ADDN/ALTN TO SMALL ARM RANGE AT AF STN UTARLAI

Amount

Dismantling framed trusses n exc 10 Sqm complete all as specified and directed

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed

Demolition of cement concrete (unreinforced ) in ground floors and pavings n exc 15 cm thickness (below or above ground level, complete all as specified and directed.

Demolition of PCC block/stone block masonary of built in cement mortar complete all as specififed and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes for laying cables, pipe lines, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

M&L for PCC 1:4:8 type D-2(40mm graded aggregate) in foundation , sub base, filling and mass concrete and post holes complete all as specified.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed.

M & L for RCC M-30 (20mm graded stone aggregate) design mix as in foundations, including beams, plinth beams, bases for columns etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as soecified and directed

M&L for RCC M-30 (20 mm graded stone aggregate) design mix as in Columns, pillars, piers, posts and struts complete all as specified and directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specifed & directed .

M&L for RCC M-30 (20 mm graded stone aggregate) design mix as in Beams, cantilevers, bressummers, lintels over 1.5m span complete alll as specifed & directed .

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specifed & directed .

M&L for RCC M-30 (20 mm graded stone aggregate) design mix as in slab, complete alll as specifed & directed .

M & L for TMT bars 10mm dia and over, cut to length bent to shape required incl crancking , bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conf to TMT bar complete all as specified.

M & L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required incl crancking , bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified.

M&L for broken stone or boulder of Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L for PCC 1:4:8 (40 mm graded aggregate ) for sub base 100 mm thick type-D2 complete all as specified and directed

M&L for PCC 1:2:4 (12.5 mm graded aggregate ) for sub base 100 mm thick type-B0 complete all as specified and directed

M&L for 15mm thick Screed bed or bedding layer of cement mortar in 1:4 for laying floor finishes complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for rendering 10mm thick in CM 1:4 on stone concrete including finish even and smooth surfaces without using extra cement alongwith preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint, over a coat of chalk whiting complete all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3 on stone concrete including finish even and smooth surfaces without using extra cement complete alongwith preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white wash, over a coat of chalk whiting complete all as specified and as directed.

Removing building materials/ Dabris to a distance of exc 5.0 KM but not exc 6.0 KM, beyond the lead included in the rates, including loading, unloading and stacking at the destination

M&L for Cement concrete in parapet , packing jambs , coping Type B1 ( 1:2:4 ) ( 20 mm graded aggegate) complete all as specified and directed.

S&F 35 mm thick factory made plain panelled shutter ( two panel) out lock rail and pane of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated , complete all as specified and directed.

M & L for preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F for 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.

S & F for Aluminium anodised barrel tower bolt of extruded section, 200 mm long of bolt and fixed with screws, complete all as specified and directed.

S & F Mild steel butt hinge, 75 mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed .

S&F 125mm size, aluminium (cast type) anodized, handle and fixed with steel screws complete all as specified and directed

S&F MS Fe -410 W gd E-250 quality B framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed .

M&L for preparation of new treated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer in complete all as specified and directed

S&F of sub main wiring with two run of single core(FRLSH) PVC insulated and unsheathed cable with copper conductor (multistranded) having nominal area 1.5 Sqmm drawn through conduit concealed type and making electric connections including one run (FRLSH) PVC insulated single core copper conductor cable 1.5 Sqmm as a earth continuity conductor drawn through PVC conduit, including cutting chases in brick/stone wall wherever necessary, replastering and making good to match the existing specifications including taking down old submain wiring complete all as specified and directed by Engineer-in-Charge. Note:- (i) Rates are deemed to be included chases of conduit and making holes in wall/foor for passing in or through conduit (ii) Two run of 1.5 sqmm single core (FRLSH) PVC insulated copper conductor cable one run of 1.5 sqmm copper conductor cable (FRLSH) as a earth lead and PVC conduit will be measured as a one unit.

S & F sheet metal enclosures single pole and neutral 8 way, 240 volts with 200 Amps rated bus bar with double fixed on flush to the wall including making the hole in the wall and fixing the DB including cement works and plastering complete all as specified and directed.

S&F MCBs single pole and neutral, 240 volts 6 to 32 Amps, 10 KA complete all as specified and directed

S& F MCB single pole, 240 Volts 6 to 30 Amps capacity, 10 KA complet all as specified and directed.

M & L for Earthing complete with 600x600x6.0mm thick Gl earth plate electrode buried directly in ground not less than 2.25mtr below GL with the top edge of the plate at a depth not less than 1.5 mtr from GL connected to Gl earth lead of 4mm dia by means of nuts, bolts, washers, checknuts etc made out of galvanised iron or steel, earth wire protected by galvanised iron pipe, connected to main switch board complete including necessary earth work excavation, PCC chamber, watering pipe, funnel, wiremesh, RCC chamber cover etc complete all as specified and directed. in EP No 3 of SSR Part-1.

S& F of 8Watt LED insta ray spike light operating temp range-10 to +50 degee C, rated voltage 12V AC, 50 Hz System wattage 8W plus minus 10%, product lumen output=480 lm, efficacy >=60 lm/w, ingress protectin IP 68, Surge protection 2.0 KV with open & short circuit protection including convertor 200 Volts to 9 Volts all as specified and directed.

Supply , laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armouned, electric power cables(Heavy Duty 1100 Volts grade with stranded aluminium conductor of size 6.0 Sqmm 2 core complete all as specified and directed.

Removing excavated materials to a distance n.exc 50mtr and deposting where directed at a level nexc 1.5 mtr above the starting point complete all as specified and directed.

M&L for Provifing tibba sand in trenches as sand cushioning to U/G cable including punning down of sand inlayer complete all as specified and directed.

M&L for 40 to 50mm thick rough dressed Jodhpur type stone slab cover 25 to 30cm wide and 40 to 50 cm in length laid dry abutting each other complete all as specified and directed.

National Rewinding Works (BID ID -3111162)

M/s Malinath Electricals (BID ID -3111639)

M/S HARIOM CONSTRUCTION COMPANY (BID ID -3111068)

S.K. INFRASTRUCTURE (BID ID -3111631)

Lalit and Brothers (BID ID -3099520)