REPAIR SERVICING PREVENTIVE MAINTENANCE OF MOTORS PUMP OF VARIOUS CAPACITY AND TYPES ELECTRIC PANELS STARTERS CONNECTED ASSOCIATED MISCELLANEOUS REPAIR WORKS ELECTRIC CABLE INCLUDING REWINDING ETC OF VARIOS WATER SUPPLY INSTALLATIONS UNDER GE MH AND

Material & Labour for disconnecting and taking down carefully for servicing Electric driven pumping set and motor of following capacities from foundation, disconnecting suction and discharge water line for carrying out repair work of pump set, dismantling of pump set, cleaning, repair replacement of all unserviceable parts, reassembling complete pumping set with top up the oil level, reinstalling , mounting and fixing on base channel on existing foundation and coupling properly to existing motor with proper balancing and alingment including recoupling of suction and discharge line, testing on full load for smooth functioning complete all as specified and directed. Note: (i) Rates including minor spares like gland, grease, nut bolts and major spares will be measured and paid separately under relavant items. (ii) Contractor should visit site before quoting the rates. (iii) Cost of transportation shall be deemed to be included in the rate quoted for these items. (iv) While taking out pump for repairs, the contractor will make arrengement pluging suction and discharge line with dead flanges without extra cost, so that pumping of installation is not disturbed and there is no leakage of water. (v) The contractor shall repair and refix the pump set within six working days from the date of opening and making it functionable .

75 HP Motor

60 HP Motor

40 HP Motor

30 HP Motor

25 HP Motor

20 HP Motor

15 HP Motor

12.5 HP Motor

7.5 HP Motor

Stainless steel shaft for pump of capacity 75 HP

Impeller SS/Copper/Brass suitable for pump of capacity 75 HP

MS geard coupling with suitable size of key for pump of capacity 75 HP

ng size and of pipe material CI/MS complete all as directed and as specified by Engr-in-charge.

Gland bush (shaft sleeves)suitable for pump of capacity 75 HP

Gland Plates suitable for pump of capacity 75 HP

Brass Distance bush suitable for pump of capacity 75 HP

Ball Bearing suitable for pump of capacity 75 HP

Supply only following spare/parts of pump set for 60 HP incorporate in the Item Ser No 1.00 above complete all as specified and directed:-

MS shaft for pump of capacity 60 HP

Impeller SS/Copper suitable for pump of capacity 60 HP

MS geard coupling with suitable size of key for pump of capacity 60 HP

Supply & fix in repair Cast iron sluice valve with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos complete including removing of old unsv one of the following bore sizes complete all as specified :-

Gland bush (shaft sleeves)suitable for pump of capacity 60 HP

Gland Plates suitable for pump of capacity 60 HP

Brass Distance bush suitable for pump of capacity 60 HP

Ball Bearing suitable for pump of capacity 60 HP

Supply only following spare/parts of pump set for 40 HP incorporate in the Item Ser No 1.00 above complete all as specified and directed:-

MS shaft for pump of capacity 40 HP

Impeller SS/Copper/Brass suitable for pump of capacity 40 HP

MS geard coupling with suitable size of key for pump of capacity 40 HP

Gasket set suitable for pump of capacity 75 HP

Gland bush (shaft sleeves) suitable for pump of capacity 40 HP

Gland Plates suitable for pump of capacity 40 HP

Brass Distance bush suitable for pump of capacity 40 HP

Ball Bearing suitable for pump of capacity 40 HP

Supply only following spare/parts of pump set for 30 HP incorporate in the Item Ser No 1.00 above complete all as specified and directed:-

MS shaft for pump of capacity 30 HP

Impeller MS/CI / Brass / SS suitable for pump of capacity 30 HP

MS geard coupling with suitable size of key for pump of capacity 30 HP

Gasket set suitable for pump of capacity 60 HP

Gland bush (shaft sleeves)suitable for pump of capacity 30 HP

Gland Plates suitable for pump of capacity 30 HP

Brass Distance bush suitable for pump of capacity 30 HP

Ball Bearing suitable for pump of capacity 30 HP

Supply only following spare/parts of pump set for 25 HP incorporate in the Item Ser No 1.00 above complete all as specified and directed:-

