SPECIAL REPAIRS TO BLDG NO P-2 AND EXTERNAL SEWAGE PIPELINES TO AVOID OVERFLWING OF SEWAGE CHAMBERS IN OTM AREA AT INS SHIVAJI LONAVLA

Amount

Taking down asbestos cement (corrugated ,semicorrigated ,etc.) sheets in roof covering.

Dismantling timber scantlings 40 sq. cm and over in section, in any position Framed trusses and purlins

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for Second class hard-wood Clean sawn in scantlings in timber framed for rafter and purlin in roof

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour and any width having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour and any width having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, eaves boards, valley gutters for rain waters fixed with self tapping screws as specified.

S&F MS flat 40mmx6mm wind ties for roof including securing bolts ,posts and struts including all necessary drilling bolt or riveting etc. and similar work confirming to FE-290 Gde E-165

S&F Rolled mild steel section in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc quality conforming to Fe 410-W (Gde E250) quality-A.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets/Aluminium snap grid

M&L for powder coated aluminium snap grid frame work for false ceiling, with aluminium angle 25mmx25mmx1.5mm fixed to perimeter of wall, Main 'T' runner 38mmx25mmx1.5mm and secondary/cross 'T' runner 25mmx25mmx1.5mm to be interlocked in such a way that the size of grid shall be 605mmx 605mm including 6mm dia GI hangers (upto 1200mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40x3mm, 60mm long and expansion hold fastners 12.5mm dia, 40mm long complete all as specified and as directed. Note:- The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE.

S&F 4 mm thick Non Asbestos (E-board) designer tiles (Electra) suitably fixed in false ceiling grid /frame with staples or screws complete all as specified and as directed.

Dismantling floor, hearth or wall tilling including cement mortor bedding (but not backing), removing serviceble tiles to store and rubbish off the premises complte all as specified.

Demolition of stone slabs and tiles of any description or thickness in floor aprons etc laid bedded and pointed in any mortor complete all as specified.

Demolition of cement concrete (unreinforced) bove or below ground level and in any description

M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:6

M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:6

Ditto all as per item No. 16 above but in skirtings /dado and verical surfaces over and including 10 mm thick backing coat cement plaster in CM 1:4

M&l for Glazed ceramic tiles of any colour in vertical surfaces 300x600x7 to 9mm thick/ 300 x 450 x 7 to 9 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat cement plaster in CM 1:4

M&L for 18 to 20 mm thick Granite (of any type) work in single piece (table rubbed and polished) in steps, floors, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 20mm thick CM (1:6) bedding layer complete all as specified and as directed.

M&L for Machine cut green marble slab, 18-20mm thick, single piece in full length of window cill/jamb over and including cement mortar screed/backing coat, 15 mm thick in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) 25 mm thick as levelling course complete all as specified.

Demolition of Brickwork or stone/bou-lder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces and finished even and smooth without using extra cement on walls

M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces and finished even and smooth without using extra cement on walls

M & L for rendering 20mm thick cement plaster (1:6) on stone masonary surfaces complete all as specified

Taking down steel/aluminium windows/ventilator of any size with all fittings complete

Taking down existing steel/aluminium door/ Partition any type

Taking down chowkats or frames N.exc 1.5 Sqm with shutter (without taking of shutter from the frame.

Taking down chowkats or frames exc 1.5 Sqm and n.exc 4.0 Sqm each with shutter (without taking of shutter from the frame.

S&F aluminium powder coated ventilator partly fixed and partly louvered type without sash of bars, section as per designation 63400 of IS 737, frame and intermediate made out of aluminium section of size 50.80 x 25.40 x 0.95 mm (Catalogue No 14027 of M/s Jindal) including necessary heavy duty louvers (adjustable with locking arrangements), jointing clips, rubber packing, anodised snap beading, screws alongwith 4.00mm thick pin headed glass for louvers and glazing etc complete all as specified and as directed. Note:- (i) The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (ii) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

Supply and fix aluminium powder coated fixed type ventilator without sash bar, centre to centre distance of horizontal members not exc 60 cm & vertical members not exc 45 cm with 4 mm thick plain sheet glass,rubber packing with & including following powder coated section as given in 'JINDAL' catalouge complete all as specified and as directed (i) Frame (SP) -20052 (ii) Frame (DP) - 20051 (iii) Glazing clip - 19352 Note: The thickness of powder coating shall not be less than 0.50 micron and tint shall be as decided by GE.

S&F aluminium powder coated single leaf partly glazed and partly panneled door in two panels having 12 mm thick MDF board both side laminated as bottom panell & 5 mm thick toughened glass on top panells on pivots along with hidroulic door closer, door lock, handle and other necessary builders haedware, glass fixed with rubber beading and glazing clips , MS clamp and using following powder coated aluminium section as given in "JINDAL" catalouge complete all as specified & as directed (a) Rectanguller tube -14005 (b) Shutter vertical - 19550, (c) Shutter Top rail -19563, (d) Shutter middle rail - 19525, (e) Shutter Bottom rail - 19563, (f) Glazing clips - 19352, (g) Handle - 18566

M&L for powder coated aluminium three track and three shutter (of equal width) sliding type window without sash bars including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), bearings two No's for each shutter with 4.00mm thick sheet glass for glazing shutters & stainless steel wire cloth of 0.36mm nominal dia of wire & average width of aperture 1.40mm for wire gauge shutters including following powder coated sections as given in 'JINDAL' catalogue complete all as specified and as directed :- (i) Frame (Bottom)-20620. (ii) Frame (Top & Side)-20621. (iii) Shutter vertical (Handle lock)-20846. (iv) Shutter vertical (Int lock)-20845. (v) Shutter (Top)-20844. (vi) Shutter (Bottom)-20847. Note :- (i) The window opening shall be provided with three shutters of equal width. (ii) Two shutters shall be glazed shutters & one shutter shall be with stainless steel wire cloth all as specified hereinbefore. (iii) The shutters shall be placed in such a manner that at a time the entire width of window can be utilized as fully glazed window and at time the same can be utilized as partly glazed and partly gauzed window. (iv) The thickness of powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (v) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

S&F aluminium powder coated partions partly glazed and partly panneled with 12 mm thick MDF board in bottom panel and 5 mm thick tinned in top panels fixed with clips, aluminium beads, rubber gasket etc centre to centre distance of vertical member shall n. cxe 1.10 mtr using following powder coated aluminium section as given in "JINDAL" catalouge complete all as specified & as directed (a) SP -20048 (b) DP - 20047, (c) Glazing clips - 19352. Note :- The thickness of powder coating shall not be less than 0.50 micron and tint shall be as decided by GE.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified

S & F 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, with commercial face veneers.

S&F 100mm butt hinges, stainless steel medium weight fixed with stainless steel screws.

S&F aluminium handles cast type anodised 150mm size.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 250 mm size.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of sextruded sections or cast aluminium alloy and fixed 250mm length.

Cutting holes in brick wall or stone walls built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 or cement concrete (1:2:4), type B1 as requried for depth of embedded portion of hold fasts or lugs measured from the face of the Jamb into the wall exc half brick & N.exc one brick all as specified and as directed.

S&F Bands, straps, ; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165

S & F in repairs to Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165

Dismantling of cast iron/PVC or reinforced concrete drain pipes, jointed in cement mortor anf taking out of trenches if required 100/75 mm internal dia pipe complete all as specified.

S&F PVC (SWR) pipes of dia 110mm bore single socketed in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) pipe of 75 mm bore in single socketed in any length with rubber ring joints fixed to walls..

S&F PVC (SWR) bends of 75mm dia bore

S&F PVC (SWR) bends of 100 mm dia bore

M & L PVC Nahani trap100mm size with grating including jointing to waste pipe fixed in cement concrete type type B1 (1:2:4)

S & F Grating doom 100 mm dia of PTMT (minimum weight 25 Gms) complete all a specified

S & F in repairs Wash basin wall hung with half pedestal 550x400 mm as per CERA -CAT No. S2040105 wash basin and Cat No S2090102 Half pedestal or equivalent

S&F in repairs two piece EWC 680x360x765mm white, with seat cover and Twin flushing cistern complete all as specified and directed by Engr-in-Charge as per CERA -CAT No. S1021103 S Trap 230mm, CAT No S1060101 Cistern, CAT No B1510101 seat cover, CAT No B1810101 Twin Flush fittings or Equivalent

Vitreous China urinal, coloured of size 420x395x635mm large flat back with all fittings including spreader, CP connection suitable for 15mm bore stop valve, discharge pipe and taking down the existing one. Make Cera – CAT Nio.S4020102 and urinal Spreader Cera – CAT No.F8070201 or Equivalent

S&F Bib taps 15 mm dia, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm dia pipe fixed in repairs Make Cera – Cat No. F2006151 or Equivalent

S&F Pillar taps 15 mm dia, cast copper alloy, with capstan heads, fancy type chromium plated ,screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs Make Cera – Cat No. F2006101 or Equivalent

S&F Stop valves 15 mm dia, fancy type chromium plated, screwed down, high pressure, screwed both ends for 15mm dia pipe or for unions fixed in repairs

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.

CP hand Health faucet of brass body with wall hook and 1mtr stainless steel braided rubber hose pipe fixed in repair complete all as specified and as directed.Make: Cera Cat No F8030102 or equivalent in Hindware / Parryware.

S&F in repairs stainless steel soap dish (heavy duty) of size 200x100 mm fixed to plugs with brass chromium plated screws complete all as specified and as directed

S&F 20mm dia towel rail chromium plated 60cm long including bracket

S&F in repairs drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28 mm including decorative finals of steel powdercoated in matching colour of drapery rod all as directed by Engr-In-charge.

Taking up or down steel tubing 25mm and connection, including cleaning for refixing or removal to store complete all as specified.

Taking up or down steel tubing 20mm and connection, including cleaning for refixing or removal to store complete all as specified.

S&F CPVC pipes, SDR 11, 25 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure

S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure

Dismantling PVC water tanks capacity Exc 500 & n exc 1000 and removing to store

S&F Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) 500 ltrs capacity hoisted and fixed in position all as specified

S&F Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) 1000 ltrs capacity hoisted and fixed in position all as specified

S&F ball or float valve 20 mm brass high pressure with polythene float and fly nut etc complete fixed in repairs.

S&F gunmetal gate valves 25mm bore with iron wheel head ,screwd both ends for iron pipe fixed in repair

S&F in repairs High density polythylene (HDPE) pipes 50 mm dia, of pressure rating 6 Kg/sq cm, fixed to walls, ceilings or in floors complete all as specified and as directed.

Cement concrete type C-2, 1:3:6 (40 mm graded aggregate 75 mm thick as as in plinth protection complete all as specified.

M&L cement concrete 1;4:8 type D2 (40mm aggregate) 75 mm thick as in sub base

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With grey cement and pigment over and including 20mm thick screed bedding layer of CM 1:6 complete

M&L for filleting section of fillet exc 25 but n.exc 50 sq cm in cement mortar 1;3 in any shape in cement mortar.

Preparing new steel Surfaces of any des-cription, over 10cm in width or grith, not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer

M&L for Preparing newly plastered surface and primng with alkali resistant priming paint and applying 2 coats of oil bound distemper on walls over 3 mm thk wall care putty

M&L for Preparing newly plastered surface and primng with alkali resistant priming paint and applying 2 coats of antifungal weather proof paint exterior grade emulsion paint complete all as specified and as directed.

M&L for complete removal of existing treatment of old painted wall surfaces and applying two coats of oil bound distemper over a coat of primer over and including 3mm thick wall care putty of approved make & shade on walls and other places complete all as specified and as directed.

M&L for complete removal of existing treatment of old painted wall surfaces and applying two coats of exterior grade weather resistant, antifungal acrylic latex paint on walls over a coat of primer complete all as specified and as directed.

Preparation of old timber surface of girth exceeding 10cm and applying two coats of synthetic enamel paint complete

M&L for PCC 1:2:4 type B0 (12.5mm graded agg) as in roof kerbs coving over chajjas and similar locations rounded or chamfered on edges.

Removing building materials such a sbricks ,stones, sand etc to a distance upto 15 Km , beyond the lead included in the rates, including loading, unloading and stacking at the destination

Excavation in trenches n.exc 1.5m wide n.exc 1.5m deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5m depth and getting out in soft/loose soil

Excavating in trenches, exc 1.5m and n exc 3 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out in soft/loose soil

Returning, filling including spreading levelling, watering and well ramming in layers n.exc 25 cm using soils levelling, watering and well ramming in layers n.exc 25 cm using soils

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point.

Demolition of Reinforced Concrete n exc 15 cm thickness (below or above ground level)

Dismantling Cast iron or reinforcement concrete drain pipe joint in cement mortar and taking out of trenches 150 mm dia

Dismantling Cast iron or reinforcement concrete drain pipe joint in cement mortar and taking out of trenches 200 mm dia

Dismanting cast iron work of any description

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete.

M&L for Brickwork with sub class B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 in narrow widths including Cutting out bricks/stone, forming toothing for, and bonding new into old brickwork /stone masonry

M&L Rendering 10mm thick in CM 1:6 on concrete surfaces (External surface of manhole) and finished even and smooth without using extra cement complete all as specified

M&L rendering 15mm thick in CM (1:4) on fair face of brick/concrete surfaces on (internal surface of manhole) and finished even and smooth without using extra cement complete with WPC ( wpc measured and paid seperately)

Supply only Water proofing compound

M&L for Pre-cast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in manholes cover slabs with plain fair faces including necessary form work (Reinforcement shall be measured & paid separately).

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping of manhole including weathering, slightly rounded or chamfered angles and throating including necessary form work .

M&L for PCC 1:2:4 type B1,(using 20mm graded stone aggregate) in surface channel and drains (benching of Man holes).

S&F Mild steel TMT bars 10mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to

S&F Cast iron work grade FG 150, unmachineed, in brackets, gully traps, gratings, railings, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc 5 kg each

M&L for Concrete bed to drain pipes including forming cradles in PCC (1:4:8) type D2 (using 40 mm gradded stone aggregate) for 150 mm dia pipe complete all as specified and as directed

M&L for Concrete bed to drain pipes including forming cradles in PCC (1:4:8) type D2 (using 40 mm gradded stone aggregate) for 200 mm dia pipe complete all as specified and as directed

S&F Reinforced concrete pipes, class NP2, laid and jointed complete with collars 150 mm dia laid in trenches and jointed as specified

S&F Reinforced concrete pipes, class NP2, laid and jointed complete with collars 200 mm dia laid in trenches and jointed as specified

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,(fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for issue under Schedule of credit and making good disturbed surfaces of walls, floors, etc.

Taking down MCB DBs / SFUs

M & L for point wiring with 1.5 sq mm single core PVC insulated cable 1100 V grade with multistranded copper conductor drawn through PVC casing and capping with all accessories fixed to wall /roofs ceiling etc and incl provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly incl fabricated steel terminal box made out of 1.6 mm thick MS sheet concealed in the wall with 3 mm thick laminated sheet top cover / PVC Switch Board mounted on wall for mounting the switches , socket outlets , fan regulators etc all as s specified and directed for One light/Fan point controlled by one switch.

All as per item No.115 above but for one switch socket 3 pin outlet 5 amp on independent board.

All as per item No.115 above but for one 3 pin socket outlet 5 amp on the same board board with other switches.

All as per item No.115 above but for one bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 sq mm size.

All as per item no 115 above but with copper conductor cable for one 3 pin socket outlet 15 amp independent board with cable 2.5 sq mm.

S&F in repairs switch piano flush type single pole one way 5 amp.

S&F in repairs ceiling rose three terminal/PVC polycarbonate, isolated body complete all as specified.

S&F in repairs switch socket combination 2 in 1, 3 pin 5/15 amp flush type. .

S&F in repairs switch socket combination 2 in 1,5 amp flush type.

S&F in repairs socket outlet 2 in 1, 3/5 pin 5 amp multi purpose, flush type.

S&F in repairs switch bell push, flush type 5 Amp.

S&F in repairs bell, electronic type AC, 230 Volts single pole.

S&F in repairs fan regulator flush type complete all as directed by EIC at site

M&L for replacement of lamp holder, insulated body with back plate batten/angle type for batten fitting complete all as specified & directed.

Supply and fix new adore LED lamp 15 Watt confirming to Cat No LHLDERUEMD8X015 of Havell's or euivalent in Philips / Bajaj

S&F in repairs LED Tube light 18 Watt LED complete set prewired upto terminal block complete with all accessories and connecting up with twin core / .0076 flexible copper wire with and including LED tube light fixed on two nos PVC round / square mounting blocks complete all as required at site and as directed by Engineer -in-Charge. Make : Cat No for Batten-BLRB DB 118, and for LED Tube Rod Cat No BLRB 18W CW LED of Bajaj or equivalent of Havell's/Philips / Wipro

Supply & fix in repairs 45 W pressure die cast aluminium housing LED Building light secondary optics IP 66 protection including connection with two core twisted copper flexible cable, Make - Bajaj, Cat No - BRTFG 45W LED WW or equivalent make of Havells /Philips/CG

Supply and fix in replacement of LED Tube light of 10 watt (2") with batten integrated channel complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.Make:Bajaj CAT Part No BCLSB 10 NW (2ft) or equivalent to CG/Philips/Wipro complete all as specified and directed .

Supply and fix in replacement of LED recess mounted 2x2 luminaire deep drawn CRCA aluminium housing with high power LED . seamless front frame with flat white high transmission acrylic cover complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.Make:Bajaj CAT Part No BZRSQL GX 34W CW or equivalent to CG/Philips/Wipro complete all as specified and directed .

Supply and fix in replacement of LED surface mounted 2x2 luminaire housing with high power LED complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.Make:Bajaj CAT Part No BZSSQL 36W LED WH or equivalent to CG/Philips/Wipro complete all as specified and directed .

S&F in replacement vertical type DB , (VTPN) suitable for and including MCCB 4 pole, 125 amps, 16KA as incoming (compact) Earth and neutral bus bar of capacity upto 200 amp 4 ways,IP 43 protection , shrouded neutral bar & pan assembly with flexible connecting link in the wall with suitable nut and bolt including matching the existing surface all as specified and directed ,

S&F in replacemen MCB DB SPN 4 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface all as specified and directed

S&F in replacemen MCB DB SPN 8 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface all as specified and directed

S&F in repairs MCB DB SPN 12 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface all as specified and directed

S&F in repairs MCB SPN 35-63 amps, 240 Volts, Complete all as specified and directed.

S&F in repairs MCB SP 6 to 32 amps single pole 240 Volts, Complete all as specified and directed.

S&F in repairs Isolator FP 63 Amps 415 V , with adjustable thermal and adjustable magnetic release,Make- Indoasian,Cat No-811561 or equivalent to Havells/Legrand Complete all as specified and as directed.

S&F in repairs MCB/MCCB Enclosure 3/4 (Way)Mod Metal. Make- Indoasian Cat Part No- 811981/811982, or equivalent to Havells/Legrand Complete all as specified and as directed.

Taking down sub main wiring of any size from the ceiling, walls etc and incl making good to disturb surface of wall and match with the existing surface.

M&L for sub main wiring drawing through PVC casing and capping with two single core 4 sq mm and one run of 4 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade all as directed. Note:- Three run of 4 sqmm wire and One run of PVC casing caping will be measured as one running meter.

M&L for sub main wiring drawing through PVC casing and capping with four runs of single core 6 sq mm and two runs of 6.0 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade all as directed.Note:- Two run of 6 sqmm wire and One run of 4 sqmm wire and One run of PVC casing caping will be measured as one running meter.

Supply and fix in repairs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating upto 06 -32 Apms

M&L for earthling complete with galvanized GI earth plate electrode of size 600x600x6.00 mm, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of volts, nuts, check nut and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate No 3 of SSR Part I 2009,20 mm dia watering pipe medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board (NOTE:- maximum length of GI protection pipe with each earth shall not be less than 7.5 mtrs) including necessary pit with cover , including testing on complition.

M&L for making hole in wall of size 300 mm dia to 450 mm dia for mounting of exhaust fan, making good the disturbed surfaces to match the existing complete all as directed by Engineer-in-Charge at site

Supply & fix fans ceiling complete with accessories 230 V,1200 mm sweep. BEE 5 star rated including taking down old u/s ceiling fan and deposited to MES store complete all as specified and as directed.

Supply & fix exhaust fans metal body complete with and accessories 230 V,300 mm sweep including taking down old u/s exhaust fan and deposited to MES store complete all as specified and as directed.

Supply & fix Air Circulator fans 230 volts single phase oscillating upto 450 mm sweep suitable for wall mounting complete all as specified and as directed.

Renewal/ Repairs to LT Panel Board of any size complete as mentioned below:- Renewal/ Repairs to LT Panel Board of any size complete as mentioned below:- (I) Repair/ replacement of damaged hinges of each compartment (ii) Taking down existing bus bars cleaning with CTC applying with becktol red solution, providing bus bar insulation and refixing with new nuts, bolts, washers etc., (iii) Replacement of damaged copper flexible cable and fixing new copper flexible cable of suitable size for incoming and out going connections of each MCCB terminals to bus bars (iv) Replacement of damaged/ worn out/ loose connections/ cable lugs for incoming & outgoing cables (v) Replacement of u/s CT's, ammeters, Volt meters, Indication Lamps (01 Set each) including provision of new wiring for the same. Note : Ammeters and CT's shall be wired with 2.5 sqmm copper wire . (vi) Replacement of neoprene gasket for all doors of panel board. Note : i) Cost for replacement of spares are deemed to be included in the quoted rates. ii) The rate shall be deemed to be included for replacement of worn out rusted, Channels, hinges, bolts, split pins and cable lugs, cable glands and neoprene gasket with painting to all doors including raising of foundation to 0.3 M height etc., iii) Cost of replacement of MCCB's, Repairs to ACB's not included in the scope of work.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric poer cables (heavy duty) 1100 volt grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed

Excavation in trenches n. exc. 1.5 M in width and 1.5 M in deep for laying of pipes and getting out in Soft / loose Soil

All As per Sl Item No 39 Herein before but in hard dense soil

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm.

Removing excavated material n. exc. 50 M away and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and as directed.

M&L for providing dry river sand / crush stone dust for cushioning to UG cable including punning down of sand in layers all as specified. Note :- Cushioning will be measured and paid after punning down.

Supply and laying factory cast, unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 flat size 250x150x40 mm laid in trenches as specified and as directed.

RK AND SONS CREATION