PROVISION OF BALANCE OTM ACCN FOR WORKSHOP AT AURANGABAD

Amount

SCH 'A' PART-I: BUILDING/STRUCTURES Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only

Construction of Block of single accn for Hav/ORs (63 Nos of ORs) including Cook house and dining hall complete all as shown in drawings and as specified.

Construction of Block of Garages with 3.20m height (for 10 Nos vehicles) including Apron complete all as shown in drawings and as specified.

Construction of Block of Garages with 3.80m height (for 03 Nos vehicles) including Apron complete all as shown in drawings and as specified.

Construction of Block of Garages with 4.50m height (for 11 Nos vehicles) including Apron complete all as shown in drawings and as specified.

Construction of Block of Garages with 4.50m height (for 05 Nos vehicles) including Apron complete all as shown in drawings and as specified.

Construction of Block of MT store, Petrol store, Lub and Oil Store complete all as shown in drawings and as specified.

Construction of Block of Repair bay with Inspection pit complete all as shown in drawings and as specified.

Construction of Block of Guard room, Armories and SAA Stores complete all as shown in drawings and as specified.

Construction of Block of Administrative building complete all as shown in drawings and as specified.

Construction of Block of Covered Car parking (for 05 cars) including ramp complete all as shown in drawings and as specified.

Construction of Block of Parking for 10 Scooters and 30 Motor Cycles including ramps complete all as shown in drawings and as specified.

Construction of Block of Drying and Ironing shed complete all as shown in drawings and as specified.

Construction of Block of Armament Shop complete all as shown in drawings and as specified. Note: RCC brackets and Gantry girders shall be provided as per details mentioned in structural drawings. However Crane girder and rails on the Gantry girder shall be out side the scope of above building.

Construction of Block of Specialist Shops complete all as shown in drawings and as specified.

Construction of Block of Ancillary Shops complete all as shown in drawings and as specified.

Construction of Block of Battery Charging Shop complete all as shown in drawings and as specified.

Construction of Block of Tradesmen/Unit Shop complete all as shown in drawings and as specified.

Construction of Block of Storage accn complete all as shown in drawings and as specified.

Construction of Washing Platform (for three vehicles) complete all as shown in drawing No. CEPZ/2023/A'BAD/01 (T) Sheet 1/1 and as specified.

Construction of Washing Platform (for one vehicle) complete all as shown in drawing No. CEPZ/2023/A'BAD/01 (T) Sheet 1/1 and as specified.

Construction of Alarm Post complete all as shown in drawing No. CEPZ/2021/TD/03 Sheet1/1 and as specified.

Construction of Ramp (Single) complete all as shown in drawing No. CEPZ/2021/TD/03 Sheet1/1 and as specified.

Construction of Sentry Box Type 'A' complete all as shown in drawing No. CEPZ/91/TD/21M sheet 1/1 and as specified.

Construction of Fire Point complete all as shown in drawing No. CEPZ/94/TD/42 sheet 1/1 and as specified.

Construction of Static Water tank of 50000 Litre capacity complete all as shown in drawing No. CEPZ/2023/A’BAD/ 01/STR sheet 38A/38 and as specified.

Total amount of Sch 'A' Part-II (Internal Water Supply)

Total amount of Sch 'A' Part-III (Internal Electrification)

Total amount of Sch 'A' Part-IV (Road, Path, Hard Standing and Culvert)

Total amount of Sch 'A' Part-V (Area Drainage)

Total amount of Sch 'A' Part-VI (Sewage Disposal)

Total amount of Sch 'A' Part-VII (Compound wall, Fencing and Gate)

Total amount of Sch 'A' Part-VIII (Solar Hot Water System)

Total amount of Sch 'A' Part-IX (External Water Supply)

Total amount of Sch 'A' Part-X (External Electic Supply)

Total amount of Sch 'A' Part-XI (Site Clearance, Excavation and Earthwork)

Total amount of Sch 'A' Part-XII (Dismantling / Demolition)

NOTE: Schedule ‘A’ Part II to XII items which are not Prepriced by MES are given in Sch 'A' Part-XII, Bidders shall insert their rate in Column-6 only and the Estimated rate indicated as "0.0" are for that purpose.

