REPAIRS TO OFFICERS GUEST ROOMS, OFFICERS INSTITUTED, SINGLE LIVING OFFICER ACCN, TD BILLETS, SNCOS AND AIRMEN GUEST ROOM IN DOMESTIC AREA AT AF STN JAISALMER

Amount

Taking down door chowkats or frames exc.1.5sqm but nexc 4 Sqm each with shutters (without taking off shutters from the frame).

Taking down door shutters of any description of area exc 1Sqm & n.exc 2 Sqm complete all as specified and as directed.

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, doors or gates, ladders, framed balusters, walk ways, railings, frame work of watertanks etc ant type of work complete all as specified and directed. Fe 410 -W (Gde- E- 250) quality-A

S&F 2nd class hard wood plain, framed , paneled shutters 35mm thick (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part-I) , kiln seasoned and chemically pressure treated complete

S&F 2nd class Hard wood glazed/skeleton shutters 35mm thick open rebated prepared to receive glass, gauze etc devided in squares with plain, chamfered or rounded, mitred and rebated sash bars any number with plain, chamfered or rounded, mitred and rebated beads for securing glass gauze etc. complete all as specified and as directed.

M&L for PCC type B-0, 1:2:4 using12.5 mm graded stone aggregates as in bands, bed blocks, fixing hold fasts, filling of door frames etc complete incl necessary formwork all as specified.

Taking down door chowkats or frames n. exc.1.5sqm each with shutters (without taking off shutters from the frame).

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm th rigid PVC foam sheet reinforced with MS sq tube as per specification compl

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.

Taking down window chowkats or frames n. exc.1.5sqm each with shutters (without taking off shutters from the frame).

M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) for frame, shutters of doors, windows & ventilators & Partition including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F expanded metal mesh Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer - in- charge.

S&F Stainless steel (Grade S 304) wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc complete all as specified and as directed.

S & F 5 mm thick Figured glass and fixed to aluminium Ventilation in square exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 100mm long Butt hinges, extruded aluminium ally with galvanished mild steel hinge pin anodisedand fixed type B-21

S&F 100 mm long mild steel butt hinges medium weight cold rolled.

S&F 200 mm size aluminium anodised barrel tower bolt of extruded section .

S&F 300MM Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) & fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F 300 mm long ordinary rat rail rod pattern springs including roller and roller plate complete

S&F aluminum anodized handle cast type 150mm size

S&F in Repair 25 mm dia Stainless steel curtain rod with fixing fancy type brackets, stops, rollers etc.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for Double Charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but n. exc. 1.00 sqm, in floors etc.laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for Vitrified coloured ceramic tiles 10 mm thick as in skirting over and including 10m thick bedding layer in CM 1:3 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M&L glazed ceramic non skid joint free coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exc. 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed. (bed room and other room floor)

Coloued Johnson endura tiles size 400x400mm 10 to 12 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigment over 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L for (300mm x450mm) x 6 to 7 mm thick coloured glazed ceramic tiles as in dado etc over and including 15mm thick bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or any thickness in floors, aprons etc.complete all as specified and directed

M&L 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including cement screed bed in CM 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete necessary cutting, notching etc for sink.

Taking up or down steel tubing and connections 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 20mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 25mm bore complete all as specified and directed.

S&F steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed.

S&F steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed.

S&F steel water tubing `medium grade’ galvanized 25 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed.

M &L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Brick /stone wall.

S & F in repair 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks TRIPPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve complete all as specified in SSR Part I including disconnecting/ dismantling of existing tank complete all as specified and directed.

Supply & fix 500 Litre Capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float Valve complete all as specified in SSR Part I including disconnecting/dismantling of existing tank complete all as specified and directed

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete.

Rendering 10 mm thick in cement mortar 1:6 on brick work or concrete surfacces and stone masonary and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete or stone wall surfaces in cement mortar 1:4 mixed with water proofing chemical as per manufacturer instructions of make: FOSROC/STP. complete all as specified and directed.

M & L for rendering 5 mm thick on uneven faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and fair without using extra cement complete all as specified and directed.

M&L for complete removal of existing treatment, filling up undulation and applying a coat of readymixed wall putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over a one coat of primer after smoothening of surfaces complete of wall.

