COMPREHENSIVE MAINT OF MISC B/R REPAIRS AND CLEANING/ DESLUDGING OF SEWAGE LINE, SEPTIC TANK, MANHOLES COVERS , NANHOLES, SUMPS, SEPTIC TANK/ SOAKAGE WELLS , REPAIR/ MAINT OF FOOTPATH, PCC PAVING, COMPOUND WALL, FENCING, DRAIN, CULVERT OFF NEW OPD

Amount

S&F in repair 10 mm thick Toughened glass as in partition/ fixed window including diamond edging all sided, eatching, lining and momnograme area not exc 0.50 Sqm each by sand blasting, including CP " L" or " U" heavy duty clamps suitable for fixing of glass, min 4 mos per sqm complete all as specified and directed.

S&F in repair 10 mm thick toughened frosted glass door shutters of size area exc 1.50 Sqm but not exc 3 Sqm, including necessary floor spring hydraulically regulated, otherside fixed on pivot CP fittings and fixtures, CP handles, CP locking arrangement, necessary cutting & holes moulding and fixed in complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

S&F 35mm thick pre-laminated designer factory made flush shutter of laminate or equivaqlent including necessary hardware and fittings complete all as specified and directed.

M&L for factory made 100% solid wood plasticcomposite(WPC) Door frame of size 65 X 32 mm with density 780 kg/Cum Make Rajshree or equivalent complete all as specified and directed.

M&L Fibre galss reinforced plastic (FRP) door frames shall be three lagged of cross section 90mm x 45 mm having single rebate of 32mm x 15mm to receive shutter of 30 mm thickness. The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. MS stay shall be provided at the bottom to steady the frame complete all as specified and directed.

M&L FRP door shutter shall be 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufactures. Made with fire retardant grade unsaturated polyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP panels and confirming to IS 14856-2000”.including necessary hardware and fittings complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed.

M&L for Vitrified Ceramic coloured tiles 10 mm thick (square/rectengular) polished, size of each tiles is 800x800mm as in floors, over 15 mm thick screed bed in CM 1:4 and joint shall be kept as 3mm filled with epoxy to attain the best result 3mm thick tile spacers to be used, Masking tape shall be put before putting the eposy grout & the grout shall be throughly cleaned immendiatly complete all as specified and directed.

M&L for glazed coloured ceramic tiles in dado/vertical surface (450mm x600mm x 7-8 mm) thick fixed with chemical adhesive Fevi Mate of euivalent and joint shall be kept as 3mm filled with epoxy. to attain the best result 3mm thick tile spacers to be used,Masking tape shall be put before putting the eposy grout & the grout shall be throughly cleaned immendiatly complete all as specified and directed.

M&L for Non skid coloured ceramic tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface,including 15 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for glazed coloured ceramic tiles in dado/vertical surface (450mmx 300mm x 7mm) thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10 mm thick in cement mortar 1:3 even and fair for receving tiles on vertical surface complete all as specified and directed.

Attending day to day complaints, adjustment & repairs / replacement of all joinery fittings, brass butt hinges, hydraulically regulated door closer, brass mortice lock, night latch, finger plate, kick plate, door stopper, aluminium D type handles, tower bolts, hasp & staple, sliding door bolt, glass door spring, aluminium door lock, aluminium door pivots etc, repairs to aluminium doors / windows / and partition complete all as specified and as directed.

Attending day to day complaints in adjustment & repairs / replacement of all sanitary fittings, plumbing items leaking to stop cock, bib tap, swan neck tap, pillar tap, gate valve, PVC connection, CP connection, CP 2 way and 3 way connection of auto flush for urinals from union, spreader etc by replacing the worn out rubber / PVC washer, making fully functional the leaking flushing cistern single / double syphonic type of any description of any size, taking down carefully chromium plated bottle trap, waste coupling, PVC / GI Waste pipe of size 32 / 40 mm dia waste water connection to WHB / urinals etc and removing all accumulated materials from the trap etc, cleaning properly and refixing in the same position complete all as specified and as directed.

Notes for Item Nos 14.00 & 1500:- (i) Adequate tradesmen along with supporting manpower & Helper shall be deployed by contractor for attending complaint on day to day bases. The complaints received up to 1300 Hrs shall be attended on the same day. The complaints received after 1300 Hrs shall be attended on Next day before 1300 Hrs. If complaints shall not attended as per schedule, a recovery of Rs. 200/- per complaint per day shall be imposed from contractor's dues. (ii) The contractor shall deploy adequate supervisory manpower to note down and monitoring the complaints on all working days including Saturdays with all necessary stationery such as Complaint Slip book, Complaint Register, attendance register etc. to maintain day to day complaints. (iii) The quoted rates shall includes cost of T & P, stationery, complaint slip Book, Complaint Register, Attendance Register & petty materials for repairs like Nails, Screws, Fevicol etc complete. (iv) The material required shall be paid as "Supply only" under respective item of this Schedule. (v) The police verification of the employees shall be got done by the contractor and shall be submitted to the Engr-in-Charge along with other documents at the time of approval of Manpower/ immediately after commencement of work. (vi) The contractor shall submit the proof of payments made to labourers i.e. Passbook/ Bank Statement of his firm to Engr-in-Charge for verification before at the time of submission of each RAR.

Supply only in replacement Fixing False ceiling tile with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 475 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level complete all specified and directed.

Supply only in replacement floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140mm size overall.

Supply only in replacement Aluminium extruded section body door closer, hydraulically regulated, design No 2, universal type, suitable for door shutter 701 mm to 850 mm in width and of weight 36 to 60 Kg each complete all as specified and as directed.

Supply only in replacement Double action floor spring, hydraulically regulated, made out of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty and fixed complete for glass/aluminium door complete all as specified and as directed.

Supply only in replacement brass mortice lock 65 mm 4 lever vertical type with duplicate key and handle set complete all as specified and as directed.

Supply only in replacement brass mortice lock 100 mm, 4 lever, vertical type, with duplicate key complete all as specified and as directed.

Supply only in replacement 150mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.

Supply only in replacement 150 mm Aluminium handles, cast type anodised complete all as specified and directed.

Supply and fixing of stainless steel butt hinges medium weight 100 mm long fixed to frame as required complete all as specified.

Supply only in replacement aluminium alloy,anodised,sliding door bolt plate type 250 mm long and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S&F in repair 20 mm dia decorative drapary curtain road with bibs, braked & internal funnels complete all as specified.

Supply only in replacement of polished Bottom lock of glass door complete al as specified and directed.

Hacking out old broken glass (any description, thickness, size, quality), from metal frame/aluminium frames including punching or drilling out old glazing pins complete all as specified & as directed.

S&F 5.5mm thick sheet glass, ordinary quality not exc 0.5 Sqm in each pane and glazing with oil putty/ rubber beading as required complete all as specified & directed.

Supply only in replacement brass drawer lock, 65 mm, 2 lever, with duplicate key complete all as specified and as directed.

Supply only in replacement Stainless steel drawer channel, 300mm length complete all as specified and as directed.

Supply only in replacement Stainless steel drawer channel, 450mm length complete all as specified and as directed.

Supply only in replacement Brass drawer handles, projection drop (50mm to 65mm) on screwed platecomplete all as specified and as directed.

S & F in repair Vitreous china wash down water closet pan (pedestal pattern), floor mounted with inbuilt P trap in white colour, including connection to trap and to flushing pipe including provn of cement concret beading complete all as specified and directed.

Supply only in replacement plastic water closet seat cover white, closed pattern with flat bottom and mild steel chromium plated hinging device complete all as directed and as specified.

Supply only in replacement of 32/ 40 mm dia PVC waste pipe for WHB/ sink complete all as specified.

Supply only in replacement of PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete.

Supply only in replacement of Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodized, fixed with rawl plugs. all as specified.

Supply only in replacement 600mm Long PVC connection suitable for 15mm bore pipes complete all as specified and as directed.

S&F in repair Table top wash basin, white, flat back size 525x415x140mm of make -Jaquar cat part No JDS-WHM-25907N or equvalent excluding tap, chain, plug but including brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin,with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified.

Supply only in replacemtn of 15 mm Quarter turn basin mixer without Popup waste system with 357mm Long braded hoses of make Jaquar cat part No-ALI-85001 or equvalent for fixing hot & cold waterscrewed down for iron pipe and fixed all as specified and as directed.

S&F in repair vitreous china Squatting pan "Orissa pattern" size 580x440xmm white, with integral foot rest incl p trap and necessary connection to trap and flushing pipe etc complete all as specified and directed.

Supply only in replacement of repair fancy type stop valve make of jaquar or equivalent copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm complete all as specified.

Supply only in replacement of Quarter turn Bib tap make of jauar cat part No ALI-85037 with wall flange or equvalent for iron pipe of size 15mm bore chromium plated complete all as specified.