SCHEDULE 'A' PART-XIII (MISC B/R AND E/M WORKS)

Supplying, installing, connecting, testing and commissioning Refrigerator electric driven (Single Phase) of capacity 200 litres or nearest available capacity, 220 volts, 50 Hz, BEE 5 Star rated based on eco friendly gas R-134A including connecting lead and suitable 3 pin plug top complete all as specified and directed. (Makes: Blue Star / LG / Voltas / Godrej).

Supplying, installing, connecting, testing and commissioning Storage Water Cooler 80 litre capacity and cooling capacity 40 litres per hour, based on eco friendly gas R-134A including extending the drain out pipe to the nearest drain system, including connecting lead and suitable 3 pin plug top complete all as specified and directed. (Makes: Blue Star / Usha / Voltas).

Supplying, installing, connecting, testing and commissioning Storage Water Cooler 40 litre capacity and cooling capacity 40 litres per hour, based on eco friendly gas R-134A including extending the drain out pipe to the nearest drain system, including connecting lead and suitable 3 pin plug top complete all as specified and directed. (Makes: Blue Star / Usha / Voltas).

Supplying, installing, connecting, testing and commissioning Hi wall Split AC unit indoor / outdoor, electric driven of capacity 1.50 TR, 220 volts, 50 Hz, complete with cordless remote control unit and built in air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 based on and including eco friendly gas R-134A including connecting lead and suitable 3 pin plug top complete all as specified and directed. Makes as per Appendix 'C'.

Supplying, installing, connecting, testing and commissioning Hi wall Split AC unit indoor / outdoor, electric driven of capacity 2.00 TR, 220 volts, 50 Hz, complete with cordless remote control unit and built in air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 based on and including eco friendly gas R-134A including connecting lead and suitable 3 pin plug top complete all as specified and directed. Makes as per Appendix 'C'.

S&F Voltage stabilizer wall mounted type for automatic operation single phase naturally air cooled indoor type and design for input variation between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of ± 2.5 % of capacity 4.00 KVA including all fixing arrangement complete all as specified and directed.

S&F Voltage stabilizer wall mounted type for automatic operation single phase naturally air cooled indoor type and design for input variation between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of ± 2.5 % of capacity 5.00 KVA including all fixing arrangement complete all as specified and directed.

S & F lamp holder angle / batten type, PVC / polycarbonate type with back plate suitable for and including inverter type LED bulb 12 W, 6500K with backup time up to 04 hrs, pin type complete all as specified and directed. Makes: Havells Cat part No. LHLDDOBAIA2 RO12 or equivalent in makes specified in Appendix 'C'.

Supply and Fix 20 watt LED tube light fitting, 4 feet long, with polycarbonate housing LED lighting fixture with high lumen output, environmental friendly, energy efficient CRI-6500K, PF not less than 0.95, fixed on PVC square for mounting the fittings and electrically connecting with three single core 23/0.0076 PVC insulated multi standard copper flexible cable from ceiling rose to light fitting (connector of lamp fitting) and one for earthing complete all as specified and directed. Make : Havells Cat No LHEXBLP7PN1W020 / Benlo Cat No BLO4BAT20WT5/ Halonix Cat No HLB-08-20-CW-IP/Wipro Cat NoLL20-221-XXX-65 NE3

Supply and fix surface mounted 9/10 watts LED tube light fitting with polycarbonate housing square batten LED lighting fixture with high lumen output, environmental friendly, energy efficient fixed on PVC square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi standard copper flexible cable from ceiling rose to light fitting (connector of lamp fitting) and one for earthing complete all as specified and directed. Make: Havells Cat No LHEXBLP7IN1W009 / Benlo Cat No BLO4BAT 10WT5 / Halonix Cat No HLB-07-10-CW-IP / Wipro Cat No LL20-111-XXX-65 NE3

S&F MCB DB VTPN 4 way double door load line powder coated IP 43 Protection with provision for 4 Pole MCCB as incomer and SP/TP MCBS as outgoings complete provided with insulated vertical phase bus-bars neutral bars with shrouds, earth bars, sticking saddles, cement spill protector, colour coded interconnecting wire set, cable ties, blanking plates and circuit identification labels. fixed in wall and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

Supply and fixing Ceiling fan complete with fan blades, down rods. electronic regulator and accessories, 230 Volts 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) and including Fan step regulator, 120W - 2 module, complete all as specified and directed.