M & L for prepariation of old treated surfaces and applying one coats of white wash on surfaces of ceiling.

M/L for two coat of oil bound distempering on newly plastered wall surfaces over a coat of primer finished even and smooth complete

M&L for preparing of new plastered sufarce of ceiling and applying three coats of white wash all as specified and directed.

M&L for prepration of old painted wooden surface of any description not other wise described exc 10 cm width or grith and applying one coat of synthetic enamel paint.

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamealle paint over a coat of pink primer. complete all as specified and as directed.

M&L for preparation of old Painted steel surfaces of any description exc 10 cm width or girth as in steel gate,swan neck fencing posts, steel door, window etc and applying one coat of synthetic enamel paint with appropriated arrangements complete all as specified and directed.

Preparing old decorative or unplastered surfaces of walls by brooming down,scraping down smoke soot,mould ,moss and effloresence salts and greasy spots and applying one coat of exterior emulsion paint (APEX of Asian paints or equivalent in NEROLAC,JENSON& BERGER PAINTS ) of any colour as approved by GE complete all as specified and directed,

Preparing New Plastered surfaces of walls and applying two coat of exterior emulsion paint (APEX of Asian paints or equivalent in NEROLAC,JENSON& BERGER PAINTS ) over a coat of Primer of any colour as approved by GE complete all as specified and directed.

S&F repairs Vitreous china wash down water closet pan (pedestal pattern) with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottomand cover and mild steel chromium plated or aluminised hinging device. complete all as specified and as directed.

S&F in repair water closet vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest front/back inlet (excluding flushing cistern and flush pipe) including provision of cement concrete bedding in PCC(1:5:10) type E2 and making good to disturb surface

S & F in repairs wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe as specified.

S&F in repairs low level flushing cistern 10 ltrs capacity, valveless, syphonic action type with inlet, ball valve, float and handle, body moulded from virgin quality high impact poly propoliyone including brackets and 32 mm dia PVC flush pipe for low level flush cistern complete all as specified and directed

S & F in repair 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F in repair fancy type chromium plated 15 mm bore angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F as in Repair wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting 'Continental Range, Model No : CON 273 KNUPR) or equivalent

S&F in Repair health faucet (ABs body) with 8mm dia one meter long flexible tube in chrome finish incl wall hook & wall work incl fixing compl (Make : JAQUAR,Model No ALD-579)or equivalent

S&F in Repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."make-code-ACN-1153S

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with fixing chromium plated bracket, guard and railing 55/56cm long complete.

S & F in repair brass chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges.

S&F in repair 15 mm bore Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed (JAQUAR,Model No CON- 167 KNB)or equivalent

S & F in repairs Chromium plated shower rose 75 mm dia with CP arms with swivel joints, including fixing to steel pipe or union.

S & F in repair PVC connections suitable for 15 mm dia pipe with PTMT nut of length 600 mm.

S & F in repair PVC (SWR) floor trap of 75 mm outlet plain with grating including jointing with solvent cement.

S&F in repair PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints laid in trenches/floor or fixed to walls including digging and making good as existing.

S&F in repair 110 mm PVC (SWR) Junction single (Single T) equal or unequal with access door

S&F in repair 110mm dia PVC (SWR) vent cowl .

S&F in repair PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to walls including digging and making good as existing.

S&F in repair 75mm dia PVC (SWR) bend any radius with access door .

S&F in Repair Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays.including bolts and nuts and securing ends of stays to wall or roof in dia 110mm pipe complete all as specified

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete

M&L Cement concrete 1:3:6 type C2 (40 mm graded stone aggregate) 75 mm thick in plinth protection and provided joints 10 mm wide & full depth at 3 m distance and every change of direction filled with sand and bituminious mix 1:3 complete all as specified and directed.

M & L 25 mm cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) as in 25 mm thick levelling coarse in flooring finished even and rough.

M&L for repairing of RCC projection,chajjas,roofs,facia,column etc by necessary preparation i.e scarping, cutting, chiseling,derusting and cleaning exposed reinforcement, surface of damaged,loose RCC surface and applying one coat of rust remover by brushing to rusted reinforcement to remove loose rust particles and allow to dry it for 2 to 3 hours,insert the new reinforcement to damaged portion by drilling hole at required distance,fill the epoxy in to the hole by 2/3 of the hole and insert the reinforcement in the hole, and binding the reinforcement at rusted portion of reinforcement,apply cement slury on entire damaged area,and plaster the surfaces with cement,sand and polymer liquid in 1:3:15% of cement by weight ) and water as required ,mixing properly and plaster the surface ,finished even and smooth by making the edge water dropping groves complete all as specified and directed. Note: cost of formwork shall be deemed to be included.

Providing Factory Made 18mm thick 100% Solid WPC decorative ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm as per ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, : For WC/Bathroom/Toilet/Kitchen/Balcony Doors and Cabinets.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc.

M&L for precast cement concrete solid blocks ( 1:3:6 ) type C-I (using 20mm graded stone aggregate) exc 10cm in width as in block masonry built in CM 1:6 etc complete all as specified.

S & F in repairs for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

S&F of Toughned glass as in hinged doors, partitions automatic doors, Steel Railings including cutting to shape, drilling holes required.

S&F in repairs Vitreous china wash basin with full Pedestal white flat back size 575 x 460 x 180mm incl waste pipe chain plug brackets complete all as specified and directed.

S&F in repairs Vitreous china wash basin with Cabinet with provision to keep toileteries with mirror incl waste pipe chain plug brackets complete all as specified and directed.

S&F in repairs 5 mm thick high qualitybavelled looking mirror glass fixed button screw complete all as specified and directed by engr-in-charge.

S&F in stainles steel urinal spreader complete all as specified and directed by engr-in-charge.

S&F in repairs water tank lid of cap 500 ltr /1000 ltr cap complete all as specified and directed by engr-in-charge.

S&F in repairs snow white vitreous china EWC single peice type 700X370X645 mm incl seat cover and flush fittings complete fixed in floor with brass screw complete of Parryware, Johnson Pedder complete all as specified and directed by Engr-in-Charge

M & L for 4 mm thick 595 x 595 mm eco board classic as in false ceiling incl powdr coated incl Gi grid system and adjustabe suspender and fastening arrangement complete all as specified and directed.

S & F Stone wall/floor cladding with jaisalmer yellow stone having minimium 18mm thickness including outer face properly polished and fixed on wall with fastner and adhesive with CM 1:3 and all holes should be filled with coloured cement/ chemical to match the stone colour washing of complete prepared with mixture of water and acid followed by coloured cement polishing to match the natural texture of stone incl demolition of extg stone fixed portion all as specified and directed.

S&F Pre- painted galvalume aluminum SMP coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F 2 mm thick polycarbonated sheet of any colour having used as in chajja projection/roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for two coats of plastic emulsion paint over a coat of primer/ wall care putty in different tint and similer works including complete removal of existing treatment and prepration of old plastered surface complete all as specified and directed.

Dismantling of existing water proofing treatment,concrete works of any location up to existing RCC slab by chiesling,drilling,scraping etc.complete all as specified and directed.

M&L for 20mm thick cement screed in cement mortar 1:4, including finishing even and smooth with out using extra cement mixed with water proofing compound @3% by weight of cement over cleaned roof surface, as in grading to RCC roof surface,complete all as specified. Note - Water proofing compound shall be measured and paid separately.

M & L for applying fibre reinorcement elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflecivity index (SRI) upto 105 on top of concrete roof in three coats @ 10.76 ltr/10 Sqm. One coat of self -priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid 500 microns) after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. Make : CICO Thermoseal XL or equivalent in MYK arment , BASF,FOSROC.

S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC Sheet inclusive of solvent cement and fixing at site on pvc frame as per specifications and drawing

S&F 5mm thick PVC Sheet fillet of width 35mm for wall panelling inclusive of fixing om to wall to make PVC frame as per specifications and drawing

S & F 35 mm thick flush shutters, board solid core construction, with block board core and plywood face panels, and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F in repair 600 mm long with lower hanger stainless steel fancy type towel rack as per specifications and directed by engr-in-charge.Cat part No-CAN-CHR-1181S (Make-Jaquar) or Equivalent.

M/s Ramesh & Company (BID ID -3478020)

M/S MAYA CONSTRUCTION COMPANY (BID ID -3477951)