Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹17.4 Laccepted-aoc | ₹17.4 L | accepted-aoc |
Tender Value
₹24.7 L
EMD Value
₹50,000
Closing Date
17 Jun 2026, 10:00 pmClosed
Directorate of Municipal Administration
ANUPAMA
Construction of drains, repair of toilets and security rooms and replacement of sheets of vermicompost shed at the garbage disposal unit in Ajjagondanahalli Tumkur Corporation Limts
DMA/2026-27/OW/WORK_INDENT59587
DMA/2026-27/OW/WORK_INDENT59587
Open
Other Works
Electronic Documents, First(One Cover)
DMA City Corporation Tumakuru
5 documents required · 5 mandatory
₹620
₹50,000
17 Jun 2026
9 Jun 2026
12 Jun 2026
Construction of drains, repair of toilets and security rooms and replacement of sheets of vermicompost shed at the garbage disposal unit in Ajjagondanahalli Tumkur Corporation Limts
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cauti...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Formwork As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.For Drain works consider 35% of item concrete rat...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Supplying and laying at site Factory made perforated hard HDPE subsoil drainage pipes pre-wrapped with 150 gsm Geotextile for subsoil drainage system including all necessary coupling/ fittings for jo...
CC(1:2:4) for Floors, Hardpaths, Footpaths: Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. )300 x 200 x ...
Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge,Asbestos cement sheet
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge,G.S. Sheet
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking to the appropriate disposal area as per direction of Engineer-in-charge.
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prim...
Cement Plaster-Single Coat-BrickMasonry-CM(1:4)-15mm:: Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...
Skirting,Dadoing,Rises of steps-Color Glazed Tiles-CM(1:3)- [Colour glazed iles 6mm thick]: Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement...
Chipping unsound weak concrete material from slabs. Beams, columns & roofs upto 50mm by manual means or by standard power driven percussion type including cleaning reinforcement with wire brush
Cutting out cracks of roof terrace to V - section cleaning out, wetting, grouting with cement and sand slurry 1:3 (1 cement, 3 sand) including cost of materials, labour, complete as per specifications...
Polyurethane based Single Component for Existing Surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dis...
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of Engineer i...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting as per IRC:67:2022 with vertical and latera...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia
Providing and fixing PTMT urinal cock of approved quality and colour busing 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 g.
Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 122mm long, weighing not less than 99 g
Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms
Oval shape mirror-450x350mm::Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed wi...
Towel rail-600mm Length: Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.- ...
CPVC Pipes-32mm OD(External wall):: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded ...
CPVC Pipes-Nipple-20mm: Providing and fxing PTMT extension nipple for water tank pipe, fttings of approved quality and colour.
Brass Gate Valve CI Wheel-32mm: Providing and fxing Brass full way valve gate with C.I. wheel of approved quality (screwed end)- 32 mm nominal bore
Brass stop cock-20mm:: Providing and fixing brass stop cock of approved quality :-20 mm nominal bore
Brass Bib Cock-20mm:: Providing and fixing brass bib cock of approved quality : :-20 mm nominal bore
Water Storage Tank:: Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making nece...
Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)
Supplying wall mounting fan suitable tooperate at single-phase 230v AC. supply.300 mm Sweep
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Supplying ...litres capacity vertical/horizontal type wall mounting Electrical water heaterwith 22SWGcopper/SS sheetmetal inner Container tinned inside Fiber bodyoutside, filledwith glasswool betweeni...
Supplying 1.1kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 2.5 to 25 Sqmm
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
MS Box-14 SWG: Fabricating supplying and mounting MS box made out … 16 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged...
MCB:- 6-32 Amps DP Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross 3 with S...
Porcelain fuse channel- 16 Amp Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 16Amps
Groove Cutting- *Brick Masonry::- upto 50mm conduit in brick wall Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finis...
Concealed Conduit System::- 19/20 mm dia 2 mm thick: Supplying heavy gauge PVC conduit pipe ...... mm dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction bo...
Open Conduit System:- 19/20mm dia, 2mm thick: Supplying heavy gauge PVC conduit pipe ....... dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste et...
PVC/metal conduit Deep junction box: 19/20mm Deep junction box: Supplying and fixing PVC/metal conduit Deep junction box: 19/20mm deep junction box
Point wiring using Copper wire with switch-Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch: Supplying and wiring adopting loop system in existing PVC Conduit /ca...
Wiring for lighting/power circuit:: 2.5 mm Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core i...
Modular Switch- 6Amps-1way Switch:: Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. -6Amps one way Switch.
4mm thick Plastic sheet-Fixing switches, regulators: Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or meta...
Lamp Holder: Supplying & Fixing of 70-150 Watts lamp holder 2 Pin
RETROFIT-LED BULB-9W: Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, ...
LED Tube-PVC Batten-1 x4'- 20/22 W: Supplying of .....feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI...
Fixing-Light Fittings-23/0.0076” twin twisted PVC insulated wires: Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceili...
CPVC Pipes-32mm OD(External wall): Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded f...
Supplying and fixing of round or oblong type bulk head fitting glass cover.
Summersible Pump Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instruction...
Summersible Pump- Cable- 3C x 1.5 mm2 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Vi...
Brass Gate Valve CI Wheel-32mm: Providing and fxing Brass full way valve gate with C.I. wheel of approved quality (screwed end)- 32 mm nominal bore
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineerin- charge: Powder coated minimum thickness 50 micron aluminium including...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw2 59587.doc
Tender Document • 0.22 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .