Protection of river Bank at Kendukuchi area from the erosion of river Brahmaputra.

Medium Jungles: Clearing medium jungles and trees upto 15 cm. girth including cutting, uprooting roots and stumps, removing them from the site of the work, etc. complete as directed. (When 30% to 60 % of the area is covered by shrubs, trees etc).

Collection and supply of River silt by truck carriage free from debries and other foreign material, etc. complete as directed. By mechanical Means (i) For initial upto 1.00 km & for all lifts. (ii) For beyond initial 1 km & upto 10.00 km & for all lifts. L= 2KM

Earth work in excavation by hydraulic excavator, to proper grade and slopes as required including utilizing the spoils for filling works in the vicinity including removing roots & vegetation, dressing to design section etc. complete as directed. Ordinary Soil, For depth up to 3.00 m

Earthwork in bank trimming to the designed section /slope by mechanical means including removing the trimmed soils to a minimum distance of 30 m, complete as directed

Supply of Geo Bags Type-B (Size 2.00m × 1.50m inner to inner) (Pillow Type) made of composite layers of Polypropylene (PP) fibre as per IS 16653: 2017 for Nonwoven and IS 16654 : 2017 for Woven: Woven Geo-textile for the outer cover (300gsm): The woven geo textile is woven with multifilament woven fabric manufactured from ultra violet stabilized polypropylene. Geo-textile used to manufacture geo textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids. Properties (i) Tensile strength (MD) ≥80 KN/m & Tensile strength (CD) ≥70 KN/m (ii) Elongation (MD) ≤25% & Elongation (CD) ≤25% (iii) Abrasion ≥75% (iv) Trapezoidal Tear Strength (MD) ≥1500N & Trapezoidal Tear Strength (CD) ≥1300N (v) CBR Puncture strength ≥900N (vi) Permeability ≥18 l/m2/sec (vii) AOS ≤250 micron (viii) UV Resistance @500 hours retained Tensile strength (MD) & (CD) ≥80% (ix) Mass ≥300 gm/m² (x) Seam strength ≥50 % of actual fabric strength. Non-Woven Geo-textile for the inner layer (300gsm): It is needle punched non-woven geo-textile made of 100% polypropylenestaple fibres which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis. Properties (i) Wide Tensile strength (MD) ≥15 KN/m & Wide Tensile strength (CD) ≥15 KN/m (ii) Elongation (MD) ≥50% & Elongation (CD) ≥50% (iii) Abrasion ≥95% (iv) Trapezoidal Tear Strength (MD) ≥340 N & Trapezoidal Tear Strength (CD) ≥340 N (v) CBR Puncture strength ≥3000 N (vi) Permittivity ≥1.25 s-1 (vii) Permeability ≥60 l/m2/sec (viii) AOS ≤75 micron (ix) UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥80% (x) Mass ≥300 gm/m² (xi) Thickness at 2 KPa ≥3 mm (xii) Seam strength ≥80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge. (Bags are to be supplied of 15 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material)

Supply of Geo-textile bags of type-A (1.03 × 0.70 m) inner to inner made of Geo-textile non-woven fabricsheets of 400 GSM manufactured from 100% virginPolypropylene (PP) fibre with minimum properties as per IS 16653:2017 i. Wide Tensile strength (MD) ≥ 20KN/m & WideTensile strength(CD) ≥20 KN/m ii. Elongation (MD) ≥50% & Elongation (CD) ≥ 50% iii. Abrasion ≥ 95% iv. Trapezoidal Tear Strength (MD) ≥ 450N &Trapezoidal Tear Strength (CD) ≥ 450N v. CBR Puncture strength ≥ 4000N vi. Permittivity ≥ 1.10s – 1 vii. Permeability ≥ 40l/m2/sec viii. AOS ≤ 75 micron ix. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% x. Mass ≥ 400 gm/m² xi. Thickness at 2KPa ≥ 3 mm xii. Seam strength ≥ 80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Bags are to be supplied of 100 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt. of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO (Certified Laboratory should invariably be submitted against each batch of material)

Construction and supply of Wire -netting box of size 1.50 m × 1.50 m × 0.45 m made with mechanically woven, double twisted, hexagonal shaped wire mesh with wire made of low carbon, high ductile MS wire with heavy class of galvanization with an additional layer of PVC coating with mesh type of 10 × 12 as per EN 10223 & ASTM A975, mesh wire of 2.70 mm (I.D) /3.70 mm (OD) tensile strength of 450-500/mm2, edge wire selvedge around it at least 2.5 times, lacing wire (Zinc PVC coated) of 2.20 mm (I.D)/3.20 mm (OD), VC coating thickness of 0.50 mm nominal, 0.38 mm minimum, Mesh opening size 150 mm × 150 mm and with average weight per unit being 12 Kg with additional 3% of the weight of box for lacing wire supplied separately, supporting the facing of the box with zinc coated steel wire of required length as directed, complying with ASTM and European norms

Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653: 2017 (i) Wide Tensile strength (MD) ≥15KN/m & Wide Tensile strength (CD) ≥15KN/m (ii) Elongation (MD) ≥50% & Elongation (CD) ≥50% (iii) Abrasion ≥95% (iv) Trapezoidal Tear Strength (MD) ≥340 N & Trapezoidal Tear Strength (CD) ≥340 N (v) CBR Puncture strength ≥3000 N (vi) Permittivity ≥1.25 s-1 (vii)Permeability ≥60l/m2/sec (viii)AOS ≤75micron (ix)UV Resistance @500 hours retained Tensile strength (MD) & (CD) ≥80% (x) Mass ≥ 300gm/m² (xi)Thickness at 2KPa ≥3mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer, Batch Number & its dimensions clearly on each roll with “WRD Govt of ASSAM” to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material).

Supply of Sewing Thread/Yarn PPMF Stitching Thread (2000 Den. Kaplon).

Labour charge for laying Geo fabric sheet as filter bellow pitching including carrying, lapping, wrapping & stitching as directed by the Engineer-in-Charge.

Filling and laying of nonwoven Geo-textile bag of dimension 2.00mx1.50m excluding excavation of specified silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand having minimum volume 0.612 Cum after filling, double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100m complete as directed. (ii) With Engine Boat

Filling and laying of Geo bags of size 1.03m X 0.70m excluding excavation of silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt having minimum weighing 126.00 Kg and minimum volume 0.084 Cum after filling , double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (ii) Without Boat

Filling and laying in cage with silt filled Geo bags of size 1.03m X 0.70m excluding excavation of specified silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand having minimum weighing 126.00 Kg and minimum volume 0.084 Cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly in cages made of wire netting sheets of size 2.57x1.66m of 8G galvanized wire making the cage from 2 nos. of wire netting sheet by tying the projected wires complete as directed. Without boat

Supply of Pre stressed Cement Concrete (PSC) Porcupine members of size 0.10m X 0.10mX 3.00m with M-30 grade of cement concrete conforming to IS 1343 : 2012 using super-plasticizer @1.2 lit/bag of cement with graded broken coarse aggregates up to 20mm size down conforming to IS 10262:2009 & IS 456:2000 and reinforced with 4 Nos. of 4 mm dia high tensile steel wire cable / strand with necessary cover and 4 mm high tensile stirrups at 250mm C/C, in conformity with IS-6403:R2002 and stressed to required strength not exceeding 9.18 N/mm, holes of 16 mm dia at 50 cm inside f

rom both ends in the same face and in either face of post another 2 Nos. of holes of size 16 mm dia at 65mm inside from both ends including properly curing for 21 (twenty one) days and carriage of porcupine members from factory to the stack yard within a distance up to 50 Km including loading, unloading & stacking complete as directed.

Labour charge for launching of PSC Porcupine including carriage of PSC porcupine members of size 0.10m × 0.10m × 3.00m from the stack yard to the place of launching, erection of the Porcupine with 6 (six) members properly, supply & fitting/fixing with 12 mm dia 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) Launching with boat

Labour charge for launching of PSC Porcupine including carriage of PSC porcupine members of size 0.10m × 0.10m × 3.00m from the stack yard to the place of launching, erection of the Porcupine with 6 (six) members properly, supply & fitting/fixing with 12 mm dia 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) Launching without boat