MS shaft for pump of capacity 25 HP

Impeller MS/CI / Brass / SS suitable for pump of capacity 25 HP

MS geard coupling with suitable size of key for pump of capacity 25 HP

Gasket set suitable for pump of capacity 40 HP

Gland bush (shaft sleeves)suitable for pump of capacity 25 HP

Gland Plates suitable for pump of capacity 25 HP

Brass Distance bush suitable for pump of capacity 25 HP

Ball Bearing suitable for pump of capacity 25 HP

Supply only following spare/parts of pump set for 20 HP incorporate in the Item Ser No 1.00 above complete all as specified and directed:-

MS shaft for pump of capacity 20 HP

Impeller MS/CI suitable for pump of capacity 20 HP

MS geard coupling with suitable size of key for pump of capacity 20 HP

Gasket set suitable for pump of capacity 30 HP

Gland bush (shaft sleeves)suitable for pump of capacity 20 HP

Gland Plates suitable for pump of capacity 20 HP

Brass Distance bush suitable for pump of capacity 20 HP

Ball Bearing suitable for pump of capacity 20 HP

Supply only following spare/parts of pump set for 15.0 HP incorporate in the Item Ser No 1.00 above complete all as specified and directed:-

MS shaft for pump of capacity 15.0 HP

Impeller MS/CI suitable for pump of capacity 15.0 HP

MS geard coupling with suitable size of key for pump of capacity 15.0 HP

Gasket set suitable for pump of capacity 25 HP

Gland bush (shaft sleeves)suitable for pump of capacity 15.0 HP

Gland Plates suitable for pump of capacity 15.0 HP

Brass Distance bush suitable for pump of capacity 15.0 HP

Ball Bearing suitable for pump of capacity 15.0 HP

Supply only following spare/parts of pump set for 12.50 HP incorporate in the Item Ser No 1.00 above complete all as specified and directed:-

MS shaft for pump of capacity 12.50 HP

Impeller MS/CI suitable for pump of capacity 12.50 HP

MS geard coupling with suitable size of key for pump of capacity 12.50 HP

Gasket set suitable for pump of capacity 20 HP

Gland bush (shaft sleeves)suitable for pump of capacity 12.50 HP

Gland Plates suitable for pump of capacity 12.50 HP

Brass Distance bush suitable for pump of capacity 12.50 HP

Ball Bearing suitable for pump of capacity 12.50 HP

Supply only following spare/parts of pump set for 7.5 HP incorporate in the Item Ser No 1.00 above complete all as specified and directed:-

MS shaft for pump of capacity 7.5 HP

Impeller MS/CI suitable for pump of capacity 7.5 HP

MS geard coupling with suitable size of key for pump of capacity 7.5 HP

Gasket set suitable for pump of capacity 15.0 HP

Gland bush (shaft sleeves)suitable for pump of capacity 7.5 HP

Gland Plates suitable for pump of capacity 7.5 HP

Brass Distance bush suitable for pump of capacity 7.5 HP

Ball Bearing suitable for pump of capacity 7.5 HP

Labour for attending the complaints of electric motor / pumps including complaints of electric fault of Panel board of water supply installations in the AOR of GE (MH & RH) round the clock on call basis when required and directed including attending the pipe line leakge inside the water supply installation, detect the pump motor cable fault testing, commissioning with skilled technicians and making working condition of water supply installations complete all as specified and directed by Engr-in-Charge. (Note: (i) Major Spares and material required if any will be measured and paid separately under relavant item (ii) The quotated rate shall be included the special tool charges requried for attending the fault (iii) Minor spare part required for attending the fault such as grease, nut bolts, washers, studs are included in quotated rate.)

75 HP Motor

60 HP Motor

40 HP Motor

30 HP Motor

25 HP Motor

20 HP Motor

15 HP Motor

12.5 HP Motor

7.5 HP Motor

Material and labour in repair for the sluice valve of following size spindle and change the Stainless Steel spindle and its internal part socket complete all labour work and fixing back to its original postion and make sluice valve functional complete all as specified

75 HP Motor

60 HP Motor

40 HP Motor

30 HP Motor

25 HP Motor

20 HP Motor

15 HP Motor

12.5 HP Motor

7.5 HP Motor

Gasket set suitable for pump of capacity 12.50 HP

75 HP Motor

60 HP Motor

40 HP Motor

30 HP Motor

25 HP Motor

20 HP Motor

15 HP Motor

12.5 HP Motor

7.5 HP Motor

Gasket set suitable for pump of capacity 7.5 HP

75 HP Motor

60 HP Motor

40 HP Motor

30 HP Motor

25 HP Motor

20 HP Motor

15 HP Motor

12.5 HP Motor

7.5 HP Motor

Supply and fix in repair terminal block made out from brass complete with backelite plate for the following capacities of motor complete all as specified & directed.

