REPAIRING AND POLISHING TO VARIOUS WOODEN FURNITURE ARTICLES AND REC CANNING OF CHAIRS, RE-UPHOLSTERY OF SOFA SET AT SF STN SIRSA

Amount

M&L for First Class Hardwood (Shisham) LEG for CHAIR EASY (Drawing No. FD-229), made to shape and size including Taking out/down broken Leg, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) FRONT BATTEN/ BACK BATTEN for CHAIR EASY (Drawing No. FD-229), made to shape and size including Taking out/down broken Front Batten/ Back Batten,complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) FRONT RAIL/ BACK RAIL of SEAT/BACK for CHAIR EASY (Drawing No. FD-229), made to shape and size including Taking out/down broken Front Rail/ Back Rail of Seat/ Back, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) SIDE RAIL of SEAT/ BACK for CHAIR EASY (Drawing No. FD-229), made to shape and size including Taking out/down broken Side Rail of Seat/ Back, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) ARM for CHAIR EASY (Drawing No. FD-229), made to shape and size including Taking out/down broken Arm, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) SEAT for CHAIR EASY (Drawing No. FD-229), made to shape and size including Taking out/down broken Seat, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) BACK for CHAIR EASY (Drawing No. FD-229), made to shape and size including Taking out/down broken Back, complete all and as directed by Engineer in Charge.

M&L for NYLON BUFFERS (Set of 4 No) for CHAIR EASY (Drawing No. FD-229) and fixing with Steel Screw on Legs including Taking out/down unserviceable Buffers, complete all and as directed by Engineer in Charge.

M&L for Removing wornout Caning to Seat and Back of CHAIR EASY (Drawing No. FD-229) , weaving recaning with and including White Plastic Cane 2.0mm wide, half-round and 4.0mm wide on Borders in Godrej/ Gwalier Pattern, complete all as shown in Drawings, complete all and as directed by Engineer in Charge.

Preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots, scrubbing with Emery Paper to obtain a smooth surface, providing Putty to Stop Holes, etc. and applying One or More Coats of French Polish (best quility as approved) on Exposed Surfaces of CHAIR EASY (Drawing No. FD-229) to obtain a High Glossy Finish, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) REAR LEG for CHAIR DINNING (Drawing No. FD-279), made to shape and size including Taking out/down broken Rear Leg, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) FRONT LEG for CHAIR DINNING (Drawing No. FD-279), made to shape and size including Taking out/down broken Front Leg, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) SIDE RAIL/ FRONT RAIL/ BACK RAIL for CHAIR DINNING (Drawing No. FD-279), made to shape and size including Taking out/down broken Side Rail/ Front Rail/ Back Rail, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) STIFFNER (SIDE / CENTRAL ONE) for CHAIR DINNING (Drawing No. FD-279), made to shape and size including Taking out/down broken Stiffner (Side / Central One), complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) BACK REST for CHAIR DINNING (Drawing No. FD-279), made to shape and size including Taking out/down broken Back Rest, complete all and as directed by Engineer in Charge.

M&L for NYLON BUFFERS (Set of 4 No.) for CHAIR DINNING and fixing with Steel Screw on Legs including Taking out/down unserviceable Buffers, complete all and as directed by Engineer in Charge.

M&L for Removing wornout Canning to Seat a CHAIR DINING (Drawing No. FD-279), , weaving/ recanning with and including White Plastic Cane 2.0mm wide, half-round and 4.0mm wide on Borders in Godrej Pattern, complete all as shown in Drawings/ specified and as directed.

Preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots, scrubbing with Emery Paper to obtain a smooth surface, providing Putty to Stop Holes, etc. and applying two or More Coats of French Polish (best quility as approved) on Exposed Surfaces of Chair dining (Drawing No. FD-279) to obtain a High Glossy Finish, complete all as as specified and as directed.

M&L for First Class Hardwood (Shisham) REAR LEG for CHAIR WRITING (Drawing No. FD-280), made to shape and size including Taking out/down broken Rear Leg, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) FRONT LEG for CHAIR WRITING (Drawing No. FD-280), made to shape and size including Taking out/down broken Front Leg, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) SIDE RAIL/ FRONT RAIL/ BACK RAIL for CHAIR WRITING (Drawing No. FD-280), made to shape and size including Taking out/down broken Side Rail/ Front Rail/ Back Rail, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) STIFFNER (SIDE/CENTRAL ONE) for CHAIR WRITING (Drawing No. FD-280), made to shape and size including Taking out/down broken Stiffner (Side/ Central One), complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) ARM for CHAIR WRITING (Drawing No. FD-280), made to shape and size including Taking out/down broken Arm, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) BACK REST for CHAIR WRITING (Drawing No. FD-280), made to shape and size including Taking out/down broken Back Rest, complete all and as directed by Engineer in Charge.

M&L for NYLON BUFFERS (Set of 4 No.) for CHAIR WRITING (Drawing No. FD-280) and fixing with Steel Screw on Legs including Taking out/ down unserviceable Buffers, complete all and as directed by Engineer in Charge.

Preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots, scrubbing with Emery Paper to obtain a smooth surface, providing Putty to Stop Holes, etc. and applying One or More Coats of French Polish (best quility as approved) on Exposed Surfaces of CHAIR WRITING (Drawing No. FD-280) ) to obtain a High Glossy Finish, complete all as as specified and as directed.

M&L for Removing wornout Caning to Seat a CHAIR WRITING (Drawing No. FD-280) , weaving/ recaning with and including White Plastic Cane 2.0mm wide, half-round and 4.0mm wide on Borders in Godrej/ Gwalier Pattern, complete all as shown in Drawings/ specified and as directed.

M&L for Removing wornout Cane of Chair verandah (Drawing No. FD-359) weaving/ recaning with and including White Plastic Cane 5.0mm wide, half-round and 4.0mm wide on Borders in Godrej/ Gwalier Pattern, complete all as shown in Drawings/ specified and as directed.

S&F PVC HARD RUBBER SHOES (Set of 4 No.) for CHAIR VERANDAH (Drawing No. FD-359) and fixing on Legs including Taking out/down demaged Rubber Shoes, complete all as specified and as as directed.

M&L for for preparing Old Painted Steel Frame including Legs and Mild Steel Bar of CHAIR VERANDAH (Drawing No. FD-359) and applying Synthetic Enamel Paint (White Colour), complete all and as directed by Engineer in Charge.

S&F for FLEXIPUFF CUSHION FOAM (Drawing No.FD-373) 100mm thick, 32 density, covered with new Tapestory Cloth made to shape and size including removing demaged Cushion, complete all and as directed by Engineer in Charge.

Preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots, scrubbing with Emery Paper to obtain a smooth surface, providing Putty to Stop Holes, etc. and applying two or More Coats of French Polish (best quility as approved) on exposed surfaces of SOFA SET 5 SEATER (Drawing No. FD-373) to obtain a High Glossy Finish, complete all as as specified and as directed.

M&L for First Class Teak Wood FRONT LEG of SOFA SET (Drawing No. FD-281 & FD-373) Single Seater/ 3 Seater (Long Seat), made to Shape and Size including taking out existing, complete all and as directed by Engineer in Charge.

M&L for First Class Teak Wood REAR LEG of SOFA SET (Drawing No. FD-281 & FD-373) Single Seater/ 3 Seater (Long Seat), made to Shape and Size including taking out existing, complete all and as directed by Engineer in Charge.

M&L for First Class Teak Wood ARM of SOFA SET (Drawing No. FD-281 & FD-373) Single Seater/ 3 Seater (Long Seat), made to Shape and Size and including taking out existing, complete all as as specified and as directed.

