SPL REPAIR/ REPLACEMENT OF LT OH CONDUCTOR WITH UG CABLE, REPLACEMENT OF FEEDER PILLAR BOX, REPLACEMENT OF ENERGY SAVING STREET LIGHTS AND CONNECTED ITEMS AT VARIOUS POCKETS OF BABINA CANTT UNDER GE BABINA

Amount

M & L for taking down of unserviceable aluminium conductor steel reinforced (ACSR) of any description /size & in any position from existing HT poles or lines for replacing ACSR conductors with UG/AB cable complete all as specified and as directed.

M & L for taking out of unserviceable insulators of any type and any position from LT poles complete all as specified and as directed.

M & L for taking down of existing unserviceable cross arms, mild steel channel or angle sections etc complete all as specified and as directed.

M & L for taking down of old u/s GI bracket any type any size etc complete all as specified and as directed.

Supply,laying and testing of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 95 sqmm 3.5 core as per IS 7092 Pt-I complete all as specified and as directed. Make :- M/s KEI INDUSTRIES/HAVELLS INDIA LTD/UNIVERSAL CABLES

All as per item No 5 here in above but of size 70 sqmm 3.5 core complete all as specified and as directed.

All as per item No 5 here in above but of size 50 sqmm 3.5 core complete all as specified and as directed.

All as per item No 5 here in above but of size 35 sqmm 3.5 core complete all as specified and as directed.

All as per item No 5 here in above but of size 25 sqmm 4 core complete all as specified and as directed.

All as per item No 5 here in above but of size 16 sqmm 4 core complete all as specified and as directed.

All as per item No 5 here in above but of size 10 sqmm 4 core complete all as specified and as directed.

All as per item No 5 here in above but of size 10 sqmm 2 core complete all as specified and as directed.

Supply, installing, testing and commissioning, factory made and tested ,CPRI type tested LT feeder pillar , outdoor type floor mounted , suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber duly insulated The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and LT panel shall bemounted on angular frame work of 50x50x5mm thick angle iron base frame, minimum 60 cm hight and fixed with PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, both side opening type, with aprons for cable entry, with double door shutter and locking arrangement and consisting of the following all as specified including taking out old feeder pillar and taking out LT cable from loop for connecting in new panel and necessary excavation etc and consisting of the following :- (a) Copper bus bar four Nos 300 Amps each ,fixed on epoxy insulated with panel fixed horizontally, duly insulated with heat shrinkable sleeves in colour code - 04 Nos Incoming:- (b) MCCB, 04 Pole, 200 Amps with ultimate breaking capacity Icu- 35 KA at 415 volts , adjustable type with thermal and magnetic settings conforming to IEC 60947 Part-I/IS-13947 Part-I - 01 No (Ics=Icu=100%) (Make:- Havells/L&T/Indoasian) Outgoing:- (c)Switch disconnector fuse unit (SDFU) 100 Amp TPN SDF suitable for DIN bolted fuse link with HRC fuse of capacity 100 Amp 4 pole type FN 100 FP having catpart no SK90496 of make L&T conforms to IEC 60947-3 Part-IS/IEC-60947-3 Part-I - 02 No, (Make :- L&T/Havells//Indoasian ) (d) Switch disconnector fuse unit (SDFU) 63 Amp TPN SDF suitable for DIN bolted fuse link with HRC fuse of capacity 63 Amp 4 pole type FN 63 FP having catpart no SK90495 of make L&T conforms to IEC 60947-3 Part-IS/IEC-60947-3 Part-I - 02 No, (Make :- L&T/Havells//Indoasian f)Spare way for Switch disconnector fuse unit (SDFU) 125 Amp 4 way - 01 Nos

Supply, installing, testing and commissioning, factory made and tested ,CPRI type tested LT feeder pillar , outdoor type floor mounted , suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber duly insulated The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and LT panel shall bemounted on angular frame work of 50x50x5mm thick angle iron base frame, minimum 60 cm hight and fixed with PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, both side opening type, with aprons for cable entry, with double door shutter and locking arrangement and consisting of the following all as specified including taking out old feeder pillar and taking out LT cable from loop for connecting in new panel and necessary excavation etc and consisting of the following :- (a) Copper bus bar four Nos 600 Amps each ,fixed on epoxy insulated with panel fixed horizontally, duly insulated with heat shrinkable sleeves in colour code - 04 Nos Incoming:- (b) MCCB, 04 Pole, 400 Amps with ultimate breaking capacity Icu- 50 KA at 415 volts , adjustable type with thermal and magnetic settings conforming to IEC 60947 Part-I/IS-13947 Part-I - 01 No (Ics=Icu=100%)(Make :- Havells/L&T/Indoasian) Outgoing:- (c)Switch disconnector fuse unit (SDFU) 125 Amp TPN SDF suitable for DIN bolted fuse link with HRC fuse of capacity 125 Amp 4 pole type FN 125 FP having catpart no SK90496 of make L&T conforms to IEC 60947-3 Part-IS/IEC-60947-3 Part-I - 02 No, (Make :- L&T/Havells//Indoasian ) (d) Switch disconnector fuse unit (SDFU) 100 Amp TPN SDF suitable for DIN bolted fuse link with HRC fuse of capacity 100 Amp 4 pole type FN 100 FP having catpart no SK90495 of make L&T conforms to IEC 60947-3 Part-IS/IEC-60947-3 Part-I - 01 No, (Make :- L&T/Havells//Indoasian (e) Switch disconnector fuse unit (SDFU) 63 Amp TPN SDF suitable for DIN bolted fuse link with HRC fuse of capacity 63 Amp 4 pole type FN 63 FP having catpart no SK90495 of make L&T conforms to IEC 60947-3 Part-IS/IEC-60947-3 Part-I - 01 No, (Make :- L&T/Havells//Indoasian (f)Spare way for Switch disconnector fuse unit (SDFU) 125 Amp 4 way - 01 Nos

Supply, installing, testing and commissioning, factory made and tested ,CPRI type tested LT feeder pillar , outdoor type floor mounted , suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber duly insulated The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and LT panel shall bemounted on angular frame work of 50x50x5mm thick angle iron base frame, minimum 60 cm hight and fixed with PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, both side opening type, with aprons for cable entry, with double door shutter and locking arrangement and consisting of the following all as specified including taking out old feeder pillar and taking out LT cable from loop for connecting in new panel and necessary excavation etc and consisting of the following:- (a) Copper bus bar four Nos 400 Amps each ,fixed on epoxy insulated with panel fixed horizontally, duly insulated with heat shrinkable sleeves in colour code - 04 Nos Incoming:- (b) MCCB, 04 Pole, 250 Amps with ultimate breaking capacity Icu- 35 KA at 415 volts , adjustable type with thermal and magnetic settings conforming to IEC 60947 Part-I/IS-13947 Part-I - 01 No (Ics=Icu=100%) Make :- Havells/L&T/Indoasian) Outgoing:- (c)Switch disconnector fuse unit (SDFU) 125 Amp TPN SDF suitable for DIN bolted fuse link with HRC fuse of capacity 125 Amp 4 pole type FN 125 FP having catpart no SK90496 of make L&T conforms to IEC 60947-3 Part-IS/IEC-60947-3 Part-I - 02 No, (Make :- L&T/Havells//Indoasian ) (d) Switch disconnector fuse unit (SDFU) 100 Amp TPN SDF suitable for DIN bolted fuse link with HRC fuse of capacity 100 Amp 4 pole type FN 100 FP having catpart no SK90495 of make L&T conforms to IEC 60947-3 Part-IS/IEC-60947-3 Part-I - 02 No, Make :- L&T/Havells//Indoasian f)Spare way for Switch disconnector fuse unit (SDFU) 125 Amp 4 way - 01 Nos

S&F for replacement & testing commissioning of outdoor type bus bar panel pedestal type weather proof CPRI approved MS cubical panel board outdoor type of size 110 cm x 80 cm x 40 cm, 4 Nos of bus bar of 300 Amp capacity & MCCB 200 Amp capacity 4 pole (Ics = Icu = 100%) including one coat of red oxide and two coat of enamel paint powder coated, mounted on channels and PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels aluminium busbar chanel insulated with colour coated heat shrinkable sleaves and mounted on DMC/Epoxy insulator complete all as specified and directed. Note :- Contractor will submit GA drawing for approval before placing order. Make: - Shalbh/Mclayers Bhopal/Universal switch gear

S&F cable path indicator made of precast RCC (1:2:4) type B0 using 12.5 mm graded stone aggregate & mild steel TMT bars 10mm dia of size 900mm x 450mm x 50 mm duly enamel painted red/brown colour and marked as HT/LT cable and installed at 600mm above and 300mm below ground level complete all as specified and directed. Note: Cost of excavation, earth work, etc is deemed to be included in the quoted unit rate.

M&L for replacement of new generation energy saving and environmental friendly long life LED street light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 45/48 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including taking down of old unserviceable street light any type/any capacity including replacement of twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from junction box to LED light throgh cpper connectos complete all as specified and directed. Make :- Bajaj/ Havells/philips

Description all as per item No 18 here in above but of capacity 90 Watt complete all as specified and directed.

Supply, erection and fixing in true vertical position new Pre- streessed concrete poles 102 mm x 172 mm at top and 102 mm x 279 mm at bottom 9.0 mtrs long and providing connection including making alternate white and black strips 30 cms height (05 Nos strips) numbering the poles by 2" height letters complete all as specified and directed. Make : Hindustan Pressed concrete Faridabad / M/s Indian PCC poles / M/s Concrete Ugyog Jhansi

S & F of GI brackets for street light fitting fabricated with GI tubing 32 mm dia for LED Street lights medium grade 1.2 mtr length and bending to angle of 120 degree incl mild steel flat iron clamp fabricated with mild steel flat iron 32 x 5 mm with nut, bolt & washers suitable for fixing of GI bracket on existing poles complete all as specified and directed.