25 HP Motor

10/7.5 HP Motor

5 HP Motor

3 HP Motor

Dismantling and taking out pump motor ,transporting the same to work shop for opening the motor, removing burnt winding and cleaning winding slots and rewinding of motor using suitable existing gauge/ size with supper enamelled copper wire, replacing insulation paper of class F and fire proof sleeves, varnishing, baking complete, oiling, greasing, replacing old rear/ front bearings with new and reassembling complete motor including testing at site complete all as specified and directed by Engr- in -charge for following capacity of motor.

Taking down unserviceable foot valve and supply and fixing CI foot valve of following sizes including jointing materials complete all as specified and directed

200 MM Dia

150 MM Dia

100 MM Dia

80 MM Dia

Supply & fix in repair Spider Coupling / star coulpling / tyre coupling of Suitable sizes with existing alignement complete all as specified and directed

75 HP Motor and Pump

60 HP Motor

40 HP Motor

30 HP Motor

25 HP Motor

20 HP Motor

15 HP Motor

12.5 HP Motor

7.5 HP Motor

Servicing of Starter Panel of any capacity and any type by using anti rust spray to removal of carbaon from moving contact carbon upto the entire statisfaction of Engr-in-Charge

Taking down unserviceable CI/DI/ fitting of any type, Material & Labour for cast iron fitting (any type radius and angle) taper any type (Straight) bend increasing decreasing or double socket etc Tee pieces, single branch ‘Y’ junction double branch, coller, capacity and plugs for up to 150 mm bore to 400 mm bore CI pipe conforming to IS-1538- 1976 complete all as specified and directed.

Taking down unserviciable and Supply and fix 3 pole power contactor of following sizes suitable for existing contactor complete all as specified and directed :-

Relay Range 66 to 110 Amps

Relay Range 30 to 50 Amps

Relay Range 24 to 40 Amps

Relay Range 20 to 33Amps

Relay Range 14 to 23 Amps

Taking down unserviciable and Supply and fix SD timer 100 range 3 to 60 Sec coil voltage 240/360/415 Volt AC. (Make - L&T CAT part No. ST803280000 or equivalent rating on other make )

Taking down unserviciable and Supply and fix thermal overhead relay with start and off/reset of Amps of following ranges suitable for existing complete all as specified and directed

300 MM Dia

200 MM Dia

150 MM Dia

100 MM Dia

80 MM Dia

Taking down unserviciable and Supply and Fixing Water pressure gauge of capacity 12 Kg/mm2 gauge 6" or 8" (size of dial) complete all as specified and directed (Make- ISI Make)

Taking down unserviciable and Supply and fix NRV of following size, Class PN 1.6, hydrodynamically guided, closing non return valve with gray Cast iron body, synthetic rubber coated reinforced ball, flanged type including 6mm thick rubber gasket, MS nuts, bolts and washers complete all as specified and directed.

400 mm dia

300 mm dia.

200/150 mm dia.

100/80 mm dia.

Taking down unserviciable and Supply and fix air release valve cast iron body flanged type double acting type, ISI Mark of 100 mm Size complete all as specified and directed. Make : Swastik / Normax/ Kartar / Kirloskar

Taking down unserviciable and Supply and fix rubber gland packing suitable for sluice valve of following sizes complete all as specified and directed.

Material and labour for painting of ,motor complete set including base plate, of capacity up to 40 HP motors with two coat of synthetic enamel paint after preparing surfaces including wiring and painting of MES / SM No complete all as specified and directed by Engineer-in-Charge.

Material and labour for painting of pump,motor complete set including base plate, of capacity 60 HP to 75 HP motor with two coat of synthetic enamel paint after preparing surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for cleaning with surface dressing or trimming of natural ground bushes/small trees/shurbes including removing and carrying away the rubbish from site to a distance not exceeding 50mtr away complete all as specified and directed by Engineer-in- charge.

Taking down unserviciable and Supply and fix RYB indicator lamp LED type (Set of three lamp) for incoming and outgoing supply as per existing sizes complete all as specified and directed by Engr-in-Charge.

Taking down unserviciable and Supply and Fix CTs of 200/5 current rating AC, 415 V, three phase including connecting to supply as per existing complete all as specified and directed by Engr-in-Charge.

Taking down unserviciable and S& F single phase preventor relay SPPR type Sz5(6 wire) 415 V 50 Hz Make Siemens or equevelent approvd make

Supply only bearings in repair for the following capacity of motor as required as directed by Engineer-in-charge.

Material and labour for servicing for taking down carefully electric motor 3-phase 415v,50Hz,AC from foundation/ coupling, transporting to civil workshop, opening the motor,Checking the insulation value of the windings, insulating the winding with same class of insulation varnish,Oiling Greasing of bearing and busing, painting with one coat of synthetic enamel paint as per color code and back to site for re-installing the motor and connecting to the pump, testing the motor for satisfactory performance complete

all as specified and directed by Engineer -in-Charge for the following capacity. (Major Part will be Measured and paid in relevant items of this schedule & rates includes for minor spares)

Supply only PPM testing kit for portable/ drinking water measuring range 0.2 PPM to 5 PPM complete all as specified and directed (Make- Any approved Coy From Govt Lab)

Taking down unserviciable and Supply and fix Ammeter three phase digital type 50 HZ, AC as per existing sizes/ range complete all as specified and directed by Engr-in-Charge.

185 Sqmm 3.5 Core

95 Sqmm 3.5 Core

50 Sqmm 3.5 Core

35 Sqmm 3.5 Core

10 Sqmm 4 Core

Taking down unserviciable and Supply and fix voltmeter three phase digital type 0 to 500 V, 50 HZ, AC as per existing sizes complete all as specified and directed by Engr-in-Charge.

Taking down unserviciable and Supply & fix Multicore PVC insulated, PVC Unsheathed industrial cable with flexible bright annealed copper conductor for voltage grade up to 1100 volts Conformimg to IS 694 for following size

16 Sqmm 3 Core

10 Sqmm 3 Core

6 Sqmm 3 Core

4 Sqmm 3 Core

Taking down unserviciable and Supply and laying PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade complete layin in trenches /wall/ floor / pipe etc of cross-sectional area of following site

Taking down unserviciable water meter 300 mm dia by discunnecting of all nuts bolts and repair the same by replacing all unserviceable parts and calibration / testing the same from MIDC water works authority complate complete all as specified and directed

Taking down unserviciable and Material & Labour for submersible cable flat of 3 core 6 Sqmm with multistanded copper coundecter complete all as specified and directed.

400 mm dia sluice valve

300 mm dia sluice valve

250 mm dia sluice valve

200 mm dia sluice valve

150 mm dia sluice valve

100 mm dia sluice valve

Supply and fix in repair MCCB TPN of following sizes suitable for fixing on Panel/ Starter of pump and motor with extended terminals complete all as specified. Make : Schindier / Legrand / L&T / ABB

MCCB 400 Amps, 4 pole, 50 KA

MCCB 315 Amps, 4 pole, 50 KA

MCCB 250 Amps, 4 pole, 50 KA

MCCB 160 Amps, 4 pole, 36KA

MCCB 100 Amps, 4 pole, 25 KA

MCCB 63 Amps, 4 pole, 25 KA

Material & labour in repair for taking down unserviceable Actuator of water supply automation system setup from valve and servicing it properly and replace the burnt out / unserviceable components if any of the setup and aligned the same for proper functioning and reinstall at it's initial position including testing proper complete all as specified and directed by Engr-in-Charge. Note : (i) Rates quoted shall be deemed to be included for supply and fixing of the protection relay, contactor, pin, nozzle, minor valves, gland, grease, nut bolts . (ii) Contractor should visit site before quoting the rates. (iii) Cost of transportation shall be deemed to be included in the rate quoted for these items.

Supply and fix in repair motorised actuator with operating Gear box and motor suitable for 400/300 mm dia sluice valve along with necessary fabrication arrangement to fix on existing sluice valve. Actuator Motor starter and connection to starter, cables and fabrication is deemed to be included in quotated rate complete all as specified and directed by Engr-in-Charge.

Desmentaling of Electromagnetic flowmeter of make / model of Krohne of size 400 / 300 mm dia meter and checking the serviceablity of spares and re-installed on same location with changing faulty spare parts testing the same complete all as directed by Engineer in charge. Note : i) Quotated rate shall include and no extra cost is paid for transport if any required for meter ii) Quotated rate shall include and no extra cost is paid for Communication cable any type / any size upto 20 mtr iii) Quotated rate shall include and no extra cost is paid for Any specialist visit for any specific item

Dismmantling of motor and its fabricated foundation of 7.5 HP motor along with pump, grouting bolt, repair of damaged surface complete and installed new fabricated structure with using channels not less than channel size 150 mm X 80 mm X 6 mm complete suitable for existing pump and motor of capacity 7.5 HP complete all as directed.

Taking down old unserviceable change overswitch and connections of cable and supply and fix changeover switch of 4 pole 400 Amps, 80 kA, 415 volt capacity including re-installation of the same along with its connection with testing and commissiong complete all as specified and directed

Taking down old unserviceable change overswitch and connections of cable and supply and fix changeover switch of 4 pole 200 Amps, 50 kA, 415 volt capacity including reinstalltion of the same along with its connection with testing and commissiong complete all as specified and directed

Supply , install, testing and commissioning in repair weatherproof, dust and vermin proof LT distribution panel manufactured by CPRI approved manufacturers suitable for 02 X 7.5 HP motor fully automatic start delta starter, factory made, indoor type of size not less than 900 mm (h) X 750 mm (w) X 300 mm (d) so as to accommodate the following accessories, depth not less than 300 mm, IP-54 protection and all as per IE rules, prewired and fabricated with not less than 2 mm thick CRCA sheet, powder coated double door openable, mounted on MS angle iron frames 25 mm X 25 mm X 5 mm welded in shape with two coats of synthetic enamal paint over a coat of red oxide primer including necessary grouting in PCC 1:3:6, type-C1 using 20 mm graded coarse stone aggregates, complete with PCC, depth of angle iron stand below the ground not less than 30 cm and above ground level not less than 45 cm incuding cable terminations with glands, lugs etc and consisting of following :

Incoming MCCB & onload change over i) 40 Amps, 04 Pole 16 kA, Ics=Icu=100% DN Series MCB Make L & T - 01 No ii) 50 Amps, 04 Pole 20 kA, on load Change over switch Make L & T - 01 No Outgoing MCCB, MCB and panel Accessories i) 16 Amps, 03 Pole MCB 16 kA, C curve Make L & T - 02 Nos ii) 06 Amps, 02 Pole MCB 10 kA, C curve Make L & T (for control) - 01 No iii) Timer for Star Delta connection - 02 Nos iv) Ralay of capacity 9 - 14 Amps for motor - 02 Nos v) Power conctactor 03 Pole 240 Volt with 02 NO and 02 NC of 32 Amps capacity - 06 Nos vi) Din rail connector of 50 Amps - 15 Nos vii) Digital Smart Panel Meter for showing Voltage and Amp meter suitable for 40/5 CT - 01 No viii) CT of Capacity 40/5 - Set of 03 ix) 4 Sq mm wire for Power wiring of 12.5 HP Motor - 45 mtr (approx) x) 1.5 Sq mm wire for Power wiring for control, other panel wiring and CT wiring - 100 mtr (approx) xi) Hardware like lugs, nut bolts, insulator for bus bar, cable tie, cable tray, xii) Motor on / off indicator - set of 02 Nos xiii) R,Y,B indicator for main incommer - Set of 03 Nos xiv) ON and Off push button along with NO and NC element - 02 Nos

Supply , install, testing and commissioning in repair weatherproof, dust and vermin proof LT distribution panel manufactured by CPRI approved manufacturer suitable for 02 X 12.5 HP

motor fully automatic start delta starter, factory made, indoor type of size not less than 900 mm (h) X 900 mm (w) X 300 mm (d) so as to accommodate the following accessories, depth not less than 300 mm, IP-54 protection and all as per IE rules, prewired and fabricated with not less than 2 mm thick CRCA sheet, powder coated double door openable, mounted on MS angle iron frames 35 mm X 35 mm X 5 mm welded in shape with two coats of synthetic enamal paint over a coat of red oxide primer including necessary grouting in PCC 1:3:6, type-C1 using 20 mm graded coarse stone aggregates, complete with PCC, depth of angle iron stand below the ground not less than 30 cm and above ground level not less than 45 cm incuding cable terminations with glands, lugs etc and consisting of following :