Supply and fixing Ceiling fan complete with fan blades, down rods. electronic regulator and accessories, 230 Volts 1400 mm sweep, minimum air delivery 245 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) and including Fan step regulator, 120W - 2 module, complete all as specified and directed.

Supply and fix Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm and with suitable 3 pin plug top complete all as specified and directed.

Supply and fix Exhaust fan, steel body, AC single Phase. 230V of size 300mm sweep with blades and frame and louvers and with suitable 3 pin plug top complete all as specified and directed.

Supply and fixing Air Circulator wall mounted type single phase 3 blade oscillating type of 600 mm sweep with speed adjustment arrangement including suitable 3 pin plug top complete all as specified and directed.

Supply and fixing Desert Cooler electric driven floor mounted type, single phase 3 blade, having normal air flow capacity of 1000 CFM per hour (or nearest capacity) of plastic / PVC body and with suitable 3 pin plug top complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Makes :- BENLO Cat Part No. BL04BAT10WTS / WIPRO Cat Part No. LL20-111-XXX-65NE3 / Havells Cat Part No LHEBLP7INW009

Supply and fixing High bay LED light fitting 150 Watt, saucer round type, energy saving and robust high out put diffuser 220 V AC decorative type suspended with suitable mechanism as per manufacturers recommendations with and including LED lamp, connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Havells Cat No RADIOSOHB150WLED75760DBOPC or equivalent in other makes as per Appendix 'C'

S&F LED lights fitting 600 mm x 600 mm, 36 W, 220V, AC, surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and including LED lamp suitable for roof ceiling including connecting up with driver, holders and LED lamp suitable size complete all as specified and directed. Make : Bajaj Cat No BZSSQL36WLEDWH or equivalent in other makes as per Appendix 'C'

S&F LED light fitting, out door building security light of 45 Watt 240 Volts with high pressure die cast aluminium housing and heat resistant cover with driver, lamp bracket, impact and corrosion resistance including thermal management in multiple optics complete with IP 65/ 66 protection including 45 W LED lamp having output efficiency minimum 100 lumens per watt and bracket made of 40 mm dia GI tube light grade of 1.20 m length, bent to shape required including 2 Nos of flat iron brackets duly welded with nuts, bolts and washers etc., including electric connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Makes :- BENLO Cat Part No. BL18SL45W(UST) / HALONIX Cat Part No. HLSLD-01-45-CWL-R / Havells Cat Part No. ENDURAPEARLNEPS245W LED757PASYTOPC

S&F DN 100 mm dia ductile iron pipe with spigot and socket ends, centrifugally cast, class DI-K7, cement mortar lining with Portland slag cement as per IS-455: 1989, metallic zinc coating as per Annex 'A' of IS-8329 with finishing layer of bituminous coating as per Annex 'C' of IS-8329 with suitable rubber gasket joint, confirming to IS-8329: 2000, ISI marked, in any length, laid in trenches in proper alignment, pressure testing, washing out complete all as specified and directed.

S&F Cast iron / Ductile iron fittings and specials such as Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, connecting pieces one end flanged and the other socketed or spigot ends or all socketed/ spigot end, suitable for pipes 100 mm dia / bore complete all as specified and directed.

M&L Construction of Fly ash bricks masonry Valve pit chamber of size 0.90 x 0.90 x 0.90 mtr (depth) internal dimensions with 15 cm thick foundation using PCC 1:4:8 type D-2 over 15cm thick hard core, 23 cm thick fly ash brick wall built in cement and sand mortar 1:4, 15mm thick internal plaster including 50 mm thick PCC 1:3:6 bedding, 3mm thick MS sheet cover with 40mm x 40mm x6mm MS angle iron frame fixed in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) coping with 25mm x 6mm flat iron hold fast with handle and locking arrangement including necessary painting steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer, excavation, earth work, returning & filling in type of soil and disposal of surplus soil at a distance of not exc. 50 m, complete all as specified.