S&F for CUSHION COVERSOFA SET (Drawing No. FD-281 & FD-373) Single Seater/ 3 Seater (Long Seat) of size 530x560mm, made out from Tapestory Cloth , complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) LEG of HEAD BOARD of BED PLYWOOD TOP (Drawing No. FD-246 & FD-247), made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for First Class Hardwood (Shisham) LEG of FOOT BOARD of BED PLYWOOD TOP (Drawing No. FD-246 & FD-247), made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for PLYWOOD TOP 1800x900mm in size, 12mm thick, 5 Ply, BWR Grade, ISI Marked, fixing with Steel Screws to BED PLYWOOD TOP (Drawing No. FD-246 & FD-247) and including taking out existing, complete all as as specified and as directed.

M&L for MILD STEEL PLATE 35x5mm in size, L-shape provided under Long Rail and Legs of Head Board and Foot Board for BED PLYWOOD TOP (Drawing No. FD-246 & FD-247) made to Shape and Size and fixing with Steel Screw and including taking out existing, complete all as as specified and as directed.

M&L for Letherisae Rexin for SOFA SET THREE SEATER (FD-TP), best quality (as approved) and including taking out existing, complete all and as directed by Engineer in Charge.

M&L for GLASS SHUTTER 5.0mm thick of TABLE DRESSING LADIES (Drawing No. FD-251) and including taking out existing, complete all and as directed by Engineer in Charge.

M&L for LOOKING MIRROR 5.0mm thick of TABLE DRESSING LADIES & MAP (Drawing No. FD-251 & FD/E6/MAP-II/07) including Repairing/ Jointing of Mirror Frame, made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for TOP of TABLE DRESSING LADIES (Drawing No. FD-251), made out of 18mm thick Block Board covered with 1.0mm thick Laminated Sheet Natural Teak Face shade and including taking out existing, complete all as as specified and as directed.

M&L for BOTTOM of TABLE DRESSING LADIES (Drawing No. FD-251), made out of 18mm thick Block Board and including taking out existing, complete all as as specified and as directed.

M&L for BACK PLY of BOX for TABLE DRESSING LADIES (Drawing No. FD-251), made out of 6mm thick Plywood, Commercial Face, including Key Plate and including taking out existing, complete all as as specified and as directed.

M&L for First Class Hardwood (Shisham) FRAME of MIRROR for TABLE DRESSING LADIES (Drawing No. FD-251), made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for First Class Hardwood (Shisham) LEG for TABLE DRESSING LADIES (Drawing No. FD-251), made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for DRAWER to TABLE DRESSING LADIES (Drawing No. FD-251 & FD/E6/MAP-II/07), made out of 18mm thick Block Board, 6.0mm thick Ply to Drawer's Bottom and Front of Drawers covered with 1.0mm thick Laminated Sheet Teak Face shade including Aluminium anodise Knob (Dark Black) and including taking out existing, complete all and as directed by Engineer in Charge.

S&F in repair LOOKING MIRROR 5.0mm thick of TABLE DRESSING GENTS (Drawing No. FD-230), complete all as as specified and as directed.

M&L for TOP of TABLE DRESSING GENTS (Drawing No. FD-230), made out of 18mm thick Block Board covered with 1.0mm thick Laminated Sheet Natural Teak Face shade and including taking out existing, complete all and as directed by Engineer in Charge.

M&L for BOTTOM of TABLE DRESSING GENTS (Drawing No. FD-230), made out of 18mm thick Block Board and including taking out existing, complete all as as specified and as directed.

M&L for BACK PLY of BOX for TABLE DRESSING GENTS (Drawing No. FD-230), made out of 6mm thick Plywood, Commercial Face, including Key Plate and including taking out existing, complete all and as directed by Engineer in Charge.

M&L for SIDE of TABLE DRESSING GENTS (Drawing No. FD-230), made out of 12mm thick Ply Board, Commercial Face, ISI marked and including taking out existing, complete all as as specified and as directed.

M&L for DRAWER to TABLE DRESSING GENTS (Drawing No. FD-230), made out of 18mm thick Block Board, 6.0mm thick Ply to Drawer's Bottom and Front of Drawers covered with 1.0mm thick Laminated Sheet Teak Face Shade including Aluminium anodise Knob (Dark Black) and including taking out existing, complete all and as directed by Engineer in Charge.

M&L for BOTTOM of SIDE BOARD (Drawing No. FD-241), made out of 18mm thick Block Board and including taking out existing, complete all and as directed by Engineer in Charge.

M&L for DRAWER of SIDE BOARD (Drawing No. FD-241), made out of 18mm thick Block Board with 6.0mm thick Plywood Board as Drawer Bottom including Knob and including taking out existing, complete all and as directed by Engineer in Charge.

M&L for SHELF of SIDE BOARD (Drawing No. FD-241), made out of 18mm thick Block Board Both Side laminated with 6.0mm thick Teak Wood Beading fixing with Steel Screw and including taking out existing, complete all and as directed by Engineer in Charge.

M&L for steel handle of SIDE BOARD (Drawing No. FD-241), fixing with Steel Screw and including taking out existing, complete all and as directed by Engineer in Charge.

M&L for TOP of TABLE BED SIDE (Drawing No. FD-210 & FD-276) made out of 19mm thick Prelaminated Particle Board Natural Teak Face shade and including taking out existing, complete all and as directed by Engineer in Charge.

M&L for SIDE of TABLE BED SIDE (Drawing No. FD-210 & FD-276) made out of 19mm thick Prelaminated Particle Board Natural Teak Face shade and including taking out existing, complete all and as directed by Engineer in Charge.

M&L for BACK of TABLE BED SIDE (Drawing No. FD-210 & FD-276) made out of 6.0mm thick Ply Commercial Face and including taking out existing, complete all and as directed by Engineer in Charge.

M&L for SHELF of TABLE BED SIDE (Drawing No. FD-210 & FD-276) made out of 12mm thick Prelaminated Particle Board Teak Face shade including 6.0mm thick Teak Wood Edging fixing with Steel Screw to Front Side and including taking out existing, complete all and as directed by Engineer in Charge.

M&L for TOP of TABLE CENTRE (Drawing No. FD-274) of size 900x450 mm made out of 19mm thick Prelaminated Particle Board Natural Teak face shade including 6.0mm thick Teak Wood Edging fixing with Steel Screw alround and including taking out existing, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) LEG of TABLE CENTRE (Drawing No. FD-274) made to Shape and Size and including taking out existing, complete all and as directed by Engineer in Charge.

Preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One or More Coats of French Polish (best quility as approved) on Exposed Surfaces of TABLE CENTRE of size 900x450 & 1200x600mm (Drawing No. FD-274) except on Top Plywood to obtain a High Glossy Finish, complete all as as specified and as directed.

M&L for Glass Top 8.0mm thick Brown Colour duly grinded all round for TABLE CENTRE GLASS (Drawing No. FD-375) made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for First Class Hardwood (Shisham) LEG of TABLE WRITING (Drawing No. FD-249 & FD-275) made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for TOP of TABLE WRITING (Drawing No. FD-249 & FD-275) made out of 18mm thick Block Board covered with 1.0mm thick Laminated Sheet Natural Teak Face shade including 6.0mm thick Teak Wood Edging fixing with Steel Screw alround and including taking out existing, complete all as as specified and as directed.

M&L for DRAWER of TABLE WRITING (Drawing No. FD-249 & FD-275) made out of 19mm thick Prelaminated Particle Board Teak Face with 6.0mm thick Ply to Bottom of Drawers including Aluminium Anodised Knob and including taking out existing, complete all as as specified and as directed.

S&F in repair Knob of TABLE WRITING (Drawing No. FD-249 & FD-275) m fixing with Steel Screw alround , complete all as as specified and as directed.

M&L for preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One or More Coats of French Polish (best quility as approved) on Exposed Surfaces of TABLE WRITING (Drawing No. FD-249 & FD-275) except on Top Plywood to obtain a High Glossy Finish, complete all as as specified and as directed.