Incoming MCCB & onload change over i) 63 Amps, 04 Pole 16 kA, Ics=Icu=100% DN Series MCCB Make L & T - 01 No ii) 100 Amps, 04 Pole 20 kA, on load Change over switch Make L & T - 01 No Outgoing MCCB, MCB and panel Accessories i) 25 Amps, 03 Pole MCB 16 kA, C curve Make L & T - 02 Nos ii) 06 Amps, 02 Pole MCB 10 kA, C curve Make L & T (for control) - 01 No iii) Timer for Star Delta connection - 02 Nos iv) Ralay of capacity 9 - 14 Amps for motor - 02 Nos v) Power conctactor 03 Pole 240 Volt with 02 NO and 02 NC of 32 Amps capacity - 06 Nos vi) Din rail connector of 50 Amps - 15 Nos vii) Digital Smart Panel Meter for showing Voltage and Amp meter suitable for 63/5 CT - 01 No viii) CT of Capacity 63/5 - Set of 03 ix) 4 Sq mm wire for Power wiring of 12.5 HP Motor - 45 mtr (approx) x) 1.5 Sq mm wire for Power wiring for control, other panel wiring and CT wiring - 100 mtr (approx) xi) Hardware like lugs, nut bolts, insulator for bus bar, cable tie, cable tray, xii) Motor on / off indicator - set of 02 Nos xiii) R,Y,B indicator for main incommer - Set of 03 Nos xiv) ON and Off push button along with NO and NC element - 02 Nos

Supply , install, testing and commissioning in repair t weatherproof, dust and vermin proof LT distribution panel manufactured by CPRI approved manufacturer suitable for 02 X 20.00 HP motor fully automatic start delta starter, factory made, indoor type of size not less than 900 mm (h) X 1050 mm (w) X 300 mm (d) so as to accommodate the following accessories, depth not less than 300 mm, IP-54 protection and all as per IE rules, prewired and fabricated with not less than 2 mm thick CRCA sheet, powder coated double door openable, mounted on MS angle iron frames 35 mm X 35 mm X 6 mm welded in shape with two coats of synthetic enamal paint over a coat of red oxide primer including necessary grouting in PCC 1:3:6, type-C1 using 20 mm graded coarse stone aggregates, complete with PCC, depth of angle iron stand below the ground not less than 30 cm and above ground level not less than 45 cm incuding cable terminations with glands, lugs etc and consisting of following :

Incoming MCCB & onload change over i) 80 Amps, 04 Pole 25 kA, Ics=Icu=100% DN Series MCCB Make L & T - 01 No ii) 100 Amps, 04 Pole 50 kA, on load Change over switch Make L & T - 01 No Outgoing MCCB, MCB and panel Accessories i) 40 Amps, 03 Pole MCB 16 kA, C curve Make L & T - 02 Nos ii) 06 Amps, 02 Pole MCB 10 kA, C curve Make L & T (for control) - 01 No iii) Timer for Star Delta connection - 02 Nos iv) Ralay of capacity 14 - 21 Amps for motor - 02 Nos v) Power conctactor 03 Pole 240 Volt with 02 NO and 02 NC of 32 Amps capacity - 06 Nos vi) Din rail connector of 50 Amps - 15 Nos vii) Digital Smart Panel Meter for showing Voltage and Amp meter suitable for 80/5 CT - 01 No viii) CT of Capacity 80/5 - Set of 03 ix) 6 Sq mm wire for Power wiring of 12.5 HP Motor - 45 mtr (approx) x) 1.5 Sq mm wire for Power wiring for control, other panel wiring and CT wiring - 100 mtr (approx) xi) Hardware like lugs, nut bolts, insulator for bus bar, cable tie, cable tray, xii) Motor on / off indicator - set of 02 Nos xiii) R,Y,B indicator for main incommer - Set of 03 Nos xiv) ON and Off push button along with NO and NC element - 02 Nos