M&L Excavation along CI pipe line of dia upto 100mm (main line), cutting the pipe line and making new connection with 100 mm dia DI pipe and refixing the same with proper lead joint and lead wool including necessary returning, filling and well ramming of soil in layers n. exc 25 cm each, complete all as directed.

S&F Mechanical Joint with 2 Nos CI / DI sockets, 1 No CI / DI collar and 2 Nos Sturene Butadiene rubber gasket along with nuts, bolts and washers including CI / DI pipe for insertion of mechanical joint in position upto 100 mm dia bore pipe complete all as specified and directed.

Supply & Fix Sluice valve long body with both flanged end, cast iron body, 100 mm bore as per IS- 14846 and drilled with stainless steel Spindle, iron wheel head and as per pressure rating PN 1.60 Class-I, ISI marked including all joints with rubber or fibre board, bolts nuts and washers with stainless steel wedge nut and spindle, and fixed in position complete all as specified and directed.

S&F LED Street light fitting 45 watt 230 Volt AC outdoor type with high pressure die cast aluminium housing and heat resistance cover complete with driver, lamp bracket with impact and corrosion resistance including thermal management in multiple optics complete with IP 65/66 protection, all accessories including providing and connection with and including copper conductor flexible cord of suitable cross sectional area of required length from ceiling rose to connector block of fitting complete including testing on completion all as specified and directed. Makes :- Havells Cat part No. ENDURAPEARL NEO SL45WLED757 PASYTOPC or equivalent in other makes specified in Appendix 'C'.

S&F FRP street light junction box, light weight low corrosive, suitable for pole mounting of size 250 x 200 x 100 mm, top hinged or equivalent with and including MCB SP 6 Amp 'C' curve mounted on din rail inside the box and connecting terminal 4 way, fixed on steel street light pole with and including MS nuts bolt and MS clamps -1 No of size 40 mm x 4 mm thick, complete all as specified and directed.

S & F Street light brackets made out of 40 mm dia GI light grade pipe duly bend by hot forging after filling of sand of length 1.20 metre including two pairs of MS flat iron strip 40 mm x 3 mm clamp of suitable size with necessary GI nuts, bolts 75 mm long 12 mm dia - 02 Nos with flat washers 3 mm thick - 2 Nos including painting with aluminium paint over one coat of red oxide primer to the MS claps and bracket etc. complete and fixing on walls / poles complete all as specified and directed.

Supply and fixing RCC cable route indicator of height 800mm, width 300mm, thickness 120mm with 8mm dia TMT reinforcement bars with top circular section of radius 175mm fixed in PCC(1:4:8), D2 type with letters engraved 'MES, 11KV HT Cable' complete as per drawing No. CEPZ/2023/TD/01 Sheet 1/1 all as specified and as directed.

S&F PVC 3 core copper wire flexible type of size 1.50 sq.mm in PVC conduit 20 mm dia for street light connection of length as per site requirement from junction box to street light complete all as specified and directed.

S&F 3M (USA Brand makers) Cat eyes Series 290 (or equivalent model in Siddhi Vinayak Enterprises/ Road Safety Mark/ Dark Eye / Alaxius / 3M/ /Greenlite/ Stimsonite/ Avery). in size width not exceeding 20 mm made of strong engineering polymer / thermoplastic with reflective lenses on both sides operative in dry and wet weather conditions and grouting with bituminous hot adhesive complete all as specified and directed (As per ASTM 4280 / MORTH standards), complete all as specified and directed.

S&F ABS reflective delineator of size 700 mm x 50 mm x 100 mm made of ABS material round body fitted with two number 100 mm dia highly reflective reflectors made of PMMA material and mounted on MS pipe of 50 mm duly powder coated, anti rust & anti theft steel net. fixed etc. complete all as specified and directed. Makes: Siddhi Vinayak Enterprises/ Road Safety Mark/ Dark Eye / Alaxius / 3M/ /Greenlite.

Supply, installation ,testing and commissioning of LT panel Outdoor type factory fabricated front openable with locking arrangements compartmental type made out of 3.15 mm thick CRCA sheet epoxy painted and two coats of synthetic enamel Paint over a coat of red oxide, of size 750 mm x 600mmx 550mm complete mounted on and including MS angle Iron frame made out of 40x6 mm thick of suitable size painted with black synthetic enamel paint over a coat of red oxide primer embedded in PCC (1:2:4) type B-1 in foundation up to the depth of 200 mm and 100 mm above ground level with suitable size & No of Cable glands and including necessary cable connection excavation and earth work suitable for housing and including the following accessories::-

(i) MCCB 160 Amp 4 pole 25 KA with overload & thermal release setting -01 No

(ii) MCCB 100 Amps 25 KA 4 Pole with overload & thermal release setting -03 Nos

(iii) MCCB 63 Amps 25 KA 4 Pole with overload & thermal release setting - 01 No

(iv) MCCB 40 Amps 25 KA 4 Pole with overload & thermal release setting -01 No

(v) MCCB 32 Amps 25 KA 4 Pole with overload & thermal release setting -03 Nos

(vi) Copper bus bar 300 Amp with 4 Strips of suitable size-01 Set

(vii) Astronomical time switch three phase 415 V suitable for Indian Region longitude/latitude with 3 pole ML-2 pole contractor suitable for 60 Amp complete with all accessories -01 Nos

(viii) LED type indicator lamp -01 Set of 03 Nos

(ix) Multifunctional Energy meter (Voltage, Amp & frequency)

Supply, installation ,testing and commissioning of LT panel Outdoor type factory fabricated front openable with locking arrangements compartmental type made out of 3.15 mm thick CRCA sheet epoxy painted and two coats of synthetic enamel Paint over a coat of red oxide, of suitable size complete mounted on and including MS angle Iron frame made out of 40x6 mm thick of suitable size painted with black synthetic enamel paint over a coat of red oxide primer embedded in PCC (1:2:4) type B-1 in foundation up to the depth of 300 mm and 150 mm above ground level with suitable size & No of Cable glands and including necessary cable connection excavation and earth work suitable for housing and including the following accessories::-

(I) MCCB 100 Amp 4 pole 35/36 KA with overload & thermal release setting -01 No (Incoming)

(ii) MCCB 40 Amps 25 KA 4 Pole with overload & thermal release setting -01 No (Outgoing)

(iii) MCCB 32 Amps 25 KA 4 Pole with overload & thermal release setting - 04 Nos (Outgoing)

(iv) MCCB 20 Amps 16 KA 230 Volt 50 Hz- 03 Nos (Outgoing)

(v) Copper bus bar 250 Amp with 4 Strips of suitable size-01 Set

(vi) LED type indicator lamp -01 Set of 03 Nos

(vii) Multifunctional Energy meter (Voltage, Amp & frequency)

Supply, installation ,testing and commissioning of LT panel Outdoor type factory fabricated front openable with locking arrangements compartmental type made out of 3.15 mm thick CRCA sheet epoxy painted and two coats of synthetic enamel Paint over a coat of red oxide, of suitable size complete mounted on and including MS angle Iron frame made out of 40x6 mm thick of suitable size painted with black synthetic enamel paint over a coat of red oxide primer embedded in PCC (1:2:4) type B-1 in foundation up to the depth of 300 mm and 150 mm above ground level with suitable size & No of Cable glands and including necessary cable connection excavation and earth work suitable for housing and including the following accessories::-

(i) MCCB 100 Amp 4 pole 35/36 KA with overload & thermal release setting -01 No (Incoming)

(ii) MCCB 40 Amps 25 KA 4 Pole with overload & thermal release setting -01 No (Outgoing)

(iii) MCCB 32 Amps 25 KA 4 Pole with overload & thermal release setting - 01 Nos (Outgoing)

(iv) MCCB 20 Amps 16 KA 230 Volt 50 Hz- 03 Nos (Outgoing)

(v) Copper bus bar 250 Amp with 4 Strips of suitable size-01 Set

(vi) LED type indicator lamp -01 Nos

(vii) Multifunctional Energy meter (Voltage, Amp & frequency)

Supply, installation ,testing and commissioning wall mounted LT feeder pillar box, double door, Outdoor type, factory fabricated, front openable with locking arrangements compartmental type made out of 3.15 mm thick CRCA sheet epoxy painted and two coats of synthetic enamel Paint over a coat of red oxide, of suitable size complete with suitable size & No of Cable glands and necessary cable connection suitable for housing and including the following accessories::-

(i) MCCB 16 Amp 4 pole 16 KA -01 No (Incoming)

(ii) MCB DP 10 Amps 10 KA -04 Nos (Outgoing)

(iii) Copper bus bar 160 Amps with 4 Strips of suitable size- 01 Set

(iv) LED type indicator lamp -01 Set of 03 Nos

NOTES:

(a) Panel shall be manufactured by the reputed manufacturer who is possession of type test certificate by CPRI not older than ten years.

