Repairing and extension of street lighting line from Hanuman Mandir fatak to Weighbridge, siding1 by re stringing AB cable and fitting 200W LED street lights at Y Curve siding, ILBL OCP, Lakhanpur Area, MCL

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc. and painting with primer and finished paint as required

Supply of  Outdoor Type, IP 55 Street Lighting, Out door  Feeder/timer panel control panel comprising 4P 100A contactor, 100A 4P MCCB, digital timer, connector, indicating lamps, toggle switch, fuse carrier and base, fully wired with connecting Cu leads and lugs and all other suitable accessories as per instruction of Engineer in charge

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required.

Providing of 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supplying and erection of 100 mm X 65 mm pin insulator complete with G.I. Spindle and nuts etc. as required

Supplying and erection of 75 mm X 90 mm shackle insulator with G.I. Bolt, nuts and straps etc. as required

Supplying, installation, Testing & Commissioning of 200W Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Brands like: Havells, Phillips, CG, Bajaj, Orient & equivalent

Erection of Loading, Unloading, Handling, laying and stringing of AB Cables/PVC cable at Integrated LBL, Lakhanpur Area.

Total impact of Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC