Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.3 LAccepted-AOC | ₹48.3 L | L1 | Accepted-AOC Accept |
| 2 | L2₹49.0 L+₹70,805 (1.47%)Rejected-Finance | ₹49.0 L+₹70,805 (1.47%) | L2 | Rejected-Finance Not being L1 |
| 3 | L3₹49.8 L+₹1.5 L (3.13%)Rejected-Finance | ₹49.8 L+₹1.5 L (3.13%) | L3 | Rejected-Finance Not being L1 |
| 4 | L4₹49.8 L+₹1.5 L (3.17%)Rejected-Finance | ₹49.8 L+₹1.5 L (3.17%) | L4 | Rejected-Finance Not being L1 |
| 5 | L5₹50.5 L+₹2.3 L (4.69%)Rejected-Finance | ₹50.5 L+₹2.3 L (4.69%) | L5 | Rejected-Finance Not being L1 |
| Sl No | Description | Qty | Unit | AR CONSTRUCTIONS L2 | Shri K.T. Manoj L3 | M/S SURAKSHA SECURITY SERVICES L4 | SHUVAM CONSTRUCTION L1 | JAS CONSTRUCTION L6 | KMS CONSTRUCTION L7 | M/s P.A.S. Construction L5 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for Complete all as specified and directed. | 42.5 | Cum | 900 ₹38,250 | 810 ₹34,425 | 980 ₹41,650 | 800 ₹34,000 Lowest | 920 ₹39,100 | 980 ₹41,650 | 950 ₹40,375 |
| 2.00 | M&L for laying PCC (1:4:8) type D2 (using 40mm graded aggregate) for sub base and mass concrete in foundation Complete all as specified and directed. | 30 | Cum | 8,500 ₹2,55,000 | 8,250 ₹2,47,500 Lowest | 9,500 ₹2,85,000 | 8,350 ₹2,50,500 | 9,000 ₹2,70,000 | 9,500 ₹2,85,000 | 8,650 ₹2,59,500 |
| 3.00 | M&L for 75mm thick PCC (1:3:6) type C2 using 40mm graded aggregate as in plinth protection including finishing even and smooth with using extra cement, complete all as specified and as directed. | 120 | Sqm | 650 ₹78,000 | 600 ₹72,000 Lowest | 850 ₹1,02,000 | 600 ₹72,000 Lowest | 700 ₹84,000 | 850 ₹1,02,000 | 700 ₹84,000 |
| 4.00 | M&L for 40 mm thick cement concrete type B1 1:2:4 (20 mm graded stone aggregate) in wearing course/padding concrete complete all as specified and as directed. | 150 | Sqm | 500 ₹75,000 | 500 ₹75,000 | 700 ₹1,05,000 | 450 ₹67,500 Lowest | 600 ₹90,000 | 700 ₹1,05,000 | 500 ₹75,000 |
| 5.00 | Material and labour for PCC (1:3:6) type C2 using 40mm graded aggregate as in surface channels and drain, complete all as specified and as directed. | 5.5 | Cum | 900 ₹4,950 Lowest | 8,600 ₹47,300 | 980 ₹5,390 | 8,500 ₹46,750 | 950 ₹5,225 | 980 ₹5,390 | 9,400 ₹51,700 |
| 6.00 | M&L for Heavy duty vitrifired coloured tiles 400x400x10 mm thick each of tiles in floor/steps/stairs etc set jointed and pointed in neat cement slurry in floors incl 15mm thick screed in CM 1:4 complete all as specified and directed | 300 | Sqm | 2,100 ₹6,30,000 | 2,150 ₹6,45,000 | 2,500 ₹7,50,000 | 2,000 ₹6,00,000 Lowest | 2,200 ₹6,60,000 | 2,500 ₹7,50,000 | 2,890 ₹8,67,000 |
| 7.00 | Demolition of precast concrete work/ block walling built in cement mortar complete all as directed. | 24 | Cum | 605 ₹14,520 | 620 ₹14,880 | 700 ₹16,800 | 600 ₹14,400 Lowest | 650 ₹15,600 | 700 ₹16,800 | 750 ₹18,000 |
| 8.00 | Material and labour for PCC solid block masonry (1:3:6) (using 20mm graded stone aggregate) straight or curved on plan exc 6m mean radius, exc 10cm in width and built in CM (1:6) complete all as specified and as directed | 24 | Cum | 11,550 ₹2,77,200 | 11,660 ₹2,79,840 | 9,500 ₹2,28,000 Lowest | 11,500 ₹2,76,000 | 11,600 ₹2,78,400 | 9,500 ₹2,28,000 Lowest | 11,190 ₹2,68,560 |
| 9.00 | Taking down cement plaster on brick or stone wall and racking out joints hacking for key sucrubing down with water etc. as directed. | 80 | Sqm | 95 ₹7,600 | 92 ₹7,360 | 100 ₹8,000 | 90 ₹7,200 Lowest | 100 ₹8,000 | 100 ₹8,000 | 120 ₹9,600 |
| 10.00 | M & L for rendering 10 mm thick in cement mortar 1:4 on concrete or brick masonry surfaces finishing the top surface even and fair without using extra cement complete all as specified and as directed | 280 | Sqm | 295 ₹82,600 | 295 ₹82,600 | 150 ₹42,000 Lowest | 290 ₹81,200 | 350 ₹98,000 | 350 ₹98,000 | 350 ₹98,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
20 Jun 2025, 6:00 pmClosed
GE, Minniebay, Sri Vijaya Puram
GE, Minniebay, Junglighat (PO), Sri Vijaya Puram -744103
8605/E8 -COMPREHENSIVE REAPIRS TO DRAINS AND RETAINING WALL AT AJAY BAGH ETC UNDER AGE B/R-I OF GE MINNIE BAY, SRI VIJAYA PURAM
2025_MES_711332_1
8605/E8
Open Tender
Civil Works
Item Rate
270 days
GE, Minniebay, Sri Vijaya Puram
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
Yes
GE, Minniebay
₹90,000
Yes
23 Aug 2025
30 May 2025
23 Jun 2025
30 May 2025
20 Jun 2025
13 Jun 2025
Amount
Demolition of cement concrete of any description and in any position not otherwise specifically provided for Complete all as specified and directed.