M&L for earthing complete including necessary excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead 4.0 mm dia by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.5 of MES SSR Part-1 connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanised iron 40 mm dia. light grade pipe and watering pipe shall be 20 mm ore medium grade PCC pipt with pre cast RCC cover, charcoal/salt funnel etc. complete all as specified and directed. Note : The conctrete pit shall be PCC 1:3:6 type C1, 40 mm thick PCC slab of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No.5 of MES SSR Part-1 (ii) PCC pits shall be provided atleast 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbows etc shall be deemed to included in the quoted rate.

M&L fo replacement of double pole Kit kat type rewireable switch fuse unit of 230 Volt 50 Hz single phase of capacity 32 Amp including MS box with backelite fuse & fuse carrier fittings, operating insulated handle, top cover necessary locking arrangemnts etc as per IS/IEC 60947 1&3 including necessary wall mounting fitting complete all as specified and directed. Make Havells Cat part No. IHBRSE 2032 or equivalent including taking down the existing all as specified and directed

Description all as per item no 23 of above but three phase 32 Amp capacity complete all as specified and directed.

Description all as per item no 23 of above but three phase 63 Amp capacity complete all as specified and directed.

M&L for steel tubing galvanised 80 mm dia light grade complete with fittings such as elbows long/short, sockets laid in trenches/ fixed along with poles,under road,walls/ floor of buildings etc as protection to cables including demolition/cutting of road,PCC floor/wall& taking down of the old existing and repair of the road,floor/wall with matching with the existing complete all as specified and as directed.

Description all as per item no 26 of above but of size 50 mm dia bore complete all as specified and as directed.

Description all as per item no 26 of above but of size 40 mm dia bore complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete for poles/foundation complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete including form work for poles complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in coping etc including form work for poles complete all as specified and directed.

M&L for mild steel cross arms, bracings supports, clamps and back plates fabricated from structural steel sections, channel including nuts, bolts, washers welding, bending cold or not, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including taking down the old unserviceable complete all as specified and as directed.

S&F danger notice plate of 1.6 mm thick mild steel sheet vitreous enamaled white, with letters, figures and conventional skull and bones in post office red colour duly painted and written with enamelled paint fixed with and including MS clamps, bolts and nuts of approved size for LT, 20x15 cm size complete all as specified and directed.

S&F in replacement kiosk box for luminaires ,weather proof made out of PVC/HDPE/FRP housing fire retardant, non fusing, shock & rust proof, single piece moulded and cover with hinged door, pole mounting type comprising of copper connectors 04 pole of capacity 16 Amps with 6 Amp MCB single pole , of minimum size 300x200x125mm, IP 66 fixed on pole with MS, clamps 16xx3 mm with necessary nuts, washer and incl. applying two coats of synthetic enamel paint over a red oxide primer on steel surface/clamps and embossing/painting of Danger sign of size not less than 10cms x 7.5cms with letter and conventional skull and bones in single red color on front face of kiosk box complete all as directed. The quoted rate also include replacement of 3 core copper cabl 1.5 sqmm IsI marked from junction box to security light Make :- Syntex/supreme/Hensal.

M & L for road cutting incl necessary excavation 45 cm wide and 90 cm in depth as in trenches in any type of soils/rock for laying HT/LT UG cable through pipe after laying /through the cable trenches will be filling top with M&L PCC 1:3:6 type C-1 using 20 mm grdaeds stone aggregates from top over 15 cm thick hard good of broken boulders , 63 mm gauge over 15 cm bolders 100 mm dia over filled and rammed earth to make good the disburbed surface etc complete all as specified and directed.

M & L for demolitionof PCC floor/brick wall any type for laying LT UG cable through GI pipe after laying /through the cable trenches will be filling top with M&L PCC 1:3:6 type C-1 using 20 mm grdes stone aggregates, surface to make good the disburbed surface including removel of excavated material at 25 mtr from site including providing ditumber to the surface to match with surroundings etc complete all as specified and directed.

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for pole / cable / foundation etc including getting out in soft /loose soil complete all as specified and directed.

Excavation in trenches in any type of soil not exc 1.5 mtrs wide and exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out complete all as specified and as directed.

Returning, filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick after cable are laid and tested complete all as specified and directed.

Removing excavated material / surplus soil to a distance not exc. 50 mtrs & deposited where directed at a level not exc.1.5 mtr above the ground level complete all as specified and directed.

M&L for PCC cable cover class LV type 1 flat size 250 mm x 150 mm x 40 mm, ISI marked across the cable for protection of cable after sand cushioning complete all as specified and directed.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable incl spreading, levelling, watering and consiolidation complete all as specified and directed.

m/s gupta trading