M&L for CUP BOARD WITH SHUTTER of TABLE WRITING (Drawing No. FD-249 & FD-275) made out of 18mm thick Block Board covered with 1.0mm thick Laminated Sheet, 6.0mm thick Teak Face Plywood to Back Side including Wall Catcher and including taking out existing, complete all as as specified and as directed.

M&L for TOP of TABLE WITH/WITHOUT DRAWER 900x600x760 mm (Drawing No. FD-224 & FD-284) made out of 19mm thick Prelaminated Particle Board Natural Teak Face shade including 6.0mm thick Teak Wood Edging fixing with Steel Screw alround and including taking out existing, complete all as as specified and as directed.

M&L for TOP of TEAPOY (Drawing No. FD-232 & FD-278), made out of 19mm thick Prelaminated Particle Board Natural Teak Face shade including 6.0mm thick Teak Wood Edging alround and including taking out existing, complete all as as specified and as directed.

M&L for First Class Hardwood (Shisham) LEG of TEAPOY (Drawing No. FD-232 & FD-278), made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for First Class Hardwood (Shisham) LONG BATTEN of TEAPOY (Drawing No. FD-232 & FD-278), made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for First Class Hardwood (Shisham) SHORT BATTEN of TEAPOY (Drawing No. FD-232 & FD-278), made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One or More Coats of French Polish (best quility as approved) on Exposed Surfaces of TEAPOY (Drawing No. FD-232 & FD-278) except on Top Plywood to obtain a High Glossy Finish, complete all as as specified and as directed.

M&L for TOP of PEG TABLE (Drawing No. FD-236 & FD-277) made out of 19mm thick Prelaminated Particle Board Natural Teak Face shade including 6.0mm thick Teak Wood Edging fixing with Steel Screw alround and including taking out existing, complete all as as specified and as directed.

M&L for First Class Hardwood (Shisham) LEG of PEG TABLE (Drawing No. FD-236 & FD-277) made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for First Class Hardwood (Shisham) LONG BATTEN of PEG TABLE (Drawing No. FD-236 & FD-277) made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for First Class Hardwood (Shisham) SHORT BATTEN of PEG TABLE (Drawing No. FD-236 & FD-277) made to Shape and Size and including taking out existing, complete all as as specified and as directed.

Preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One or More Coats of French Polish (best quility as approved) on Exposed Surfaces of TABLE PEG (Drawing No. FD-236 & FD-277) except on Top Plywood to obtain a High Glossy Finish, complete all as as specified and as directed.

M&L for TOP of TABLE DINNING 6 PERSONS (Drawing No. FD-273) made out from 19mm thick Prelaminated Particle Board Natural Teak Face shade including 6.0mm thick Teak Wood Edging fixing with Steel Screw alround and including taking out existing, complete all as as specified and as directed.

M&L for First Class Hardwood (Shisham) LEG of TABLE DINNING 6/8 PERSONS (Drawing No. FD-273) made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for TOP made from 19mm thick Prelaminated Particle Board including Beading 4.0mm thick of TABLE COMPUTER (Drawing No. FD/E6/MAP-03), made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for KEY BOARD TREY made from 19mm thick Prelaminated Particle Board fitted with suitable Telescopic Channel including Beading 4.0mm thick for TABLE COMPUTER (Drawing No. FD/E6/MAP-03), made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for DRAWER made from 19mm thick Prelaminated Particle Board including Beading 4.0mm thick of TABLE COMPUTER (Drawing No. FD/E6/MAP-03), made to Shape and Size and including taking out existing, complete all as as specified and as directed.

M&L for SHELF made from 19mm thick Prelaminated Particle Board including Beading 4.0mm thick of TABLE COMPUTER (Drawing No. FD/E6/MAP-03), made to Shape and Size and including taking out existing, complete all as as specified and as directed.

S&F in repair HARD RUBBER SHOES of TABLE COMPUTER (Drawing No. FD/E6/MAP-03), made to Shape and Size, complete all as as specified and as directed.

Preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One or More Coats of French Polish (best quility as approved) on Exposed Surfaces of TABLE DRESSING LADIES (Drawing No. FD-251) except on Top Plywood to obtain a High Glossy Finish, complete all as as specified and as directed.

Preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One or More Coats of French Polish (best quility as approved) on Exposed Surfaces of TABLE DRESSING GENTS (Drawing No. FD-230) except on Top Plywood to obtain a High Glossy Finish, complete all as as specified and as directed.

Preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One or More Coats of French Polish (best quility as approved) on Exposed Surfaces of TABLE DINNING 6/8 PERSONS (Drawing No. FD-273) except on Top Plywood to obtain a High Glossy Finish, complete all as as specified and as directed.

Preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One or More Coats of French Polish (best quility as approved) on Exposed Surfaces of SIDE BOARD (Drawing No. FD-241) except on Top Plywood to obtain a High Glossy Finish, complete all as as specified and as directed.

Preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying two or More Coats of French Polish (best quility as approved) on Exposed Surfaces of BED PLYWOOD TOP (Drawing No. FD-246 & FD-247) except on Top Plywood to obtain a High Glossy Finish, complete all as as specified and as directed.

Preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying two or More Coats of French Polish (best quility as approved) on Exposed Surfaces of CHAIR DINING CUSHIONED (Drawing No. FD/E6/MAP/10(R)) to obtain a High Glossy Finish, complete all as as specified and as directed.

M&L for First Class Hardwood (Shisham) FRONT LEG for CHAIR DINING CUSHIONED (Drawing No. FD/E6/MAP/ 10(R)), made to shape and size including taking out broken Rear Leg, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) REAR LEG for CHAIR DINING CUSHIONED (Drawing No. FD/E6/MAP/ 10(R)), made to shape and size including taking out broken Rear Leg, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) SIDE/ FRONT/ BACK RAIL for CHAIR DINING CUSHIONED (Drawing No. FD/E6/MAP/ 10(R)), made to shape and size including taking out broken Side/ Front/ Back Rail, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) BACK REST (HORIZONTAL & VERTICAL STRIP) for CHAIR DINING CUSHIONED (Drawing No. FD/E6/MAP/10(R)), made to shape and size including taking out broken Back Rest, complete all and as directed by Engineer in Charge.

M&L for First Class Hardwood (Shisham) STIFFNER (SIDE & CENTRAL ONE) for CHAIR DINING CUSHIONED (Drawing No. FD/E6/MAP/10(R)), made to shape and size including taking out broken Stiffner, complete all and as directed by Engineer in Charge.

S&F SEAT CUSHION 75mm thick for CHAIR DINING CUSHIONED (Drawing No. FD/E6/MAP/10(R)), 32 density, covered with new Tapestory Cloth (not less than Rs. 250.00 per RM) fixing on 12mm thick Plywood including taking out unserviceable Seat Cushion, complete all and as directed by Engineer in Charge.

S&F COVER CUSHION for CHAIR DINING CUSHIONED (Drawing No. FD/E6/MAP/10(R)) 32 density, covered with new Tapestory Cloth (not less than Rs. 250.00 per RM) made to shape and size including taking out unserviceable Cover Cushion, complete all and as directed by Engineer in Charge.

M&L for NYLON BUFFERS (Set of 4 No.) for CHAIR DINING CUSHIONED (Drawing No. FD/E6/MAP/10(R)) and fixing with Steel Screw on Legs including taking out unserviceable Buffers, complete all and as directed by Engineer in Charge.

M&L for Marble top of siize 950x950mm of 20mm thick for Table cook house marble top (Drawing No FD-136(M) including taking out existing, complete all as as specified and as directed.

M&L for top of hat stanad made out from teak wood (Drawng no FD-362 , FD-233) , including taking out unserviceable top complete all and as directed by Engineer in Charge.

S&F in repair Aluminum Hook for hat stand (Drawng no FD-362,,FD-233),complete all and as directed by Engineer in Charge.

S&F in repair looking mirror of size 400x250mm 5 mm thick (Drawng no FD-362, FD-233), complete all and as directed by Engineer in Charge.

KARAM CHAND KRISHAN LAL