M&L for laying PCC (1:4:8) type D2 (using 40mm graded aggregate) for sub base and mass concrete in foundation Complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C2 using 40mm graded aggregate as in plinth protection including finishing even and smooth with using extra cement, complete all as specified and as directed.
M&L for 40 mm thick cement concrete type B1 1:2:4 (20 mm graded stone aggregate) in wearing course/padding concrete complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C2 using 40mm graded aggregate as in surface channels and drain, complete all as specified and as directed.
M&L for Heavy duty vitrifired coloured tiles 400x400x10 mm thick each of tiles in floor/steps/stairs etc set jointed and pointed in neat cement slurry in floors incl 15mm thick screed in CM 1:4 complete all as specified and directed
Demolition of precast concrete work/ block walling built in cement mortar complete all as directed.
Material and labour for PCC solid block masonry (1:3:6) (using 20mm graded stone aggregate) straight or curved on plan exc 6m mean radius, exc 10cm in width and built in CM (1:6) complete all as specified and as directed
Taking down cement plaster on brick or stone wall and racking out joints hacking for key sucrubing down with water etc. as directed.
M & L for rendering 10 mm thick in cement mortar 1:4 on concrete or brick masonry surfaces finishing the top surface even and fair without using extra cement complete all as specified and as directed
M & L for preparation of surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE Colour required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as directed by the Engineer-in-charge and as per manufacturers instructions. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion). Note: Rate inclusive of scaffolding at any height.
M & L for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @ 1.67 ltr/10 sqm over complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion). Note: Rate inclusive of scaffolding at any height.
M & L for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint (company depot tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint with silicon additives coat applied @ 1.67 ltr/10 sqm over complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion). Note: Rate inclusive of scaffolding at any height.
M&L Preparing old steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed
M&L for plain cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings cavings, bed plats and embeding swan neck fencing post, etc incl weathering slightly rounded or chamfered angles and throating as directed complete all as specified and directed.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick center lines,stop lines,dashes,arrows etc.and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed by the Engineer-in-Charge.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and as directed
S & F Aluminium flat iron work in, wind ties screwed as directed, including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and as directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Excavating in post holes in hard/dense soil n.exc. 0.5 cum and getting out returning, filling in and ramming in layers n.exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50 mtr and making good the surface complete all as specified and as directed.
S&F MS Roof trusses (Framed), trussed, purlins, rafters, crane gantries, rails ,posts and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.including necessary welding confirming to Fe-410-W(Gde-E250 quality-A) complete all as specified and as directed.
M&L Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed
Rough Excavation over areas n.exc. 1.5M deep and getting out as in loose/soft soil all as specified and directed.
Excavation over areas n.exc. 1.5M deep and getting out as in loose/soft soil all as specified and directed.
Excavation over areas exc. 1.5m and n. exc 3.0 m deep and getting out soft/loose Soil of complete all as specified and as directed.
M&L RCC M30 grade (Design Mix) using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams; bases for coloumns, etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L RCC M30 grade (Design Mix) using 20mm graded stone aggregate as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footing including attached pilasters and buttresses complete all as specified and directed.
M&L for use and removal of steel form work to sides of concrete foundations, footings,rafts and raft beams sides and soffits of foundation and plinth beams and similar work for flat surface all as specified
M&L for use and removal of steel form work to faces of walls retaining walls, abutments, parapets and like for flat rough fineshed surface all as specified and as directed.
M&L for use and removal of steel form work to faces of walls retaining walls, abutments, parapets and like for flat fair fineshed surface all as specified and as directed.
M&L for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns, hooking end and binding with and incl mild steel wire not less than 0.9mm dia or securing with clip quality confirming to deformed or twisted bars all as specified and directed.
M&L for TMT bars 6 to 8mm dia, bent to shape required incl cranking, bending, spirally for hooping for columns, hooking end and binding with and incl mild steel wire not less than 0.9mm dia or securing with clip quality confirming to deformed or twisted bars all as specified and directed.
M&L Boulder filling dry, handpacked tightly, as in wire crate apron bunds (Wire crate measured separately) all as per specified and directed.
S & F PVC pipe 110mm dia as in weep holes all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.
Back filling of Moorum/Soil in reataining wall or pavings, laid in layers n exc. 15 cm all as specified and directed. thick, spread, levelled and rammed including watering
Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.
M&L for 30mm thick FRP moulded grating with opening not Exc 30mm x 30mm not less than 6 mm thick framed in bonded material any colour complete fixed to drains after repairing the edges and directed by Engr-in-Charge Note :- Repairs to drain shall be measured and paid seperately
AR CONSTRUCTIONS (BID ID -3322972)
Shri K.T. Manoj (BID ID -3322699)
M/S SURAKSHA SECURITY SERVICES (BID ID -3325896)
M/s P.A.S. Construction (BID ID -3322719)
JAS CONSTRUCTION (BID ID -3324372)
KMS CONSTRUCTION (BID ID -3326082)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .