Construction of Community Hall at Vadakattalai in Nedungadu Commune

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

Supplying and filling with good earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in deapth consolidating each deposited layers by ramming and watering etc. complete including all lead and lift.

Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement: 5coarse sand : 10 graded stone aggregate 40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering,shuttering,finishing and reinforcement -All work upto plinth level : 1:1.5:3 (1 cement : 1 .5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in walls(any thickness), including attached pilasters , buttresses, plinth and string courses , fillets, columns , pillars,piers, abutments, posts and struts etc.upto floor five level excluding cost of centering, shuttering,finishing and reinforcement: 1:1.5:3 (1 cement : 1.5coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in beams , suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Centring and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs,landings , balconies and access platform -Using steel sheet with M.S.frames

Centring and shuttering including strutting, propping etc.and removal of form for:Foundations , footings, bases of columns ,etc. for mass concrete.- Using steel sheet with M.S.frames

Centring and shuttering including strutting, propping etc. and removal of form for: lintels, beams, plinth beams, girders, bressumers and cantilevers.- Using steel sheet with M.S.frames

Centring and shuttering including strutting, propping etc. and removal of form for: columns,pillars,piers,abutments,posts and struts.- Using steel sheet with M.S.frames

Centring and shuttering including strutting, propping etc. and removal of form for: Stairs (excluding landings) except spiral - staircases - with water proof ply 12mm thick , mango / silver wood scantling and casurina poles

Providing ,hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands copings, bed plates, anchor blocks, pla window sills and the like including the cost of required centring, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Reinforcement for R.C.C work including straightening , cutting , bending , placingin position and binding all complete -Thermo - Mechanically treated bars(TISCON /VIZAG/IISCO/SAIL/JSW) including placing the M30 grade Athees make cover block @60cm centre to centre.

Brick work with FPS bricks of class designation 35 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand).

Brick work with FPS bricks of class designation 35 in superstructure above plinth level upto floor five level inall shapes and in cement mortar 1:4 (1 cement : 4 coarse sand).

Half brick masonry with FPS bricks of class designation 35 in superstructure above plinth level upto floor five level in cement mortar 1:4 (1 cement: 4 coarse sand).

Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position - Vengai wood

Providing and fixing panelled or panelled and glazed shutters for doors , windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding panelling which will be paid for separately. - Vengai wood - 35mm thick shutters.

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestorey windows including black enameled M.S bult hings with necessary screws excluding paneling which will be paid for separately country wood (Vengai) 30mm thick shutter.

Providing and fixing paneling or paneling and glazing in panelled or panelled and glazed shutters for doors,windows and deresfovey windows (area of op ening for panel interts excluding portion incide grooves or rebates to be measured) panelling for panelled or panelled and glazed shutters 25mm to 40mm thick –Vengai wood.

Supplying and fixing of steel grill work of m.s. angles,flats,squares and pipes including cost of welding charges, fixing in position in masonry walls with cement concrete 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 12.5mm nominal size) including one coat of priming coat etc. complete.

Providing 40x5 mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc.complete:-300x16mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete :-250x10mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete :- 100x10mm

Providing and fixing of 65mm Godrej Novtal lock of 6 levers etc., complete.

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc.complete - 125x65x2.12mm.

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc.complete - 75x47x1.70mm

Providing and fixing bright finished brass hard drawn hooks and eyes - 150mm

Providing and fixing 16mm M.S.Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase and making good and painting exposed portion of the clamps complete.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters. 80X0.90mm M.S. laths with 0.90mm thick top cover .

Providing and fixing ball bearing for rolling shutters.

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2nos.of 150mm long brackets of 15x15mm M.S.square tube, the vertical door profiles to be reinforced with 19x19mm M.S.square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame.The door frame to be fixed to the wall using M.S.screws of 65/100mm size complete as per manufacturers specification.

