Sheet duly welded including preparation of surface into required shape for almirah large steel, rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs locking device including replacement of brass 6 lever locks Make-Godrej iron body with duplicate keys chromium plated to , rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs Stainless steel handle of size 150 mm grip length with both sides screwed to Almirah large steel , rest all as shown on drg and as directed by Engr-in-Charge.

Repairs to door as specified including replacement of hinges all as shown on drawing and as directed by Engr-in-charge

S&F in repairs shelves with MS sheet CRC 1mm thick bent to shape including welding to the almirahs, rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repair MS Clamp for proper fixing & readjustment of shelves as directed by Engr-in-charge.

Repair to existing shelf including welding as directed by Engr -in Charge

M & L for welding of broken joints of Almirah with shelves continuously 50mm to 75mm long for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint with spray Gun and applying one coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge.

Almirah Medium / Small Steel : FD-243 FD-1032, FD-1034

S&F in repairs legs and providing new by welding made out of 18 gauge MS Sheet into required shape for almirah medium/small steel , rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs locking device including replacement of brass 6 lever locks Make:-Godrej iron body with duplicate keys chromium plated to , rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs Stainless steel handle of size 150 mm grip length with both sides screwed , rest all as shown on drg and as directed by Engr-in-Charge.

Repairs to door as specified including replacement of hinges all as shown on drawing and as directed by Engr-in-charge

S&F in repairs shelves for with MS sheet CRC 1mm thick bent to shape including welding to the almirahs, rest all as shown on drg and as directed by Engr-in-Charge.

Repair to existing shelf including welding, rest all as shown on drg and as directed by Engr-in-Charge.

M & L for welding of broken joints of Almirah continuously 50mm to 75mm long for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint with spray gun over a coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge.

Locker Bed Side Steel FD-1029,

S&F in repair to leg made out of 18 guage MS Sheet complete including preparation of surface & applying two coats of synthetic enamel paint with spray gun and one coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repair to MS butt Hinges 75mm long all as shown on Drg and as directed by Engr-in-charge

S&F in repair to Stainless steel Handle 100mm long all as shown on Drg and as directed by Engr-in-charge

S&F in repair to Chromium plated Hasp & Staple of size 75mmx40mmx3mm all as shown on Drg and as directed by Engr-in-charge

M & L for welding of broken joints of Locker Steel including preparation of surface & applying two coats of smoke gray/Olive green synthetic enamel paint with spray gun over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table Office Officer Steel : FD-84/ 1003

S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship for including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs top with 18mm thick prelaminated particle board exterior grade conforming to IS-12823 of approved make one side teak facing and balancing white on other side all the four edges provided with 4mm thick first class teak wood beading, rest all as shown on drg and as directed by Engr-in-Charge.

S & F MS Lock (6 liver brass levers) Make:-Godrej with duplicate keys for drawers, rest all as shown on drg and as directed by Engr-in-Charge.

M & for repair including welding and replacement of heavy duty spring with new as per existing locking device to make functional for smoothly play of drawers in its original position, rest all as shown on drg and as directed by Engr-in-Charge.

S &F in repair to Leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

Table Office Clerk Steel : FD-84 / 381 FD-1004

S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship including preparation of surface & applying two coats of synthetic enamel paint over one coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs top with 18mm thick prelaminated particle board exterior grade conforming to IS-12823 of approved make one side teak facing and balancing white on other side all the four edges provided with 4mm thick first class teak wood beading, rest all as shown on drg and as directed by Engr-in-Charge.

S & F MS Lock (6 liver brass levers) Make:-Godrej with duplicate keys for drawers, as per approved sample & as directed by Engr-in-charge.

M & L for repair including welding and replacement of heavy duty spring with new as per existing locking device to make functional for smoothly play of drawers in its original position, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repair to leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F to Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

Table Dining ORs : FD-165 (M)

M&L in repair to leg made out of 25mm square pipe having wall thickness 1.6mm complete including preparation of surface & applying two coats of black/olive green synthetic enamel paint with spray gun over a one coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

M&L for welding of broken joints including preparation of surface and applying two coat of black/olive green synthetic enamel paint with spray gun over a one coat of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repair Top made out of 19mm thick Marine plywood BWP confirmed to IS-710 Make:-Greenply/Kitply of approved make complete with 22 gauge aluminium sheet of top, rest all as shown on drg and as directed by Engr-in-Charge.

