8520E8SPECIAL REPAIRS TO BOUNDARY WALL PROVN OF PCC PATH AND CERTAIN REVENUE WORKS IN AFTC AREA UNDER GE M AF JALAHALLI BANGALORE

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Demolition of Concrete of any description and in any position not otherwise specifically provided for and removal of demolished salvage to outside of MD land

Demolition of brick work / stone masonry built in cement mortar of any description and removal of demolished salvage to outside of MD land

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting out for foundation in hard/dense soil.

Material and labour for Plain cement concrete 1:4:8 type D2 (40mm graded agg) as in foundation filling mass and all as specified

Material and labour walling of random rubble, uncoursed well bonded ,bedded and solidly hearted built in CM 1:4 all aspecified but except stone.

Material and labour Keyed pointing to random or polygonal rubble, uncouresed or brought upto course in CM 1:4 all as specified.

Material and labour Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for rough finished surfaces of concrete.

Material and labour TMT bars 10mm dia and over, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

All as per item No 9 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

All as per item No 9 but 6 to 8mm dia

Material and labour Reinforced cement concrete M-25 (design mix) using 20mm graded stone aggregate for foundation, rafts, footings, foundation beams, plinth beams, bases for columns etc. basement slabs, and mass concrete all as specified.

Material and labour for steel Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete.

Material and labour for steel Form work to sides of pillars, posts, struts, piers, columns and stanchions for fair finished flat surfaces of concrete.

Material and labour Reinforced cement concrete M-25 (design mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts all as specified.

Material and labour Use and waste Form work to sides and soffits of lintels and beams for fair finished concrete surfaces.

Material and labour Reinforced cement concrete M-25 (design mix) using 20mm graded stone aggregate as in lintels and beams all as specified.

Material and labour for Reinforced cement concrete M-25 (design mix) using(12.5 mm graded aggregate) steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed and including necessary form work completed.

Material and labour Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 type B1 1:2;4 using 20 mm graded aggregate, complete

Material and labour rendering 15 mm thick CM 1:6 on concrete / brick surfaces finished even and smooth with out using extra cement

Returning, filling in soils, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick with soil.

Removing excavated material (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point.

Material and labour 20 mm thick broken glass coping in cement mortar 1:3 on top of the walls.

Material and labour for Preparation of newly plastered /concrete surfaces of wall and applying two coats of cement based paint all as specified and directed.

Supply and fixing Mild steel work as in angle iron horn in post and struts in fencing including setting and benching to shape required, drilling holes, notching for wire and fixed in posn etc complete conforming to Fe-410-0 or Fe 310-0 complete all as specified.

Material and labour for Preparation of new steel and iron surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome primer.

Supply and fix galvanised punched tape 1A concertina coil 450mm dia stretch length 6m fixed or welded to angle iron brackets and fixing to barbed wire with necessary fixing arrangement complete all as specified and as directed.

Supply and fix barbed wire galvanised steel 2 strand 2.24 mm dia with 2 mm dia barbs at 75 mm spacing and stringing and fixing to fencing posts including securing or tying with and privious of galvanised mild steel wire staples or steel pins etc and all as specified and directed (each line of horixontal or diagonal wire shall be measured separately).

Surface excavation in Hard/dense soil n.exc 30 cm and average 15 cm deep including clearing away all grass ,vegetation,sapling,shrubs ,bushes,wood,under growth roots n.exc 30cm girth and removing the rubbish uo to a distance of 50 m and depositing where directed complete all as specified and directed complete all as specified and directed .

Material and labour 150 mm thick hardcore of gauge n exc. 63 mm, of broken bricks,deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

Material and labour 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded aggregate) as in Sub base, Complete all as specified and directed.

Material and labour 75 mm thick PCC type B-1, 1:2:4 (using 40 mm graded aggregate) as in Sub base, Complete all as specified and directed.

Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green.

Material and labour providing granite or trap stone kerbs,roughly squared of size 20 cm x 30 cm and length of stone shall not less than 45 cm, fixed in position and jointed in CM 1:6 including necessary excavation,returning filling in soft / hard soil

Material and labour forming construction joint 30 mm deep x 10 mm wide filled with sealing compound grade A

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

Supply and Fix Anodised aluminium snap grid frame work for false ceiling, size of grid 605mmx605mm ,T angle 1.5mm thick complete all as specified.

Material and labour for Hangers 4 to 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners12.5mm dia, 40mm long complete all as specified.

Material and labour for pre- painted Gypsum board/tiles 12 mm thick in ceiling insulation and acoustic purposes, 600 x 600 mm in size, fixed with screws to aluminium frame work or with staples on snap grid in ceiling all as per manufacturers instructions and as directed.

Material and labour RCC 1:2:4 Type B1 (20 mm graded aggregate ) nominal mix as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

Supply of liquid water proofing compound with above item

Material and labour for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame as per specification of drwaing.

Supply and fixing PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification of drwaing.

S R Trading Co

SRI MAHALAKSHMI CONSTRUCTIONS

BYRAVESHWARA CONSTUCTION

Global Enterprises

chowdeshwariconstructionco

Aditya Associates

Maruthi constructions

ADWITHI