Providing and fixing to existing door frames - 25mm thick PVC flush door shutters upto 737mm width of colour and shade as approved made out of a one piece Multi chamber extruded PVC section of the size of 762mm x 25mm or less as per requirement with an average wall thickness of 1mm + or - 0.3mm.PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm.An MS tube having dimensions 19mm x19mm is inserted along the hinge side of the door.Core of the door shutter should be filled with High density polyurethane foam. The top & bottom edges of the shutter are covered with an end -cap of the size 25mm x 11mm.Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification and drawing to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will pasted at appropriate places.

Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc. complete. Electric resistance or induction butt welded tubes.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm + or- 5% total coated thickness (TCT), zinc coating 120 gsm asper IS:277 in 240 mpa steel grade, 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws or with polymer coated J or L h Books, bolts and nuts and or G I seam bolts and nuts, G I plain and bitumenwashers complete: Gutter (600mm over all girth).

Providing and laying fully vitrified floor tiles of size 60x60cm (thicknes to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make (Nitco /Rak / Johnson / Asian) in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600mm.

Providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of first quality conforming to IS: 15622 of approved make (Bell / Johnson / Regency / Somany / Naveen / Asian ) in all colors, shades, except white, ivory, grey, fume red brown laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing 1st quallity ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make (Jhonson / Asian / Somany / Nitco) in all colours, shades of size 200 x 300 mm as approved in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm. Including pointing in white cement mixed with pigment of matching shade complete. - size 200x300mm

Painting top of roofs with bitumen of approved quality at 17kg per 10sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete: With residual type petroleum bitumen of penetration 80/100.

Provding and laying in position cement concrete of specified grade exclludling the cost of centering and shuttering – All work upto plinth level 1:2:4 (1cement:2coarse sand:4 graded stone aggregate 20mm nominal size)

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes. 110mm diameter.

Providing and fixing unplasticised - PVC clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm

Providing and fixing on wall face unplasticised- PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Bend 87.5deg. 110mm bend.

Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Shoe (plain)110mm shoe.

15mm cement plaster on the rough side of single or half brick wall of mix: cement mortar 1:6 (1 cement : 6 fine sand) .

6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand)

12 mm cement plaster of mix - 1:5 (1 cement : 5 fine sand)

White washing with lime to give on even shade - New work (three or more coats).

Finishing walls with water proofing cement paint of required shade - New work. (Two or more coats applied @ 3.84 kg/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work.

Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern WC pan of size 580 x 440 mm.

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings flat back wash basin of size 550 x 400mm.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermalstability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete (Internal work exposed on wall) - 20mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete. (Internal work exposed on wall) - 25mm nominal outer dia pipes.

Providing and fixing brass bib cock of approved quality - 15 mm nominal bore.

Providing and fixing ball valve (brass) o approved quality complete. high or low pressure with plastic floats - 25 mm nominal bore.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete (Concealed work including cutting chases and making good the walls etc.) - 15mm nominal outer dia pipes.

Providing and fixing brass stop cock of approved quality-15mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank.

Supplying fixing and commisioning of Suguna/ Texmo /Sharp 1 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc. complete .

Constructing soak pit 1.20 x 1.20 x 1.20 m filled with brick bats including 110mm dia UPVC pipe (type B) 1.20 m long complete as per standard design.

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete.

Supplying and fixing of following size of PVC conduit alongwith the accessories in surface/recess Conduit including cutting the wall and making good the same in case of recessed conduit as required.Make:Avonplast/Vijaya:- 25mm dia .

Supplying and fixing of following size of PVC conduit alongwith the accessories in surface/recess Conduit including cutting the wall and making good the same in case of recessed conduit as required.Make:Avonplast/Vijaya:- 32mm dia .

Supplying and laying of following size of PVC conduit in roof slab alongwith the accessories .Make:Avonplast/Vijaya:- 25mm dia

Supplying and drawing of 1.5 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/PVC casing and capping as required.Make: Finolex/Polycab:-

Supplying and drawing of 2.5 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/PVC casing and capping as required.Make: Finolex/ Polycab:-

Supplying and fixing of following size of PVC deep junction box in required position along the line of PVC conduit as required .Make:Avonplast/Vijaya:- 25mm deep junction Box one way

Supplying and fixing of following size of PVC deep junction box in required position along the line of PVC conduit as required Make:Avonplast/Vijaya:- 25mm deep junction Box two way.

Supplying and fixing of following size of PVC deep junction box in required position along the line of PVC conduit as required Make:Avonplast/Vijaya:- 25mm deep Junction Box three way

Supplying and fixing of following size of PVC deep junction box in required position along the line of PVC conduit as required Make:Avonplast/ Vijaya:- 25mm deep Junction Box four way

Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required. Make:Avonplast/Vijaya:- 25mm Junction Box one way

Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required. Make:Avonplast/Vijaya:- 25mm Junction Box two way

Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required. Make:Avonplast/ Vijaya:- 25mm Junction Box three way

Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required. Make:Avonplast/ Vijaya:- 25mm Junction Box four way

Supplying and fixing of following size of steel conduit alongwith accessories in surface/recess including painting in case of surface conduit or cutting the wall and making good the same in case of recessed, conduit as required :- 32mm

Supplying and fixing of the following sizes of Teak wooden board on recess including cutting the wall and finishing the surface good the same as required - 375mm X 300mm X 50mm. Deep

Supplying and fixing of the following sizes of Teak wooden board on recess including cutting the wall and finishing the surface good the same as required - 150mm X 150mm X 50mm. Deep

Providing and fixing of following size phenolic coated sheet on existing wooden board: - 375mm X 300mm X 3mm Thick

Providing and fixing of following size phenolic coated sheet on existing wooden board: - 150mm X 150mm X 3mm Thick

Supplying and fixing S.P 1 way 5/6amps piano/flush type switch on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay :-

Supplying and fixing 3 pin 5/6amps piano/flush type socket outlet on the existing switch box/cover including connections etc. as required. Make: Kundan/Anchor/Vinay:-

Supplying and fixing 3 pin 15/16amps piano/flush type socket outlet on the existing switch box/cover including connections etc. as quired.Make:Kundan/ Anchor/Vinay:-

Supplying and fixing S.P 1 way 15/16amps piano/flush type switch on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay:-

Supplying and fixing 5/6amps indicator on the existing switch required.Make: Kundan/ Anchor/Vinay:-box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay:-

Supplying and fixing 10 amps Kit Kat Fuse on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay:-

Supplying and fixing 16 amps Kit Kat Fuse on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay:-

Supplying and fixing Electronic Dimmer 400W socket type on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay:-

Supplying and fixing jumbo type Batten/Angle Holder including connections etc. as required .Make: Kundan/Anchor/Vinay:-

Supplying and fixing 3 plate, 5 amp.ceiling rose on the existing junction box/wooden block including connections etc. as required.Make: Kundan/Anchor/Vinay:-

Installation, testing and commissioning of prewired, all kind of surface mount light fittings, complete with all accessories etc. directly on high ceiling/wall, including connections with 16/0.20 mm twin core FR PVC sheathed flat flexible, copper cable etc. as required.

Installation testing and commissioning of ceiling fan/wall mounting fan and wiring the down rod of standard length .(upto 30cm) with 14/.86mm Plastic insulated wisted Copper wire including earthing as required:

Supplying and fixing 32 Amps single phase D.P Pilot switch with indicator (surface/recessed) on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay:-

Earthing with G.I.medium pipe 3.0 mt long and 40mm dia including accessories 250 x 50 x 6 mm G.I clamp with 12mm bolt, nut and washer for connecting earth wire, RCC ring enclosure and cover plate complete as required:-

Service connection from electricity department supply post to department metre single phase line including labour charges 3/20 PVC insulated copper wire 7/10 G.I. wire parcel in reel etc., as required.

Supplying and fixing 1400mm sweep double ball bearing ceiling fan. Make:Almonard/Usha

Supplying and fixing 1 x 40W box type single tube light fitting with copper choke & starter Make: Philips/Bajaj with 40W tube light. Make: Philips

Supplyingg and fixing Bulk head fitting aluminium alloy body heat resistant prismatic glass cover with specially designed gasket (GLS 100W type). Make: Philips/Bajaj

Supplying and fixing 32A cutout fuse unit . Make: Kundan.