REPAIR/REPLACEMENT OF LT PANELS, UG CABLES,

Amount

Contract Details

Disconnecting and taking out the old existing globe/gate light fitting of any description and in any position from poles/walls/pillars etc. complete and supplying & fixing , connecting and testing Decorative gate light made up of high grade unbreakable polycarbonate material suitable for and including retrofit CFL upto 1x14 W, LED lamp B22-Moon 200 Base other accessories making connection to feeders/ main switch with and including ISI marked two single core PVC insulated copper conductor flexible cable of size 2.5 sqmm complete all as specified and as directed . Make-Havells,Odering code-LHFXBON11TN6F035or equivalent mode of Make-Bajaj/Philips

Material and labour Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead strip of size 32x6 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel,concrete PCC (1:3:6) type C1, Pre cast RCC (1:2:4) type B1 cover slab of size 70x70 x 10 cm including one handle for lifting made out of 10 mm dia TMT Bar all as shown in electrical plate No. 3 connected to earthing test point, protected by GI pipe 40 mm dia light grade, watering GI pipe 20 mm dia (Medium grade) with wire mesh, funnel, including alternate layer of charcoal or coke and salt all around the elecatrode, necessary excavationa and earth work all as specified or directed including testing on completion.

Disconnecting and taking up or down old existing GI tubing and connections including connected fittings/ accessories and fixtures of any descriptions/ grade and in any position in trenches/ under floors/roads/ on walls etc and making good the distrubed surfaces complete all as specified and as directed for the following sizes

25 mm bore

50 mm bore

Refixing old steel tubing and connections in new or old position (walls, ceilings, floor etc after cleaning of pipe making all threads complete all as specified and directed for the following sizes:-

25 mm bore

50 mm bore

Supply, fixing, laying, jointing & testing of galvanised iron water tubing 'Medium Grade' conforming to IS-1239 with and including all GI fittings such as unions, reducers sockets,socket reducing bends, elbows, tee, checknuts, caps, plugs etc as required complete fixed to walls and ceilings, laid in trenches/ under floor/ under road or floors complete all as specified and directed for the following sizes :-

25 mm bore

50 mm bore

Disconnecting taking out old unserviceable gate/globe valve of any sizes supply and fixing, jointing and testing gun metal gate/glove valve with iron wheel head,both end screwed for iron pipe complete all as specifed and as directed of the following size :-

25 mm dia

50 mm dia

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in soft/loose soil including forming sides and bottom surfaces to required levels/slops/gradients etc. all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in the excavated soil in layers not exceeding 25 cm thick complete all specified and as directed.

Removal of surplus excavated soil to distance not exc. 50 mtrs distance and deposited as directed at a level not exceeding 1.5 mtrs above starting point complete all as specified and as directed.

Taking out carefully aluminium point wiring for one light,socket or power point etc. incl all fittings such as switches, sockets, holders, light fittings, fan regulators etc. and making good the distrubed surfaces of wal and ceiling complete.

M&L for point wiring with 1.5 sqmm (nominal cross section area) PVC insulatd unsheathed single core copper cable working voltage 1100 volts grade confirming to IS -694 with stranded copper conductor in including PVC rigid non metalic 25 mm dia PVC cashing caping including MS shunk box 3 mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sqmm (nominal cross secrional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuty cdonductor connected to main switches/DBs or common earth dolly complete all as specified and as directed for following :-

One light popint controlled by one one way switch 5/6 amps

One socket out let 5/6 Amps point on the independent board

One socket out let 5/6 Amps point on the same board

As per Item No 12 above but wiring with 4 sqmm single core copper conductor or one socket out let 15/16 Amps point on the independent board.

S&F switch piano, flush type, single pole one way 5 amps complete all as specified and as directed

S&F socket out let 2 in 1, 3 pin 5A, flush type complete all as specified

S&F switch piano, flush type, single pole one way 15 amps complete all as specified and as directed

S&F socket out let 2 in 1, 5 pin 5 Amps and 15 Amp , flush type complete all as specified

S&F ceiling rose 3 phase PVC/polycarbonate, isolated body complete all as specified

S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fitting isolated body complete all as specified

S&F in repair of surface and wall mounted Decorative ultra slim aluminium square profile LED light fixture with high lumen output,environmental friendly, energy efficient 22 watt including LED Lamp type 22WLED6500K of Make-Havells,Odering Code-LHEXBTP7IN1S022 or equivalent Cat No of Make-Bajaj/Philips

S&F LED bulb 7 LED adore B22 CDL Ball Lamp complete all as specified.Make-Havells,Odering Code-LHLDERUEEML8R007 or equivalent Cat No of Make-Philips/Bajaj

Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract.

om enterprises