S&F Hard rubber toes of superior quality as specified and as directed by Engr-in-charge.

TABLE COOK HOUSE WITH MARBLE TOP FD-298

M&L for removing unserviceable broken marble top and S & F new marble top of size 1530mm X 900mm X 25mm thick as existing in Table cook house with marble top complete all as specified and as directed by the Engr-in-Charge.

S &F in repair to Leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F to Hard Rubber/PVC toe of superior quality in shape as Sqaure 25mm all as approved & as directed by Engr-in-charge.

TABLE 900X600x760MM STEEL WITH DRAWER FD-1008

S &F repairs top with 18 mm thick prelaminated particle board of exterior grade conforming to IS -12823 of appproved make one side teak facing and balancing white on other side al the four edges provided with 4mm thick first class teak wood beading,rest all as shown on drg including polishing and complete all as specifiedand as directed by Engr-in-charge. Make (Nova Pan / Eco- Board) .

S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship including preparation of surface & applying two coats of synthetic enamel paint over one coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S & F MS Lock (6 liver brass levers) Make:-Godrej with duplicate keys for drawers,and Fixinged with welding/ screws as applicable as per standard drawings as per approved sample & as directed by Engr-in-charge.

S &F in repair to Leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F to Hard Rubber/PVC toe of superior quality in shape as Sqaure 25mm all as approved & as directed by Engr-in-charge.

TABLE 900X600x760MM STEEL W/O DRAWER FD-1007

S &F repairs top with 18 mm thick prelaminated particle board of exterior grade conforming to IS -12823 of appproved make one side teak facing and balancing white on other side al the four edges provided with 4mm thick first class teak wood beading,rest all as shown on drg including polishing and complete all as specifiedand as directed by Engr-in-charge. Make (Nova Pan / Eco- Board) .

S &F in repair to Leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F to Hard Rubber/PVC toe of superior quality in shape as Sqaure 25mm all as approved & as directed by Engr-in-charge.

CHAIR WRITING STEEL WITH ARM & L for taking down the following old unserviceable damaged parts of Chair writing Steel with arms and supply & fixing new parts to make functional and as directed by Engineer-in-charge:- TP

S & F repair of seat frame with 12mm ply and cushion with leather cloth (Rexne cloth) size-480mmx480mmx750mm, including painting the the frame back side with two coats black synthetic enamel paint with spray gun over a coat of wood primer, complete and as direceted by Engineer -in-Charge.

S & F repair of back seat frame with 12mm ply and cushion with leather cloth (Rexne cloth) size-430mmx210mmx50mm including painting the the frameback side with two coats black synthetic enamel paint with spray gun over a coat of wood primer, complete and as direceted by Engineer -in-Charge.

S & F in repair of handle (wooden) size-430mmx65mmx25mm, including painting the the handle with two coats brown synthetic enamel paint with spray gun over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge.

S&F in repair of front Leg Made out of square pipe size-660mmx20mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer complete, and as directed by Engr-in-Charge.

S& F in repair of Rear Leg Made out of square pipe size-890mmx20mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer complete, and as directed by Engr-in-Charge.

S &F in repair of side rail Made out of square pipe size-440mmx20mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer complete, and as directed by Engr-in-Charge.

S &F in repair of Stiffener Made out of square pipe size-460mmx20mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint with spray gun over one coats of red oxide primer complete, and as directed by Engr-in-Charge.

M & L for welding of broken joints continuously for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint with spray gun over a one coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge.

S&F to Hard Rubber/PVC toe of superior quality in shape as Sqaure 20mm all as approved & as directed by Engr-in-charge.

10.Chair ornate supreme M & L for taking down the following old unserviceable damaged parts and supply & fixing new parts to make functional and as directed by Engineer-in-charge:- TP

S&F in repair of seat with 4 Nos nuts & bolts as per existing. The quality & shade/colour of the cover of seat should match with the existing shade/colour as approved & directed by Engr-in-Charge

S & F in repair of back esat with 4 Nos nut & bolt as per existing. The quality & shade/colour as approved & directed by Engr-in-Charge

Chair revolving high back/low back/executive/computer with arm/without arm FD-75 & CWE/FD-01/2000

S & F in repairs of maintenance free Gas lift for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs of Padestal assy. Injection moulded in black 30% glass filled nylon , 50mm MS castor pin is of press fitted to each prong for holding the castor,for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs of twin wheel castors for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs of PU seat & back duly upholstered with best quality Acrylic/polyester febric complete for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs of handles of chair revolving made of black integeral skin polyurethane reinforced with MS insert scratch proof complete for all type of chairs revolving with arm rest all as shown on drg and as directed by Engr-in-Charge.

Charpoy GI pipe Nylon Newar FD-220 or Similar

S & F in repairs 32mm dia ISI medium grade of approved make, long rail for GI Charpoy pipe including removing unserviceable long rail, rest all as shown on drg and as directed by Engr-in-Charge.

Making short rail for GI Charpoy obtained from item No 8.01 here-in-before cut in to lenth and threading including removing of existing unserviceable short rails all as specified and directed.

Making leg for GI charpoy from short rail obtained from item No. 8.02 here-in-before end threading other end provided with MNF clamp suitable for 19mm dia conduit pipe 3mm base plale welded at bottom and fixed in repairs as required as per drg.

S&F in repairs MS Check nuts, rest all as shown on drg and as directed by Engr-in-Charge. MS Check nut as per drg.

S&F in repairs GI Elbow 32 mm dia three way medium grade, rest all as shown on drg and as directed by Engr-in-Charge.

M& L Removing existing unserviceable / old tape newar nylon from charpoy GI/IP, all are of MES pattern and cleaning the frames and provision of modification of charpoy GI Pipe cotton Newar to charpoy ply top and apply and fixing new 12mm thick commercial plywood size 1950x900mmm make kit ply/National/Greenply with ISI Mark all as per drawing and as directed by Engr-in-charge.

Chair Verandah FD-229 or similar

Removal of unserviceable cane from Chair , scraping existing paint from frame with sand paper and M&L painting with two coats of synthetic enamel paint colour in white with spray gun and M&L for recaning with white plastic cane 4mm wide, including replacing of hard rubber toes etc complete all as specified and as directed by Engr-in-Charge

Charpoy hard top MAP FD/E6/Map/04

M&L removing of existing unserviceable / broken plywood from charpoy IP hard top and supply and fixing new 12mm thick commercial plywood of size 1950x900mm make kit ply /National/Greenply with ISI Mark

S&F to Hard Rubber/PVC toe of superior quality in shape as Sqaure 32mm all as approved & as directed by Engr-in-charge.

Chair CB Steel with Arm/Without Arm M & L for taking down the following old unserviceable damaged parts of Chair CB Steel and supply & fixing new parts to make functional all as shown on drawing and as directed by Engineer-in-charge:- FD-75(M)

S & F repair of seat frame (wooden) of Chair CB Steel with arms duly caned, including painting the the frame with two coats black synthetic enamel paint with spray gun over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge.

S & F in repairs of back frame (wooden) of Chair CB Steel with arms duly caned, including painting the the frame with two coats black synthetic enamel paint with spray gun over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge.

S&F in repair of seat frame (wooden) of Chair CB Steel with out arms duly caned, including painting the the frame with two coats black synthetic enamel paint with spray gun coats over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge.

S& F in repair of back frame (wooden) of Chair CB Steel with out arms duly caned, including painting the the frame with two coat black synthetic enamel paint with spray gun over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge.

S & F in repair of handle (wooden) of Chair CB Steel with arms , including painting the the handle with two coats black synthetic enamel paint with spray gun over a coat of wood primer, complete all as per drawing and as direceted by Engineer -in-Charge.

M & L for welding of broken joints continuously for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint with spray gun over a one coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge.

Computer Table 2.5' x 1.5' (TP)

S& F in repairs Table top as per existing size with 19mm thick pre-laminated particle bd for computer top complete all as specified and directed by Engr -in -Charge

Removing the unserviceable / broken top ( Channel 12" in drawer) and providing new channel including fixing it complete all as specified and directed by Engr-in-charge

Book case steel FD-1028

M & L for removing unserviceable handle from Book case steel and supply and fixing new handle 100mm chromium plated and fixing with welding/revetting all as specified and as directed by Engr-in Charge.

M & L for removing unserviceable locks from Book case steel and supply and fixing new locking device with duplicate key of approved quality of existing size fixed with screw/welding to shutter of almirah large steel and all as specified and directed by Engr-in Charge.

M & L for removing the existing dentd shelves and shutters from Book case steel and bringing the item to the original shapes and refixing shelves nd shutters with necessary clits/nuts and bolts including one coat of synthetic enamelled paint of approved Tint over a coat of red oxide primer all as specified and directed by Engr-in Charge.

M & L for removing the broken glass from shutter of Book case steel and supply and fixing new glass of 3 mm thick 200 mmx 100mm to shutter all as specified and directed by Engr-in Charge.

Bed Flower Steel (TP)

S&F in repair 12 mm thick BWR plywood 7 ply garde A of size 930 x 1830 mm ISI Marked as confirmed to IS-303 in single piece without any joint to the bed frame with suitable stainless steel screws with cup washer including removal of damaged ply wood all as directed by Engineer-in-charge. Make:- Green ply/Century ply/kitply

S&F in repairs to stainless steel long rail as per existing size 1830mm, 38mm & 1.5 mm thick stainless steel hollow pipe of grade 304 with ISI mark will be used of Bed steel including removal of damaged long rail all as specified and directed by Engineer-in-charge. (Each long rail will be measured as single unit)

S&F in repair to stainless steel short rail as per existing size 930mm, 38mm dia & 1.5 mm thick stainless steel hollow pipe of grade 304 with ISI mark will be used, shall be made from existing long rail all as specified or as directed by Engineer-in-Charge, (Each short rail will be measured as single unit)

S&F in repairs to head board and foot board shall be 18mm thick pre-laminated particle board melamine face both side screwed to SS strip ARC welded to 1.5 mm thick SS pipe frame, 18mm x 18mm square SS pipe 1.5mm thick to be provided at teak board along with 25 x 65mm SS strip ARC weded to SS pipe as shown head board and foot board consisting complete including removal of damaged head board all as specified or as directed by Engineer-in-charge.

Bed Iron Steel Hospital (TP)

S&F 1.5 mm thick CRC sheet garde A of size 930 x 1830 mm ISI Marked as confirmed in single piece without any joint to the bed frame with suitable screws and ARC welded including removal of damaged CRC sheet all as directed by Engineer-in-charge. Make:- TATA/Jindal

S&F in repairs to GI pipe long rail as per existing size 1830mm, 32mm & 1.5 mm thick GI pipe ISI marked will be used of Bed steel including removal of damaged long rail all as specified and directed by Engineer-in-charge. (Each long rail will be measured as single unit)

S&F in repair to GI pipe short rail as per existing size 930mm, 32mm dia & 1.5 mm thick GI pipe with ISI mark will be used, shall be made from existing long rail all as specified or as directed by Engineer-in-Charge, (Each short rail will be measured as single unit)

Chair CBA padded with arms (TP) M & L for taking down the following old unserviceable damaged parts of Chair CBA padded with Arms Steel and supply & fixing new parts to make functional all as directed by Engineer-in-charge.

Replacement of seat frame of Chair CBA padded with arms duly made of 12mm ply with foam cushion and rexine seat cover with 04 Nos nuts and bolts with washer including painting the frame with black synthetic enamel paint of two coats complete all as direceted by Engineer -in-Charge.

Replacement of back seat frame of Chair CBA padded with arms duly made of 12mm ply with foam cushion and rexine seat cover with 04 Nos nuts and bolts with washer including painting the frame with black synthetic enamel paint of two coats complete all as direceted by Engineer -in-Charge.

Replacement handle of Chair CBA Steel padded with arms, including foam and rexine cover with 02 Nos nuts and bolts with washer complete all as direceted by Engineer -in-Charge.

M & L for welding of broken joints continuously for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint over a coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge.

Sofa Chair Special (TP)

Removing of existing unserviceable front legs from sofa and providing new legs of 1st class teak wood of leg size 70mm x 35mm x 50mm complete all as directed by Engr-in-Charge.

Removing of existing unserviceable rear legs from sofa and providing new legs of 1st class teak wood of leg size 70mm x 35mm x 50mm complete all as directed by Engr-in-Charge.

Removing existing unserviceable arm rest from sofa chair special and providing new first class teak wood arm rest of size 35mm x 70mm x 725mm with cushion and rexine cover all as directed by Engineer-in-Charge.

Removing existing unserviceable side rail from sofa chair special and providing new first class teak wood side rail of size 35mm x 100mm x 725mm all as directed by Engineer-in-Charge.

Removing existing unserviceable front rail from sofa chair special and providing new first class teak wood side rail of size 35mm x 100mm x 530mm all as directed by Engineer-in-Charge.

Replacement of existing U/S complete foam cushion combined back and seat covered with rexine cover of Cofee coloure all as directed by Engineer-in-Charge.

Peg table with decorative glass Top (TP)

Replacement of existing unserviceable peg table with decorative glass top of size 500mm x 350mm x 12mm all as directed by Engineer-in-charge. Make : Sant Govind/Modi Guard

S&F in repairs to unserviceable damaged long rail front/back of size 425mm x 25mm x 50mm from new long rail made out of first class hard teak wood complete all as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side rail of size 300mm x 25mm x 50mm from new side rail made out of first class hard teak wood complete all as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged legs of size 375mm x 50mm x 50mm from new legs made out of first class hard teak wood complete all as directed by Engr-in-Charge.

Chair writing visitor wall nut wood fully caved superior specification Decorative (TP)

M & L for taking down the old unserviceable seat of Chair writing visitor superior specification decorative and S & F seat with 4 Nos nuts & bolts as per existing. The quality & shade/colour of the cover of seat should match with the existing shade/colour as approved & directed by Engr-in-Charge.

M & L for taking down the old unserviceable back of Chair writing visitor superior specification decorative and S & F new back with 4 Nos nut & bolt as per existing. The quality & shade/colour as approved & directed by Engr-in-Charge.

Table centre with decorative glass top (TP)

Replacement of existing unserviceable table centre with decorative glass top of size 1050mm x 550mm x 12mm thick complete all as directed by Engineer-in-charge. Make : Sant Govind/Modi Guard

Replacement of existing unserviceable table centre with decorative glass base/shelf top of size 900mm x 450mm x 12mm thick complete all as directed by Engineer-in-charge. Make : Sant Govind/Modi Guard

S&F in repairs to unserviceable damaged legs of size 400mm x 38mm & 1.5mm thick stainless steel pipe of grade 304 with ISI mark will be used of table centre with decorative glass top including removal of damaged legs all as specified and directed by Engineer-in-charge. (Each leg will be measured as single unit)

Table wooden 1200mm x 1200mm with decorative glass top (TP)

S&F Table top of size 1200mm x 1200mm with 12mm thick decorative glass top of approved make all as directed by Engineer-in-charge. Make Sant Govind & Modi Guard.

S&F in repairs to unserviceable damaged front/back long rail of size 1100mm x 75mm x 40mm made out of first class hard wood (teak) all as specified and directed by Engineer-in-charge. (Each long rail will be measured as single unit)

S&F in repairs to unserviceable damaged side rail of size 1100mm x 75mm x 40mm made out of first class hard wood (teak) all as specified and directed by Engineer-in-charge. (Each side rail will be measured as single unit)

S&F in repairs to unserviceable damaged leg of size 760mm x 75mm x 40mm made out of first class hard wood (teak) all as specified and directed by Engineer-in-charge. (Each leg will be measured as single unit)

Sofa set five seater executive type (TP)

Replacement of existing unserviceable back/front seat foam covered with rexine seat cover of coffee coloure all as specified and directed by Engineer-in-Charge.

Removing the existing unserviceable front leg from sofa and providing new first class teak wood of leg size 70mm x 35mm x 530mm complete, all as directed by Engr-in-Charge.

Removing the existing unserviceable rear leg from sofa and providing new first class teak wood of rear leg size 70mm x 35mm x 530mm complete, all as directed by Engr-in-Charge.

Removing the existing unserviceable arms rest from sofa and providing new first class teak wood including foam covered with rexine cover of cofee coloure of size 35mm x 70mm x 725mm complete all as directed by Engr-in-Charge.

Charpoy double bunk bed stainless steel pipe with prelaminated board with foam cushioning top (TP)

Removing of existing unserviceable top of charpoy double bunk bed and providing new top of size 12mm thick prelaminated particle board with teak finish ply board 1800mm long and 900mm wide shall be fixed with 75mm thick high density foam cushion leather all as directed by Engineer-in-Charge.

S&F in repairs to unserviceable damaged legs of charpoy double bunk bed of size 1830mm x 38mm dia & 1.5 mm thick wide 980mm 'U' type stainless steel of grade 304 with ISI Marked hollow pipe all as directed by Engr-in-Charge. (Each leg will be measured as single unit)

S&F in repairs to unserviceable damaged long rails of charpoy double bunk bed of size 1830mm x 38mm dia & 1.5 mm thick wide stainless steel of grade 304 with ISI Marked hollow pipe welded with gas welding all as directed by Engr-in-Charge. (Each long rail will be measured as single unit)

Removing the of existing worn out painting with acid from in side & outside including preparation of surface frame complete of the following steel/wooden and Branded furniture and M&L for applying two coats of 1st quality synthetic enamel paint smoke grey/Olive green/Whitewith spray gun over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge.

Almirah large steel 1/2 H 1/2 Self FD-114(M), FD-1033 & MAP type

Almirah steel large with shelves FD-351

Almirah steel medium with shelves FD-350

Chair CB steel with arms FD-75 (M)

Chair CB Steel without arms FD-75 (M)

Book Case Steel FD-1028

Locker Steel FD-257, FD-1029

Rack steel adjustable three tiers (711 X 655 X 254 mm) FD-106 (M)

Table Office Officer steel FD-84 (M)

Table Office clerk steel FD-84 (M)

Table 900 x600x760MM Steel with out Drawer FD-1008

Table 900 x600x760MM Steel with Drawer FD-1008

Table dining OR's FD-165 (M)

Computer table (TP)

Bed Iron Steel Hospital (TP)

Chair CBA padded with arms (TP)

Peg table with decorative glass Top (TP)

Table centre with decorative glass top (TP)

Table wooden 1200mm x 1200mm with decorative glass top (TP)

Bed Flower Steel (TP)

S&F in repair 12 mm thick BWR plywood 7 ply garde A of size 930mm x 1830 mm ISI Marked as confirmed to IS-303 in single piece without any joint to the bed frame with suitable stainless steel screws with cup washer including removal of damaged ply wood all as directed by Engineer-in-charge. Make:- Green ply/Century ply/kitply

S&F in repairs to stainless steel long rail as per existing size 1830mm, x38mm & 1.5 mm thick stainless steel hollow pipe of grade 304 with ISI mark will be used of Bed steel including removal of damaged long rail all as specified and directed by Engineer-in-charge. (Each long rail will be measured as single unit)

S&F in repair to stainless steel short rail as per existing size 930mm, 38mm dia & 1.5 mm thick stainless steel hollow pipe of grade 304 with ISI mark will be used, shall be made from existing long rail all as specified or as directed by Engineer-in-Charge, (Each short rail will be measured as single unit)

S&F in repairs to head board and foot board shall be 18mm thick pre-laminated particle board melamine face both side screwed to SS strip ARC welded to 1.5 mm thick SS pipe frame, 18mm x 18mm square SS pipe 1.5mm thick to be provided at teak board along with 25 x 65mm SS strip ARC weded to SS pipe as shown head board and foot board consisting complete including removal of damaged head board all as specified or as directed by Engineer-in-charge.

Bed Iron Steel Hospital (TP)

S&F 1.5 mm thick CRC sheet garde A of size 930 x 1830 mm ISI Marked as confirmed in single piece without any joint to the bed frame with suitable screws and ARC welded including removal of damaged CRC sheet all as directed by Engineer-in-charge. Make:- TATA/Jindal

S&F in repairs to GI pipe long rail as per existing size 1830mm, 32mm & 1.5 mm thick GI pipe ISI marked will be used of Bed steel including removal of damaged long rail all as specified and directed by Engineer-in-charge. (Each long rail will be measured as single unit)

S&F in repair to GI pipe short rail as per existing size 930mm, 32mm dia & 1.5 mm thick GI pipe with ISI mark will be used, shall be made from existing long rail all as specified or as directed by Engineer-in-Charge, (Each short rail will be measured as single unit)

Chair writing with arms (TP) M & L for taking down the following old unserviceable damaged parts of Chair writing with Arms Steel and supply & fixing new parts to make functional all as directed by Engineer-in-charge.

Replacement of seat frame of Chair writing with arms duly made of 12mm ply with foam cushion and rexine seat cover with 04 Nos nuts and bolts with washer including painting the frame with black synthetic enamel paint of two coats complete all as direceted by Engineer -in-Charge.

Replacement of back seat frame of Chair writnig with arms duly made of 12mm ply with foam cushion and rexine seat cover with 04 Nos nuts and bolts with washer complete all as direceted by Engineer -in-Charge.

Replacement handle wooden of Chair witing with arms, teak wood with 02 Nos nuts and bolts with washer including the polish complete all as direceted by Engineer -in-Charge.

M & L for welding of broken joints continuously for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint over a coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge.

Chair CBA padded with arms (TP) M & L for taking down the following old unserviceable damaged parts of Chair CBA padded with Arms Steel and supply & fixing new parts to make functional all as directed by Engineer-in-charge.

Replacement of seat frame of Chair CBA padded with arms duly made of 12mm ply with foam cushion and rexine seat cover with 04 Nos nuts and bolts with washer including painting the frame with black synthetic enamel paint of two coats complete all as direceted by Engineer -in-Charge.

Replacement of back seat frame of Chair CBA padded with arms duly made of 12mm ply with foam cushion and rexine seat cover with 04 Nos nuts and bolts with washer including painting the frame with black synthetic enamel paint of two coats complete all as direceted by Engineer -in-Charge.

Replacement handle of Chair CBA Steel padded with arms, including foam and rexine cover with 02 Nos nuts and bolts with washer complete all as direceted by Engineer -in-Charge.

M & L for welding of broken joints continuously for smooth finish through gas welding including preparation of surface and applying two coat of Synthetic enamal paint over a coat of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-charge.

Sofa Chair Special (TP)

Removing of existing unserviceable front legs from sofa and providing new legs of 1st class teak wood of leg size 70mm x 35mm x 50mm complete all as directed by Engr-in-Charge.

Removing of existing unserviceable rear legs from sofa and providing new legs of 1st class teak wood of leg size 70mm x 35mm x 50mm complete all as directed by Engr-in-Charge.

Removing existing unserviceable arm rest from sofa chair special and providing new first class teak wood arm rest of size 35mm x 70mm x 725mm with cushion and rexine cover all as directed by Engineer-in-Charge.

Removing existing unserviceable side rail from sofa chair special and providing new first class teak wood side rail of size 35mm x 100mm x 725mm all as directed by Engineer-in-Charge.

Removing existing unserviceable front rail from sofa chair special and providing new first class teak wood side rail of size 35mm x 100mm x 530mm all as directed by Engineer-in-Charge.

Replacement of existing U/S complete foam cushion combined back and front seat covered with rexine cover of Cofee coloure all as directed by Engineer-in-Charge.

Table 5' x 2'-10" (TP)

S & Fixed in repairs table top of size 1500mm x 600mm with 24mm thick particle board with sunmica confirming to ISI marked of approved make, all as directed by Engineer-in-charge.

Removing existing unserviceable front rail from table of size 1500mm x 75mm x 40mm and providing new first class teak wood all as directed by Engineer-in-Charge.

Peg table with decorative glass Top (TP)

Replacement of existing unserviceable peg table with decorative glass top of size 500mm x 350mm x 12mm all as directed by Engineer-in-charge. Make : Sant Govind/Modi Guard

S&F in repairs to unserviceable damaged long rail front/back of size 425mm x 25mm x 50mm from new long rail made out of first class hard teak wood complete all as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side rail short of size 300mm x 25mm x 50mm from new side rail made out of first class hard teak wood complete all as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged legs of size 375mm x 50mm x 50mm from new legs made out of first class hard teak wood complete all as directed by Engr-in-Charge.

Chair writing visitor wall nut wood fully caved superior specification Decorative (TP)

M & L for taking down the old unserviceable seat of Chair writing visitor superior specification decorative and S & F seat with 4 Nos nuts & bolts as per existing. The quality & shade/colour of the cover of seat should match with the existing shade/colour as approved & directed by Engr-in-Charge.

M & L for taking down the old unserviceable back of Chair writing visitor superior specification decorative and S & F new back with 4 Nos nut & bolt as per existing. The quality & shade/colour as approved & directed by Engr-in-Charge.

Table centre with decorative glass top (TP)

Replacement of existing unserviceable table centre with decorative glass top of size 1050mm x 550mm x 12mm thick complete all as directed by Engineer-in-charge. Make : Sant Govind/Modi Guard

Replacement of existing unserviceable table centre with decorative glass base/shelf top of size 900mm x 450mm x 12mm thick complete all as directed by Engineer-in-charge. Make : Sant Govind/Modi Guard

S&F in repairs to unserviceable damaged legs of size 400mm x 38mm & 1.5mm thick stainless steel pipe of grade 304 with ISI mark will be used of table centre with decorative glass top including removal of damaged legs all as specified and directed by Engineer-in-charge. (Each leg will be measured as single unit)

Table wooden 1200mm x 1200mm with decorative glass top (TP)

S&F Table top of size 1200mm x 1200mm with 12mm thick decorative glass top of approved make all as directed by Engineer-in-charge. Make Sant Govind & Modi Guard.