Supply only in replacement of Ball Brass Valve high pressure with polythine coat and fly nut complete screwed for Iron pipe or brass ferrule and fixed of size 25mm bore complete all as specified.

S&F in repair of rotational moulded polyethylene water storage tanks in three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories complete all as specified.

Supply only in replacement of Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm.

Supply only in replacement of Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm.

Supply only in replacement 2 in 1 Angle Valve 15 mm CP fancy pattern type cast copper alloy make of jaquar or equivalentscrewed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply only in replacement Angle Valve 15 mm CP fancy type cast copper alloy make of jaquar or equivalent screwed for iron pipe or forbrass ferrule and fixed complete all as specified

Supply only in replacement CP hand spray (health facucet with 1.5 M long easy flex tube in chrome finish and wall hook) make of jaquar or equivalent complete all as specified and directed.

Supply only in replacement of chromium plated jet for WC with 1.00 M long pipe including necessary fittings complete all as specified and directed.

S&F in repair Vitreous China half stall urinals, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. incl of fixing supply pipe to flushing cistern, trap and waste pipe).

S&F in repair Urinal Spreader of CP White colour fixing to 15 mm bore pipe.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store.

Taking up or down 20 mm bore steel water tubing and connections including cleaning or refixing or removal to store.

M&L 15mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

M&L 20 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

S&F in repair white, vitreous china, battery based, infrared sensor operated urinal of approx size 710x 485x310mm having pre & post flushing with water, including fixing to walls complete all as specified & as directed. Make : Jaquar Cat No URS-WHT-13255 & SNR-CHR-51097 or equivalent model of GROHE/KEROVIT (Kajaria)

Supply only in replacement chromium plated, brass, sensotronic sensor faucet for Wash Hand Basin (swan neck) screwed for 15mm bore iron pipe and fixed complete all as specified and as directed. Make – Jaquar Cat No. SNR-CHR-51011 or equivalent model of GROHE/KEROVIT (Kajaria)

Supply only in replacement Stainless steel glass door handle 600mm long with screw complete all as specified and directed.

M&L for cleaning of gully traps of any size and removing sludge waste material etc to a distance not exc 50m and burying in pits and refilling the same complete all as specified and directed by Engr-in-Charge. Note: The cost for excavation and earth work for pits is deemed to be included in the unit rate.

M&L for cleaning of floor traps and waste material to a distance not exc 50m and burying in pits and refilling the same complete all as specified and directed by Engr-in Charge. Note: The cost for excavation and earth work for pits is deemed to be included in the unit rate.

M&L for cleaning of water closet blocks and waste material to a distance not exc 50m and burying in pits and refilling the same complete all as specified and directed by Engr-in-Charge. Note: The complaint shall be cleared with in 24 hrs after intimation to contractor if not then recovery @ shall be levied on contractor.

Cleaning of sewage pipe by rodding upto 150 mm internal dia at any depth and removal of sludge/ silt / liquid / mud and sand etc (in foul position) to out side the MD premises including provisioning of water, bamboo, etc complete all as specified and directed.

Cleaning manholes of any size upto 1.50 mtr in depth and removal of sludge / slit / mud and sand etc (in foul position) to out side the MD premises complete all as specified and directed.

M&L for cleaning of manholes/Septic tanks/soackage pits/etc of any size and depth by hydraulic operated high pressure suction sewer cleaning machine having suitable tank cap incl skilled driver operator & labour and removal of sludge / silt / liquid / mud in foul position and disposing the same out side MD premises complete all as specified and directed.

M&L for cleaning of chocked sewar line of dia 100 mm to 300 mm in any depth by hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of 3000 ltrs and 260 LPM with min 145 bar, suction flow of 10200 LPM incl skilled driver & operator supervising Engineer for cleaning of chocked sewer line including providing water for jetting and removal of sludge/silt/liquid / mud and sand (in foul position) etc out side the MD Premises all as specified and as directed.

Excavation in trenches not exc 1.50 mtr wide or 10 sqm on plan, 1.50 mtr in depth for manholes & sewage lines, drain, etc and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in including spreading levelling, watering and well ramming in layers not exc 25 cm thick in any type of soil complete all as specified and directed.

M&L for removing excavated soil to a distance exc 500 mtr and not exc 1.0 km and depositing where directed complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed stoneware)/ PVC set in cement mortar 150 mm internal dia of pipe complete all as specified and directed.

Dismantling of 300 mm reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required.

S&F Salt glazed stone ware pipes laid and jointed complete with collars ware drain pipes laid in trenches and jointed internal dia of pipe150 mm complete all as specified and directed.

M&L cement mortar concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing under, and haunching against the sides of of pipe 150 mm dia complete all as specified and directed.

M&L for Reinforced cocrete pipe 300mm dia, class NP-3 laid and jointed complete with collars.

M&L for concrete bed to drain pipes 300mm dia type 1:3:6 C-2 including paking under and haunching against the sides of pipes after they are laid and tested.

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan not exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Demolation of Cement Concrete of any description and in any position not otherwise specifically provided for

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in subbase, foundation, filling & mass concrete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (40 mm graded aggregate) as in drain/Channal and mass concrete complete all as specified and directed.

M&L , PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs benching, bed plates, hanching and coping all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C1, using (20mm graded aggregate) as in Plinth protection and finished the surface fair & even without using extra cement, laid in panel, including filling the joints with sand mixed with bitumen in 1:1 ration complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key scrubbing down with water etc, complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1 : 6 on fair faces of brick work or on concrete surfaces finished fair and even without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in 1:4 cement mortar on fair faces of brick work finished even and fair complete all as specified & directed.

Cutting into existing manholes for connecting new mains pipe making good to pipes rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finish and reforming benching as required, internal dia of pipe 150 mm dia complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons etc.

M&L for 80 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006, M-40 Grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for cement concrete rich colored chequered tiles machine pressed with imported pigment finish (mirror/rough cast) of size 300mmx300mmx(20 to 25 mm) tcick set and jointed with neat cement slurry, over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

S&F in repair Kerb stone of 300x300x 100mm thick precasted plain cement concrete type B0, 1:2:4 , using 12.5mm graded crushed stone aggregate incl earth work for laying kerb stones.

Dismantling posts or struts embedded in Concrete (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

Dismantling fencing wiremesh any type all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F for steel section for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

M&L for framed work such as grills grating, etc with ends of bars shouldered and /or riveted for forged into spikes framed guard bars, barred iron doors ladders framed balusters, walk ways, railings framework of water tanks and similar work conforming to Fe-290, Gde-E-165 all as directed by the Engr-in-Charge.

M & L for PCC 1:2:4 type B2 40 mm graged agg in Posts, pillar, walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified.

S&F Chain link fencing with dia of wire 3.14 mm and size of mess 75mm x 75mm complete as approved by Engr-in-Charge.

S&F mild steel screw bolts 11 to 15 mm dia of neck (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exc 10 cm not exc 15cm long.

M&L TMT bars 10 mm dia and over cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete.

M&L for two coats of synthetic enamel paint on new steel surfaces of any description exc 10cm in width or girth including preparation over a coat of red oxide Zinc chrome primer.

M&L for two coat of Synthetic enamel pait on new steel surfaces of any description, n.exc 10cm in width or girth including preparation over a coat of red oxide Zink chrome primer complete all as specified and directed.

S&Fin repair precast cement concrete louvres and jallies 25 mm thick type B0 1:2:4, set in CM 1:6 (mea sured solid), including all mould- ings cmplete all as specified and directed.

M&L for applying one coats of cement base paint after preparation of old surfaces complete all as specifed.

M&L for preparation of newly plastered surfaces and applying two coats of cement based paint complete all as specified and as directed.

De-sludging/ De-mucking old surface channels/ drains of depth up to 0.45m and any section or width including removing/refixing drain cover of any shape and size and spreading the Sludge/muck outside MOD land complete all as specified and as directed. (Note: Cost of De-sludging/dumucking shall includes for foul condition with foul smell)

S& F in repair 75mm thick factory made SFRC manhole/ drain covers of approved shape & size complete all as specified and as directed. Make : Polycrete or equivalent.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc shall be measured and paid separately) and making good disturbed surfaces of wall floor etc complete all as specified and as directed.

M&L point wiring for modular switches with 1.5 Sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, drawn through PVC concealed Conduit of 20 mm dia and, rigid non-metallic or as per site requirement with all fittings, including cadmium plated screws as per IS, including 1.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, suitable for One light/fan/bell point controlled by one No, 5 Amp, one way switch/bell push complete all as specified and as directed.

All as per item No. 113.00 here-in-before but for one three pin, 5 Amp, socket out let on independent board complete all as specified and as directed.

All as per item No. 113.00 here-in-before but for one three pin, 5 Amp, socket out let on same board complete all as specified and as directed.

All as per item No. 113.00 here-in-before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor complete all as specified and as directed.