Supply , install, testing and commissioning in repair weatherproof, dust and vermin proof LT distribution panel manufactured by CPRI approved manufacturer suitable for 02 X 40.00 HP motor fully automatic start delta starter, factory made, indoor type of size not less than 900 mm (h) X 1200 mm (w) X 300 mm (d) so as to accommodate the following accessories, depth not less than 300 mm, IP-54 protection and all as per IE rules, prewired and fabricated with not less than 2 mm thick CRCA sheet, powder coated double door openable, mounted on MS angle iron frames 35 mm X 35 mm X 6 mm welded in shape with two coats of synthetic enamal paint over a coat of red oxide primer including necessary grouting in PCC 1:3:6, type-C1 using 20 mm graded coarse stone aggregates, complete with PCC, depth of angle iron stand below the ground not less than 30 cm and above ground level not less than 45 cm incuding cable terminations with glands, lugs etc and consisting of following :

Incoming MCCB & onload change over i) 200 Amps, 04 Pole 36 kA, Ics=Icu=100% DN Series MCCB Make L & T - 01 No ii) 200 Amps, 04 Pole 50 kA, on load Change over switch Make L & T - 01 No Outgoing MCCB, MCB and panel Accessories i) 80 Amps, 03 Pole MCCB 25 kA, C curve Make L & T - 02 Nos ii) 06 Amps, 02 Pole MCB 10 kA, C curve Make L & T (for control) - 01 No iii) Timer for Star Delta connection - 02 Nos iv) Ralay of capacity 30 - 50 Amps for motor - 02 Nos v) Power conctactor 03 Pole 240 Volt with 02 NO and 02 NC of 50 Amps capacity - 06 Nos vi) Din rail connector of 80 Amps - 15 Nos vii) Digital Smart Panel Meter for showing Voltage and Amp meter suitable for 200/5 CT - 01 No viii) CT of Capacity 200/5 - Set of 03 ix) 10 Sq mm wire for Power wiring of 40 HP Motor - 45 mtr (approx) x) 1.5 Sq mm wire for Power wiring for control, other panel wiring and CT wiring - 100 mtr (approx) xi) Hardware like lugs, nut bolts, insulator for bus bar, cable tie, cable tray, xii) Motor on / off indicator - set of 02 Nos xiii) R,Y,B indicator for main incommer - Set of 03 Nos xiv) ON and Off push button along with NO and NC element - 02 Nos

DI pipe 300 mm dia

DI pipe 200 mm dia

DI pipe 150 mm dia

DI pipe 100 mm dia

DI pipe 80 mm dia

Taking down old existing unserviceable cast iron / ductile iron / ERW pipe and Material & labour for DI pipes with socket end or both ends flanged centrifugally cast, class -'C', conforming to IS 8329/ 2000, in any length suitable for socket / flange joint complete all as specified & directed of following sizes:-

ERW pipe 300 mm dia

ERW pipe 200 mm dia

ERW pipe 150 mm dia

ERW pipe 100 mm dia

ERW pipe 80 mm dia

Taking down old existing unserviceable cast iron / ductile iron / ERW pipe and Material & labour for ERW pipes with socket end or both ends flanged centrifugally cast, class -'C', conforming to IS 8329/ 2000, in any length suitable for socket / flange joint complete all as specified & directed of following sizes:-

Taking down unserviciable and Supply & fix SS wire rope with PVC Coating of size 10mm dia complete all as specified

Taking down unserviceable and Supply and fix gland packing suitable for sluice valves and motors complete all as specified

supply and fixing in repair including Taking old unservicable Star Delta starter capacity upto 75 HP to operate motor working on 380 to 440 volts, 3phase, 50 HZ with no volt coil, over load element, and ON -OFF push buttton, with necessary material and connectd to supply etc. complete starter with original sheet encloser complete all as specified and as directed. Make : L & T Cat No ML4FASD

600 mm X 600 mm on plan and deep 900 mm

900 mm X 900 mm on plan and deep 900 mm

1200 mm X 1200 mm on plan and deep 1000 mm

1200 mm X 1200 mm on plan and deep 1200 mm

Material & labour in repair for taking out old broken valve pit and removal of all westage material and rebuilt the broken valve pit on same location with same size along with chamber cover arrangement of following sizes complete all as specified and directed

400mm bore

300mm bore

200mm bore

150 mm bore

100 mm bore

400 mm dia sluice valve

300 mm dia sluice valve

250 mm dia sluice valve

200 mm dia sluice valve

150 mm dia sluice valve

100 mm dia sluice valve

80 mm dia sluice valve