S&F in repairs to unserviceable damaged front/back long rail of size 1100mm x 75mm x 40mm made out of first class hard wood (teak) all as specified and directed by Engineer-in-charge. (Each long rail will be measured as single unit)

S&F in repairs to unserviceable damaged side rail of size 1100mm x 75mm x 40mm made out of first class hard wood (teak) all as specified and directed by Engineer-in-charge. (Each side rail will be measured as single unit)

S&F in repairs to unserviceable damaged leg of size 760mm x 75mm x 40mm made out of first class hard wood (teak) all as specified and directed by Engineer-in-charge. (Each leg will be measured as single unit)

Sofa set five seater executive type (TP)

Replacement of existing unserviceable back/front seat foam covered with rexine seat cover of coffee coloure all as specified and directed by Engineer-in-Charge.

Removing the existing unserviceable front leg from sofa and providing new first class teak wood of leg size 70mm x 35mm x 530mm complete, all as directed by Engr-in-Charge.

Removing the existing unserviceable rear leg from sofa and providing new first class teak wood of rear leg size 70mm x 35mm x 530mm complete, all as directed by Engr-in-Charge.

Removing the existing unserviceable arms rest from sofa and providing new first class teak wood including foam covered with rexine cover of cofee coloure of size 35mm x 70mm x 725mm complete all as directed by Engr-in-Charge.

Chair computer revolving with arms (TP)

S & F in repairs of maintenance free Gas lift for all type of chairs computer revolving with arms all as directed by Engr-in-Charge.

S & F in repairs of Padestal assy. Injection moulded in black 30% glass filled nylon , 50mm MS castor pin is of press fitted to each prong for holding the castor,for all type of chairs computer revolving all as directed by Engr-in-Charge.

S & F in repairs of twin wheel castors for chairs computer revolving with arms as directed by Engr-in-Charge.

S & F in repairs of PU seat & back duly upholstered with best quality Acrylic/polyester febric complete for chair computer revolving with arms all as directed by Engr-in-Charge.

S & F in repairs of chair computer revolving arms rest made of black integeral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistance and both hand rest section to have slope all as directed by Engr-in-Charge.

Charpoy double bunk bed stainless steel pipe with prelaminated board with foam cushioning top (TP)

Removing of existing unserviceable top of charpoy double bunk bed and providing new top of size 12mm thick prelaminated particle board with teak finish ply board 1800mm long and 900mm wide shall be fixed with 75mm thick high density foam cishioning leather all as directed by Engineer-in-Charge.

S&F in repairs to unserviceable damaged legs of charpoy double bunk bed of size 1830mm x 38mm dia & 1.5 mm thick wide 980mm 'U' type stainless steel of grade 304 with ISI Marked hollow pipe all as directed by Engr-in-Charge. (Each leg will be measured as single unit)

S&F in repairs to unserviceable damaged long rails of charpoy double bunk bed of size 1830mm x 38mm dia & 1.5 mm thick wide stainless steel of grade 304 with ISI Marked hollow pipe welded with gas welding all as directed by Engr-in-Charge. (Each long rail will be measured as single unit)

Removal of existing worn out painting with acid from in side and outside including preparation of surface frame complete of the following steel/wooden furniture and M&L for applying two coats of 1st quality synthetic enamel paint white & black and two coat of french polish old wood surface by scraping and filling bore holes with putty and finally rubbing with sand paper/abbrasive cloth thoroughly for smooth and cleaning surface steel/wooden furniture finishing all as directed by Engineer-in-charge. for the following furniture articles:-

Bed Iron Steel Hospital (TP)

Chair CBA padded with arms (TP)

Table 5' x 2'-10" (TP)

Peg table with decorative glass Top (TP)

Table centre with decorative glass top (TP)

Table wooden 1200mm x 1200mm with decorative glass top (TP)

Table computer 2.5 fit x 1.5 fit (TP)

Writing shelf (TP)

Chair Revolving Godrej Pattern (TP)

Channel track (TP)

Form without back steel (TP)

Table Centre glass top 4'x2' (TP)

Low back Excutive chair (TP)

Almirah wooden fancy type with decorative door shutter (TP)

Chair Revolving (TP)

Rack Towel steel (TP)

M/S GLOBAL ENGINEERS

M/S TRADE LINK

M/S WELDED IRON FABRICATROS