All as per item No. 113.00 here-in-before but point wiring with 4 Sqmm, multistranded, copper conductor cable, for AC point on independent board with 4 Sqmm size earth conductor complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 1 or 2 module complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 3 modules complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 4 modules complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 6 modules complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 8 modules complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 12 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 1 or 2 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 3 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 4 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 6 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 8 modules complete all as specified and as directed.

S&F in replacement module metal flush box, 12 modules complete all as specified and as directed.

S&F in replacement modular switch, 1 way, 6 Amp, 1 Module, complete all as specified and as directed.

S&F in replacement modular bell push, 6 Amp, 1 Module complete all as specified and as directed.

S&F in replacement modular Socket, 6Amp, 2/3 Pin, combined, 2 module complete all as specified and as directed.

S&F in replacement modular switch, 1 way, 16 Amp, 1 Module, complete all as specified and as directed.

S&F in replacement modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 module complete all as specified and as directed.

S&F in replacement modular Fan step regulator, 120W - 1 module complete all as specified and as directed.

S&F in replacement Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt, fixed in position & connecting complete all as specified and as directed.

S&F in replacement Bell ding dong, AC, 230 Volts, fixed in position & connecting complete all as specified and as directed.

S&F in replacement sub main wiring with 2 runs of 4 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 20 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 4 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length.

S&F in replacement sub main wiring with 2 runs of 6 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 6 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length.

S&F in repair load line, distribution board, double door type, TPN, vertical, 4 way, suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed.

S&F in repair for distribution board double door type, SPN, 12 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S&F in repair for distribution board double door type, SPN, 8 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

Supply, fixing and connecting in replacement recessed Type, Full window, opal Diffuser, Ultra modern, slim LED Panel 2x2, 36W, size 595X595mm (Nominal), suitable for Existing false ceiling, with CRCA powder coated White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 3KV, safety & performance test as per IS:15885 Part 2/Sec, Total system Lumen not less than 4200, in Cool day Light (5700K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours, complete with all accessories as required complete all as specified and as directed. Make - Havells Cat Part No. - PLANO2X2PLR36WLED857S /Polycab/CG

Supply, fixing and connecting in replacement of Surface/Wall Mounted 10W integrated LED 2 feet Fitting with Epoxy powder coated white polycarbonate channel housing. Total system Lumen of 10W Led should be 800 or above in Cool day Light(6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>100 Lm/w, THD(%) < 20, Complete with all accessories as required with connections. Make - Havells Cat Part No -LUMILINEBS10WLED865SPCWH/ Wipro/ Philips.

Supply, fixing and connecting in replacement of Surface/Wall Mounted integrated LED 4 feet Fitting of not more than 20w with polycorbonate housing & opal diffuser finish , Integral electronic driver with Output short circuit protection, Surge Voltage Protection of min 3 KV and Safety test as per IS15885 Part 2/ Sec 13. Total system Lumen not less than 2000 or above in Cool day Light(6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy100 Lm/w, THD(%) < 20, LED with Average life of 50000 Burning hours complete with all accessories as required with connections. Make - Havells Cat Part No -LUMILINEBS20WLED865SPCWH/Wipro/Philips.

S&F Ceiling fan 400mm sweep, 230 Volt, 50 Hz, speed 1750 RPM , CUBOID LOW HEIGHT CEILING FAN type with built in LED light and remote controll in white colour with connection incl necessary cutting in ceiling complete all as specified and directed.

S&F in repair modular blanking plate, 1 Module complete all as specified and as directed.

S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps, 240 Volts complete all as specified and directed.

S & F in repair MCCB 415 V, 125 Amps, 25 KA, 4 Pole complete all as specified and directed.

S & F in repair MCCB 415 V, 100 Amps, 35 KA, 4 Pole complete all as specified and directed.

S & F in repair MCB TPN, 415 Volts, 63 Amps complete all as specified and directed.

S & F in repair MCB DP, 240 Volts, 40 Amps complete all as specified and directed.

S & F in repair MCB DP, 240 Volts, 63 Amps complete all as specified and directed.

S & F in repair MCB SP, 240 Volts, 10 Amps complete all as specified and directed.

S & F in repair MCB SP, 240 Volts, 16 Amps complete all as specified and directed.

S & F in repair MCB SP, 240 Volts, 32 Amps complete all as specified and directed.

S & F in repair MCB SP, 240 Volts, 63 Amps complete all as specified and directed.

M/S GEETANJALI ENTERPRISES

a.k constructions

MAA SANTOSHI ENTERPRISES

VIJAY KUMAR GUPTA

R R Associates

friends associeates