Balance work estimate for the Extention and C/O Bus Stand at Killar (SH Providing and Fixing Railing work etc)

Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded stone aggregate 20mm(Twenty milimetre) nominal size including mechanically mixing and vibrating (M-20 Grade) excluding the cost of form work and reinforcement RCC work in:-Suspended floors roofs, landings, shelves and their supports balconies girders bressumers and cantilever as per HPPWD specifications,approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Steel work Welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint in trusses and trussed purlins in building, as per specification, approved drawing, design, to the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing coloured coated / anodised aluminium work for frame of doors, windows, ventilators and glazed partitions of Jindal/Hindalco aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera (Section No. 14081, 4524 and 4526 of Jindal / Hindalco etcetera). Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing coloured coated/ anodised aluminium work for shutter doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required diametre and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.