(b) Rate quoted shall be inclusive of complete excavation and earthwork in any kind of soil, PCC works as required as per site requirement.

Supply, installation, testing and commissioning of electrically operated, overhead travelling EOT crane of capacity 5 Ton, conforming to IS: 3177 (latest revision), with span 15.0 mtr long(approx), height of lift 10 mtr (approx), travel length 25 mtr (approx), suitable for operation on 415 Volts, 3 Phase, 4 wires, 50 HZ supply, double girder box type, with necessary steel supporting structures with hoist speed 5.0 metres per min, cross travel speed 10 metres per min, long travel speed 10 metres per min with micro speeds (10-20% of normal speed) through WVF drives of suitable capacities with control panel, power and controlling cables, confirming to relevant IS, noise level 70 db, controlled by pendent push button station with and including of dia steel rope of suitable dia 4 Falls operation system hoist/ cross travel/ long travel / electrically operated with pendent. Festoon System, with the following design details, specifications & as per building drawing:- Makes/ Manufacturer's of Crane: Safex Energy Pvt Ltd./ Pioneer Cranes & Elevators Pvt Ltd. / Hercules Hoists Ltd.

(A) Services & class will be indoor and class II operations through pendant push button from floor.

(B) Brakes: EM type for CT/LT motions.

(C) Hoisting-Thrusters type.

(D) Wheels: EN-8 or forged steel material.

(E) Electric Motors: For Hoisting, Cross travel and longitudinal travel Squirrel cage, Crane duty.

(F) Gear Boxes: Helical type for all motions

(G) Panel Box: Fabricated from MS sheet with all required, controls & limit switches, Relay etc.

(H) Limit Switches: Rotary type for hoisting & lever type for CT & LT.

DESIGN DETAILS :

(i) Girders box type with section fabricated using fresh tested steel obtained directly from Main steel producers (like SAIL, RINL, TATA, Vizag steel, Jindal).

(iv) End carriages with standard wheel bases fabricated using the modern welding and machining techniques to ensure jerk free and smooth travel motion. The wheels shall be double flanged, supported on self aligning anti-friction bearings, Buffers shall be provided at the ends of the carriage as per IS Standards.

(v) Brakes for all drives shall be Electro-Hydraulic Thrusters brakes according to the application.

(vi) Lifting Hooks- Hooks shall be shank type supported on anti friction thrust bearing and the sleeve pulleys shall be made out of malleable cast iron as per IS.

(vii) Controls: The crane shall be controlled by pendant push button type. The main electrical components shall be housed sheet enclosures suitable for indoor application conveniently located for easy maintenance. Standard protection devices for overload protection and short circuit protection shall be provided.

(viii) All other incidental, civil, electric and mechanical works.

NOTES :

(a) The subject crane is meant for the purpose of handling small to medium components of engine assembly.

(b) The crane shall be put to use for 365 days continuous duty with CT, LT and Hoist movements.

(c) The department shall provide suitable rated electric outlet in the Main Electric Control Panel / Main Distribution Board of the building (Refer drawings). All other works, electric earthing and associated incidental and minor works shall be the responsibility of contractor and unit rate quoted is deemed to include for the same.

(d) The details of RCC brackets, end plates etc. are shown in relevant drawings. The contractor shall check and certify that these are sufficient and meets the requirement of his design.

(e) The shop for environment will be dust prone, humid, welding fumes filled and ambient temprature up to 55⁰. Weather condition are tropical. Crane shall be kept in the normal shop floor conditions without any temperature controlled enclosures / shop. Max temperature variations 25⁰ Celsius in 24 hours. Sound level should be minimum and the crane should have decent aesthetic look.

SOOD ASSOCIATES PVT LTD

nhsaluji and associates