Khari_Menda R.D Road to Malisirigidi_Road_Pot Holes repair, Bush cutting, Road signage_ 0.000 to 2.850

Clearing and grubbing road land including uptooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposalof top organic soil not exceeding 150 mm in thickness.

Providin, laying, spreading & compacting graded stone aggregate to to Wet Mix Macadam specification including pre mixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface & compacting with vibratory roller to acieve the desired density as per clause 406 of MoSRT&H specifications for road & bridge works.

Cleaning the existing black topped surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous treatment.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per Clause 502 of MoSRT&H Specifications for Road & Bridge works.

Providing & applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg/sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MoSRT&H Specifications for Road & Bridge works

Labour for laying 20mm thick premix carpet using 0.23cum of 13.2mm to 5.6mm size crushed stone chipping and 14.60kg penetration grade of bitumen for 10sqm including hand packing to proper camber & consolidation with PRR including hire & running charges of PRR, hot mix plant, bitumen boilers & all other T & P articles but excluding cost & conveyance of chips & bitumen complete as per specification & direction of the Engineer-in-charge.

Labour for laying 6mm thick precoated seal coat Type-B using 0.06 cum of 6.7mm size and down graded chips as per sieve analysis and 6.8Kg of bitumen per 10sqm.including hire and running charges of PRR, hot mix plant, tar boiler and all other T&P articles but excluding cost and conveyance of chips and bitumen complete as per specification & direction of the Engineer-in-charge.

Providing for laying sub-base in layers not exceeding 100 mm watering and compacting to the required density in O.M.C with PRR but excluding cost and conveyance of sub base materilas.