Construction and Maintenance of Rajiv Gandhi Knowledge Service and Innovation Hub at Jodhpur

Amount

EARTH WORK

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 500m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed: All kinds of soil

Excavation for foundation up to 1.50 m to 3.00 m depth including sorting out and stacking of useful materials and disposing of the excavated stuff up to 500m lead.In All kinds of soil

Excavation for foundation up to 3.00 m to 5.00 m depth including sorting out and stacking of useful materials and disposing of the excavated stuff up to 500m lead.

Filling available excavated earth in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.

Supplying and filling earth including watering, ramming, consolidating and dressing complete. Including the rate of carrage

Supplying, Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion)

PLAIN & REINFORCED CONCRETE( All the concrete works will have "FORM FINISH")

Basement & Below Ground

R.C.C Work for sub structure

Providing and laying controlled reinforced cement concrete conforming to grade M35 (IS 456 – 1976) unless stated otherwise as per specifications in the following items at any depth or height, excluding the cost of steel reinforcement but including centering, shuttering, compacting with vibrators, curing and hacking the exposed surface wherever required to receive plaster or floated steel trowelled surface wherever specified. The rate shall include for providing recesses to slabs, walls and columns and sleeves and/or openings in slabs, construction joints, sunk slabs, cantilever slabs, making holes in formwork for taking out dowels etc. to the required shape, size and slope as shown in drawings.for the work of :-Footing,raft,columns,lift walls,retaining walls,pile caps,UG Underground domestic water tank, Fire tank, STP,WTP

R.C.C Work

SUPER-STRUCTURE

Providing and laying controlled reinforced cement concrete conforming to grade M35 (IS 456 – 1976) unless stated otherwise as per specifications in the following items at any depth or height, excluding the cost of steel reinforcement but including centering, shuttering, compacting with vibrators, curing and hacking the exposed surface wherever required to receive plaster or floated steel trowelled surface wherever specified. The rate shall include for providing recesses to slabs, walls and columns and sleeves and/or openings in slabs, construction joints, sunk slabs, cantilever slabs, making holes in formwork for taking out dowels etc. to the required shape, size and slope as shown in drawings. CONCRETE TO HAVE MINIMUM CEMENT CONTENT OF 375 Kg./Cu.m. for columns, slabs, beams and staircase, DG structure, overhead tank etc (the rate is inclusive of work upto all floor level including scaffolding & double scafloding )

Providing and laying controlled reinforced cement concrete conforming to grade M25 (IS 456 – 1976) unless stated otherwise as per specifications in the following items at any depth or height, excluding the cost of steel reinforcement but including centering, shuttering, compacting with vibrators, curing and hacking the exposed surface wherever required to receive plaster or floated steel trowelled surface wherever specified. The rate shall include for providing recesses to slabs, walls and columns and sleeves and/or openings in slabs, construction joints, sunk slabs, cantilever slabs, making holes in formwork for taking out dowels etc. to the required shape, size and slope as shown in drawings. (the rate is inclusive of work upto all floor level including scaffolding & double scafloding )

In Double height area, the centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels.(Plan area is to be measured)

Supply & Fixing steel reinforcement for R.C.C. including transporting, decoiling, straightening, cutting, bending and placing in positing at all levels and binding with approved gauge binding wire. For lapping, reducers or couplers should be used as per structural drawings if required. The rate to include for binding wire, chairs, spacers, reducers, couplers which will not be measured separately for payment. Quantity of steel as per drawing and with authorised overlaps only shall be measured and paid for. High yield strength deformed bars conforming to IS:1786 in all R.C.C. work (F.E. 500 Grade).

Plain Concrete

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work in M20 grade Nominal Mix 1: 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work in M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) & minimum cement content to be 250 kg per Cu.mt

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work in M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work in M7.5 grade Nominal Mix 1: 4: 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work in M5 grade Nominal Mix 1: 5: 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size)

Supply & Fixing Structural Steel : Steel work welded, in built up sections framed work including cutting, hoisting, fixing with anchor bolts / fastners in position and applying priming coat of red oxide in columns, beams and joists, channels angles, tees flats with connecting plates or angle cleats. The rate shall include the cost of primer and two coats of enamel paint on all structural steel work.

Terrace Water Proofing Providing & Applying CIS Roofing (Cool Insulated Sustainable Roof): A complete water proofing on RCC substrate with two component acrylic water proofing coating (Hi seal slurry + Hi seal powder) with reinforced fabric Protected by 1:4 cement mortar plaster coat Followed by an Cementous insulation layer of Panache make or equivalent “Insulmix Screed”, which is encapsulated clay aggregate mixed with cement & polymers, which would provides insulation up to 0.087 K VALUE On top of that cement screed with M:20 design to provide proper slope as per design protected by COOL TOPS – 5 Coat Heat Reflective Coating System on Panache make or equivalent products (Cool Guard, Cool Top & Transeal)

Underground structure Water Proofing

Providing patented cement based waterproofing treatment from outside to Underground structure, liftpits, trenches and other underground strutures during construction consisting of waterproof layer over cement concrete 1:3:6 bedding finished with rough Kota stone of about 20mm thick well pointed in the joints with cement and approved water proofing compound as per manufacturer, specifications and continuing the treatment after completion of floor slab and side walls on the outer face of walls and upto a height of 300mm above the adjacent ground level the total thickness of water proofing treatment shall be about 75mm for floors and about 40mm for walls. The rate shall be inclusive of all material , labour equipment required and also cement slurry grouting if required (for vertical surfaces)

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Ist course of applying cement slurry @ 4.4 Kg/sum mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water. proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg per Sq.mt. of area. iv) IVth course of 400 micron thick PVC sheet .(Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/Sq.mt.)

BRICK WORK/BLOCK WORK

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto all floor in all shapes and sizes in : Cement mortar 1 : 4 (1 cement : 4 coarse sand) (the rate is inclusive of work upto all floor level including scaffolding & double scafloding )

Half brick masonry in Superstructure , above plinth level upto all level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) and providing and placing in position 2 Nos. ,8mm Ø M.S. bar at every third course of half brick masonry .(the rate is inclusive of work upto all floor level including scaffolding & double scafloding )

Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonary 150mm/230mm/300mm thick with Grade-I AAC blocks in superstructure above plinth level upto floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-charge. (The payment of RCC band and reinforcement shall be made for seperately).

STONE MASONRY

Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in Cement Mortar 1:4 ( 1-Cement : 4-Sand).

DOOR & WINDOW WORKS

SITC of powder coated Metallic Door (with OR without Vision Panel & with door frame) With door hinges and locking arrangements and both way handle. Prepare with rigid thermo fused film metal panels. Specification: 0.6mm thick Metal panel sheets, the internal cavity filled with adequate quantity of honeycomb. The material of the partition and that of the metal door will remain the same. The material of the partition and that of the metal door will remain the same. The door thickness shall be a minimum 45mm and the frame thickness shall be a minimum of 115mm.

Providing and fixing at all levels & locations, 120 minutes fire rated steel Fire door and frame of Galvanized steel conforming to IS:277 of approved make, overall door assembly conforming to IS 3614 Part-1 & Part-2 & BS 476 Part 22 or EN 1634 as required . Fire doors should be tested at CBRI for rating of 120 minutes (supported by certificate). Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Frame should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening. Door shutter shall be made with minimum 1.2 mm thick steel pressed formed to provide a 46mm thick fully flush double skin door shell with lock seam joints at stiled edges. The internal construction or in fill material of the door to meet desired fire rating with reinforcement/rails at top, bottom, middle and vertical stile. The infill material shall be resin bonded honeycomb core or approved equivalent. The door shall be factory prepared for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers etc complete. The edges should be interlocked with a bending radius of 1.4mm. and shall have door astragals of required profile and size provided on the meeting stile for both active and inactive leaf. The shutter is to be fixed with frame with SS ball bearing butt hinges 3mm thick. Frame shall be fixed with approved dash fasteners and concrete should be poured in hollow frame section etc. Vision panel wherever applicable should be of size at least 300 x 300mm provided as per manufacturers recommendation with a beading and screws from inside with no screws and fasteners on the surface. The glass for vision panel should be 6mm clear fire rated glass of approved make & relevant rating of the door to withstand thermal shock upto 800 degree C on hose stream test. Door frames and shutters to be finished with power coating (minimum 50 micron), all complete as per the specifications and directions of Engineer-In-Charge. (Vision panel and handle rate is inclusive of the item and Hardware i.e. locks, door closer, Panic bar, etc shall be paid for separately)

Providing & fixing Fire rated door Closer of approved make certified for 2Hrs fire rating, all complete as per direction of Engineer in Charge.

Providing & fixing Fire rated Panic Exit Device (Panic Bar) of approved make certified for 2Hrs fire rating for fire door, all complete as per direction of Engineer in Charge.

Providing & fixing Fire rated Lock of approved make certified for 2Hrs fire rating, all complete as per direction of Engineer in Charge.

Providing and fixing external grade board solid core flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' including aldrop, mortice lock : 35 mm thick with decorative teak veneer with veneer polish both side. The rate shall include the work of pressed steel door frame confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section. size as per directed by Engineer-in-charge

Extra for providing other type of fittings as mentioned in annexure A i.e., (A) Single Leaf Door Shutters (i) Hinges of Size 100mm 3 Nos. (ii)Sliding Bolt one No. of length of 300mm of 12mm dia upto 35mm thick shutters and 16mm dia and 300m. length for above 35mm thick shutters1 No. (iii) Handles 150mm 2 Nos. (iv) Tower Bolts 300mm 1 No. (v) Tower Bolts 150mm 1 No. (vi) Door Stopper 1 No. (vii) Back Stopper 1 No. (B) Double Leaf Door Shutters (i) Hinges of Size 100mm 6 Nos. (ii) Sliding Bolt one No. of 350mm long 16mm dia 1 No. (iii) Handles 150mm 3 Nos. (iv) Tower Bolts 300mm 2 Nos. (v) Tower Bolts 150mm 2 Nos. (vi) Door Stopper 2 Nos. (vii) Back Stopper 2 Nos. and ( as approved by EI) : Stainless Steel Fittings

Providing and fixing IS : 3564 marked Aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. The rate shall include the cost of primer and enamel paint on all structural steel work.

Toilet Cubicles: Standard Cubicle Sizes (Regular) Total Height from Ground= 2003 mm Width = 910, 990 & 1060 mm Depth = 1550 mm Bottom Gap = 150 mm Door Size = 1750x610 mm Standard Cubicle Sizes (Differently abled) Total Height from Ground= 2003 mm Width = 1360,1660 & 1825 mm Depth = 1830 mm Bottom Gap = 150 mm Door Size = 1750x910 mm All doors, mid/end pilasters and Intermediate partitions to be made from 12 mm thick compact board of the same colour. Hardware and accessories to be in Nylon + Aluminium.Adjustable legs to anchored on the floor and then mid/end pilasters to be fixed on them. The adjustable legs are to be designed to give a bottom gap of 150 mm. On upper side top rail is fixed to maintain alignment of all pilasters. Intermediate panels (partitions) to fixed to mid pilaster and rear wall through U-channels. Each door is mounted on mid/end pilaster with 3 hinges maintaining a floor clearance of 150 mm. Door is also equipped with one coat hook and one door knob. Door can be either inside or outside opening. Opening of door can be left or right. Each Mid/end pilaster coming at the free end of the door is equipped with one privacy thumb-turn and one door stopper channel along with a rubber sponge to dampen the noise.

Design, Fabricate, deliver (Prefabricated & Assembled - to job site) and install uPVC casement / slider windows from Saint-Gobain or equivalent. The outer frame and shutters should have a sill width of 70mm for two track and casement system as well as 128mm for three track sliding system. The face width of the sash should be minimum 110mm. uPVC profiles should have a minimum wall thickness of 2.3mm in the visible area. The profiles should be welded seamlessly Zip-welded without needing corner cleaning or grooved/raised finish. Both the shutter and bead profiles should have co-extruded gaskets in the glazing area. The frame and shutters should have EPDM gaskets in the sealing area. Steel reinforcement should be galvalum minimum of 1.5 mm thickness for frames and 2 mm for shutters and approved as per structural calculations. The glass panels shall be double glazed hermetically sealed panels made of 6mm thick Heat-strengthened coated glass - Envision series SKN 454 of Saint-Gobainor equivalent with coating on surface #2 with 12mm dry air gap and 6mm thick clear heat strengthened glass of Saint-Gobain or equivalent make(654 PPM) with properties as Visible Light Transmission (VLT) as 42%, Light Reflection internal as 22%, Light reflection External as 14%,Solar Factor as 0.24, and U value as 1.5 W/sqm.k and weighted average sound reduction as minimum of 30dB as per the detail drawings ,and securely bonded & Glass tolerance of ±0.2 as per EN Standard . Structural calculations to be submitted for both glass and frames. The vertical member should not deflect more than L/175 or 19mm for SGU and L/175 or 15mm for DGU, Deflection calculation should be based upon moment distribution. Steel reinforcement should have AluminoZinc coating for higher corrosion resistance. All hardware should be designed to withstand coastal conditions. 3D hinges to be used with adjustability in 3 directions. Multipoint locking to be provided with espags of SS304 grade. All shims to be capable of transferring the load evenly and made of a suitable material (Teflon, Nylon etc) capable of lasting the life span of the system. All miscellaneous items such as peripheral sealants, backer rods, fasteners etc to be included in the rate. (with mesh shutter & fixed aluminium grill)

STEEL, ALLUMINIUM AND IRON WORK

Providing and fixing in position S.S. hand rail in main stair case, landing ,balconies etc. in 2"(50mm) dia S.S. pipe 1.5mm thk. 304 grade resting on1"( 25 mm) S.S. pipe 1.5mm thk. 304 grade size S.S.304 grade square bars 10mm, of clear height 105cms placed at 30 cm c/c including making necessary hold fast fixture (10 mm square bars 22 cm long) embeded in staircase concrete for resting the S.S 304 grade . vertical square bars with holding etc. as per approved design and as required for the work including bending hand rail pipe to proper shape in curves with specials etc. complete

PAVING AND FLOOR FINISHES

P & F 1st quality fully body Vitrified Porcelain Polished tiles with skirting of size 600 x 1200mm height, 10 mm thickand on floor and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with CM 1 : 4 as per drawing, Tiles will be laid with 2 mm gap using spacers and gap will be filled with matching color epoxy latictere Size 600 x 1200 mm.

P & F approved make & shade Full body Vitrified Wall tile with granite pattern, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with white cement slurry @ 3.3kg per Sq.mt, including pointing in white cement mixed with pigment of matching shade complete. It Should be antiskit smooth surface polished. Size 600 x 600 mm.

Providing & laying sandwitch platform / water trough (sandwitch of 18 mm thk Granite of approved shade and sample on top and 25 mm thk kota in bottom with 30 mm thk screed of (1:2:4) in between)with sandwitch supports of 25 mm thk two kota on sides and screed in between and 75 mm raised platform with kota on top as per design and approved sample for all floors / all levels / all heights. The rate includes rounding, champhering and mirror polishing of edges, facias of granite, including necessary bonding adhesive like Araldite or equivalent. (Only plan area shall be measured and paid for). Rate shall be inclusive of making holes & cutouts for SS sink, Ovel wash basin, Piller tap, Bib tap-couplin etc. complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over base cement mortar 1:4 (1 cement : 4 coarse sand) as per drawing, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade.

Providing edge moulding to 18 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Kotah stone slab flooring with skirting of 100 mm height width factory cut, factory polished over base of cement mortar 1:6 (1 cement : 6 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete For area of each slab from 2001 to 5000 Sq.Cm

Providing and fixing Green / Black Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete and making grooves in stairs and filling it by aluminium strips and edge moulding of each steps.

Providing, machine mixing and laying of 75mm thick vacuum dewatered (Tremix) concrete of grade M 20 of trap metal for plain cement concrete as per detail drawings including dewatering, steel form work, compaction, panels as specified and as per recommendation of manufacturer of equipment, power floating and broom finishing or finishing smooth as specified, cutting concrete for groove as expansion joint about 1/3rd depth of concrete and 6mm wide, filling grooves with approved bitumen based sealant, cleaning, curing surface etc. all complete

Providing and laying Stone finished cement concrete paver block(400mmx200mmx200mm) as per drawing

Rubble soling: Providing and laying in basement under floor rubble soling to a consolidated thickness of 200/300mm thick rubble stone and packing , using 200/250mm size stones, using murrum (gravel) hand packed with smaller stones of suitable size well rammed and consolidated including spreading in uniform layers watering ramming, consolidating all complete as per specifications.

a. With rubble from outside

PLASTERING AND PAINTING

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 12 mm thk. Cost includes scaffolding and filling joints between concrete and masonry in cement mortar including racking the joints to form "V" groove (the rate is inclusive of work upto all floor level including scaffolding & double scafloding )

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joint etc. complete fine finish : 20 mm thk Cost includes scaffolding and waterproofing compound and filling joints between concrete and masonry in cement mortar including racking the joints to form "V" groove (the rate is inclusive of work upto all floor level including scaffolding & double scafloding )

6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) Cost includes scaffolding(the rate is inclusive of work upto all floor level including scaffolding & double scaffloding )

Providing and fixing Chicken mesh jali (22 gauge) at the junction of 2 different surfaces of different material component at the time of plastering to prevent cracking in plaster surface as and where directed at all floors with all leads and lifts etc.complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete

COOL WALLS WITH COOL WRAP PREMIUM Providing & applying complete cool wall coatings(HI SRI Exterior paint) on wall surface with SRI Value of 107 Surface preparation: cleaning & washing Applying primer to give bonding to the substrate that reduces porosity & dampness of the surface 1 coat of primer & 2 coats of Panache make or equivalent product “COOL WRAP”.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

MISCELLANEOUS ITEMS

Providing and laying 750mm wide broom finished plinth protection with 230mm X 600mm (average) toe wall in brick masonry in C.M 1:6 over 75mm thick, 400mm wide PCC 1:5:10 (below masonry) broomed finished 750 mm wide and 100mm thick cement concrete 1:2:4 over 520mm wide 150mm thick PCC 1:5:10 ,with necessary grooves for expansion joints and curved vata at the junction of wall and plinth protection including excavation ,formwork,15mm thick cement plaster outside brick toe wall tec.complete as directed by Engineer -in-charge. Include rubble soling to a consolidated thickness of 200/300mm thick rubble stone and packing using murrum (gravel) hand packed with smaller stones of suitable size well rammed and consolidated including spreading in uniform layers watering ramming.

Grading roof for water proofing treatment with water proofing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

100 MM or 50 MM WIDTH EXPANSION JOINT SETUP OF 50 MM EXPANSION SHEET:Cleaning of Concrete Surface on Both side of the Expansion Joints to remove any dust , Oil , Grease including Removal of laitence and cleaning the inside of the Expansion joint 2) Providing and applying base coat of Epoxy adhesive on both side of the joints as per width by SIKA -DUR 31C EPOXY and Placing the 3) Providing and Applying Combiplex Tape 300 mm * 1MM Expansion Joint Tape Tape 300 mm width x 1 mm thickness as per Manufacturers Methods Statement ( for 50 mm Lower Joint Side ) 4) Providing and applying the Top Coat of Epoxy Adhesives SIKA -DUR 31C EPOXY on both sides of the treated Expansion Joints as per the width of the EPDM SHEET 150MM* 1MM THICK . For terrace

Providing and fixing 150 mm wide sheet covering over expansion joints with iron screws as per design to match the colour / shade of wall treatment.Aluminum fluted strips 2 mm thick

Providing holes/pockets/cutouts in slab, beams, RCC walls with or without reinforcement during concreteing by providing forms, thermocoles including welding of reinforcement, shuttering, stagging, etc. as per drawing and direction.

(a) upto and including 0.25 Sqm but more than 0.04Sqm

(b) 0.25 SM to 0.50 SM

(c) 0.50 SM to 1.00 SM

Providing and fixing Metal perforated false ceiling at all heights including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing of metal panels with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval and also including the cost of making openings for light fittings, grills, diffusers, cutouts and trap doors made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge. The Rate is inclusive of making the Trap Doors of all size as per the requirements. The item should include all necessary fittings for lighting provisions.

Providing & fixing calcium silicate ceiling tiles of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-Charge of thickness of tiles as mentioned below. 8mm thick. The Rate is inclusive of making the Trap Doors of all size as per the requirements. The item should include all necessary fittings for lighting provisions.

Providing and fixing calcium silicate board false ceiling at all heights including providing and fixing of frame work made of special sections. 8mm thick (with trap door)

TANK WATERPROOFING TREATMENT:Providing & Applying a complete water proofing on RCC tanks. Identifying and sealing, filling of cracks if any with cement grout mixed with Panache make or equivalent, ‘Hi Seal Slurry’, repairs of pot holes if any, followed with priming of SBR. Laying of fiber mess and 2 Coats of two component Panache make or equivalent product mix of ‘Hi Seal Slurry Liquid & Powder’ resulting in to an onsite water proof membrane. Protected by 1:4 cement mortar plaster coat (Grey Cement +Panache make or equivalent product Hi CE Pack.Install protective screed by adding Panache make or equivalent admix Hi CE Pack up to 15 to 20 mm thick to bear the hydro pressure.Including material, labor, plant & tools etc.Rates are excluding the civil work of Protective screed of 15 to 20 mm .

WATER REPELLENT TREATMENT ON BRICKS AND EXPOSED:Providing & Applying of complete water repellent treatment by applying two coats of Panache make or equivalent NANOSEAL DRY LOOK (a silane siloxine water base water repellent) by brush or spray on concrete rendered surface / Exposed brick surface / stone cladding horizontal surface after proper cleaning and washing to that provides a complete water repellency to the surface without changing any aesthetic look of surface upto 5 years.(Including material, labour, plant & tools etc.)

Supply and installing Rain Water Percolation pits - 1500 mm in diameter up to 3200 mm deep, bottom 500 mm filled with boulders 150 - 230 mm size, over which one no. UPVC 160 mm dia (4.0 kg/cm2) perforated pipe with 8 mm dia perforations protected by a cowl on upper end 2100 mm long, surrounding filled with broken bricks up to 1000 mm, pebbles 40 to 50 mm up to 400 mm, Gravel 15 to 25 mm up to 400 mm and upper most layer of 300 mm with coarse sand of 3 to 5 mm. The top 600 mm shall be left open, with RCC grated cover on top.

Supply & Installation of toughened reflective glazing Glass :- (12 mm thick toughened glass) Including full glass of minimum 12 mm thick clear toughened glass, structural support system for top and bottom including holding system from RCC slab above false ceiling, including runner hung anchor fastener to fix it. Rubber interlinear & gaskets to fix bottom into SS "U" channel in floor. silicon sealant to filled gap.

SIGNAGES ON WALL: Providing, Fabricating & Fixing wall signage's using 304 grade Stainless steel brushed steel finish plate of 1.5 mm thick fixed on a wall using s.s studs including punched (laser cut) lettering carried out on s.s plate of required size and text as directed by Engineer over the S.S plate etc.complete. Size: 18" x 6"

SIGNAGES HANGING FROM CEILING Providing, Fabricating & Fixing signage's using 304 grade Stainless steel 1.5 mm thick brushed steel finish plate (2 nos) with 8mm thk. Acrylic sheet covered with vinyl of approved colour, sandwiched between two S.S plate and fixed with s.s struds . Sandwiched plates should be fixed in 12mm X 12mm S.S 1.5mm thk.304 grade frame and punched (laser cut) lettering carried out on both the s.s plates of required size and text as directed by Engineer and hanged to ceiling with the help of S.S 8mm thick chain at both ends with making all the fixing arrangement to the ceiling and to the plate complete etc.complete. size: 18" x 6"

Aluminium Structural glazing work – Providing and fixing of specially designed high performance semi unitized system using aluminium section of Jindal /Hindalcon make for main mullion ,corner mullion , main transom and Top & Bottom transom for main frame based structural glazing .mullion & Transom- shall be out of aluminium section size of 63.5X 58X weight 1.350 kg/m. Anodizing – The surface of aluminium section shall be finished with 15 micron anodizing in required shade .Silicon D/C 995/SSG 4000 structural sealant .weather Silicon – 789 / Ultra proof Single shutter section for glass panel .The glass panels shall be double glazed hermetically sealed panels made of 6mm thick Heat-strengthened coated glass - Envision series SKN 454 of Saint-Gobain with coating on surface #2 with 12mm dry air gap and 6mm thick clear heat strengthened glass of Saint-Gobain make(654 PPM) with properties as Visible Light Transmission (VLT) as 42%, Light Reflection internal as 22%, Light reflection External as 14%,Solar Factor as 0.24, and U value as 1.5 W/sqm.k and weighted average sound reduction as minimum of 30dB as per the detail drawings ,and securely bonded & Glass tolerance of ±0.2 as per EN Standard . Structural calculations to be submitted for both glass and frames. The vertical member should not deflect more than L/175 or 19mm for SGU and L/175 or 15mm for DGU.

Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:4 ( 1cement : 4 coarse sand) with joints finished flush. Red Sand stone(Jodhpur stone) size not less than 1350 Cm2 - b) 50mm

Exterior Façade item - Providing and fixing of Made in India Handmade cladding stones in CortenCrete finish having iron oxidation occurring in multiple years to create the corrosion resistance and tensile strength amalgated with concrete by FlexStone. To be installed along the walls, made with recycled raw materials and cement used as a binder, with Density more than 2200kg/m3, high compressive strength more than 50Mpa and abrasion resistant, exterior grade applied with polymer modified adhesive with good adhesion strength and fast curing. Product to be green and sustainable, weather & algae fungus resistant, breathable, insulated, no VOC, fire rated and have high melting point and almost no discoloration. Stone weighing approx 3-4 Kgs/sqft to be applied with the polymer modified adhesive applied as a uniform scratch coat first and individual pieces over it. The protective transparent water based breathable PU sealer coat to be done overall with the help of a brush in the final stage for a maintenance free cladding altogether. Products to be maintenance free and the company to provide 12 years of warranty against manufacturing defect. Fixing and cutting of the stones to be done as per the drawings, specifications and instructions of the Architect or Engineer incharge. The cost of scaffholding is included upto all floor levels.

Providing & Fixing corner guard for columns at parking area size 45mmX45mm, height 1200mm colour: Black with yellow or White Reflective Stickers Body Material: Modified Thermoplastics (Polymer Rubberized) Fixing: Fixed on the wall & corner of columns with six 2" Screws.

Basement Floor Marking Paint - Basement floor marking with adequate nos of coats to give uniform finish with thermoplastic road marking paint in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.

Under Deck Insulation -Under deck insulation with 32mm nitrile rubber of 33Kg/cu.m density covered with Aluminium finishes per specefication.

Providing and fixing stainless steel tactile indicators in circular studded pattern and elongated striped pattern. Material grade should be taken as 316 with smooth finish.

Barricading site

Providing and maintaining Barricading on the site with 2.4m High x 1.05m brand new GI sheets, sheets of 0.79mm thickness (22 B.W.G..) conforming IS. 277-1969 including fastening with galvanized iron screws and J bolts as per details etc. complete. on a frame work made out of 50mm dia MS Hollow pipes, 2mm thick spaced at 0.9m c/c both ways. The MS shall give stable supports as per direction of the Engineer-in-Charge. The frame work and GI sheets to be painted initially and re-painted after six months or in the eventuality if additional coat required in between, in opinion of Project Manager.

Description of Work / Item(s)

Amount

Supply, installation, testing and commissioning of BMS Computer System: i9 with 12 or higher generation processor or Equivalet Server PC with latest server OS config. , Intel(R) Xeon(R) Processor, min 4.0 GHz Base frequency to 5.2 GHz or higher, 16MB L3 Cache with 32 GB RAM, & 1 TB SSD, Gigabit speed Ethernet card, USB connection & internal modem, Microsoft(R) Windows(R) 11 as per latest OS Professional Enterprise , Web server software, DVD-ROM Drive (with RAM), 100/1000/10000 Mbps (Gigabit speed) NIC for Network connection and anti virus software as per Tender Specifications. Accessories included 32 Inch LED Screen, Optical Mouse & Key Pad, Laserjet A4 Black and White printer, Windows Licensed software compatible with the above BMS System configuration complete as required.

Application Software- SITC of the following window based graphical software for IBMS system with 2 Nos Client for Operator workstation. License for minimum 10000 hard/soft I/Os to be considered and shall have provision of future expansion . The following software packages shall have below minimum features and compliances. (Make:- Metasys by Johnson Control/Desigo CC by Siemens/ ALC by Carrier /EBI by Honeywell )

a) 3D & HD vector dynamic graphics with Autocad import of plan with Zoom In & Zoom Out facility b) Native 64 Bit System , BTL,UL,EN Certified System, BACnet Profile B-AWS (Advanced workstation) as per the BTL Listing c) Multi-Monitor Support-( Min 4 Nos), Multi-language support,Object tracking on multiple cameras d) Certified OPC DA Server by OPC Foundation e) HTML5 based Web-Server software shall permit use of Standard Web-Browsers such as Microsoft Edge, Google Chrome, Mozilla Firefox, etc f) The Software shall comply to international standards and strive to deliver products that meet security standards such as ISA/IEC 62443, UL2900, ISO/IEC 27001, ISO/IEC62443 and OWASP g) Cybersecurity SL2, Seamless integration of Security certificates within customer IT infrastructure, Microsoft’s active directory-based authentication, LDAP integration, Use of network infrastructure that supports physical network or VLAN segmentation, End-to-end encryption from client to server, End-to-end encryption between servers, Certificate-based data exchange, Encrypted backups h) Audit Trail , 4-Eye Principle, Data Point Validation, Verified tempering evidence for report transmission i) The software shall integrate with BIM data seamlessly j) Ability to provide data to other systems thru OPC DA Server and / Or Rest web services interface k) Reports - Customized reports for Trends and alarm with Graphic screen shots. l) Seamless integration of Fire alarm system should be there. m) Alarm Escalation: Assisted treatment of alarms which helps in Predefined & fast intervention steps for faster response n) Energy dashboards having cockpit view of total energy utilized. Energy and Power reports.

SITC of True IP Based DDC Standalone 32 Bit Intelligent, peer to peer communication, interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch . The controller shall have 16 inputs/outputs inbuilt and can be expandable upto max 40 points by Input/Output Modules. The DDC shall have 300 Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. DDC Controller shall be equipped with a battery-free real-time clock with backup for min 7 days using super capacitor. The controller shall be freely programmable and have System functions (alarming, scheduling, trending, access protection with individually definable user profiles and categories). It should have WLAN interface, Cloud connectivity for remote access and inbuilt port for POT for local interface. Note: Comissioning tool should not be dependent on any license / dongle and no extra cost should be charged. (Make:- Metasys by Johnson Control-/Desigo CC by Siemens/ ALC by Carrier /EBI by Honeywell )

The above shall be housed in vandal proof, lockable & secure MS Cabinets to be supplied along with all necessary switchgear protections as required. Number of controllers shall have spare capacity of 15% for future expansion.

Controller for TFA system (1 TFA in 1 DDC)

Controller for Air Washer & Dry Scrubber ( 2 Airwasher in 1 DDC)

Controller for Ventilation Fans, Exhaust Fans ( 4 Fans in 1 DDC)

Controller for Pressurization Fans ( 4 Fans in 1 DDC)

Controller for Electrical system -HT /LT/DG /Transformer

Controller for Water & Plumbing System

Controller for Fire Fighting system

Controller for Lifts (2 Lifts per DDC)

Controller for OG/UG Tanks

SITC of True IP Based BTL & UL Listed for third party integration. The controller shall have 2-port Ethernet switch and WLAN interface. It should have BTL label (BACnet communications passed the BTL test) and consisting of Dual microprocessor with Storage capacity of 1 GByte RAM. It should support Real Time clock with backup of upto 7 Days using super capacitor and also should have option for external battery if required. It should Support of the major communication protocols: BACnet,/IP, BACnet MS/TP, Modbus IP and Modbus RTU upto 500 points. Note: 3rd party make integartor is not acceptable. (Make:- Metasys by Johnson Control-/Desigo CC by Siemens/ ALC by Carrier /EBI by Honeywell )

For VRF integration on Bacnet/IP

For TFA & CSU VFDs on Modbus RS485 (10 Points per VFD)

For CO2 Sensor, Ambient Sensor, PM2.5 & PM 10 Sensor on Modbus over $S485

For DG Sets on Modbus RS485 (18 Points per DG)

For HT Meter & Energy Meter integrationon Modbus over RS 485

For PAC Units on Bacnet/IP

For Solar Panel on Modbus over TCIP

For UPS on Modbus/RS485 (10 Points per UPS)

For Lifts on Modbus over RS485

For Fire Alarm System on Bacnet/IP - 1500 Points

For CCTV integration on open protocol

For Access control integation on open protocol

Field instruments- Supplying, installing, testing and commissioning of the following sensors / transducers / transmitters. The DDC shall support sensor with DC 0...20 mA or 4...20 mA, DC 0 ... 10 V, LG-Ni 1000, 2x LG-Ni1000, Pt 1000 , NTC 10k, NTC 100k, 1000 Ohm. All sensors should be UL Listed. (Make:- Johnson Control/ Siemens/ ALC)

Outside air temperature + humidity, CO2 sensors. It should be provided with sun sheild and rain protection.

Duct type CO2 sensor

PM2.5&PM10 Sensor on Modbus

Differential pressure switch for Blower and Filter Status

Duct type temperature Sensor

CO Sensor

Flame Proof Level Switch

Voltage TRANSDUCER

Current Relay

Absolute water Pressure Sensor

Occupancy Snesor

Bi Level Switch

Supply, installation, testing and commissioning of hand held portable operator terminals (POT) minimum 15 inch. TFT display with capacitive touch screen type, shall be able to view graphs , alarms , parameters etc. POT shall have integrated web server and a BACnet/ IP web interface to connect a HTML5 browser to a device on the network. POT With all required connectors etc as per technical specification etc. (Make:- Johnson Control-Metasys/ Siemens/ ALC)

Cabling and Conduiting

Supplying, laying, termination, testing and commissioning of armoured signal cables. (4 core x 1.0 Sq.mm), PVC insulated, Shielded tinned copper conductor cable. (Make:-Polycab/ RR Kabel/ Finolex)

Supplying, laying, termination, testing and commissioning of armoured Communication cables. (2 core x 1.0 Sq.mm), PVC insulated, Unshielded twisted copper conductor cable. (Make:-Polycab/ RR Kabel/ Finolex)

Supplying, laying, termination, testing and commissioning of 3 Core 1.5 Sqmm, unarmoured ATC conductor multistranded, FRLS cable for Powering DDC , Actuators. (Make:-Polycab/ RR Kabel/ Finolex)

Supplying, laying, termination, testing & commissioning of CAT 6 unarmoured Cables with required accessories like RJ45 connector etc. (Make:-Tyco / Panduit / Molex)

Supply, Installation, Testing & Commissioning of PVC Conduit 25 mm for Signal & Communication Cable (Make:-Precision / BEC / AKG )

Supply, Installation, Testing & Commissioning of GI Flexible (Make:-Precision / BEC / AKG )

Network Switches

Supply, installation, testing and commissioning of Layer 2 switch with 16 ports (RJ-45) including SFP modules, rack mountable, SMPS power supply & other termination accessories (Like Pigtails/LIUs/ Convertors/Splicing equipment ,Patch panel, Patch Cord, Etc) complete as per specifications and as required for BMS DDC Panel Networking. The switch to switch distance shall not exceed beyond 80 meters. (Make:-Cisco / HP / Avaya/ Tyco / Panduit / Molex )

Description of Work / Item(s)

Amount

Water Supply / Transfer Pumps :

In-line, vertial multistage, centrifugal clear water pumps, speed upto 2900 rpm, with SS-304 casing, S.S 304 impeller and SS-304 shaft, C.I. Base CED coating & head, connected to a TEFC motor (with mechanical seal) suitable for 400 / 440 volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure guage with gunmetal isolation valve, vibration eliminating pads as required, M.S fabricated base plate bolted to cement concrete foundations complete. Vendor to submit performance curves and technical catalogue of the proposed model for review and information.

Electrical Starter panels complete with O/L Relay with Single phasing preventer feature, earth leakage relay, ON-OFF and Trip Indicating lamps, contactors contacts for Building Automation System, interlocking, level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level, cascade operation, working / standby slelction, etc. suitable for the motor H.P. as specified below and with provision for remote P.B. on/off complete as required. The on/off operations for all pumps shall be available on central BMS system

WATER TREATMENT FEED PUMP /TRANSFER PUMP - P1

For Transfer water Raw water tank to domestic underground water tank

Capacity per pump - 20.0 m3/hour] Head - 30.0 mt 1 Set = 1 Nos. pump (1 working+1 standby), cascade operation Approx. Elec. Load. - as per makes in RFP Location - Pump Room Supply Installation, testing & commissioning with Set of Auto Level Sensor

For Transfer domestic underground water tank to OH water tank

Capacity per pump - 15.0 m3/hour] Head - 55.0 mt 1 Set = 1 Nos. pump (1 working+1 standby), cascade operation Approx. Elec. Load. - as per makes in RFP Location - Pump Room Supply Installation, testing & commissioning with Set of Auto Level Sensor

FWS Transfer Pump - P2

For transferring water from STP pump room to flushing water over head tank

Supply, installation, testing & commissioning of Submersible single stage single entry pumps connected to submersible motor (The motor shall be watertight according to IEC class IP 68, and incorporate class F, insulation materials to withstand a continuous operating temperature of 155 deg C) for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, electrical panel with in built level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level as determined. The pump shall be provided with a lifting devise of pull chain/guide rail & G.I. heavy class rising main of 5m length including interconnecting piping, valves (Ball Valve / Butterfly), Non return valves (GM/CI) 15 m cable etc. as per requirement complete in all respects. (Pumps shall be installed in a set of two pumps One working and One standby, with cascade operation).

(Pumps suitable to handle solids upto 25 mm size with C.I. body, SS304 shaft, C.I. impeller with 15 mtrs cable, double mechanical seal).

Electrical Starter panels complete with O/L Relay with Single phasing preventer feature, earth leakage relay, ON-OFF and Trip Indicating lamps, contactors contacts for Building Automation System, interlocking, level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level, cascade operation, working / standby slelction, etc. suitable for the motor H.P. as specified below and with provision for remote P.B. on/off complete as required. The on/off operations for all pumps shall be available on central BMS system

Pump specification

Capacity per pump - 10.0 m3/hour] Head - 55.0 mt 1 Set = 1 Nos. pump (1 working+1 standby), cascade operation Approx. Elec. Load. - as per makes in RFP Location - STP Area Supply Installation, testing & commissioning with Set of Auto Level Sensor

Basement Drainage Pumps / Mud Pumps:

Supply, installation, testing & commissioning of Submersible single stage single entry pumps connected to submersible motor (The motor shall be watertight according to IEC class IP 68, and incorporate class F, insulation materials to withstand a continuous operating temperature of 155 deg C) for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, electrical panel with in built level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level as determined. The pump shall be provided with a lifting devise of pull chain/guide rail & G.I. heavy class rising main of 5m length including interconnecting piping, valves (Ball Valve / Butterfly), Non return valves (GM/CI) 15 m cable etc. as per requirement complete in all respects. (Pumps shall be installed in a set of two pumps One working and One standby, with cascade operation).

(Pumps suitable to handle solids upto 25 mm size with C.I. body, SS304 shaft, C.I. impeller with 15 mtrs cable, double mechanical seal).

Electrical Starter panels complete with O/L Relay with Single phasing preventer feature, earth leakage relay, ON-OFF and Trip Indicating lamps, contactors contacts for Building Automation System, interlocking, level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level, cascade operation, working / standby slelction, etc. suitable for the motor H.P. as specified below and with provision for remote P.B. on/off complete as required. The on/off operations for all pumps shall be available on central BMS system

Mud pump for Ramp Sump drainage - MP1 - 3000 liter capacity

Capacity/Flow Rate - 2.78 LPS (10.0 M3/Hr)c Head - 30.0 mt 1 Set = 2 Nos. pump (1 working+ 1 standby), cascade operation Approx. Elec. Load. - 1.5 KW each pump RPM - 2900 MOC - C.I Casing / C.I. Impeller / S.S. Shaft Location - Ramp 35 MM Solid handling Supply Installation, testing & commissioning

Sewage Pumps with grinder:

Supply, installation, testing & commissioning of Submersible single stage single entry pumps connected to submersible motor (The motor shall be watertight according to IEC class IP 68, and incorporate class F, insulation materials to withstand a continuous operating temperature of 155 deg C) for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, electrical panel with in built level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level as determined. The pump shall be provided with a lifting devise of pull chain/guide rail & G.I. heavy class rising main of 5m length including interconnecting piping, valves (Ball Valve / Butterfly), Non return valves (GM/CI) 15 m cable etc. as per requirement complete in all respects. (Pumps shall be installed in a set of two pumps One working and One standby, with cascade operation).

(Pumps with grinder system suitable to handle solids upto 25 mm size with C.I. body, SS304 shaft, C.I. impeller with 15 mtrs cable, double mechanical seal).

Electrical Starter panels complete with O/L Relay with Single phasing preventer feature, earth leakage relay, ON-OFF and Trip Indicating lamps, contactors contacts for Building Automation System, interlocking, level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level, cascade operation, working / standby slelction, etc. suitable for the motor H.P. as specified below and with provision for remote P.B. on/off complete as required. The on/off operations for all pumps shall be available on central BMS system

Grinder pump for Basement toilet Sump drainage - SP1 - 2000 liter capacity

Capacity/Flow Rate - 2.78 LPS (10.0 M3/Hr)c Head - 15.0 mt 1 Set = 2 Nos. pump (1 working+ 1 standby), cascade operation Approx. Elec. Load. - 1.5 KW each pump RPM - 2900 MOC - C.I Casing / C.I. Impeller / S.S. Shaft Location - Basement-1 STP 35 MM Solid handling Supply Installation, testing & commissioning

WATER TREATMENT EQUIPMENTS :

Providing, fixing, testing & commissioning of skid mounted fully automatic Reverse Osmosis System of output capacity 2000 lt./hr. designed at a minimum Flux at inlet and necessary of minimum 60-70% recovery, complete as required with the following items: (1 working ) - R.O plant at Terrace Level for Drinking purpose

Garnet Filter (GF)

Media for GF - 1 LOT

Antiscalant Dosing System with level sensors

Cartridge Filter

High pressure pump

R.O. Feed pump

R.O. Block

Membranes

Pressure Tubes

RO skid

pH correction system

Necessary instruments

Interconnecting pipe with necessary valve work

i) PVC (upto HP Pump)

ii) SS (HP Pump to Membrane)

Pressure gauges

Flow meter with Totalliser

PPLC cum instrument panel

Conductivity Indicator

Level sensors (Antiscalent Tank) - H/L

Level sensors (Permeate Tank) - H/L

Control Valve (Inlet) to R.O. tank

Control Valve (Reject)

RO electrical control panel.

R.O Plant SET as per above specification & Equipments

S.S.316 L ,13 mm thick EPDM Rubber insulated Storage tank of 2000 ltrs capacity installed at terrace level

Online U.V. treatment with single wave-length UV for disinfection of 3.0 cum/hr average flow; UV dosage of 300 to 400 joules/sqm, with more than 90% UVT for domestic water supply

SITC of Motorise valve - (Automatic OHT Level Control System - Butterfly Valve - IP55CB-230VAC 1) On-Off Type Electrical Actuator Single Phase 220V AC Operated Wafer Type Butterfly Valve with CI Body & amp; SS Disc2) Level Float Switch- 5M 3) Control Box - * IP 55 Finishing(250 x 160 x 115) , * LED Lamps: Tank FULL, Tank EMPTY, Power, * Power supply toggle switch, * Accepts 230V Single Phase power supply and provides 24VAC to float switch and 230VAC to valve coil., * Accepts O/NC feedback from float switch.

Tube Well

Construction of tube-well from ground levels and up to 100 Meter depth and above to accommodate housing and assembly pipe of following sizes in all types of alluvium strata by percussion / rotary drilling method and with gravel as per IS:4097-1967 and packing as per IS:2800 (Part I & II) 1979 as amended up to date (the work includes the cost of gravel & its primary packing and packing during development, lowering of housing & strainer assembly pipes, with supply and wrapping of coir rope, wherever necessary, for arresting fine sand particles. The work will not include cost of housing pipe and strainer pipe assembly and development work, but work would be completed after obtaining sand free water). - 200 mm Nominal bore.

Supply of ERW M.S. black casting pipe ISI marked (IS:4270/1992) of grade Fe 410 of following sizes at site of work. - 200 mm nominal bore

Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985. - 200 mm Nominal Bore.

Supply & fixing of B class 50mm dia GI pipes with flanges duly screwed & welded including rubber washer, nuts & bolts of 8mm dia complete in all respect ISI make.

SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering of riser pipe, G.I./ H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect.150 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively.

3.0 HP, 3-Ø, (54 -95)Mtr, (250-50) LPM

7.5 HP, 3-Ø, (76 - 96)Mtr, (285-180) LPM

5.0 HP, 3-Ø, (68 - 102)Mtr, (225-85) LPM

Supply and fixing of oil / Air break DOL / Star Delta Starter made out of sheet steel powder coated enclosure with single phasing protection, ON / OFF push buttons, etc. complete in all respect suitable for following rating motors.

Fully Automatic Star/ Delta Starter 3.0 HP to 10.0 HP

Supplying and Laying ISI marked P.V.C. insulated submersible cable as per PWD specification for electrical Works confirming to IS:694 and as per IS 8130 : 2013 of 1.1 kV grade .Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A ,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4 including making connection etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. All as per pre approved by Engineer in charge, making connections. as per recommended makes of RFP

6.0 Sq.mm 3 core flat / Round

SITC of wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as per PWD specification for electrical Works, made out of CRCA sheet . Other parameters required as per point (a) ,(b), (c),(d) below:- (a)Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors with / without detachable extension type structure (b)panel shall be duly treated for derusting in 7 tank process with dephosphating and with powder coating of minimum 70 microns on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness ,required hardware, separate detachable gland plate M.S. base channel (min75mm) , hinged door with locking arrangement for equipment/switchgear [c) Interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 125 amp ) and by solid bus bar (>125 amp ) . All joints / interconnections of copper bus bar shall be dully tinned . Clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves . Earth and Neutral bus bar shall be half of the size of phase bus bar. (d) only outer area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator. All as per drawing pre approved by Engineer in charge.

Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2) / Copper (IEC 60028) bus bar as per PWD specification for electrical Works, by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per PWD Electrical BSR 2021 . Electrolytic grade Aluminium bus bar 6010 grade

Providing & Fixing of BIS approved Current Transformer as per PWD specification for electrical Works ,ISI marked as per IS 2705-1992/ conforming to IEC 60044-1, with secondary terminal of CT shall be brought out suitable to a terminal block which shall be easier accessible for testing and terminal connection , with all necessary support in existing panel including connection etc. as required Current transformer Resin Cast Wound Primary / Ring Type Tape Wound as per IS 16227 with, Accuracy Cl, CT ratio and burden as specified. ISF<=5, Cu cross section of secondary wire 1.5sqmm (minimum), including all necessary support in existing panel including connection etc. as required . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per PWD Electrical BSR 2021 .

C T Class 1, Ratio upto 150/5, Burden 5 VA

Providing & Fixing of ISO certified company made UL listed , IP 65 110/220 V, unibody LED Indicating lamp IEC 60947 , CSA 22.2 with integral circuit, IP 20 terminal block, Approx. body dia for panel not less then 20 mm, length min. 50mm, front LED cover dia min. 29 mm, contact material phospher bronze for Led, PCB contacts shall be of brass (tin plated), impulse dielectric tested for 2.5 KV, Rated insulation resistance shall be 100 M ohm at 500VDC including connection etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per PWD Electrical BSR 2021 .

Red/yellow/Green colour

Blue / white Colour

Multifunction LCD meter with V, I, F, PF, KW, Kva, Kvar, Kwh, Kvah, Kvarh, Run hours, On hours, Phase angle, Interrupts, THD, Events, Neutral Current class 1 accuracy with RS485 port.

SITC of IP 40 3 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings as per PWD specification for electrical Works, conforming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage 800 V, provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections with lugs & spreaders, etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per PWD Electrical BSR 2021 .

With Thermal Magnetic release

up to 100 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu

Providing & Fixing of 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C tripping characteristic as per type of load and site requirement) 4KV impulse withstand voltage, as per PWD specification for electrical Works with ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , IP 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 A rating and 10,000 upto 63 A, 5000 for 80 A rating including making connections, testing etc. as required. . OEM shall have submit NABL / CPRI / ERDA accrediated lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per PWD Electrical BSR 2021 .

Four pole MCB , 40 A- 63A rating

Double pole MCB, 6 A to 32 A rating

Supply Installation testing & Commissioning of ISO certified company made DOL/Star-Delta Starter panel made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. suitable for following rating motors complete in all respect. Appropriate type test certificate / OEM test report shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per PWD Electrical BSR 2021 .

For Three phase Submersible / Mono block pump

3.0 HP to 10.0 HP ( Star / Delta starter )

Providing & Laying of synthetic rope for submersible pump ISI marked (IS:5175) of following sizes. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per PWD Electrical BSR 2021 .

20mm (suitable for 90 mm OD pipe)

Plate Earthing as per PWD specification for electrical Works as per IS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per PWD Electrical BSR 2021 .

Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection with GI/Cu thimble etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per PWD Electrical BSR 2021 .

8 SWG copper Wire

Supply & Laying following size earth strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per PWD Electrical BSR 2021 .

20mm x 3mm copper strip

Providing & Fixing of HDPE pipe ISI mark (IS:4984/2016 ) for water supply (suitable for submersible & jet pump) with required fittings ie socket, elbows, tee etc. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per PWD Electrical BSR 2021 .

50 mm OD 6 kg / cm2

Description of Work / Item(s)

Amount

Supply installation testing commissioning of following Items as per detailed specifications and photographs given in Volume II as per prefered makes in Volume II.

SITC of Acoustic Metal Paneling

SITC Metal Hexagonal Paneling

SITC Metal Printed Metal Paneling

SITC PET Paneling

SITC Paint

SITC Wall Putty

SITC of Acoustic Metal Partition

SITC of modular fabric partition

SITC of straight modular glass partition material

SITC of 12mm thick Frameless tempered clear glass Door

SITC of Metallic Door with door frames/chaukhats (with OR without Vision Panel)

SITC of Designer Metal Baffle ceiling

SITC of Designer Metal Ceiling

SITC Designer Metal Mesh (expanded) Ceiling

SITC of Designer PET Acoustic Panel Ceiling - Linear

SITC of Designer Acoustic Metal False ceiling with Planks

SITC of Designer PET Acoustic Panel Ceiling - Hexagonal

SITC of Designer calcium silicate ceiling

SITC of Designer PET Chandelier

SITC of Designer Acoustic Flooring

SITC of Designer Privacy film for glass partitions & glass door

SITC of Curtains for windows: Roll down curtains

SITC of Sign board

SITC of of Glass Railing

SITC of Batten light

SITC of 2'x2' LED Light Panels (as per Lux Requirement)

SITC of of Round Lights (as per Lux Requirement)

SITC of Cove Lights (as per Lux Requirement)

SITC of designer ceiling light Wipro Vertica/equivalent

SITC of designer ceiling light Wipro Celeste/equivalent

SITC of designer ceiling light Wipro Orbit/equivalent

SITC of Reception Counter Approximate minimum Dimensions – 3000mm(W) X 750mm(D) X 750mm(H).

SITC of 3-Seater Sofa

SITC of 2-Seater Sofa

SITC of Single Seater sofa chair

SITC of Center unit (Type 1) Approximate minimum dimensions – 1200mm(W) X 600mm(D) X 450mm(H)

SITC of Center unit (Type 2) Approximate minimum dimensions – 800mm(W) X 450mm(H)

SITC of Center unit (Type 3) Approximate minimum Dimensions – 600mm(Dia) / 600(W) X 600mm(H)

SITC of Chair Type 1

SITC of Chair Type 2

SITC of Chair Type 3

SITC of Auditorium chair

SITC of workstation Desk (Type 1) Approximate minimum Dimensions – 1200mm (W) X 600mm(D) X 750mm(H)

SITC of workstation Desk (Type 2) Approximate minimum Dimensions – 1500mm (W) X 600mm(D) X 750mm(H)

SITC of workstation Desk (Type 3) Approximate minimum Dimensions – 1500mm (W) X 600mm(D) X 750mm(H)

SITC of workstation Desk (Type 4) Approximate minimum Dimensions – 1000mm (W1) X 1000mm (W2) X 500mm (D) X 750mm(H)

SITC of Metal Storage Approximate minimum Dimensions – 420mm(W) X 450mm(D) X 550mm(H).

SITC of Side Metal Storage Approximate minimum Dimensions – 900mm(W) X 450mm(D) X 550mm(H).

Cabin desk Furniture Top – 2100mm(W) X 750mm (D) X 750mm(H) Side Runner – 900mm(W) X 450mm(D) X 750mm(H) Back Runner – 2100mm(W) X 450mm(D) X 750mm(H)

Cabin desk Furniture Top – 1500mm(W) X 750mm (D) X 750mm(H) Side Runner – 900mm(W) X 450mm(D) X 750mm(H) Back Runner – 1500mm(W) X 450mm(D) X 750mm(H)

SITC of Open Collaborative conference table Approximate minimum Dimensions – 2700mm(W) X 1500mm(D) X 1800mm(H)

Conference/meeting room furniture for (09 Pax) Approximately minimum Dimensions – 2700mm (W) X 1500mm (D) X 750mm(H)

Conference/meeting room furniture for (11 Pax) Approximately minimum Dimensions – 3600mm (W) X 1500mm (D) X 750mm(H)

Conference/meeting room furniture for (13 Pax) Approximately minimum Dimensions – 4200mm (W) X 1500mm (D) X 750mm(H)

SITC of Training table 1800mm

SITC of Meeting table Furniture Approximate minimum Dimensions – 1000mm (Diameter) X 750mm(H)

SITC of Open Collaborative Meeting

SITC of Dining Counter Approximate minimum Dimensions – 1050mm(W) X1050mm(D) X 750mm(H)

SITC of Dining counter Approximate minimum dimensions – 1800mm(W) X 800mm(D) X 750mm(H)

SITC of VIP dining counter Approximate minimum dimensions – 7400mm(W) X 2100mm(D) X 750mm(H)

SITC of Dining Chairs

SITC of VIP Dining Chairs

SITC of Metal Storage Approximate minimum Dimensions – 900mm(W) X 450mm(D) X 1200mm(H).

SITC of Lobby Furniture

SITC of Dining counter Approximate minimum dimensions – 2400mm(W) X 800mm(D) X 750mm(H)

Description of Work / Item(s)

Amount

TOE WALL

Supply and fixing of grey bijolia stone (18mm TH.), on Toe Wall coping (dressed and rubbed) in all respect .

GAZEBO

Supply & installation of marine grade polysteel modular GAZEBO, circular shape & elevation as per the attached design, made of UV stabilized class-1 fire retardant polyster composite with glass fibre reinforcement of 750GSM, self coloured, textured surface finish with scratch resistant aliphatic grade UV stabilized polyurethane paint; Inner frame work made of mild steel hot dip galvanized; All hardwares are to be of stainless steel. To be \individually hand crafted to replicate steel and cast iron and to be installed with ground using foundation boltsas per conceptual picture attached RFP. Each structure of aprox. 6000 kg

PERGOLA

Supply & installation of marine grade polysteel modular pergola, rectangular shape & elevation as per the attached design, made of UV stabilized class-1 fire retardant polyster composite with glass fibre reinforcement of 750GSM, self coloured, textured surface finish with scratch resistant aliphatic grade UV stabilized polyurethane paint; Inner frame work made of mild steel hot dip galvanized; All hardwares are to be of stainless steel. To be \individually hand crafted to replicate steel and cast iron and to be installed with ground using foundation bolts. Each structure of aprox. 7000 kg

Wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. Each structure of aprox. 5500 kg

Supply and fixing of Pergolas in 100 *50 mm MS hollow sections; including MS posts of 100 *100 mm duly fixed and bolted with red oxide and painted in specified colour as per conceptual picture attached RFP

SITTING DETAILS (12 NOS.)

Providing and Fixing of aluminium extrude section of 100mm x 50mm (in wood finish powder coated) closed with cap on both edges.

Providing and fixing of black / brown granite(18mm TH.) on brick Wall (external face ), including coping ,clamps and grooves complete in all respect .

Supplying and fixing of potted plants FRP POTS (from CREDO or similar)including cocopit, plants ,complete in all respect of following models

csw 14.1 (DA GREY)_ATTR VIS(30" dia and of 27"height)

csw 25.1 (DA GREY)_CL PER(18"x18"and of 18"height)

CSW 5.1 (DA GREY)_ROU COMPE(22" dia and of 15"height)

CSW 23.1 (BLACK)_CAV SLI(30"x25" and of 14"height)

HORTICULTURE WORKS

Supplying and planting of trees , shrubs , hedges, palms, groundcovers, creepers etc. including digging of pits , refilling with manure & good earth , anti termite treatment.

Date Palm (8' stam)

Plumeria Alba (8'-10')

Terminalia (12')

Tabebuia Avellanedae (10')

Tabebuia Argentea (10')

Erythrina Indica (8')

Bahunia Blakeana (10')

Murraya exotica (2')

Bougainvelia Globra (1')

Jatropha (2')

Tecoma Gudhi Choudhi(4')

Calliandra (3')

Nerium drawf (1')

Bombex ceiba (12')

Fountain grass (2')

Spaider Lily (1')

Pandanus grass (6")

Zephyranthus Lily (4")

Ixora Singapornisis (3')

Chandini Dwarf (1')

Hibiscus(1')

Tecoma dwarf (1')

Lecophyllum (1')

POTTED PLANTS

Bougainvelia (4')

Plumeria Singapuri(3')

Ficus Panda(3')

Ravenue Palm(3')

Phonix Palm(4')

Cocopit each bag of 25 kg

Vermi Compost eah bag of 50kg

BROWN GRAVEL(0'-4")(HT. OF GRAVEL BED)

PEBBLE in white or grey color of size approx 60mm- 80mm

Supply and fixing of water fountain of 5.00mtrX2.5mtr with following item and specifications with complete internal plumbing (cpvcpipe and fitting for water feature )and electrical works

WFNSeries-nozzle , Type:geyser nozzle for back stage , size 1/2" of SS finish

Angular Valve

WSP Series Submersible pump: 3 phase (kirloskar make) ,WSP 5.00(5HP-SP/60KLPH)

WEB SeriesABS Eye Bull Nozzle of black of EMAUXmake

WLED Series LED Light :WLED 12W-12V (warm white or 3000k)(IP:69)

WLT SeriesLED Transformers:operating voltage12vDC-12W

WCP-EP Series Electric Control Panel with suitable accessories :Automation on/off, indicator , switches,analogmeter, voltmeter lux, fariles MCB, OLR and Connector etc of make L&T.

SIGNAGE

Supply and installation of ARTISTIC SIGNAGE (sagar black stone of 1500mmx2100mm 200mm th with water jet cutting of 12 mm filled with corian) with proper bed preparation in ramped soil with 100 mm M20pcc

TOTEM SIGNAGE: Design, composition, Supply and installation of structural steel frame made out of medium duty 50mm square pipe section, red oxide primer with two coat of synthetic enamel painting, providing and fixing 3/4mm thick polycarbonate sheet with 40% transluency, with graphics on single side digitally printed on UV cured 3M media or 3M external grade binly totens to be intenally illuminated with LED paower module double side, high output 7100k numbers as perdsign, 140 degree at the distance .

SCULPTURE

Supply of sculpture of human of 7.5' height statue with art work finish. Fabrication work in 2 inch square pipr.3mm thickness in all parts of statue (tail,body,head) for solid strength.polyurethane foam filling in statue Die plastic and fiber coat finish at outer surface with 3 coats.fire resistant coating atfull statue.base stand in ms 1.5 feet square plate in 3mm thickness. the sculpture will be supplied as per indicative picture given in the tender document and direction of work .

Supply of Sculpture Of a SWAN of 4.5 ' Height Statue with art work finish in artistic Silver colour. Polyurethane foam filling in statue. Fabrication work in 2 inch square pipe. 3 mm thickness in all parts of statue (tail, body , head) for solid strength. Plastic and fiber coat finish at outer surface with 3 coats. Fire resistant coating at full statue. Base stand in ms. 1.5 feet square plate in 3mm thickness. The sculpture will be supplied as per indicative pictures given in the tender document.

DRIVEWAY & KERB STONE

Providing & fixing of precast cement concrete interlocking paver blocks of M30 grade 60 mm thick from PAVCON/VYARA to be laid and the joint is to be filled with fine sand complete in all respect . 100 MMX 100MMX60 MM dark grey colored pavcon paver blocks 100 MMX 100MMX60 MM light grey colored pavcon paver blocks 100 MMX 100MMX60 MM colored pavcon paver blocks 100 MMX 100MMX60 MM grass paver blocks

Supply and fixing of 18 mm th. Honed finish Black Granite with cutting and edge polish.

Providing & laying at or near ground level , factory made kerbstone of M-25 grade cement concrete, in position to the required line, level and curvature , jointed with cement mortar 1:3 including making joints with or without grooves .

IRRIGATION

LAND DEVELOPMENT

Trenching in specified soil upto a depth of 60 cm. including removal and stacking of serviceable materials and then disposal by spreading and neatly leveling within a lead of 500 metres and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and farm-yard manure before and after flooding with water (excluding cost of imported earth and sludge or farm-yard manure).

Digging holes in all kinds of soil and refilling the same with the excavated earth mixed with well decayed farm yard manure (cost of well decayed farm yard manure to be paid separately).

Holes .90 cm dia, and .90 cm deep

Holes 0.60 m dia and .60 m deep

Holes 0.45 m dia and 0.45 m deep

Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment)

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) :

Screened through sieve of I.S. designation 4.75 mm

Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded).

SPRINKLER , DRIP & HYDRANT IRRIGATION SYSTEM Irrigation of whole site with neccessary plumbing

Piping Network - PVC Providing fixing , installation and testing with trenching and Back filling mainline 600 mm and Submain 450 mm in depth of PVC pipes (IS:4985- 88), and fittings & Accessories like tees, elbows, bends, junctions, Reducers etc of 10kg/cm2 pressure; as required/directed at site ,

PVC Pipe 90 mm x 6 kg/cm2

PVC Pipe 75 mm x 6Kg/cm2

PVC Pipe 63 mm X 6kg/cm2

PVC Pipe 50 mm X 6kg/cm2

PVC Pipe 40 mm X 6kg/cm2

SITE of Drip & Accessories

Providing and Fixing of Landscape Brown Color for recylced water application - 16 mm - 4 Bar Pressure Rating, 1.2mm Thickness, LEED Compliant, PE pipe -together with all required accessories. Make : Netafim / Rain Bird / Metzer

Providing and fixing of Dripline- 16mm 45 CM 3.5 LPH, 4 Bar Pressure Rating, 1.2mm Thickness together with all required accessories. Make: Netafim, Rain Bird, Metzer (Brown Color)

Providing and fixing of Pressure Comp. Bug Dripper 8 LPH Make : Netafim / Toro / Rain Bird

Providing and Fixing of Take Off Connection (Clamp Saddle or Tee + Riser + Threaded Adaptor+ Pipe Sch 1/2")with All fittings & Accessories

G.I. Lateral stake

SITE of Pop Up Sprinkler & Accessories

Providing of Spray Pop-up Sprinkler 4" (4" Pop Up hight from Bottom to Centre of Discharging Nozzle) from (2.4 to 5.4 Mtr Radius) with Check Valve, complete with required nozzle Make : Rain Bird/ Toro/ Nelson

Providing of Swing Joint 1/2" with PP Clamp Saddle Chromed Nut Bolt & Nitrile Rubber Gasket Make: RainBird/Toro/Astore

Valves SITC of Various Valves with required Fittings & Tapping PP Clamp Saddles with Chromed Nut Bolt & Nitrile Rubber Ring

PVC Ball Valve 63mm PN 16 Make: GF / FIP / ASTORE

Butterfly Valve 75 mm (for Main line Isolation) Make: Astore, Italy/ FIP/ GF+

3/4" Quick Couppling Valve

3/4" Quick Couppling Valve Key

PP Saddlet Tee 75 X 3/4" with ASTM Pipe (18" Long)

Saddle 75 MM X 1''

1" Double Acting Air cum Vacum Release Valve Make: Bermad/ARI/Plasson with GM valve 1" Make: NIBCO/Zoloto

PVC Flush Valve 40 mm

Rectangular Valve Box 12" Make: Carson Brooks/Rain Bird

Round Valve Box 10" Make: Carson Brooks/Rain Bird

Round Valve Box 6" Make: Carson Brooks/Rain Bird

Filteration Unit SITC of Disc Filter, 80/110 Micron with all required Accesories

Providing and Fixing of Manual Cleaning Screen Filter capacity of 50 m3/h 3"

Providing and Fixing of G.I. Header with 3 Butterfly Valve

Providing and Fixing of Road Sleeve of various sizes

Trenching & Back Filling with Installation Charges of 450mm x600m with compacting of soil base

STONE BOULDERS

Providing and laying of 4-5 Tonns of weight of stone boulders (random shaped)as per approval .

PLANTER IN COURTYARD

Providing and fixing of black / brown granite(16mm TH.) on brick Wall (external face ), including coping ,clamps and grooves complete in all respect .

GEBION WALL

Providing and fixing of M Steel work welded,in built up sections framed work including cutting,hoisting, fixing in position and applying priming coat of redlead paint in columns, beams and joists, channels, 75mm x75 mm anglestees plates with connecting plates or angle cleats.

Supply and installation of 150 mm dia. Pebbles contained in wire mesh for gabion wall.

Supply and installation of Wire mesh (60 mmx80 mm)2 mm dia wire & 2.2 mm binding wire 12 guage containing pebbles.

Description of Work / Item(s)

Amount

AUDIO SYSTEM

Supply, Installation, Testing & Commissioning of non-powered Three way, minimum Biamp or better Triamp configuation Line array speakers for cinema applications, frequency range: 68Hz to 18 Khz or better, loudspeaker consisting of Min 2 x 8" LF driver or better and 1x 3" HF compression driver or better, Nominal Horizontal Dispersion: 120° or better, Impedence-16/8/4 Ohm; Maximum Peak SPL - HF: 133dB, MF 128dB, LF 128dB, Power Continuous HF: 85 watts or better, MF: 250 watts or better, LF: 250 watts or better. Enclosure Material 15 mm birch plywood. Minimum 4 speakers for one set of line array for better system control and minimum 40° of Vertical dispersion.Complete as per site. (Note: Loudspeakers shall be configured for biamp/triamp operation mode only)

Supply, Installation, Testing and Comminssioning of OEM Supplied Array Frame for Line Array Speakers. Material - Aluminium . 10:1 Design Factor, Complete as per site.

Supply, Installation, Testing and Commissioning of Flyable Line array Subwoofer Module with Minimum 2x12"or better; Frequency response 40 Hz -100 Hz or better; Sensitivity of 99 dB SPL (1W@1M) or better; Max Peak SPL 135 dB or better, Impedance - 4Ohms, continuous Power capacity- 1100watts or better, Construction in birch plywood, complete with standard accessories as per specifications .

Supply, Installation, Testing & Commissioning of 18-inch externally powered subwoofer. Frequency Response (-6 dB) - 37 Hz to 230 Hz or better.Nominal Impedance-4Ω, Power capacity - 800W or better, Sensitivity - 98 dB 1 W@1m or better, Maximum Peak SPL-133 dB or better. Enclosure-Rectangular, plywood, black texture paint finish.

Supply, Installation, Testing & Commissioning of 12-inch, Full range, 2-Way non-powered Loudspeaker. Frequency Range-46Hz – 20kHz or better, Power capacity continuous - 400W or better, Sensitivity-96 dB or better, Maximum Peak SPL-128dB or better, Coverage Angle-85° x 85° or better, LF Driver - 12-inch with 3-inch Voice Coil or better, HF Driver- 1-inch Exit, 1.75-inch voice coil, compression driver or better. Nominal Impedance-8Ω. With OEM supplied mounting bracket,Complete as per site.

Supply, Installation, Testing & Commissioning of 12-inch Two-way active stage monitor loudspeaker. 1000 Watt peak power Class-D amplifier module or better. LF Transducer-12-inch or better, HF Transducer-1.4-inch compression driver or better, Frequency Range - 47Hz - 20 kHz or better, Nominal Coverage Angle- 75° x 65° or better, Maximum rated SPL - 126 dB or better, Indicators for Power, Signal LED, Limiter etc. or better, Complete as per site.

Supply, Installation, Testing & Commissioning of Passive Two-way, wall-mount speaker. Impedance- 8Ω and 70V/100V transformer taps, Frequency Range-60 Hz – 20 kHz, Sensitivity-86 dB or better. Coverage- 130° conical or better, Maximum peak SPL- 107 dB, LF Transducer 6.5-ich or better, HF Transducer - 1-inch or better. Should include the mounting kit.

Supply, Installation, Testing & Commissioning of 4-Channel Class-D Network Amplifier. Network Protocols- Dant/AES67 or similar, Total Power - 8000W or better. Power Sharing or dynamic distribution or power between channels. 16Ω/ 8Ω/4Ω/2Ω and 70V/100V support on individual channels. Amplifier shall support Bridge and Parallel modes for combining multiple channels. Frequency Response (8 Ω)-20 Hz - 20 kHz +0.2 dB / -0.7 dB or better, Noise Weighted output muted->104 dB or better, Front Panel LED with Staus, Control & Configuration, 4 routable mic/line inputs . Ethernet Ports - 2 Gigabit ethernet ports for Audio streaming, control, monitoring and network redundancy.

Supply, Installation, Testing & Commissioning of 8-Channel Class-D Network Amplifier. Network Protocols- Dant/AES67 or similar, Total Power - 8000W or better. Power Sharing or dynamic distribution or power between channels. 16Ω/ 8Ω/4Ω/2Ω and 70V/100V support on individual channels. Amplifier shall support Bridge and Parallel modes for combining multiple channels. Frequency Response (8 Ω)-20 Hz - 20 kHz +0.2 dB / -0.7 dB or better, Noise Weighted output muted->104 dB or better, Front Panel LED with Staus, Control & Configuration, 4 routable mic/line inputs . Ethernet Ports - 2 Gigabit ethernet ports for Audio streaming, control, monitoring and network redundancy.

Supply , Installation , Testing & Commissioning of 48 channel mixing console with stage box, 48-input Mic/Line, Effects, Mid-sweep 3-band mono channel EQ, 4-band stereo channel EQ, 6 buses for flexible signal routing: main stereo bus, four group buses, six auxiliary buses, and send buses for the two internal effect processors, Slot for optional Digital I/O card, CAT 5, Should Support MADI/Dante/cobranet Cards, 32 Channel Stage Box. etc. complete with installation as per the site requirement.

Supply, Installation,Testing & Commissioning of Stage box 42 analogue inputs and 8 line outputs making a 32 x 8 matrix.Complete with installation & acessories as per the site requirement.

Supply, Installation, Testing & Commissioning of Digital Signal Processor with 12 Mic/Line inputs with Phantom Power and 12 Line outputs. Minimum 12 assignable & routable AEC channels. Minimum 8x8 Dante channels and supports up to 128x128 Network audio channels via Dante/AES67 or similar Networked Audio protocol. USB port for USB Audio. Processor shall support Cinema Audio Integration and Network Amplifiers.

Supply , Installation , Testing & Commissioning of Gooseneck Microphone, it should be pre-polarised condenser microphone having Cardioid or better polar pattern, shall have frequency response of 50Hz to 20kHz, length of the gooseneck shall be more than 420mm, Should have Max SPL Level of 125dB or more, it should support phantom power from 12v to 48v, Should come with base having programmable mute/unmute button, Should be RF interference free from other wireless devices, should have muted/unmuted status LED Indication etc complete required as per the specifications.

Supply , Installation , Testing & Commissioning of USB Charger for digital microphone, Should come with slot for charging lithium-ion battery, should charge up to 2 batteries simultaneously, Should come complete with it's power supply etc as required, should be from the same OEM as microphone to ensure compatibility

Supply, Installation, Testing and Commissioning of directional antenna with Impedance:50 Ohm; Connector: BNC; Pick-up pattern: directional; Frequency range: 470 - 1075 MHz ;Antenna gain: 5 dBi or better, should come with connection cable and antenna mounting kit complete as required as per site

Supply, Installation, Testing and commissioning of antenna Cable, the antenna cable should have impedance of 50ohm only, Should be LMR 400 Standard, should be compatible with the wireless microphone system complete as required,

Supply, Installation, Testing and commissioning of Wired Instrument and Vocal microphones.

Supply , Installation , Testing & Commissioning of Blue ray Player , MEDIA COMPATIBILITY: BLUE RAY, DivX, CD-R/-RW/ DVD +R/+RW/-R/-RW,CD-R/R Playback, DVD+R/+RW, DVD+R Dual Layer and as per the specifications, etc complete as required,.

Supply , Installation , Testing & Commissioning of Microphone Stand etc. complete with installation as per the site requirement ( Floor / Table /Boom).

Supply , laying , Testing & Commissioning of Speaker Cable, 4.5 Sqmm stranded ETP high-conductivity copper conductors, PVC insulation, parallel: (1) tinned, (1) bare etc. complete with installation as per the site requirement.

Supply , laying , Testing & Commissioning of Microphone Cable 20 AWG ATC PVC Sheathed

Supply , Installation , Testing & Commissioning of the floor junction boxes on the stage for the various mic inputs with Mic xlr inputs on the boxes .

VIDEO SYSTEM

Supply, Installation, Testing and Comminssioning of Active LED 2.6mm pixel pitch or better with refresh rate not less than 7680 Hz, grey scaling18 bit, 12000:1 contrast ratio , 1200 NITS brightness. Including the powder coated frame complete with video wall controller inbuilt or additional. The cabinets to be front loaded.

Supply, Installation, testing and Commissioning of 43" Professional LED panel display, resolution: 3,840 x 2,160 (UHD), Brightness : 400‐600 nits, Contrast Ratio (Typ.): 4000:1, VIEWING ANGLE (H/V) 178:178, Inputs: HDMIx2, DVI/VGA x1, DPx1, USB x1, Control: Rs232 and RJ45, with built in speakers 10watts x 2, Anti glare, Operating time: 24 x7 application.

Supply, Installation, testing and Commissioning of 75" Professional LED panel display, resolution: 3,840 x 2,160 (UHD), Brightness : 400‐600 nits, Contrast Ratio (Typ.): 4000:1, VIEWING ANGLE (H/V) 178:178, Inputs: HDMIx2, DVI/VGA x1, DPx1, USB x1, Control: Rs232 and RJ45, with built in speakers 10watts x 2, Anti glare, Operating time: 24 x7 application. On proscenium.

SWITCHING AND INTERFACE SYSTEM

Supply, Fabrication Installation and Commissioning of Digital Podium as per Interiors Finish and design to be approved by architect /client. It should have provision to Install Interactive 21" or higher Interactive Monitor, Gooseneck mic, Presentation Plate with HDMI , USB conncectivity, Visualizer, PC, etc, It should have Laptop Tray on Side, Side Tray for Vizualizer, Keyboard and Mouse Tray, Storage for keeping PC etc , front LOGO etc. With castor wheels.

Supply, Installation, Testing and Commissioning of Presentation Plate with 1 x HDMI, 1x DP with Power socket, Transmitter/Receiver kit etc. complete as required.

Supply, Installation, testing & commissioning of Wireless and wired Presentation gateway System, Auto‐switching between the Wired or Wireless Content Output, Supports 1X HDMI input and 1 X HDMI Output, Supports Resolution upto 4K UHD, Customizable welcome screen provides clear instructions for presenters, HDCP 1.4, EDID compliant, complete as per site.

Supplying, installation, testing and commissioning of 4K HD IP PTZ Camera for capturing the Presenter & Audience, minimum 30X Optical Zoom, min 100 Presets, 60 Frames per Second, Ethernet Out, HDMI Out, 3G‐SDI Out, Audio In, RS232/422/Ethernet Controls, 170° ~ +170° Panning angle, ‐30° ~ +90° Tilting angle , Should support PoE.complete as per site.

Supplying, installation, testing and commissioning of recording, switching, mixing and live streaming at 1080p, Built‐in min 4 Inputs (HDMI /IP), HDMI Out, Can record upto any three inputs simultaneously in a single frame, should be able to record and stream simultaneously, Should have inbuilt mixing and switching option between various inputs, should have minimum 1TB inbuilt storage. as per technical specification etc. as required.

Supplying, installation, testing and commissioning of Joystick controller for controlling above PTZ Camera.

PROCESSING AND CONTROL SYSTEM

Supply, Installation, Testing & Commissioning of Software or Hradware based Control System to control devices mentioned in the BOQ via Ethernet/Serial/ GPIO/IR Ports. Shall include perpetual licenses required.

Supply, Installation, Testing & Commissioning of 8.0” PoE, IPS Touch Screen Controller with 16 million colors for In-Wall/Table Mounting. Resolution-1280x720, Brightness-400 Nits, Panel Orientation-Vertical / Horizontal, Power-PoE/ AUX, Universal mounting accessories included. Control System and Touch Panel should be of same OEM.

Supply, Installation, Testing & Commissioning of 10-inch 11th generation IPAD, wireless touch panel with required perpetual license and softwares with programming as required for control of all facilities. The IPAD to be supplied with docking and charging station.

SITC of WiFi Access device.

Supply, Installation, Testing and Comminssioning of Gigabit, L3, 48 port Network switch for AVoverIP with PoE+ ports. Should have advanced QoS and IGMP configuration to support Avover IP deployment. .

Supply, Installation, Testing & Commissioning of 1G HDMI Video Encoder. Inputs- 3 HDMI capable of streaming of 3-HDMI sources simultaneously.Resolution-upto 4K60 4:4:4, Power - PoE and AUX PSU. Ports Connections - RS232, GPIO/IR, Audio Inputs, Audio Output & USB-B port supporting AV USB Bridging for software or web based conferencing applications. Content Protection: HDCP 2.2 compliant, EDID Managament. Dante/AES67/Similar Audio Support.Mounting accessories included. NOTE - If Encoder is capable of streaming only one input, match the qty as per the requirement (9 inputs).

Supply, Installation, Testing & Commissioning of 1G HDMI Video Decoder. Outputs- 2 HDMI capable of scaling and outputting 2 streams simultaneously.Resolution-upto 4K60 4:4:4, Power - PoE and AUX PSU. Ports Connections - RS232, GPIO/IR, Audio Inputs, Audio Output & USB-A and B ports. Content Protection: HDCP 2.2 compliant, EDID Managament. Dante/AES67/Similar Audio Support.Mounting accessories included. NOTE - If Decoder is capable of decoding only one stream, match the qty as per the requirement (12 Outputs).

CABLE, CONNECTORS, ACCESSORIES

Supply , Laying , Testing & Commissioning of 18Gbps HDMI Cables ( 1.8 M)

Supply , Laying , Testing & Commissioning of 18Gbps HDMI Cables ( 5 mtr)

Supply , Laying , Testing & Commissioning of USB Cables ( 3 mtr)

Supply , Laying , Testing & Commissioning of Shielded twisted pair cable complete with installation as per the site requirement.

Supply, Installation, testing & commissioning of 48U Equipment Rack.

Audio System for Lecture and seminar hall

Supply, Installation, Testing & Commissioning of 4.5-inch, 2-way, Full Range, Ceiling-mount loudspeaker. Frequency range - 70Hz-16kHz, Rated Power - 16Watts, Sensitivity-89 dB SPL, Coverage Angle (-6 dB)-140° (500 Hz to 5 kHz), Maximum SPL Continuous/Peak-101dB/107dB, Rated Impedance - 8 Ohms. Transformer Tapping - 70V/100V(16, 8, 4,2 watts).Material - Painted ABS polymer Baffle and Power coated steel grille. Safety rating - UL1480, UL2043. Mounting rails and C-Ring for ceiling tile included.

Supply, Installation, Testing & Commissioning of Quad channel class-D amplifier. Power - minimum 100 watts/channel @8Ω/4Ω or better. Should support 70V/100V.Should have Power sharing between channels or Bridge/Parallel mode to combine a pair of channel for maximum output . Signal to Noise ->100 dB or better, Frequency Response-20 Hz - 20 kHz or better, Input Impedance->10 kΩ (balanced & unbalanced) or better, Front Panel Indicators-Power, per channel Signal, Protect/Limit etc. Better to have Energy Star rating for power saving. Shall include rack and surface mounting brackets.

Supply, Installation, Testing & Commissioning of Dual channel class-D amplifier. Power - minimum 60 watts/channel @8Ω/4Ω or better. Should support 70V/100V.Should have Power sharing between channels or Bridge/Parallel mode to combine a pair of channel for maximum output . Signal to Noise ->100 dB or better, Frequency Response-20 Hz - 20 kHz or better, Input Impedance->10 kΩ (balanced & unbalanced) or better, Front Panel Indicators-Power, per channel Signal, Protect/Limit etc. Better to have Energy Star rating for power saving. Shall include rack and surface mounting brackets.

Supply, Installation, Testing & Commissioning of Audio, Video & Control processor. Video: 3-HDMI Inputs and 2-HDMI Outputs with scaling and resolution up to 4K60 4:4:4. Content protection - HDCP 2.2 compliant, 8-channel PCM HDMI audio embedding/deembedding. Audio: 3.5 mm unbalanced stereo mic/line input and 3.5 mm unbalanced stereo line output. Dante/AES67 Network audio support for up to 32x32 channels. 8 configurable and routable AEC channels @200ms tail length. Control: RS232, GPIO ports for external device control. Dual Gigabit ethernet ports. Power-POE and AUX. Mounting accessories included.. Third Party control can be added as software license or Hardware (i.e., Crestron/Extron) to fulfill the requirement.

Supply, Installation, Testing & Commissioning of 8 Channel Networked I/O Expander.8 Analog Balanced I/O Individually Switchable as Mic/Line Input(w/ phantom power) or Line Output. Dual LAN Port for Redundancy with PoE capability on one LAN Port. Upto 8x8 channel of digital I/O via Audio-to-USB Bridging for direct PC connection via driverless USB connectivity. GPIO Inputs & Outputs & 3 Pin RS232 Connectivity for external device control. Front Panel Display showing System & Network Information. Front Panel ID button for device identification in software. Configuration & Monitoring via PC Software.

Supply , Installation , Testing & Commissioning of Wireless Handheld Microphone set: having Dynamic cardioid or better polar pattern, 40 MHz or more switching Bandwidth, Should have Signal to noise ratio >108dBA or better, Total Harmonic Distortion should be <0.9%, Frequency Response: 80 to 18000Hz or better, RF Sensitivity: < 2.5 μV at 52 dB(A), Should have RF Power of 30mW or more, Should have mute/unmute button, Operating time: up to 8 hours or better

Supply, Installation, Testing & Commissioning of Wireless Lapel Microphone set: having pre polarised condenser microphone with omnidirectional or better polar pattern, 40 MHz or more switching Bandwidth, Should have Signal to noise ratio >108dBA or better, Total Harmonic Distortion should be <0.9%, Frequency Response: 50 to 18000Hz or better, RF Sensitivity: < 2.5 μV at 52 dB(A), Should have RF Power of 30mW or more, Should have mute/unmute button, Operating time: up to 8 hours or better.

Supply, Installation, Tetsing & Commissoning of cardioid condenser gooseneck microphone with Table stand base. Mute/Unmute button and status light ring. Gooseneck length min 40 cm, connector type - XLR, Impedance - <100Ω, Frequency response - 50Hz - 20kHz, Max SPL -130 dB SPL.

DISPLAY SYSTEM

Supply, Installation, Testing and Comissioning of Laser Projector with 5500 Lumens & Short Throw Lens Reproduce True-to-life Images for Totally Immersive ExperiencesHASSLE-FREE INSTALLATION - With V/ H lens shift, 2D keystone and corner fitAMAZING COLOR ACCURACY - 92% Rec 709 color accuracy to see every detail FAST <17ms response enables realistic simulation and gaming5500 ANSI LUMENS FOR Big screens - Will effortlessly fill large screens up to 20 feet wideMAINTENANCE FREE DESIGN - Sealed IP5X laser engine means no dirty projector filters and 20,000 hour laser

Supply, Installation, Testing & Commissioning of Tabtensioned Motorised Projection screen Aspect ratio 16:9 130 to 165 " Diagonal with mounting and standard accessories.

Supply, Installation, Testing and Comissioning of Projector Mount Heavyduty

VIDEO,SWITCHING & INTERFACE SYSTEM

Supply, Installation, Testing and Comminssioning of HDBT Wall Plate Tx/Rx set with 1xHDMI, 1xDP/VGA, RJ45 Ports, complete with Transmitter, Receiver set.

CONTROL SYSTEM & ROOM SCHEDULING

Supply, Installation, Testing & Commissioning of 10" Wireless Touch panel with ratina display with required perpetual license and accessories and wall mount.

Supply, Installation, Testing & Commissioning of 10 port L2 Gigabit POE+ Network Swicth with Multicast support with IGMP V1/V2, QoS support, IPV4/IPV6 Support, Switching Capacity in Gigabits per Second, 1 Gbps Non-blocking ports with standard accessories.

CABLE, CONNECTORS, ACCESSORIES

Supply, Installation, Testing & Commissioning of 18Gbps 4K 30-feet HDMI Cable.

Supply, Installation, Testing & Commissioning of 18Gbps 4K 15-feet HDMI Cable.

Supply, Installation, Testing & Commissioning of 18Gbps 4K 9-feet HDMI Cable.

Supply, Installation, Testing & Commissioning of 18Gbps 4k 3-feet HDMI Cable.

Supply, Installation, Testing & Commissioning of 2 core 2.5 sqmm PVC Sheathed loudspeaker cable.

Supply, Installation, Testing & Commissioning of 2 core shielded balanced microphone cable.

Supply, Installation, Testing & Commissioning o23 W\ AWG Cat6 Cable for AV Network connectivity .

Supply, Installation, Testing & Commissioning of Shielded Cat6 Cable for Digital Conference System connectivity.

Supply, Installation, Testing & Commissioning of Patch Cable & Connectors

Lighting Controls

Supply, Installation, Testing & Commissioning of Processor - This device can be used to manage up to 50 simple and advanced scenarios. Using the scenario programmer, the system canperform certain actions not only following a command by the user but also as a result of external events.Power supply from BUS: 18-27 VdcMax. absorption: 30 mAOperating temperature: 5 – 40 °C RJ 45 for 10/100 Mbit Ethernet LAN

Supply, Installation, Testing & Commissioning of Bus Power supply - This device must be used to supply power to the Lighting Management Systems. On the output, the unit supplies a 27 Vdc continuous low voltage, with a maximum current of 1 A. It is electronically protected (without fuses) against short circuit and overload.

Supply, Installation, Testing & Commissioning of This device is used as a Protection for power supply IN (AC power supply input)Rated voltages: 230 V ±10%Nominal working frequencies: 50 / 60 Hz Stand-by consumption: less than 1 WOperating temperature: 5 – 40 °CIntegrated fuse (IN side): F1 T0,8A 250 OUT (AC power supply output)Rated voltage: 230 V ± 10%Max. rated current: 500 mAWorking frequency range: 50 / 60 Hz

upply, Installation, Testing & Commissioning of Memory module for actuators - This device is used as a memory module is connected to a system and permanently saves the status of all the actuators configured to manage the lights, after each control sent. Power supply from BUS: 27 Vdc from BUS- Operating power supply with SCS BUS: 18 – 27 Vdc- Absorption: 5 mA- Operating temperature: 0 - 40 °C- Dissipated power with max. load: 0.1 W

Supply, Installation, Testing & Commissioning of 4/8 Scene Programmable Keypad Power supply via BUS: 27 Vdc Operating power supply with SCS BUS: 18 – 27 Vdc Current draw: 9 mA

Supply, Installation, Testing & Commissioning of Configurator Set - This device is used in Configuration box with pliers and system plug Configurator box with 10 configurators 0-9 Specifications Model Other

Supply, Installation, Testing & Commissioning of Analogue Dimmer 1-10 V with 4 Outputs/ CircuitsNumber of supply terminal blocks 1 Number of load terminal blocks 4Connection terminalsTerminal type screwTerminal capacity 2 x 2.5 mm2Number of RJ 45 1 Mains voltage 100-240 V~Frequency 50/60 HzLocation category IndoorsProtection index Penetration by solid andliquid matterIP20(installation in an enclosure)Impact resistance IK04Number of modules 10Operating temperature -5°C to +45°CStorage temperature -20°C to +70°C No-load power consumption 1.9 WWeight 320 gZero current breaking yes

Supply, Installation, Testing & Commissioning of Relay Actuator - This device incorporates four independent relays. The actuator may set two of the four relays in interlocking mode, for the control of loads such as rolling shutter motors, curtain motors Number of outputs: 4x2 A Power supply from BUS: 27 VdcOperating power supply with BUS: 18 – 27 VdcAbsorption: 40 mANumber of outputs: 4x2 A

Supply, Installation, Testing & Commissioning of Relay Actuator - This device incorporates two independent relays with a common terminal for the activation of four loads, and includes local control pushbuttons for each individual load. Number of outputs: 2x10A Power supply via BUS: 27 VdcOperating power supply with BUS : 18 – 27 VdcInput: 5 mA (stand-by)55 mA (max - single loads)30 mA (max - interlock)Number of outputs: 2x10AOperating temperature: (0) – (+40) °C

Supply, Installation, Testing & Commissioning of Configuration modules for Keypads

Supply, Installation, Testing & Commissioning of , of Bus cable for Bus inter connection External sheath colour: grey (RAL 7001)External sheath diameter: 5.5 +/0.1mmExternal sheath thickness: 0.8 mmExternal sheath material: PVC (RZ)Number of internal conductors: 2 unshielded twisted flexible conductors withsheathColour of internal conductors: white and blueSheath thickness of internal conductors: 0.60 mmSheath diameter of internal conductors: PVC (R2)Conductor material: red electrolytic copperConductor section: 0.35 mmq (12 x 0.20 mmq)Operating temperature: 15 70°CMaximum short circuit temperature: 150 °CCoil length: 100 m or 500 m

Supply, Installation, Testing & Commissioning of DISTRIBUTION BOX FOR HOUSING BACK END I.E DIMMERS AND RELAYS

Description of Work / Item(s)

Amount

Variable Refrigerant Flow System

Supply, Installation, Testing and Commissioning of air cooled variable refrigerant flow modular type condensing units with anti-corrosion treatment, each comprising of multiple scroll compressors all inverter driven, full charge of refrigerant gas (R-410a), lubricating oil and all accessories as per the specifications. The condensing units shall be suitable to work on both cooling as well as heating mode. The minimum Energy Efficiency Ratio shall be as per ASHRAE STANDARDS 90.1 -2001 table 6.2.1B. The condensing units shall be suitable for operation on 415 ± 10% volts, 50Hz, 3 phase AC power supply.

Outdoor Units

06 HP HEATING & COOLING

08 HP HEATING & COOLING - TOP DISCHARGE

10 HP HEATING & COOLING - TOP DISCHARGE

12 HP HEATING & COOLING - TOP DISCHARGE

14 HP HEATING & COOLING - TOP DISCHARGE

16 HP HEATING & COOLING - TOP DISCHARGE

18 HP HEATING & COOLING - TOP DISCHARGE

20 HP HEATING & COOLING - TOP DISCHARGE

22 HP HEATING & COOLING - TOP DISCHARGE

24 HP HEATING & COOLING - TOP DISCHARGE

30 HP HEATING & COOLING - TOP DISCHARGE

32 HP HEATING & COOLING - TOP DISCHARGE

34 HP HEATING & COOLING - TOP DISCHARGE

Indoor Units VRV

Supply, Installation, Testing and Commissioning of variable refrigerant flow modular type indoor units suitable for R410a refrigerant comprising of all accessories as per the specifications. The indoor units shall be suitable to work on cooling as well as heating mode.The minimum Energy Efficiency Ratio shall be as per ASHRAE STANDARDS 90.1 -2001 table 6.2.1B. The indoor units shall be suitable for operation on 220 ±6% volts, 50Hz, 1 phase AC power supply. Ductable indoor units shall be suitable to handle extent of ductwork as shown in the design drawings and dehumidified air quantity as mentioned in the heat load summary sheet under "Special Conditions". The indoor unit shall be complete with pre filter as per requirement.

Supply, Installation, Testing and Commissioning of variable refrigerant flow modular type HI-Wall units with remote, suitable for R410a refrigerant comprising of all accessories as per the specifications.

Supply, Installation, Testing and Commissioning of variable refrigerant flow modular type 4-way cassette units with remote, suitable for R410a refrigerant comprising of all accessories as per the specifications.

Supply, Installation, Testing and Commissioning of variable refrigerant flow modular type Ductable units with remote, suitable for R410a refrigerant comprising of all accessories as per the specifications.

TREATED FRESH AIR UNITS

Calculated Capacity SP No. of

Tonnage (Cfm) (mm WG) Rows

CENTRALISED REMOTE CONTROL

Supply, Installation, Testing & Commissioning of centralised controller as per specifications to hook up indoor/ outdoor units as mentioned above. The controller shall however be suitable for catering to all the indoor/ outdoor units for the complete including area. Funtions of the centralized controller in brief shall include but not be limited to remote start/stop of units, temperature setpoint control, status monitoring etc.

SPLIT PACKAGES

Supply, Installation, Testing and Commissioning of split type airconditioning units, each comprising of an outdoor and a single indoor unit. Condensing unit shall be complete with hermatically sealed scroll compressor/s, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit shall consist of a fan section with dynamically balanced centrifugal fan/s driven by TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins etc. Enclosures shall be fabricated as specified. The evaporating unit shall be equipped with synthetic fibre filters , insulated drain pan, safety controls, thermostat all complete in a unit. The outdoor unit enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of cowl arrangement for remote aircooled condensers, full refrigerant charge, vibration isolation arrangement and associated electrical work. Three phase units shall be complete with single phase preventer, phase reversal kit, corded control and motor protection device. The unit shall be provided with BMS compatible Kit.

1.5 TR nominal capacity split unit with single high wall type non-ductable indoor unit with cordless control.

REFNET ( Y-JOINT)

Supply, Installation,Testing and Commissioning of following imported fittings to be provided in refrigerant pipe line. Material of construction for fittings shall be similar to refrigerant piping.

Y- joints for refrigerant piping (pair).

Refrigerant Piping FOR VRV

Supply, installation , testing and commissioning of Interconnecting refrigerant copper pipe work suitable for R-410A refrigerant with (19mm/13mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room.(UV Coating for exposed pipe included in cost)

41.3MM (19MM INSULATION)

38.1MM (19MM INSULATION)

31.8MM (19MM INSULATION)

28.6MM (19MM INSULATION)

25.4MM (19MM INSULATION)

22.6MM (19MM INSULATION)

19.1MM (13MM INSULATION)

15.9MM (13MM INSULATION)

12.7MM (13MM INSULATION)

9.5MM (13MM INSULATION)

6.4MM (13MM INSULATION)

Supply, Installation, Testing & Commissioning of copper refrigerant piping complete with closed cell elastomeric insulation material with Class "O" fire rating in tubing form and Electrical work including power wiring associated with the above split packages as required.

Pair of soft refrigerant piping duly insulated for split AC.

Supply and topping up of Refrigerant (R-410A)

Supply, Installation, Testing and Commissioning of PLC based controller for Auto Sequencing of split units with micrprocessor based controls, and complete with all necessary accessories including enclosure, and having facility for configuration of units as per requirement for sequenced Start/Stop as mentioned below:

For two split units.

Drain Piping

Supply, installation , testing and commissioning of upvc drain piping complete with fittings, supports, valve and 6 mm thick closed nitrile rubber foam insualtion as per specifications & drawings.

Providing and fixing piping fittings, supports and insulation

Control Cabling

Supply, laying, affecting connections and testing of the following sizes of control cum transmission wiring to be laid in FRLS PVC conduits between indoor units and outdoor units.

2 core x 0.75 sqmm

GSS Ducting

Supply, fabrication, installation & testing of G.I. sheet metal ducting duly complete with Spliter Damper, vanes etc. as required as per Smacna standard and as per specifications and as per approved shop drawings.

16 gauge SS duct work welded construction. Duct shall have fire rated coating compound. Fire rated coating compound used forconstruction of fire rated duct work shall be protected with minimum 0.7mm to 1mm nominal thickness tested to properties as per the requirements of BS 476: 6 & amp; 7, including non-combustibility Class O and fire propagation - Class 1 surface spread of flame & amp; materials in accordance with building regulations.

Duct Insulation

Supplying and fixing of external thermal insulation on ducts with Cross Linked Closed Cell Polyethylene FR-XPE, Class O fire rating insulation, tape & adhesive as required of following thickness.

13 mm thick Aluminium Metalized Insulation

Acoustic Lining of Duct

Supply, installation & testing of nitrile rubber/sound absorbing sheet (Density 140-180 kg/m³ ) in AC supply air ducts , as per specifications.

10 mm thick

Flexible Connection

Supply, fabricating, installing, and testing of double canvas flexible connection constructed of fire resistant material(FR) as per the drawings /specifications.

AIR TERMINALS

Supplying & fixing of powder coated extruded aluminium Air Grills without volume control dampers as per specification complete as required.

Supplying & fixing of powder coated extruded aluminium Air Grills with volume control dampers as per specification complete as required.

Supplying, fixing testing commissioning of of powder coated aluminium air diffusers without volume control dampers with anti smudge ring & removable core etc as per specification complete as required.

Supplying, fixing testing commissioning of of powder coated aluminium air diffusers with volume control dampers with anti smudge ring & removable core etc as per specification complete as required.

Supplying, fixing, testing & commissioning of Aluminium Volume control collar Dampers to be provided in supply & Exhaust air registers / terminals. as per specifications. etc complete as required.

Supplying, installing and testing of extruded aluminium louvers with bird screen in accordance with approved shop drawings and specifications complete as required.

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, in accordance with approved shop drawings and specifications complete as required.

Supply, Installation, Testing and Balancing of multi-slot type linear slot diffusers as per the approved shop drawings and specifications.

a. Powder coated extruded aluminium diffusers of approved colour & shade.

i. 2/3/4 slot diffusers having width of slots as 25mm.

Supplying, fixing testing & commissioning of Exhaust air disc valve for Toilet Exhaust

Fire Dampers

Providing and fixing of motorised combination fire & smoke dampers of approved make of atleast 90 minutes fire rating as per the specifications. The fire damper shall be complete with electronic temperature sensor interconnection wiring between AHU & dampers. The fire damper shall be located in the supply / return air ducts.The control panel will be such located that the reset can be done easily.

Actuator for fire damper

Control panel actuator, including spring type actuator with smoke sensor and remote indication of fire damper position.

AIR WASHER

Suppling, installing, testing and commissioning of Double skin construction CELLULOSE FILL AIR WASHER giving 90% efficiency at 500 FPM air velocity across pads, factory assembled complete with 18 g G.I. 304 water tank, fans, Cellouse fill, water distribution header, valves , quick fill, CPVC internal piping, pumps, strainers, and necessary fitting.The quoted price shall also include box type pre filters and 2 bend PVC drift eliminators. The fan section shall have imported centrifugal Forward curved blower with belt drive, drive set with v belt, and motor. The motor shall be aligned with blower and suitable for 415 volts, 50 cycles, 3 Phase power supply. (Static pressure shall be 50 mm WG). The AHU shall be complete with all internal cabling/wiring along with suitable rating VFD starter, earthing from motor upto the cable termination box.

DRY TYPE AIR SCRUBBER

Supply, Installation, Testing and Commissioning of Floor Mounted Cabinet Type Dry Scrubber Unit with DIDW Backward curved centrifugal fan. Dry Scrubber unit each comprising of extract air intake section, electrostatic precipitation technology, dry type air cleaner to remove oil, smoke and fumes from exhaust air, as per the Specifications.

Electrostatic section shall be made of 16 gauge galvanised sheet, high bake epoxy powder coated, washable type aluminium mesh filters, stainless steel spiked ionizers to create high voltage DC field, aluminum collector plates which should be alternatively charged positive and negative with large collecting area with 14" deep cell, to work as magnet for charged smoke and oil particles. Average efficiency of 90-95% in single pass as per ASHRAE test method. Electrostatic Precipitator should be able to charge particles from 0.01 micron to 10 microns through solid state power supply. Collector cell should be of permanent type and incorporate slide out facility for easy removal for cleaning. Power supplies shall be 100% solid state UL Listed, Module of capacity 3900 CFM & above shall be equipped with Pulse width modulating (PWM)The system should be fitted with interlock switch for safety . The system should allow connection to a fan section to achieve 500 FPM velocity across the air cleaner.The AHU shall be complete with all internal cabling/wiring along with suitable rating VFD starter, earthing from motor upto the cable termination box.

AXIAL FAN

Supply, installation, testing and commissioning of Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles, vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. The AHU shall be complete with all internal cabling/wiring along with suitable rating starter, earthing from motor upto the cable termination box.

AIR QTY- 6000 CFM, STATIC PR.- 50MMWG

INLINE FANS

Supply, Installation, Testing and commissioning of exhaust air circular /box type fan suitable for Inline mounting comprising of forward curved centrifugal blower complete with induction motor metal clad MCB , canvas connection all compete as required, motor suitable for single phase, 230 volts, 50Hz AC. supply as per specifications of following capacities: Noiselevel should not exceed 65dB(A)at 3 meter in room condition. Fan100-1000cfm circular type and above 1000cfm box type fan section

500 CFM - 30mm Static pressure for Toilet

400 CFM - 25mm Static pressure for Toilet

CO Sensor with PLC Panel

online, continuous monitoring of CO and radicals concentration in ambient air, measuring range: 0-300 ppm CO with electro-chemical galvanic (Gel electrolyte) technology, sensor should be UL2075 certified, response time t90 < 30 sec, capable of providing multiple threshold to identify normal mode, invisible smoke mode and fire mode. It should provide both analog output and digital communication via RS485 serial interface with Modbus RTU. It should be uniquely addressable and suitable for connection in digital communication bus. Enclosure should have minimum fire retardant UL94: V0 rated with IP65 protection. Sensor cell should be plug-in, field replaceable, sensor life expectancy > 7 years, replaceable sensor cell, CE certified. It Should confirm to EMC- Directive 2014/30/EU

CABLE TRAY

Supplying & Fixing of following sizes of GI cable tray duly painted perforated type along with necessary elbows, bends, reducers etc. anchored along the wall / suspended from the ceiling with necessary MS supports. Supports shall be in the form of 40mmx40mmx5mm angles and provided at a distance of 1200mm including grouting in the wall and making good as well.

a. 40 x 50 x 40 x 2mm

b. 40 x 100 x 40 x 2mm

c. 40 x 150 x 40 x 2mm

d. 40 x 300 x 40 x 2mm

e. 40 x 450 x 40 x 2mm

POWER CABLING

Supply, laying, affecting connections & Testing of the following sizes of 1.1 KV armoured PVC insulated aluminium/ copper conductor cables. Cables shall be inclusive conductor cables. Cables shall be inclusive of all clamps, saddles, screws, cable identification tags, cable terminal joints including terminal lugs, insulating tapes, affecting terminal connections to the equipment as per the specifications and as required.

4C x 25 Sqmm cable (Copper)

4C x 16 Sqmm cable (Copper)

4C x 10 Sqmm cable (Copper)

4C x 6 Sqmm cable (Copper)

4 C x 4 Sqmm cable (Copper)

PANEL/TPN BOX FOR OUTDOOR UNITS

Supply and Installation of TPN of appropriate rating in weather proof enclosure near outdoor.

MS STAND FOR OUTDOOR UNITS

Supply, Fabrication and Installation of MS frame using channels/angle iron sections as required for mounting of air cooled remote condenser in service areas or terrace level. The frame work shall be applied with red oxide primer and thereafter, two coats of enamel paint of approved colour. The general arrangement drawing for frame work shall be got approved from the Architects/ Structural Engineers prior to commencement of fabrication

Civil work

Wall opening & repairing for duct, refrigerant pipe etc. of suitable sizes as per site requirement.

Upto 600x600 mm

Above 600x600 mm

Core cut 150MM DIA

Core cut 200MM DIA

Description of Work / Item(s)

Amount

Supply , Installation , Testing and Commissioning of Acrylic Firestop Sealant Hilti CP 606 or equivalent in gaps around non-combustible penetrants like ducts or metal pipes passing Through Penetration on Floor / wall for mechanical services for annular gaps up to 50 mm to provide minimum 2 hours fire rating when subject to the test conditions of UL 1479/ASTME 814 standards as per detailed specifications given in RFP .(13 mm thickness of sealant)

Supply , Installation , Testing and Commissioning of high performance intumescent firestop sealant Hilti FS One max or equivalent make for Floor / wall through penetration for mechanical services around combustible penetrations upto 2 inches like plastic pipes or ducts/pipes with insulation passing through floor to provide minimum 2 hours fire rating when subject to test standards of UL 1479/ASTM-E 814 as per detailed specifications enclosed .

Supply , Installation , Testing and Commissioning of intumescent flexible firestop wrap strip Hilti CP 648 E or equivalent make for Floor / wall through penetration for mechanical services like for plastic pipe, insulated pipe and various non-metallic penetrations from 2" to 6" diameter passing through floor slab to provide minimum 2 hours fire rating when subject to test standards of UL 1479/ASTM-E 814 as per detailed specifications given in RFP . the work should be executed considering wraps on both sides of wall

Plastic Pipe diameter of 2.5'' (CP 648-E Firestop Wrap), Min. recommended hole dia. in floor: 92 mm

Plastic Pipe diameter of 3'' (CP 648-E Firestop Wrap), Min. recommended hole dia. in floor: 112 mm

Plastic Pipe diameter of 4'' (CP 648-E Firestop Wrap), Min. recommended hole dia. in floor: 132 mm

Plastic Pipe diameter of 5'' (CP 648-E Firestop Wrap), Min. recommended hole dia. in floor: 152 mm

Plastic Pipe diameter of 6'' (CP 648-E Firestop Wrap), Min. recommended hole dia. in floor: 202 mm

Supply , Installation , Testing and Commissioning of ready-to-use firestop collar Hilti CP 644, or equivalent make for Floor / wall through penetration for mechanical services made of a galvanized steel housing and intumescent inserts for firestopping large combustible pipes with diameters from 7" (177 mm) up to 10" (250 mm) passing through floor slab to provide minimum 2 hours fire rating when subject to test standards of UL 1479/ASTM-E 814 as per detailed specifications given in RFP . The work should be executed conidering collars on both sides of wall s

Plastic Pipe diameter of 7'' (CP 644 Firestop Collar)

Plastic Pipe diameter of 8'' (CP 644 Firestop Collar)

Plastic Pipe diameter of 9'' (CP 644 Firestop Collar)

Plastic Pipe diameter of 10'' (CP 644 Firestop Collar)

Supply , Installation , Testing and Commissioning of Fire stop mortar system Hilti CP 636 or equivalent make Through Penetration on (Medium to large size i.e. > 4" gaps) For through penetration for wall / floor mechanical and electrical services , with minimum 2 hours fire rating when tested in accordance with UL 1479/ASTM-E 814 standards, for horizontal openings in floors or slabs after passing service lines like cables/cable bundles, cable trays etc. as per detailed specifications given in RFP . The material should be applied considering 65 mm thk mortar with 0% occupancy.

Supply , Installation , Testing and Commissioning of rodent and termite proof Fire Barriers Hilti CFS COS ( Composite Sheet) system or equivalent make for 2 hours fire rating when tested in accordance with ASTM E 814/UL 1479 standards - Under Panel Sealing (Medium to large size i.e. > 4" gaps) For through penetration for wall / floor mechanical and electrical services The Composite Sheet 3.81 mm thick, bonded with organic/inorganic fire-resistive elastomeric #SS 304 (Stainless steel) sheet. One side it should be bonded with 26 gauge #SS 304 (Stainless steel) sheet and the other side it should be reinforced with hexagonal shaped #SS 304 (Stainless steel) wire mesh and covered with aluminium foil for the penetrants and the big opening as per detailed specifications given in RFP .

Supply , Installation , Testing and Commissioning expanding firestop foam Hilti CP 620 or Equivalent make , with minimum 2 hours fire rating when tested in accordance with UL 1479/ASTM-E 814, for through Penetration on wall / Floor for sealing inaccessible, complicated or annular gaps openings for horizontal openings in floors or slabs made of concrete/ masonry or Gypsum after passing service lines like cable trays or cables/cable bundles as per detailed specifications given in RFP .

Supply , Installation , Testing and Commissioning of Firestop Factory-assembled cable device Hilti Speed Sleeve (CP 653 BA) or Equivalent make for Communication Cables Sealing with repenetrating facility for floor / wall , containing an intumescent material and a flexible cloth which limits the warm and cold smoke propagation to less than 1 CFM per device for passing cables through floor slab to provide minimum 2 hours fire rating when subject to test standards of UL 1479/ASTM-E 814. No additional material shall be required for adding or re-moving cables after the first installation as per detailed specifications given in RFP ..(Note: for server rooms and data centers and areas where frequent maintenance is required as directed by engineer in-charge. )

CP 653BA (2" Size)

CP 653 BA (4" Size)

Supply , Installation , Testing and Commissioning of Acrylic Firestop Sealant Hilti CP 606 or Equivalent make in gaps between wall and slab made of concrete/masonry/gypsum on both sides of wall to provide minimum 2 hours fire rating when subject to the test conditions of UL 2079 & ASTM E 1966 standards with Min. movement capability of +_12.5%. as per detailed specifications given in RFP .( measurements will be based Consideting 25mm joint width and 1 R Mtr length with 13mm thickness on both sides of wall )

Supply , Installation , Testing and Commissioning of sprayable Fire-rated joint spray Hilti CFS SP WB or Equivalent make in gaps between vertical concrete/masonry wall and deck slab to provide minimum 2 hours of fire rating when tested as per UL 2079 standard as per detailed specifications given in RFP . (measurements will be made on R mtr Considering 100mm joint width & 3 mm WFT, wet film thickness )

Supply , Installation , Testing and Commissioning of silicone based firestop Sealant Hilti CP 601S or Equivalent make in horizontal & vertical movement or expansion joints to provide minimum 2 hours fire rating along with movement capability of +_25% when subject to the test conditions of UL 2079 standards as per detailed specifications given in RFP .(Measuremet will be made on R mtr Considering 50 mm joint width and 13mm thickness on both sides of wall)

Supply , Installation , Testing and Commissioning of intumescent based coating Hilti CP 678 or Equivalent make on internal cables/bunch cables & cable tray for at least 1 mtr in every 14 Mtrs for horizontal runs and to entire length of vertical runs . The coating shall have a density in the range of 1.2 to 1.4 Kg/ L. The coating shall be non-toxic, asbestos and halogen free and shall have good mechanical strength as per detailed specifications given in RFP . . (measurement will be made by R mtr x Diameter of cable in Mtr giving area in Sq mtr )

Supply , Installation , Testing and Commissioning of ablative coating Hilti CP 679A or Equivalent make on external cable/ bunched cables in enclosed and semi-enclosed cable runs to be coated at least 1 mtr in every 14 mtrs of cable runs for the horizontal runs and to entire length of the vertical run as per IEC 60332 part.3 tested by DNV' interpretation of SOLAS 1974 as per detailed specifications given in RFP . (measurement will be made by R mtr x Diameter of cable in Mtr giving area in Sq mtr )

Supply , Installation , Testing and Commissioning of All cables penetrations of fire-rated walls or floors shall be sealed with a Hilti CFS CTS (multi-cable transit block) or Equivalent make system for use in multi-cable transit frames. The multi-cable transit system should cover all cable diameters from 4 core 6 Sq mm to 400 Sq mm , #.5 core with a module adapter system where no peeling of single layers is necessary as per detailed specifications given in RFP . (only for high tension cable wires )

Description of Work / Item(s)

Amount

SEWAGE TREATMENT PLANT, Capacity : 70 KLD.

Note : The Tender for this work is on the basis of Lump Sum Turnkey basis. Contractor must include all items that are necessary and essential to provide a complete working plant to the satisfaction of Engineer in charge. The BOQ given hereafter is only for the purpose assessing the overall costing of the Project and will be used for arriving at the payment schedule to the contractor. The complete operation of the Sewage treatment plan is Automatic.All pumps and blowers are auto in operation., excepts valves which are manual.

Preliminary Works

Shop Drawings.

Detailed GA drawing, flow diagram, equipment list, power load requirement

Design, calculations of all elements of the plant, electrical and mechanical work to satisfy adequacy of design

Submission of detailed GOOD FOR CONSTRUCTION' stage architectural, structural, construction, electrical, mechanical and piping drawing for approval.

Sewage Treatment Plant

Design, Supplying, Installing, Testing & Commissioning of Sewage Treatment Plant capacity 70 KLD. The plant proposed shall be 70 kld with a main pump room. The plant is proposed to be installed in the Basement along with the pump room for better maintenance. Adequete opening shall be provided for this purpose, following shall be considered as basis for the plant design:

Nature of effluent - Domestic Sewage from Toilet use and kitchen waste water.

Anticipated effluent parameters before treatment:

PH 7.5 - 8.5 BOD 250-400 mg/lt SS 200-450 mg/lt. COD 600-800 mg/lt. Oil & Grease upto 50 mg/lt

Desired Sewage discharge standard after ACF are as below: PH 6.5 – 8.5 BOD5 Less than 20 Mg/L S. Solids Less than 40 Mg/L COD Less than 50 Mg/L Oil & Grease Less than 5 Mg/L Ecoli < 103 MPN Nitrogen - 50 Mg/L

Desired Sewage discharge standard after UF are as below: PH 6.5 – 8.5 BOD5 Less than 5 Mg/L S. Solids Nil COD Less than 40 Mg/L Oil & Grease Nil Ecoli Absent Nitrogen - Less than 10 Mg/L

Sewage treatment plant shall include the following items:

Bar Screen Chamber

Sewage equalization tank/sump(In Civil clinets scope)

MBBR Tanks(In Civil clinets scope)

Settling/ Clarifier Tank(In Civil clinets scope)

Clear Water tank(In Civil clinets scope)

Softener Feed PUMPS (if required)

Recycled / Soft Water tank(if required)

Sludge Holding Tank(In Civil clinets scope)

Plant Room Sump

Filtration through MGF & ACF Ultrafiltration plant

Air Blowers, Pumps & equipment

Piping, valves etc

Electrical Panel & Cabling

Common plant room adjacent to STP.

All piping, valves & level indicator/controller etc. within plant room.

Supply, installation, testing & commissioning of 2 Nos Stainless Steel Perforated Screen with suitable lifting arrangement (size 600 mm wide x 1200 mm high approx)

Supply, installation, testing & commissioning of electronic type level indicator and controller for automatic operation of the system with high/low level alarm complete with auxiliary NO/NC contacts.

Contractor/Vendor shall ensure submission of detailed GA drawings (Plan & Section), P & I diagram, schematic diagram for the above mentioned components and additional components such as inserts, puddle flanges, vent pipes etc. if so required for the complete work.

Supply, installation, testing & commissioning of non clogging type pumps, having C.I. casing & bronze impeller complete with all accessories, motor of required capacity. Delivery header with isolation valve, pressure gauge on delivery line with isolation cock level controller with wiring to control the level of sump automatically. Pump shall have following duty.

Self Primimg Transfer Pumps (2 Nos. - One working & one standby) (Solid handling Cap. 40 mm) Flow rate (each) = 5.5 m3 / hr Head = 10-12 Mtr

Plant room sump pump 2 Nos (1 working + 1 standby).

Flow rate = 5.0 cum/hr Head = 10-12 Mtr (Solid handling size for this pump shall be 20 mm).

Mono block (Self Primimg)centrifugal Sludge Recirculation Pumps (2 Nos. - One working & one stand by)

(Solid handling cap. 20 mm) Flow rate (each) = 6 m3 / hr Head = 8-10 Mtr

Cost shall be inclusive of PVC flexible Hose pipe ( for piping submerged in effluent) with M S epoxy piping (for piping non-submerged in effluent)

Provision of guide ropes to guide submersible pump from upper level to operational level in sump basin with channels / angle section of MSEP shall be made by the STP contractor.

Supply, Installation, testing & commissioning of Air diffuser system with 2 nos. twin lobe -type air blower of capacity 180 Cum/hr at the pressure of 0.5 kg/cm driven through “V” belt or directly coupled through flexible coupling to TEFC motor of suitable HP for 415 + 10 volt ,3phase,50cycle AC supply including fine and Coarse bubble membrane type diffusers complete with valves & air distribution grid, flexible pipie etc. complete as required.(1 working+ 1 standby)

Air piping shall comprise of pipes droppers/ laterals with M S Class "B" (epoxy coated)/CPVC (Under water)Header complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc cutting chases & making good.

Aeration system shall be provided for Equalization Tank, and Reactor Tank.

Providing and fixing all piping (as described below) and isolation control valves for making the system complete.

SS 316L :Submerged air piping

MS Epoxy : Air piping/ CPVC (For Under Water)

PVC piping :Pumped effluent & tank overflow pipe line

Supply, installation, testing and commissioning of Media for Aeration Tank (As Required)

Supply, installation, testing and commissioning of Tube Pac Media for Sludge Settling Tank

Supply, installation, testing and commissioning of Hydraulic operated Filter Press of 18 Plates of size; 24"x24", with sludge tray and Filter Press Feed Screw Type Pumpset of capacity 4.5 m3/hr 2 Nos. (1W + 1S) with interconnecting piping and air line connection complete.

Supplying, installing, testing & commissioning of centrifugal vertical inline filter feed water pumps SS-304 casing, S.S 304 impeller and SS-304 shaft, C.I. Base CED coating & head TEFC motor (with mechanical seal). Pressure gauge with isolation cock, NRV, Isolation valve on delivery line. Isolation valve, strainer at suction. The pump shall be suitable for 415 ± 10% volts, 3 phase, 50 cycles a/c supply.

Capacity :5 M3/hr.

Head : 30 M

No. of Pumps (1 working + 1 standby)

Supplying, installing, testing and commissioning of MS vessel filter(5mm thikness) with frontal piping and associated valves and accessories. Filter shall be suitable for a minimum working pressure of 6.0 kg / cm2 and shall include media, standard fittings like pressure tight manholes, initial charge of media, raw water distributor, under drain system, face piping, pressure gauges etc.,

The Multi-grade filter shall be constructed of FRP material with inner shell of integrated polyethylene, polypropylene and other material as per manufacturer's standard.The inter distribution system and the underbed draw off system shall be of Hub & Lateral type of polypropylene material. The filter shall be provide with manhole cover, hand hole, flanged outlet for piping/valve connection and adequate tripod with skid self supporting structure for making the installation completed. The filter shall also be provided with vacuums breaking connection / accessories to avoid any collapse of internal lining. All filters shall be provided with lifting lugs and making the installation completed as required.

Capacity - 5.00 m3/hour

Filtration rate (approx) - approx. 15.0 m3/hr/m2)

Filter dia (approx.) - 600 mm

Working pressure - 4.0 Kg/Sq.cm

Test pressure - 7.0 Kg/Sq.cm

The Activated Carbon filter shall be constructed of FRP material with inner shell of integrated polyethylene, polypropylene and other material as per manufacturer's standard.The inter distribution system and the underbed draw off system shall be of Hub & Lateral type of polypropylene material. The filter shall be provide with manhole cover, hand hole, flanged outlet for piping/valve connection and adequate tripod with skid self supporting structure for making the installation completed. The filter shall also be provided with vacuums breaking connection / accessories to avoid any collapse of internal lining. All filters shall be provided with lifting lugs and making the installation completed as required.

Capacity - 5.00 m3/hour Filtration rate (approx) - approx. 12.0 m3/hr/m2) Filter dia (approx.) - 800 mm Working pressure - 4.0 Kg/Sq.cm Test pressure - 7.0 Kg/Sq.cm

Ultra filtration (UF) System

No of Pumps – 2 (1 working + 1 stand by)

Type of Pumps – Vertical inline multistage

Feed Flow rate of pumps – about 4.5 cum/hr

Head – 20 meters (2.0 bars)

MOC – CI with SS internals

Bag filter or Cartridge filter – 1 set

MOC of housing – PP

Type of Bag / Cartridge - PP 5 micron

Feed flow rate – about 12.5 cum/hr

Product flow rate – about 4.25 cum/hr

Recovery – around 90%

No of UF membrane – 2 nos (Outside In)

Type of UF membrane – Hollow fibre

Piping within the unit – UPVC / CPVC with the valves, solenoid valves for automation

Control Panel – MS powder coated

CIP system – HDPE tank @ 750 liters with electronic dosing pump (1 set)

CIP skid - MSEP with necessary connection and accessories

Air Scouring – Tourbo Air Blower – 1 HP approx

MOC of Blower – MSEP / CI

Backwash pumps - 10cum/hr (1w+1s)

Instrumentation

Supply installation of Electromagnetic flow metre at Inlet and Outlet of STP

Supply installation of Ph at Outlet of STP

Electrical Installation

Motor Control Centre

Incoming

70 amps TPN MCCB with the following accessories:

Phase indicating lamps shall be protected by 2 amp SP MCB 3 Sets

Bus Bar

70 amps TPN (10 KA) copper bus bar with heat shrinkable insulation sleeves.

Spare MCB’s of following capacities:

32 amps TPN MCB’s 6Nos.

Necessary cable alleys, internal / cabling, wiring, cabling from MCC to various pumps / equipment and interlocking, earthing for all equipment shall also included

All MCCBs / MCBs shall be of 10 KA breaking capacity and suitable for motor duty application.

All motor starters shall be provided with Automatic level controller

DOL starters shall be used for motors below 7.5 HP and Star-Delta Starters for other motors .

Provision shall be made for providing potential free contacts to all pumps starters & shall be compatible to BMS with open protocol

MCC for all STP equipments/pumps as described in sub head II

TOTAL JOB AS PER AOBVE SEPCS.

Description of Work / Item(s)

Amount

Fees for following consultant along with their representatives at site to accomplish the job related to Building and to submit the conceptual, working and as built drawings

Fees for Vendor appointed structural consultant for entire project

Fees for Vendor appointed architect

Fees for Vendor appointed landscaping consultant

Fees for Vendor appointed MEP consultant for jobs of Electrical, HVAC, IBMS, Fire Fighting, plumbing, etc. for services as per BOQ attached

Fees for Vendor appointed GRIHA/ IGBC consultant for 5-star rating of the Building

Fees for Vendor appointed MoEF consultant

Fees for Vendor appointed Structural/ Data cabling consultant

Fees for vendor appointed remaining services other than above mentioned as per BOQ

Liasoning charges for below approvals, the necessary statuary charges will be paid by the department

Municipal plan approval, Completion cum occupancy certificate (JoDA / JoMC) approvals

Fire & Sewarage: JoMC

Electrical Inspector, Government of Rajasthan

Public Health and Engineering Department for Water supply &water Test report

Airport authority

Environmental Clearance from Pollution control Board, Rajasthan

Electrical Load clearance from JdVVNL

Description of Work / Item(s)

Amount

Annual maintenance charges for following services as per the installation carried out by the bidder at the time of sign off and details of which is given in BOQ for following service s including all spares and consumables . The period will be counted after two years of Guarantee Period . ( for Two years after signing off the maintenance will be in scope of Contractor without any charges to Department ) 1.Comfort Air conditioning and ventilation 2.Elevators 3.IBMS including CCTV , Fire Detection , Fire suppression, Access control 4.Fire Hydrent and Fire Sprinkler services 4.DG Sets and HSD Tanks . 6 Transformers and HT panels , RMU , HT cables 7. All types of LT Cables and panels , Outdoor panels and all internal Electrical , Earthings jobs described in BOQ . 8 UPS and LAN Services 9.interior &Furniture 11.Civil and Plumbing services , WTP , STP , RO Water landscape 12 Solar 13 Audio & video , Auditorium articles , 14 All other items installed by bidder FOR Rajiv Gandhi Knowledge Science and Innovation Hub as mentioned in BoQ 1-17

1 st Year after completion of 2 years of Guarantee Period from date of signing off

2 nd Year after completion of 2 years of Guarantee Period from date of signing off

3 rd Year after completion of 2 years of Guarantee Period from date of signing off

Annual Operation charges for following services as per the installation carried out by the bidder at the time of sign off and details of which is given in BOQ for following service s. As per the final measured quantities . The period will be counted after signing off . The details of Manpower required is given in Technical specifications . The maintenance should be carried out by the maintance schedules and maintenance manual given by OEM and original manufacturar of the items installed. The details of manpower required during Operation & Maintenance is given in RFP 1.Comfort Air conditioning and ventilation 2.Elevators 3.IBMS including CCTV , Fire Detection , Fire suppression, Access control 4.Fire Hydrent and Fire Sprinkler services 4.DG Sets and HSD Tanks . 6 Transformers and HT panels , RMU , HT cables 7. All types of LT Cables and panels , Outdoor panels and all internal Electrical , Earthings jobs described in BOQ . 8 UPS and LAN Services 9.interior &Furniture 11.Civil and Plumbing services , WTP , STP , RO Water landscape 12 Solar 13 Audio & video , Auditorium articles , 14 All other items installed by bidder FOR Rajiv Gandhi Knowledge Science and Innovation Hub as mentioned in BoQ 1-17

1 st Year after signing off

2 nd Year after signing off

3 rd Year after signing off

4 th Year after signing off

5 th Year after signing off

Description of Work / Item(s)

Amount

Providing, fixing, testing and commissioning of white vitreous china wall mounted type European water closet with C.P. bolts, nuts, C.I. chair (painted with two coats of enamel paint over a coat of primer) or other hanging arrangements, built-in exposed white vitreous china low volume compatiable cistern with C.P. bolts, nuts, supporting arrangements, bakelite / poly propylene seat & cover with C.P. hinges & rubber buffers, complete with all accessories. Including cutting & making good the walls & floors wherever required. KHOLAR MAKE /JAQUAR(Vignette) MAKE COLOR WHITE SIZE 390X570X365MM or equivalent

Providing, fixing, testing and commissioning of white vitreous china wall mounted type European water closet with C.P. bolts, nuts, C.I. chair (painted with two coats of enamel paint over a coat of primer) or other hanging arrangements, built-in exposed white vitreous china low volume compatiable cistern with C.P. bolts, nuts, supporting arrangements, bakelite / poly propylene seat & cover with C.P. hinges & rubber buffers, complete with all accessories. Including cutting & making good the walls & floors wherever required. KHOLAR MAKE /JAQUAR(SOLO) MAKE COLOR BLACK SIZE 375X520X400MM or equivalent

Providing, fixing, testing & commissioning of concealed type cistern(low flow as per ECBC) with dual flush facility comprising of actuator button facia assembly including brass / SS screws and washer complete, providing protection cover over cistern, cutting and making good the walls wherever required. Make : Gabrit /Viega

Providing & fixing C.P brass toilet paper holder with Flap & C.P. brass screw complete as required. Jaquar Make

BLACK MATT ,Jaquar ACN-BLM-1153N or equivalent

GOLD BRIGHT ,Jaquar ACN-GBP-1153S or equivalent

GOLD DUST,Jaquar ACN-GDS-1153SMI or equivalent

ANTIQUE COPPER,Jaquar ACN-ACR-1153 or equivalent

Providing, fixing, testing and commissioning of 15 mm dia C.P. brass 2 way cock with C.P. wall flange of approved quality and making good as required.Jaquar Make

BLACK MATT Jaquar OPP-BLM-15041PM or equivalent

GOLD BRIGHT Jaquar OPP-GBP-15041PM or equivalent

GOLD DUST Jaquar OPP-GDS-15041PM or equivalent

ANTIQUE COPPER JaquarOPP-ACR-15041PM or equivalent

Providing, fixing, testing and commissionin Hand shower(Helth faucet) with 8 mm dia 1 mt long PVC tube &wall hook complete

BLACK MATT Jaquar ALD-BLM-573 or equivalent

GOLD BRIGHT Jaquar ALD-GBP-573or equivalent

GOLD DUST Jaquar ALD-GDS-573 or equivalent

ANTIQUE COPPER Jaquar ALD-ACR-573 or equivalent

Providing, fixing, Twin Coat hook

BLACK MATT Jaquar ACN-BLM-1161N or equivalent

GOLD BRIGHT Jaquar ACN-GBP-1161N or equivalent

GOLD DUST Jaquar ACN-GDS-1161NMI or equivalent

ANTIQUE COPPER Jaquar ACN-ACR-1161 or equivalent

Providing, fixing, testing & commissioning of viterous china Indian type (Orissa pattern) water closet set in cement concrete 1:2:4 mix (1 cement: 2 coarse sand : 4 stone agrregate 20 mm nominal size) with 100 mm dia C.I. deep seal trap including cutting and making good the wall & floors complete as required.

Providing, fixing, testing and commissioning of exposed plastic low level cistern for WC, with dual flush facilit,y complete with all necessary fittings, flush pipes & accessories including all supports and making good.

Providing & fixing first quality white vitreous china oval / round / square wash basin table top (size as per architectural drawing) for under counter mounting, specially fabricated CI / MS brackets, painted with two or three coats of enamel paint of approved shade over a coat of primer, 32 mm CP brass waste and CP brass cast bottle trap and pipe to wall with CP brass flange and rubber adopter for waste connection complete including filling gap between counter and wash basin with approved type poly sulphide sealant, cutting and making good the walls wherever required. Make Kholar / JAQUAR JDR-WHT-25911 420x420X150 OR EQUILENT SIZE

Providing & fixing first quality white vitreous china oval / round / square wash basin table top (size as per architectural drawing) for under counter mounting, specially fabricated CI / MS brackets, painted with two or three coats of enamel paint of approved shade over a coat of primer, 32 mm CP brass waste and CP brass cast bottle trap and pipe to wall with CP brass flange and rubber adopter for waste connection complete including filling gap between counter and wash basin with approved type poly sulphide sealant, cutting and making good the walls wherever required. Make Kholar / JAQUAR BLACK JDS-BLM-25911 420x420X150 OR EQUILENT SIZE

Providing, fixing, testing and commissioning of Basin PILLAR COCK WITH 200mm EXTENSION BODY Tall type (Rate Only)

BLACK MATT Jaquar OPP-BLM-15021PM or equivalent

GOLD BRIGHT Jaquar OPP-GBP-15021PM or equivalent

GOLD DUST Jaquar OPP-GDS-15021PM or equivalent

ANTIQUE COPPER Jaquar OPP-ACR-15021PM or equivalent

Providing, fixing, testing and commissioning of C.P. brass angle valve with C.P. wall flange, Nut and Washer etc. complete as required.

15mm Bib Cock long body

Providing, fixing, testing and commissioning of white viterous china large flat back / half stall urinal supported by CI / MS bracket (duly painted with 2 coats of paints over a coat of primer), including CP brass waste with dome type grating, CP cast brass bottle trap with extension piece, wall flanges complete with all accessories. Kholar make Color wihte or equivalent

Providing, fixing, testing and commissioning of Black viterous china large flat back / half stall urinal supported by CI / MS bracket (duly painted with 2 coats of paints over a coat of primer), including CP brass waste with dome type grating, CP cast brass bottle trap with extension piece, wall flanges complete with all accessories. Kholar make Mat Black Color or equivalent

Providing, fixing, testing and commissioning of automatic flushing systems for urinal to ensure pre-flush & flushing only immediately after use, comprising of all plumbing, electronic and electrical items. CP brass flush pipe with CP brass elbow, CP brass spreader, CP wall flange, infrared photo cells, eyes electrically operated solenoid valve, step down transformer / equipment and any other item required to provide satisfactory functioning. Including necessary wall cutting / chasing and making good, as required. Make Kholar/TOTO or equivalent color white

Providing, fixing, testing and commissioning of automatic flushing systems for urinal to ensure pre-flush & flushing only immediately after use, comprising of all plumbing, electronic and electrical items. CP brass flush pipe with CP brass elbow, CP brass spreader, CP wall flange, infrared photo cells, eyes electrically operated solenoid valve, step down transformer / equipment and any other item required to provide satisfactory functioning. Including necessary wall cutting / chasing and making good, as required. Make Kholar/TOTO or equivalent color Black

Providing, fixing, testing and commissioning of sink supported by C.I./M.S. Brackets (duly painted with 2 coats of paint over a coat of primer) C.P. cast brass bottle trap with extension piece, rubber adaptor, wall flange, union, C.P. brass chainrubber plug & making good.

Stainless steel sink with drain board.(Size 900 X 600mm)

Providing, fixing, testing and commissioning of C.P. brass wall / counter mounted sink mixer with C.P. wall flange, overhead swinging spout complete as required and making good.

Providing & fixing storage type water heater of approved shade with copper container, glasswool insulation,stove enamelled M.S jacket, thermostatically controlled inner heater with pilot neon lamps, angle valve on inlet connection, 15mm dia C.P flexible connection pipe in inlet & outlet suitable for working pressure of 5 kg/sqcm complete as required.

Capacity 15 litres

Providing & fixing storage type water cooler of the following capacity, I.S.I marked, stainless steel front panel, C.P brass push cock, inlet float valve with all plumbing and electrical accessories, inlet, outlet, overflow and PVC drain out connection to F.D complete as required.

Cooling capacity 15 Lts./hr Having Storage capacity of 40 Lts.

Cooling capacity 40 Lts./hr Having Storage capacity of 80 Lts.

Providing and fixing solid state, no touch operting, fully hygienic hand drier of approved shade with single blower, with time delay, summer & winter control, music while drying, volume ON/OFF controls including providing necessary brackets, cable from drier to Plug, Plug top key and lock etc, complete as required.

Providing & fixing C.P. brass towel rail with C.P. brass wall brackets & C.P brass screws complete as required of size below.

Size 600 x 20 mm size

Providing & fixing C.P. brass liquid soap container with PVC rawl plug & C.P. brass screw complete as required.

BLACK MATT ACN-BLM-1137N or equivalent

GOLD BRIGHT ACN-GBP-1137NMI or equivalent

GOLD DUST ACN-GDS-1137N or equivalent

ANTIQUE COPPER ACN-ACR-1137N or equivalent

Providing & fixing C.P brass deodourizer.

Providing, fixing, testing and commissioning of 15 mm dia C.P. brass bib cock with C.P. wall flange of approved quality and making good as required.

Providing, fixing, testing and commissioning of C.P. brass angle valve with C.P. wall flange, Nut and Washer etc. complete as required.

Providing, fixing, testing and commissioning of C.P Copper connection 375 mm long including nuts and washers and making connection to fixtures and fittings complete as required.

Providing and fixing 35 mm dia powder coated steel grab bar.

paper towel dispenser wall mounted Jaquar

B. COLD WATER SUPPLY : (INTERNAL / EXTERNAL)

Providing and fixing CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (operating pressure - 7 Bar @ 82 Deg C and 28 Bar @ 23 Deg C)for pipes from 1/2 Inch to 2 Inch. Schedule 80 Pipe to be used from 2-1/2 Inch to 6 Inch. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.(All Terrace Looping sch80 & sdr11 for Internal Toilet)

Cost shall be inclusive of (a)Making maximum of 7.5 x 7.5 cm chase in wall and floors for the pipe, making good the same by using 1:2 cement mortar over the wire mesh and providing protection to embedded pipes and fittings (in wall chase) by wrapping two layers of 400 micron polythene sheet including proper overlaps on joints complete as required or (b) Fixing/supporting the pipes (& fittings) at wall/ceiling level supported by galvanized clamps, fastener, hangers etc, as per specification. Exposed pipes to be painted of legends with direction arrow. GI pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the fire rated walls / floors slab and sealing the sleeves with glass wool in between and fire sealant compound at either end all as per Project Manager's / Consultant requirement.

3/4" dia (20 mm)

1" dia (25 mm)

1.1/4" dia (32 mm)

1.1/2: dia (40 mm)

2" dia (50 mm)

2.1/2" dia (65 mm)

3" dia (80 mm)

4" dia (100 mm)

Providing ,fixing,laying of hot water pipe insulation with tubolit closed cell polyethylene pipe insulation sleeve of approved make of 6mm thickness concealed in toilets and Shaft.

For 20mm CPVC PIPE

For 25mm CPVC PIPE

For 32mm CPVC PIPE

For 40mm CPVC PIPE

Providing & fixing brass conceald stop cock body(as per approved specification)

20 mm dia

Providing & fixing male/ female screwed end full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated ball & teflon seat tested to a pressure 30 Kg / sqcm with (threaded joints) complete as required.

20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

Providing and fixing C.I. Butterfly valve (Body : Grey Cast Iron, shaft : SS, Disc : SG Iron (nickel plated), Liner : HT - EPDM) of approved make with flange, washer, nuts & bolts and PN 10/16 pressure rating including rubber gasket & painting complete.(Plant Room + OHT Etc)

65 mm dia

80 mm dia

100 mm dia

150 mm dia (Rate Only)

Providing & fixing screwed ended gun metal horizontal / vertical non return valve conforming to IS 778 Class II and of PN 16 pressure rating including rubber gasket, union, etc. complete as required.(Plant Room)

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

Providing & fixing dual flanged C.I. `Y' Strainer with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required.

80 mm dia

100 mm dia

150 mm dia(Rate Only)

Providing and fixing in position of approved quality high pressure rated Gun Metal Float Valve with copper ball float and brass rods of required length suitable for test pressure of not less than 15 Kg/sqcm of the following sizes:

40 mm dia

50 mm dia

Providing and fixing pressure reducing station for cold water supply comprising of 2 Nos Gun Metal ball valves on inlet & outlet & 1 no. globe valve for by-pass 1 No pressure reducing valve with flanged/ screwed connection, 1 No. `Y' strainer, 2 Nos Pressure gauge on inlet & outlet, and 1 No. 15 mm dia safety valve. The complete system is tested to a pressure not less than 15 Kg/Sq.cm and suitable to reduce the pressure upto 2 Kg/Sq.cm) Including necessary pipe & fittings; i.e. flanges/ unions, nuts, bolts and washers complete as required.

40 mm dia (CI Housing - PRV)

50 mm dia (CI Housing - PRV)

65 mm dia (CI Housing - PRV)

Providing, fixing , testing and commissioning water meter with direct reading dial in KL with all necessary fitting such as threaded pieces, unions pressure gauge, isolation cock, flanges piece for future removal, flanges / unions complete with all necessary testing charges and obtaining test certificates from municipal authorities, on following size pipe lines (1 no. strainer shall be provided at inlet & outlet and cost shall be inclusive for the same). The meter shall comply to ISO 4064 standard, feasible for class B or Class A installation.

65 mm dia (CI)

Providing & fixing on line turbine type flow meter with preamplifier & microprocessor based electronic flow meter mounted in plumbing plant room electrical control panel with the following features. Monitoring the total flow, Flow rate, high low arm batching and blending etc. Including electrical wiring from preamplifier to microprocessor based flow meter. Complete with all type of Plumbing & Electrical connections, accessories, wiring, conduits & supports complete with all respect. The signal from read out shall be 4-20 m.amps to be received on BAS.

80 mm dia

Making water supply connection to kitchen / laundry(Common area) equipment, appliances, coolers etc. including necessary fittings, (pipes and valves to be paid separately).

32 mm to 50 mm dia

Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm.

20 mm dia

Providing and fixing 600 mm dia ductile iron (heavy duty) water tank circular cover with frame (as per EN-124) with lockable arrangement complete in all regards (Total WT of cover and frame tobe not less than 85 kg).

Providing & fixing in position 25 mm dia lawn hydrants consisting of 25 mm dia Ball valve, GI nipple and quick release coupling / threaded hose receiver complete as required.

Constructing brick masonary chamber (for housing valves, Meters etc.) of brick work with bricks of class 75 with cement mortar 1:5 (1 cement:5 fine sand) plastering internal face & (with a floating coat of neat cement) cement mortar 1:3 (1 cement: 3 fine sand and rough plaster on outer face. R.C.C top slab with medium duty D.I. manhole cover and frame of 600 mm dia (weight : 60 KG). Including excavation, dewatering, refilling, watering, ramming and removing the surplus excavated material complete as required. (All sizes are clear internal sizes).

Size 600x 600 x 600 mm deep (with 600 x 600 MD; DI cover (Wt : 45 kg))

INTERNAL DRAINAGE : SOIL, WASTE , VENT AND RAIN WATER PIPES WITH FITTINGS

Providing, fixing & testing uPVC SWR pipes confirming to IS 13592 (Type B 6KG/CM2) alongwith all required fittings like tees, bends, crosses with or without access doors jointed with approved solvent cement as per manufacturer's recommendations, fixed to walls and ceilings with clamps complete including cutting and making good the floors and walls where required complete of outer diameter.

75 mm Dia

110mm Dia

160mm Dia

200 mm Dia

Providing, fixing, jointing, testing and commissioning of UPVC pipe onfirming to IS : 13592 Type A 4kg/cm2, cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door) & vent cowl. Fixing at wall / ceiling level supported by G.I. clamps, hangers etc. duly epoxy coated. (Vent Stack )

75 mm dia

Providing, fixing, jointing, testing and commissioning of UPVC pipe confirming to IS : 4985 (Pipe Class III - 6 kg / sq.cm) cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door) & vent cowl. Fixing at wall / ceiling level supported by G.I. clamps, hangers etc. duly epoxy coated.(Internal Soil Waste Vent connection)

40 mm dia

50 mm dia

Providing and fixing in position 75 mm UPVC Nahni traps/Multifloor traps Trapning design including 125 mm dia UPVC grating, joining, embedding in concrete etc. complete rate to include making of opening in floor, marble / tiles, for fixing grating.

Providing, fixing and testing of uPVC SWR P or S trap including jointing with solvent cement and making good the walls, floors etc., complete of nominal size.

Providing, fixing and testing of uPVC SWR inlet fittings / Height riser with two or three saddle inlets of 40, 50 mm size, fabricated from 110 mm outer dia uPVC pipes and fixed to uPVC traps with drip seal/m-seal/solvent cement joint complete in all respect.

Providing and fixing PVC floor drain for balcony 100 x 50mm, complete as per instructions of the Engineer in charge.

Providing and fixing Multi Floor trap 75MM Outlet /3 inlet 125mm Height , complete as per instructions of the Engineer in charge.

Providing and fixing Heavy class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement motor to match with floor finish as per architect requirement & suitable for waste and FD.

Size 150 mm x 150 mm or 125 mm dia

Providing and fixing PVC clean out plug & Fittings

For 110 mm dia pipe (Straight type/door bend )

For 150 mm dia pipe (Straight type/door bend)

Providing and fixing P.V.C. WC connector (straight or bend type) with rubber lip ring. Including 110 mm dia PVC pipe / bend of required length and proper connection.

Making drainage connection to kitchen / laundry (Common area) equipment, appliances etc. including necessary GI pipes / fittings & Flexiable pipes complete as required.

32 mm dia to 50 mm dia

Providing & fixing rain water `Khurras' size 450x450 mm required depth with lead flashing around the pipe with one piece lead sheet of 3 mm thick set on a layer of cold bitumen. Including Heavy duty CI/MS grating as per drawing complete as required.

Providing and fixing CI rain water head of required length with puddle flange to fix head in RCC slab including removable heavy duty dome type CI grating and CI hopper of approved design.

260 mm dia ; 100 mm outlet

450mm dia; 150 mm outlet

Providing and fixing square mouth cast iron gully trap complete with CI grating in brick masonry chamber of standard detail with first class bricks and water tight double seal CI cover with frame of 300 x 300 mm internal size. The weight of cover and frame to be not less than 10 Kg as per standard design.

(Note : Cost shall include excavation dewatering and watering proofing of chambers as directed at site)

450 x 450 mm chamber with 150 x 150 mm size “P” trap

Constructing Grease Trap of size as mentioned below of 1200 liquid depth in brick work of class 75 with cement mortar (1:6), inside plastering 16 mm thick with cement mortar 1:3 with floating coat ofneat cement and rough plaster on outside. Including aluminium bucket as per detail to collect the grease. RCC top slab with 2 nos. 600 x 600 mm dia medium duty, double seal manhole covers with frame (weight of covers & weight of frame 75 Kg), necessary 150 mm thick foundation concrete (1:2:4).

EXTERNAL SEWAGE / STORM WATER DRAINAGE:

Providing, fixing, jointing and testing in position the following UPVC pipes confirming to IS:4985 of 6 Kg / Sq.cm for drainage system cut to required length. Pipe to be laid below ground level in trenches upto required depth including excavation in all kind of soil (hard rock), dewatering, refilling, watering, ramming and removing the surplus excavated material and making good the same complete as required. Cost shall be inclusive of providing protection to pipe all round / haunches as per specification.

110 mm dia

160mm Dia

Providing , Fixing, testing and commissioning and laying UPVC Foamcore Class-SN-8 pipes, including testing of pipes and joints etc. complete with the necessary excavation, providing and laying PCC (1:4:8), laying, refilling, compaction, dewatering, curing, retesting and disposal of any excess earth/soil from the site. The pipes shall be of following nominal bore (NB) size: External sewage water

160 mm dia

200 mm dia

250 mm dia

300 mm dia

Laying, jointing and testing socketed and spigotted RCC pipes (NP2 class) conforming to IS:458 collars jointed with stiff mixture of cement mortar in the proporation of 1:2 (1 cement : 2 find sand) laid to correct levels below ground in trenches upto required depth including excavation in all kind of soil (hard / soft), dewatering, refilling, watering, ramming and removing the surplus excavated material and making good the same complete as required. Cost shall be inclusive of providing protection to pipe all round / haunches as per specification. External storm water

200 mm dia

250 mm dia

300 mm dia

400 mm dia

Designing and constructing brick masonry inspection chamber of the following sizes in brick work of class 75 in cement mortar 1:5 (1 cement:5 fine sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm. nominal size) embeded with frame for manhole, RCC foundation slab. 1:2:4 mix (1 cement : 2 coarse sand:4 graded stone aggregate 40 mm nominal size) both inside and outside of plastering 12 mm thick with cement motar 1:3 (1 cement : 3 coarse sand) with a floating coat of neat cement on inside face, proper water proofing to ensure no ground water seepage in the manhole, Poly propylene (conforming to ASTMD - 4101) foot rests (meeting the 224 kg load requirement as per IS 5455) at 300 mm spacing, benching and making channels with 1:2:4 cement concrete neatly finished, including necessary centering and shuttering, reinforcement, excavation, in all kind of soil, dewatering, refilling, watering, ramming and removing the surplus excavated earth, making good the same complete as required.

1. Contractor shall submit the structural design and drawings for the approval of Project Manager prior to execution.

450x 450 mm Size Depth Up to 450MM size

600 x 600 mm Size Depth Up to 900MM size

900 x 600 x Size Dpeth UP TO 900MM

1200 x 900 x 900 mm size

1400 x 900 mm (Arch type) (2500 mm deep)

1500 mm dia circular type (2300 mm deep)

Providing & fixing Ductile Iron Manhole cover with frame:

For 600 x 600 mm MH Medium Duty (B-125) Wt - 75 kg

450 x 450 mm, Medium Duty (B-125) Wt - 45 kg

For 900 x 600 mm MH

1200 x900 mm, Heavy Duty (C-250), Wt : 125 kg

1400 x 900 mm Heavy Duty (C-250), Wt : 125 kg

1500 mm Heavy Duty (C-250), Wt : 125 kg

Providing and fixing 600 mm long MS hot dip galvanized PUDDLE FLANGES fabricated out of 6 mm thick MS plates of suitable size and IS:1239 heavy class pipes properly fixed in walls & top slab of tanks. The entire fittings shall be hot dipped galvanized after fabrication. Length shall be minimum 600 mm or wall thickness plus 200 mm on either side (which ever is more).

32 mm dia (screwed ends)

40 mm dia (screwed ends)

50 mm dia (flanged ends)

65 mm dia (flanged ends)

80 mm dia (flanged ends)

100 mm dia (flanged ends)

150 mm dia (flanged ends)

200 mm dia (flanged ends)

250 mm dia (flanged ends)

Providing and fixing blank flanges, making flanged joints with bolts, nuts, washers and rubber insertion 3 mm thick, testing the flange and joints etc. complete for pipes of following diameter.

25 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Providing and fixing in position the Mild Steel (MS) ‘C’ class pipes as SLEEVES each to be embedded in RCC walls / beams.

250 mm dia

200 mm dia

150 mm dia

100 mm dia

75 mm dia

50 mm dia

Drilling or Core cutting, horizontal, vertical or inclined holes in reinforced cement concrete and / or hard rock

up to 75 mm diameter for a depth / length upto 300 mm

Diameters above 125 mm upto 200 mm for a depth / length upto 300 mm

Diameters above 200 mm upto 300 mm for a depth / length upto 300 mm

Providing, laying, jointing and testing in position the following heavy class GI pipes for under ground piping conforming to IS:1239 including all necessary fittings (conforming to IS : 1879) such as elbow, coupler & tee etc. Cost shall be inclusive of excavation, dewatering, backfilling, ramming surrounding the pipe all round with minimum 150 mm thick all round compacted silver sand and providing thrust block. (Pipe shall be provided with anti crossive protective treatment Pypkote / Coatek confirming to AWWA C 203 / IS 10221 standard complete as per specification). All work complete as per specification and satisfaction of the Project Manager.

80 mm dia

100MM Dia

150 MM Dia (Rate Only)

Description of Work / Item(s)

Amount

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr.)

Wiring of twin control light point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 2 Nos Hot Dipped Galvanized M.S Modular box of 1.2 mm thick with earth terminal,2 Nos10 A two way Modular switch, 3 pin ceiling rose / holder / 3 way connector ,Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr.)

Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

On board

S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

S&F following sizes (dia.) of ISI marked ( IS:9537 P - II ) rigid steel conduit with wall thickness according to IS Specified along with ISI marked (IS:14768 P-II 2003) accessories in recessed using saddles, clamps, fasteners, pvc bushes, check nuts, as required including cutting jhiris in the wall and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

S&F following sizes of ISI marked ( IS:14927 P - II ) virgin material UPVC trunking along with accessories like coupler, inner, outer, elbow, square box, tee, end cap etc. on surface with screws, expansion fasteners as required. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

75 mm x 75 mm

100 mm x 50 mm

150 mm x 50 mm

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

2 x 1.5 sq.mm

3x 1.5 sq.mm

4 x 1.5 sq.mm

2 x 2.5 sq.mm

2 x 2.5 sq. mm. + 1x1.5sqmm

3 x 2.5 sq.mm

4 x 2.5 sq.mm

2 x 4.0 sq.mm

3 x 4 sq. mm.

4 x 4.0 sq.mm

2 x 4.0 sq. mm. + 1 x 2.5 sq. mm.

2 x 6.0 sq.mm

1 x 10.0 sq.mm

2 x 10.0 sq.mm

4 x 10.0 sq.mm

4 x 16.0 sq.mm

Supply and laying speaker cable of IS/ISO 9001 CERTIFIED COMPANY made following size 2 core twin twisted multi stranded electrolytic grade copper conductor, overall PVC insulated and armoured cable (Blue colour) on surface/ above false ceiling including cost of GI spacers, saddles etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

Supply and laying PVC Insulated and PVC Round Sheathed Multi Core copper conductor (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

2.5 sq.mm x 8 core

P & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes/ frames including making holes for switches etc, with brass screws, washers/ zinc plated nut and bolts as required. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

3.0 mm thick

4.8 mm thick

6.4 mm thick

P & F P.V.C. sheet 2.0 mm thick of following size Including screws, cup washer as required.For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

100 mm dia.

P & F 1.2mm thick M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

P & F 1.00mm thick M.S. Recessed concealed box, round of size 150 mm dia, depth 100 mm complete as required. All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

Single pole MCB (With B/C curve tripping Characteristics)

6 A to 32 A rating

Double pole MCB(With B/C curve tripping Characteristics)

6 A to 32 A rating

40 A rating

50/63 A rating

Triple pole MCB (With B/C curve trippingCharacteristics)

40 A rating

50/63 A rating

Four pole MCB (With B/C curve tripping Characteristics)

40 A rating

50/63 A rating

80 A rating

Providing & Fixing of 240/415 V factory fitted RCBO with overload, short-circuit and earth leakage protection with ISI marked (IS12640-2)/ conforming to IEC 61009-1, breaking capacity 10 KA, provision for pad lock, min. Electrical operation 10,000 upto 63 A rating , minimum phase termination capacity of 35sq.mm. , IP 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

Two pole 30 mA sensitivity

40 A rating

63 A rating

Four pole 100/300 mA sensitivity

40 A rating

63 A rating

Providing & Fixing of 240/415 V Residual current circuit breaker (RCCB) conforming to (IS:12640-1)/ IEC 61008 -1 , rated 4 KV impulse withstand voltage truly current operated and shall operate on CBCT mechanisum, provision for pad lock, min. operation 10,000 upto 63 A rating and 5000 for 100 A rating and minimum phase termination capacity of 35 sq.mm. rigid wire , IP 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

Two pole 30 mA sensitivity

16/25 A rating

32/40 A rating

63A rating

Four pole 100/300 mA sensitivity

63 A rating

100 A rating

Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

Metal door (single phase) IK-09 and IP-43 with Metal end box

Metal door (Three phase) Per phase isolation,Vertical IK-09 and IP-43 with Metal end box

4Way(Incomer 8,Sub Incomer2+2+2)

6Way(Incomer 8,Sub Incomer2+2+2)

8Way(Incomer 8,Sub Incomer2+2+2)

12 Way(Incomer 8,Sub Incomer2+2+2)

Providing & Fixing of Recessed/surface mounting heavy duty Flexi / Row type Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted with reversible door (metal or Glazed) complete with 100 Amp. copper shorting link , neutral link, earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, ferrules detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

Metal door IK-09 & IP-43 with Metal end box

2 Row 28 Module(14 module per row)

3 Row 42 Module(14 module per row)

4 Row 56 Module(14 module per row)

P&F metal clad / Plastic industrial plug top & socket unit with pin and sleeve type contact on porcelain/ bakelite base in Recessed/surface mounting heavy duty Enclosure made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted (without MCB) including making connections, testing etc.as required.For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

20 amp, 2 pin + scrapping Earth, 1 Module

20 amp, 2 pin + scrapping Earth, 2 Module

20 amp, 3 pin + scrapping Earth, 4 Module

32 amp, 5 pin + scrapping Earth, 8 Module

63 amp, 5 pin + scrapping Earth, 8 Module

P & F of Industrial plug and socket conforming to IEC 60309-1/2 made out of self extinguishing engineering polymer / polyamide, nickel plated brass sleeve and pins, socket with shutter including making connection etc as reqd. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

IP - 67 Plug top

16 A 3 pin(2P+E)

32 A 3 pin(2P+E)

32 A 5 pin(3P+N+E)

63 A 5 pin(3P+N+E)

Providing & Fixing of Recessed/surface mounting heavy duty Vertical TPN Distribution board with Metal end box with provision of incomer suitable for 3/4 pole MCCB and SP / TP MCB as outgoing ,made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted with reversible door (for double door DB only ) complete with insulated 160 (upto 160 A Incomer) / 250 Amp. copper bus bar, neutral bars with shrouds, earth bar , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022.

Double door IP-43 & IK-09 with Provision of Incomer MCCB 100/ 125 A Rating with Metal end box

Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) with CM/L no. printed and made out of unbreakable and fire retardant vergin UV Stabilized Polycarbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating ,minimum width of switch toggle( PUSH PART ) should not less then 20mm, including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

10 A bell push

Providing & Fixing of modular type lockable feature socket duly made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

13 A flat pin international socket

Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

5 step fan regulator 2 Module 360 dgree rotating

Providing & Fixing of following modular accessories as per PWD specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

USB Charger 1 A - 1 M with BIS mark

Providing & Fixing of following size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

1/2 Module

Providing & Fixing of Wiring Accessories OEM fabricated following size GI box of 1.2 mm thick with earthing terminal and adjustable floating clamp in recess/ surface suitable for modular accessories as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

1-2 Module

Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

SITC of Draw out type 3/4 pole door interlock Air Circuit Breaker (ACB) as conforming to IS/IEC 60947 P - 2 :2003 in existing LT panel suitable for LT installation 440 V, 50 Hz and having adjustable over load short-circuit, Instantaneous , earth fault (LSIG) with separate LED indication for each type of fault shall confirm to EMI/ EMC test , LCD/LED display, last 10 trip history, provision of ZSI, Communication, Power metering module, Thermal memory , trip free mechanisum , suitable for ambient 50 degree and utilization catagary B. In built electrical & mechanical anti pumping feature , 100% rated neutral . ACB shall have separate indication for service, test, isolation & maintenance position, Breaking capacity Icu = Ics = Icw ( 1 sec ) , U imp - 12 KV, break time not more then 25 ms. Provision for electrical & mechanical interlock between ACBs, Min.electrical operation 10000 upto 2000 A rating and 5,000 for 2500 A to 4000 A. including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

Microprocessor based release Draw out type ( Motorised charging type ) 3Pole

630/800 A Rating , 50 kA

1000 A Rating , 50 kA

Microprocessor based release Draw out type ( Motorised charging type ) 4 Pole

630/800 A Rating ,50 kA

1000 A Rating , 50 kA

1250 A Rating ,50 kA

SITC of 3 /4 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage 690 V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

4 pole MCCB With Thermal Magnetic release

up to 100 Amp , 10 kA, fixed O/L & fixed S/C setting

up to 100 Amp , 25 kA, adjustable O/L & adjustable S/C setting,

125 Amp , 25 kA, adjustable O/L & adjustable S/C setting,

160 Amp , 25 kA, adjustable O/L & adjustable S/C setting,

200 Amp , 25 kA, adjustable O/L & adjustable S/C setting,

250 Amp , 25 kA, adjustable O/L & adjustable S/C setting,

250 Amp , 35 kA, adjustable O/L & adjustable S/C setting,

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, round / flat strip armouring, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure 'A' attached as per Rajasthan PWD Electrical BSR 2022

Supplying and making one end termination with Nickel plated heavy duty brass single compression gland (as per IS 12943-1990)) SIBG type consisting of Check Nut, Gland Body, Metal Washer(3 Nos.), Outer Seal Rubber Ring, Compression Nut, heavy duty aluminium lugs (as per IS 8309 -1993) duly crimped with crimping tool, PVC tape as per IS 8337-1976 of following size of PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

3.5 x 25.0 sq.mm

3.5 x 35.0 sq.mm

3.5 x 50.0 sq.mm

3.5 x 70.0 sq.mm

3.5 x 95.0 sq.mm

3.5 x 120.0 sq.mm

3.5 x 150.0 sq.mm

3.5 x 185.0 sq.mm

3.5 x 240.0 sq.mm

3.5 x 300.0 sq.mm

3.5 x 400.0 sq.mm

4 x 10.0 sq.mm

4 x 16.0 sq.mm

Supplying and making one end termination with Nickel plated heavy duty brass single compression gland (as per IS 12943-1990)) SIBG type consisting of Check Nut, Gland Body, Metal Washer(3 Nos.), Outer Seal Rubber Ring, Compression Nut, heavy duty Copper lugs (IS 8337- 1976) duly crimped with crimping tool, PVC tape for following size of PVC insulated & PVC sheathed/ XLPE copper conductor cable of 1100 volt grade as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

1 x 16.0 sq.mm

1 x 25.0 sq.mm

3 x 2.5 sq.mm

3 x 4.0 sq.mm

3 x 6.0 sq.mm

4 x 2.5 sq.mm

4 x 4.0 sq.mm

4 x 6.0 sq.mm

4 x 10.0 sq.mm

4 x 16.0 sq.mm

4 x 50.0 sq.mm

Supply, Fabricating & installing following sizes of perforated Hot dipped Galvanized iron cable tray ( Galvanized thickness not less then 50 microns) with perforation not more then 17.5% in convenient section including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with GI suspenders including GI bolts & nuts , fastners, supports etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

100mm x 50mm x 1.6mm

150mm x 50mm x 1.6mm

225mm x 50mm x 1.6mm

300mm x 50mm x 1.6mm

375mm x 50mm x 2.0mm

450mm x 50mm x 2.0mm

600mm x 50mm x 2.0mm

750mm x 75mm x 2.0mm

Supply and fixing following size of Hot dipped Galvanized (275 GSM) floor raceways / Under floor trunking with/ without partion, including common cover, joint sleeve, cross over junction Box etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

75 mm x 38 mm x 1.5 mm

100 mm x 38 mm x 1.5 mm

150 mm x 38 mm x 1.5 mm

250 mm x 38 mm x 1.5 mm

300 mm x 38 mm x 1.5 mm

Supply and fixing following Hot dipped Galvanized (275 GSM) accessories for floor raceways / Under floor trunking etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Access Outlet 200 mm x 200 mm x 40-75 mm with Galvanized Lid

Access Outlet 250 mm x 250 mm x 40-75 mm with Galvanized Lid

Access Outlet 300 mm x 300 mm x 40-75 mm with Galvanized Lid

Access Outlet 350 mm x 350 mm x 40-75 mm with Galvanized Lid

Access Outlet 450 mm x 450 mm x 40-75 mm with Galvanized Lid

Access Outlet 600 mm x 600 mm x 40-75 mm with Galvanized Lid

S/F cable route marker with 10cm x 10cm x 5mm thick or 10 cm dia. G.I.plate with inscription thereon, bolted/welded to 35mm x 35mm x 5mm angle iron, 60cm long and fixing the same in ground in C C ( 1:3:6 ) as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

P / L of Double wall corrugated HDPE pipe confirming to IS : 16205 P-24, Stiffness Class 750 N, Externally corrugated and having smooth surface inside with HDPE Coupler, Elbow, Tee at required Depth below the ground for laying cable of following Nominal Outer dia. MFR Test report from NABL accrediated is to be submitted.(Excavation of Earth & Back filling with compaction is to be Paid Extra)All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

200 mm Dia.

Providing and laying Non Pressure NP-3 class R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) etc. as required. (Excavation of Earth & Back filling with compaction is to be Paid Extra). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

250 mm dia.

300 mm dia

Providing & Laying XLPE insulated three core Armoured Aluminium cable for working voltage 11 K.V.(E) confirming IS :7098 P - 2 with H4- Grade electrolytic aluminium conductor confirming to IS: 8130 class-2 of purity >99.6 %, Insulation Screening: Extruded Semiconducting Compound followed by helically wrapped Copper Tape, round / flat strip armouring of cables , Inner / outer sheath PVC type ST-2 confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

3 core 185.0 Sq.mm

Providing & making heat shrinkable type indoor/outdoor/straight through terminations/ joint kit suitable for 11 KV / 33 KV (Earthed) cable with required components, prepration of cable ends. Type test report should be as per IS13573:2011 which covered all sequence for table 2 for termination kit and table 3 for streight through joint inclusive thermal & dynamic short circuit test, humidity test, soil fog test. Cross linking shall be done out side factory with E- beam/ peroxide technology. Extrusion process shall be in house OEM within same vicinity. including testing etc. as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

11 KV End Termination Kit Indoor type

3 core 120/150/185 Sq.mm

11 KV End Termination Kit Outdoor type

3 core 120/150/185 Sq.mm

Plate Earthing as per IS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Supply & Laying following size earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/ soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

20mm x 3mm copper strip

25mm x 3mm copper strip

25mm x 5mm copper strip

50mm x 6mm copper strip

25mm x 3mm G.I. ( Hot Dipped ) Strip

25mm x 6mm G.I. ( Hot Dipped ) Strip

32mm x6mm G.I. ( Hot Dipped ) Strip

50mm x 6mm G.I. ( Hot Dipped ) Strip

Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection with GI/Cu purity purity >95% thimble etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

8 SWG tinned copper Wire

8 SWG G.I. ( Hot Dipped ) Wire

16 Sq.mm Copper coated steel stranded conductor (Wt. 130 Kg/Km

25 Sq.mm Copper coated steel stranded conductor ( Wt. 200Kg/Km

S & F of Earth Bar with Disconnecting link Made out from 50 mm x 6 mm copper purity purity >95% /GI strip pre fitted on epoxy powder coated metal base mounted on hexagonal SMC Insulators of following Size.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annex ure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

400 mm , 6 Way Copper

600 mm , 10 Way Copper

400 mm , 6 Way GI

600 mm , 10 Way GI

Providing & Fixing of 400 mm Sweep BLDC technology Oscillating type Wall mounting / Pedestal type fans with Three speed, ON and OFF position, Double Wall bearing with front and back 120 or more ribs guard; Three no. blades, noise level should be <= 75 dB, including fixing with anchor bolts, making connection testing etc. as required. ( With Remote ) All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Wall mounting type with Service value 2.0 CMM /W, Min. Air Delivery 71 CMM

Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 )

Providing & Fixing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

300 mm sweep(900/1400 RPM)

600 mm sweep(700 / 900 RPM)

Providing & Fixing of Vertical(BEE 5 star rated) / Horizontal( BEE 3 star rated) storage water heater with outer casing made of Engineering Plastic sheet (Upto 25 Ltr) / Metal rust proof Body (35 & 50 Ltr), Glass - line / Titanium Enamel coated Pressure Pump Compatible 8 bar pressure Inner tank, Glass Line Coated , mineral filled heating element, stem type, snap action adjustable thermostat , Dual indicating lamps Injected PUF insulation, Multi Function Valve etc. as required held in position with 2/4 no. 10/12 mm anchor Fastener, duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top with Portable Residual Current Device ( PRCD ) , including making inlet, outlet Flexible alloy connection, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

1170mm(+/-10%) LED batten with min. lumen output 2200 lm

570mm (+/-10%) batten with min. lumen output 1000 lm

Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / Sqaure SMD Mid Power LED Downlight with power coated die-cast aluminum housing with UV Stabilized non yellowish Diffuser with BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% . System Lumen efficacy of ≥ 110 lm / watt, THD < 10 % , Pf.≥0.95, CRI >80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.

OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Recessed Mounting

Minimum lumen output 330 lm

Minimum lumen output 650 lm

Minimum lumen output 1300 lm

Minimum lumen output 1600 lm

Minimum lumen output 1950 lm

Minimum lumen output 2400 lm

Surface Mounting (with extruded alumn. Housing )

Minimum lumen output 650 lm

Minimum lumen output 1300 lm

Minimum lumen output 1950 lm

Minimum lumen output 2400 lm

Providing & Fixing of IP20, 2'x2' LED Surface/ Recessed mounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.

OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Recessed Mounting

Minimum lumen output 3600 lm

Minimum lumen output 4200 lm

Providing & Fixing of IP65 IK08 rated Integrated SMD Mid power LED bulk head type light fixture made from Pressure Die Cast AL housing suitable with integral driver, system lumen efficacy ≥100 lm/Watt output , THD < 10% ,p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. surge protection 4 KV. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Minimum lumen output 1000 lm

Supply and erection of Galvanized Iron pole with galvanizing done in single dipping (Average coating thickness Minimum 65 Microns) continuously tapered poles having Octagonal / Circular cross-sections designed to withstand the maximum wind speed as per IS 875, The pole shaft shall be made from sheet steel (HT Steel Conforming to grade S355JO) and confirming to BSEN 10025 and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process. pole shafts shall be provided with the rigid flange plate of suitable thickness (Fe 410 conforming to IS 226 / IS 2062) with provision for fixing 4 no. foundation bolts, This base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside.The octagonal Poles shall have lockable door of approximate 500 mm length at the elevation of 500 mm from the Base plate with bakelite sheet having 6A SP MCB and 16 sqmm stud type connector ( 4 nos) inside the pole at door opening for cable connection of following length and dimension as per table P-01 with base plate and foundation bolt on the Existing cement concrete foundation.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Poles with Octagonal Cross Section

Supply and Fixing of Pole OEM fabricated hot dipped galvanised M.S. Overhang (48.3 X 3.25 mm) with cap (400 x 88.9 / 114.3 x 3.25 mm) over the existing poles. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Single arm overhang

Supply installation testing & Commissioning of high mast lighting system (as per PLG 07 of ILP UK techinical report no 7 of ILE UK /IS:875 Part-1 – 2015//BSEN10025/and IS:2062 )consisting of totally hot dip galvanised by piecewise single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries with welded arm (excluding luminares), mast head frame assembly with full cover, including 1 No. LED 15 Watts aviation obstruction lights, double drum type self sustaining winch, integral power tool accesible from door with padlocking arrangement (winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, Stainless steel 6 mm dia. wire ropes (AISI 316, 7 / 19 costruction 3 no. rope for lantern carrage & 2 no. rope for winch assembly ) foundation bolt, torque limiter,EPR insulated PCP sheathed 5 core x 2.5 Sq.mm trailing cable, including outdoor type control panel for auto on / off, reverse / forward motor operation. The mast is constructed from mild steel plates (as per IS 5986 Gr. 510 ) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135.etc. as required on Existing Foundation. ( See table P - 03 for specs.) OEM Must have Type test certificate for wind tunnel test . All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

16.0 Mtr HM (in 2 section) suitable for 9 No. Luminaries

Providing and Laying RCC Foundation for Octagonal / Conical Street Light poles, High mast Poles as per Drawing attach at Table P-4 with Following Procedure & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

A) Excavation of Pit for Foundation Size upto required depth from Ground level

B) Dressing of Pit and Dry stone pitching 200 mm thick including supply of stones and preparing surface complete.

C) Providing and laying in position cement concrete of M-10 grade of 75 mm thickness

D) Reinforcement for R.C.C. work with TMT bars including straightening, cutting, bending, placing in position and binding all complete.

E) Centring and shuttering including strutting , propping etc. and removal of form work for Footing and Pedestal

F) Providing & Fixing of 2 no. Required Size PLB HDPE Pipe & Foundation Bolt with template as per OEM Recommendations.

G) Providing and Laying Reinforce cement Concrete of M-25 grade in Footing and Pedestal including Curing the foundation for 7 days.

H) Providing and Fixing Nosing Angle 40 mm x 40 mm x 6mm with 2 no. 100 mm long, 10 mm dia. Lugs on each face.

Pole Foundation for Octagonal pole from 3 Mtr. To 6 Mtr.

Providing & Fixing of IP-65 Protected LED aviation obstruction light luminaire comprising of die cast aluminium alloy housingwith Polycarbonate enclosure having more than 200 No's Low Power LED's having minimum power consumption 15 watts complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

aviation obstruction LED light luminaire Min. 15 Watts

Providing & Fixing of IK08 IP65 protected Top/Bottom mounted LED Post top Luminarie made of single piece construction powder coated die cast alluminium housing with UV stabalized Clear / frosted Polycarbonate diffuser and Aluminium anodised with sand blast reflector. The System level Luminous efficacy ≥ 100 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N) and efficiency > 85%, PF>0.9, THD<10% and input Voltage range of 140-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained . Driver current <750mA. Fixture must be in compliance with BIS Standards and Trade mark Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Minimum lumen output 3000 lm Post top Luminarie

Providing & Fixing of IK08 IP-66 protected high power LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each . Integrated potted driver as a unique BIS R number having efficiency more than 85 % and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy >=125 lm/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10% , driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector , Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K ±355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

High Power LED Flood Light Minimum lumen output 10000 lm

Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

LED Street Light fixture with Minimum lumen output 7500 lm

Providing & Fixing of IK10 IP65 protected 600 mm height LED Bollard Luminarie with base plate made of powder coated die cast alluminium housing with UV stabalized PC diffuser. The System level Luminous efficacy ≥ 90 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N) and efficiency > 85%, PF>0.9, THD<20% and input Voltage range of 90-270V AC at 50Hz. System life of 30000 Burning hours with 70% of Initial Lumens maintained Light output in Cool white or Warm White Colour as per engineers choice. driver current <750mA. Fixture must be in compliance with BIS Standards and Trade mark Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Minimum lumen output 980 lm Bollard

Providing and fixing of IP 65 protected Polycarbonate / Polysterene fuse box moulded with inside knock outs of following size with hinged cover, transparent window, PU gasket, locking arrangement, duly holded with 2 nos. pole clamps of 20 mm x 3 mm flat with nut and bolts, The box shall be provided with Din rail, 4 / 8 way 10.0 / 16.0 sq.mm heavy duty connector, earth terminal, complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

125 mm X 200 mm X 122 mm

Providing & Fixing of IP - 65 protected impact resistant polycarbonate / Polysterene enclosures with knock out for cable entry/out including fixing with nut, bolt, fatner etc as required complete in all respect of following sizes.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

SITC of following capacity IK10 Sandwich Type Rising Mains / Bus Duct Confirming to IEC 61439 part 1 & part 6 standard & IS 8623 P-II and Manufactured in India for use on 3 phase 4 wire , 50% internal earth , 415 volts, 50Hz A.C. supply , class F insulation, rated insulation voltage 1000V, impulse withstand voltage 12 KV, min. seismic zone 4 as per IS1892, with IP-54 / IP-66 (With Canopy) enclosure made of 1.6mm thick sheet steel duly powder coated in convenient sections complete with 4 Nos aluminium (with 6101 or 63401 grade) bus bars, necessary joints & expansion joints, fire barrier at each floor, provision of tapping at every metre, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system including making opening in RCC / Brick Masonary and repairing the same etc. as required. Type Tests reports like (i) Short Circuit Test (ii) Degree of Protection (iii) Temperature rise test of Rising main in CPRI / UL / ASTA accrediated lab will be submitted by OEM.

Routine test as per OEM's QAP in It's own Manufacturing facility in India shall be witnessed by department Engineer virtually / Physically. Complete Installation of Rising Mains shall be Vetted by Manufacturer before Comissioning. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Sandwich Type Bus Rising Main

400 amps 25 KA SC for 1 sec

630 amps 40 KA SC for 1 sec

800 amps 50 KA SC for 1 sec

Sandwich Type Bus Duct

1000 Amps 50kA SC for 1 sec

1250 Amps 65kA SC for 1 sec

1600 Amps 80kA SC for 1 sec

2000 Amps 80kA SC for 1 sec

SITC of following capacity UL/KEMA/KEUR /CPRI approved IP68 Compact cast resin Bus Duct Confirming to IEC 61439 part 6 standard , high flame resistance and circuit integrity property under IEC60331-1 , BS8602 standard, IEC 60068-3-3 / 60068-2-57, IEEE-693 complete as per attched specification in RFP

Compact cast Resin Bus Duct IP68

1600 Amps 80kA SC for 1 sec

1000 Amps 50kA SC for 1 sec

SITC of Bus Rising Main OEM manufactured following capacity End Feed Unit Confirming to ANSI C37.23 standard & IS 8623 P-II suitable for Sandwich / Compact Air Insulated type for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure duly powder coated with provision of MCCB/ACB (but without MCCB/ACB), Interlocking feature complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

For 800 Amp. (Without MCCB)

For 1000/1250 Amp. (Without ACB)

For 1600 Amp. (Without ACB)

SITC of Bus Rising Main OEM manufactured following capacity Plug in / Tap off Box suitable for Sandwich / Compact Air Insulated type bus bar trunking Confirming to ANSI C37.23 standard & IS 8623 P-II & IEC-60947-2-2000 for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure duly powder coated with provision of MCB/MCCB / ACB (but without MCB/MCCB/ACB) with Interlocking complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Plug in Box suitable for Sandwich Type Bus rising Main

100/125 amps (Suitable for MCCB) without MCCB

160/200/250 amps (Suitable for MCCB) without MCCB

400 amps (Suitable for MCCB) without MCCB

500 / 630 amps (Suitable for MCCB) without MCCB

SITC of Bus Rising Main OEM manufactured Tinned copper flexible joint with enclosure of following capacity with Transformer / DG / Panel as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

1000 Amp. Rating

SITC of HT metering cubical panel as approved By DISCOMs fabricated out of 18 SWG CRCA sheet steel in two compartment & MS angle of size 60mmX 6mm having provision for Following: (i)Provision for fixing Trivector / Import - Export Meter (To be supplied by DISCOMs) (ii)Provision for fixing of combined CT PT Set with Copper strip for Connection (To be supplied by DISCOMs), (iii)Test terminal Block, (iv) 6mm thick Bakelite sheet on all sides, (V) 3/6 corex 1.5 / 2.5 Sq.mm copper cable for interconnections, etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

SITC of Radiator Cooled and Turbo charged Silent DG Set (As per latest CPCB emission norms) having specifications as per A, B, C, D, E, F,G,H & I

A) 1500 RPM Diesel Engine conforming to BS:649/5514 of suitable BHP (up to 82.5 kVA 6 cylinder or Below required, 125 kVA & Above ratings 6 cylinder or above required ) capable of taking 10% over loading for one hour after 12 hours of continuous operation., Dry exhaust mainfold with Hospital grade silencer and catalytic convertor(isolated from main DG chamber), up to 3 M exhaust piping (with LRB insulation & Alum. cladding ) as required .

B) AC Brush less SPDP Alternator conform to BS 5000 (part 99) or IS/IEC 60034-1. . Alternator shall be self regulated with standard Alternator Protection( Over voltage , over speed & under voltage, under speed warning & shutdown).Engine & Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled

C) CPCB / ARAI approved Standard canopy with Weatherproof, powdercoated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with sidewall fabricated from 1.6 mm CRCA sheet & filled with glasswool (96Kg/m3) / Foam. as per IS8183 the doors of 28/40/50/85mm thick as perrating and fabricated from 1.6mm CRCA sheet packed with accoustic material, All doors/opening are sealed with neoprene /EPDNgaskets. The DG Set has Inbuilt / External in fuel tank to run 6 to 8 Hrs as per OEM standard, with protection and tripping of DG set against temperature of more than 50 degree centigrade.

D) Electronic / Mechanical governor, Manual & electric Start ,Batteries with battry charger, Engine instruments panel,AVM pads All controls for operation of DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Panel mounted MCCB/ACB of suitable rating, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level shall be less than 75 dB at a distance of 1 Mtrs. duly certified by authorised agency etc. complete in all respect of following capacity :

E) (i) Accoustic glass wool wall thickness should not be less then 40mm and not less then 20mm PU foam upto rating 100 KVA. (ii).Accoustic glass wool wall thickness should not be less then 65mm and not less then 50mm PU foam upto rating 250 KVA. (iii)Accoustic glass wool wall thickness should not be less then 100mm for rating above 250 KVA.

F) First filling of the fuel tank shall be done by contractor and the prevailing fuel cost at that time shall be reimbursed to the contactor by department.

G) Servicing Contract of DG Set from OEM's Authorised Service Dealer as per OEM guidelines during the DLP period shall be done by contractor including all consumables, actual charges shall be reimbursed to the contractor by End User Department.

H) Manufacturer / OEM must have its authorized service dealer in Rajasthan. Which can provide service within 6 Hours of compalint registration.

I) DG set will be offered for Inspection and Testing at Manufacturer's Works in presence of Departmental Engineers. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

J) DG set is suitable of Synchronizing

750 KVA at 0.8 pf 415V 50Hz 3-ǿ

500 KVA at 0.8 pf 415V 50Hz 3-ǿ

250 KVA at 0.8 pf 415V 50Hz 3-ǿ

Providing, Fixing, Jointing, Testing & Commissioning of Medium duty MS B class pipes conforming to IS 3589 / 1239 part-I for DG Exhaust applications (beyond 1.5 Mtr. length) including cutting, welding etc & fittings like elbows,flanges, tapers, reducer, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps, hanger and nuts bolts . including the cost of thermal insulation with 50 mm thick layers of LRB rock wool as per IS : 8183-1993 (64 kg/m3 density) & 26 SWG aluminium sheet claddings etc complete as required complete in all respect. (Cost of Steel Structure for Exhaust pipe will be paid Extra). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

150 mm dia

250 mm Dia.

Supply, installation and testing of metal flexible coupling (bellow) of following dia required for horizontal length more than 3 mtr.as per standard of guide line of D.G. set company complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

250 mm Dia.

Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

NON BSR ITEM

P & F of Early streamer Emission type lightning arrester on GI mast with air terminal configured as spheroid which is comprised of separate electrically isolated 4 panels surrounding an earthed central finial, the terminal shall be tested by CPRI for impulse current of 45 kA ( 8 / 20 Sec ) with 5 positive & 5 negative impulse, the arrester having following protection radius at level 1 Device shall comply NFC 17-102 and UNE 21186 standards. The device shall be mounted at least 4-5 meters high clear to highest point on the roof top with proper mounting arrangement. ESE for radius 50 mtr for level 1 protection

ESE for radius 50-68 mtr for level 1 protection

Single core 70 Sqmm Copper Armd. Cable downcondctor

P & F Lightning counter - To count no of lightning strike & it can record the date and time of the lightning incident also tested as per IEC 62561-6. the test report accredited by third party accreditation body like VDE/ILAC/ DAkkS/ UL/ NABL is to be submitted.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annex ure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Supplying and erecting danger notice board for medium voltage installation to be erected as per I.S. The board should be 150 x 150 mm.

Supplying and erecting danger notice board for high voltage installation to be erected as per I.S.

Supplying and erecting printed instruction chart both in English & REGIONAL LANGUAGE & duly framed out on glass for treatment of person suffering from Electric shock.

Supplying pair of rubber hand gloves suitable for working on 11 KV/22 KV supply.

Supplying and fixing Standard First aid box with all the Standard contents.

SITC OF WATER Proof Boxes fro out door lighting IP-68

Cable junction boxex IP67 1.5 MM2-4sqmm ,CU-3 wth terminal cable entry knockouts

Cable junction boxex IP67 2.5 MM2-6sqmm ,CU-3 wth terminal cable entry knockouts

Cable junction boxex IP67 4.0 MM2-10sqmm ,CU-3 wth terminal cable entry knockouts

Supplying,installation,testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required

Supply , Installation , Testing and commissioning of floor box/ pop up boxes according to EN60670-1/EN 60670-23 for installation either as joint box / or 5/15 amp switch / Socket/ cat6/ cat6A IO points as per direction of engineer incharge.( Make: Legrand or equivalent)

10 modules floor pop up box

16 Module Floor pop up Box

SITC of wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as per attached SLD and GA drawing as per detailed specifications given in Volume II of RFP and as per TTA & PTA specification for electrical Works, made out of CRCA sheet . Other parameters required as per point (a) ,(b), (c)below:-

(a)Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors with / without detachable extension type structure

(b)panel shall be duly treated for derusting in 7 tank process with dephosphating and with powder coating of minimum 70 microns on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness ,required hardware, separate detachable gland plate M.S. base channel (min75mm) , hinged door with locking arrangement for equipment/switchgear

[c) Interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 125 amp ) and by solid bus bar (>125 amp ) . All joints / interconnections of copper bus bar shall be dully tinned . Clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves . Earth and Neutral bus bar shall be half of the size of phase bus bar.

MAIN I/C PANEL @ SUBSTATION PANEL ROOM TTA PANEL AS PAR IEC-61439

200kVAR APFC PANEL ADMIN BLOCK TTA PANEL AS PAR IEC-61439

375kVAR APFC PANEL FOR AC VRV ODU PANEL TTA PANEL AS PAR IEC-61439

ADMIN/ACADMIC BLOCK END FEED UNIT@BASEMENT MAIN PANEL ROOM TTA PANEL AS PAR IEC-61439

UPS I/C PANEL @ SUBSTATION PANEL ROOM TTA PANEL AS PAR IEC-61439

ADMIN/ACADMIC BLOCK UPS O/G PANEL WITH END FEED UNIT@BASEMENT MAIN PANEL ROOM TTA PANEL AS PAR IEC-61439

HVAC I/C PANEL @ TERRACE TTA PANEL AS PAR IEC-61439

MAIN HAVC VRV ODU PANEL-1 TTA PANEL AS PAR IEC-61439

MAIN HAVC VRV ODU PANEL-2 TTA PANEL AS PAR IEC-61439

BASEMENT FLOOR-1 PANEL-1 &2COMMON AREA FLOOR PANEL ROOM TTA PANEL AS PAR IEC-61439

BASEMENT FLOOR-1 PANEL-1 COMMON AREA FLOOR FLOOR UPS PANEL ROOM- TTA PANEL AS PAR IEC-61439

BASEMENT FLOOR-1 PANEL-2 COMMON AREA FLOOR FLOOR UPS PANEL ROOM- TTA PANEL AS PAR IEC-61439

TYPICAL FLOOR TOWER-1COMMON AREA FLOOR PANEL ROOM TOTAL-4 NOS TTA PANEL AS PAR IEC-61439

TYPICAL FLOOR TOWER-2 COMMON AREA FLOOR PANEL ROOM TOTAL-4 NOS TTA PANEL AS PAR IEC-61439

TYPICAL FLOOR TOWER-1+TERRACE COMMON AREA UPS FLOOR PANEL ROOM TOTAL-9 NOS TTA PANEL AS PAR IEC-61439

TERRACE FLOOR TOWER-1 COMMON AREA FLOOR PANEL ROOM TOTAL-1 NOS TTA PANEL AS PAR IEC-61439

TERRACE FLOOR TOWER-2 COMMON AREA FLOOR PANEL ROOM TOTAL-1 NOS TTA PANEL AS PAR IEC-61439

AUDITORIUM POWER PANEL FLOOR PANEL ROOM TTA PANEL AS PAR IEC-61439

AUDITORIUM POWER PANEL FLOOR PANEL ROOM TTA PANEL AS PAR IEC-61439

PLUMBING PANEL IN PUMP ROOM TTA PANEL AS PAR IEC-61439

PARKING AREA PANEL AT SUB STATION TTA PANEL AS PAR IEC-61439

TYPICAL DRAWING FEEDER PANEL TOTAL 3 NOS FEEDER PILLAR (FOR EXTERNAL LIGHT ROAD LIGHT AND AREA LIGHT)

Description of Work / Item(s)

Amount

Supply Installation testing and commissioning of HT VCB Panel 11KV 1250A 26.3KA having 1 Incomer VCB and 2 Outgoings VCB as per attached Specification

SITC of 11kV 630 Amps 21KA for 3 Sec. SF6 insulated, outdoor duty (IP54) , Extensible / Non extensible type Ring main unit (RMU) manually operated in combination of VCB modules and Load Break switch consisting of Copper busbar in SF6 insulated 304 (Non-Ferrite Non-Magnetic Grade) stainless steel enclosure of thickness 2.5mm with manometer. The HV switchgear and control gear should be confirming to IEC-62271-100, IEC-62271-200-2003 & IEC-60694-1996. The RMU should be internal arc tested for 21KA for 1Second with IAC-AFL classification for gas tank. Vacum Interrupter of VCB should be RMU Manufacturer’s own make. Each feeder of RMU should have voltage presence indicator. . and compring of followings:- 1 no. microprocessor based Self powered numerical relay with over Current/ earth fault & short circuit protection with each VCB feeder. - 3 Nos. Protection CT shall be of Burden 2.5VA, ratio 50/1A, Class of Accuracy class 5P10 for O/C and E/F protection for each VCB.- 1 No. Manometer for each tank,- 1 nos. Fault Passage indicator,-Right angle boots for all the feeder Modules All the type test certificates as per IEC from Third party NABL / CPRI / ERDA accrediated lab to be submitted. (Cost of RCC Foundation / Steel Structure to be paid Extra) All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD BSR 2022

Extensible 3 way RMU with 1 no. VCB & 2 No. Load Break Switch

SITC of Cast Resin Dry type 11 KV/0.440 KV dry type transformer Dyn11 for indoor application as per attached specifications.

Description of Work / Item(s)

Amount

SITC of Solar Grid Tied Power Plant Mono crystalline Based of following KW AC output complete in all espect including structure , solar panels , grid tied inverter , connecting AC and DC cables , AC and DC protection ,DC and AC Interconnectiong cables ,DC and AC Distribution Box , Solar meter , MCCB for protection , Pressure pupms with CPVC pipes for cleaning as per Technical specifications and makes enclosed in RFP .

500 kw ( Terrace ) ( 100 KW 4 NOS+ 50 KW 2 NOS)

Description of Work / Item(s)

Amount

Supply Installation testing and commissioning of of EN/IEC62040-1, EN/IEC 62040-2, EN/IEC 62040-3, CE/UE APPROVED STANDARD , Online UPS with 30 mins Battery Backup with Digital Signal Technology with inbuilt/Separate Isolation Transformer , 3 level IGBT ,DSP Controlled Based design as per attachted specifictations Complete as required as per specification enlosed of following capacity as per follwoing specification .

Supply and Installation of 60KVA (3/3) Online UPS with 30 mins Battery Bank with MS Rack and Batteries Interlinks

Description of Work / Item(s)

Amount

Supplying, Installation, Testing & Commissioning of Electrical Driven fire fighting duty pump as per TAC and IS 12469-1988., Factory assembled in Pump make OEM for Sprinkler / Hydrant applications suitable for automatic operation and consisting of following details given as A, B, C, D, E, F, G and H.

(A) End Suction / Horizontal Axially split casing volute type Single Centrifugal pump complete for delivery of below mentioned discharge and Head

(B) Material of construction : Pump Casing - Cast Iron, Impellor - Bronze, Shaft - SS 410, Packing - Mechanical Seal

(C)Pump shall be capable of furnishing not less than 150 % of rated capacity at a head not less than 65 % of the rated head. The shut off head shall not exceed 120 % of rated head

(D) Squirrel cage induction motor (IE-3 Class) suitable for 3 phase, 415 V, 50 HZ, Ac supply , Class -F Insulation, Synchronous speed 2900 / 1500 RPM, T.E.F.C confirming to IP:55 , of required HP suitable for the above pump ,along with flexible (Love Joy type) coupling , coupling guard complete in all respect .

( E) Common bed plate fabricated from mild steel channel for installation of pump and Motor including anti vibration pads.

(F) The Hydrostatic tests (2 times of design operating head or 1.5 times the shut off head whichever is higher) and performance tests (to determine developed head, Pump BHP and efficiency v/s Flow) of pumps along with trip test shall be carried out at manufacturer’s works in Physical presence of Department’s representatives.

(G) Physical & Chemical Test reports of i) Pump casing (ii) Impeller (iii) Shaft (iv) Shaft sleeve and Dynamic Balance certificate is to be submitted by OEM

(H)Suitable size Reinforced cement concrete (M-30) foundation with foundation bolt, Nozing Angle of size 40mm x40mm x5 mm ( Cost of RCC Foundation to be paid Extra ). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

2850 LPM suitable for 70 Mtr Head Horizontal Axially split casing volute type Two stage, 1500 RPM

Supplying, Installation, Testing & Commissioning of Diesel Engine Driven fire fighting duty pump as per TAC and IS 12469-1988., Factory assembled in Pump make OEM for Sprinkler / Hydrant applications suitable for automatic operation and consisting of following details given as A, B, C, D, E, F, G and H.

(A) End Suction / Horizontal Axially split casing volute type Single / Multi stage Centrifugal pump complete for delivery of below mentioned discharge and Head

(B) Material of construction : Pump Casing - Cast Iron, Impellor - Bronze, Shaft - SS 410, Packing - Mechanical Seal

(C)Pump shall be capable of furnishing not less than 150 % of rated capacity at a head not less than 65 % of the rated head. The shut off head shall not exceed 120 % of rated head

(D) Heat Exchanger cooled Diesel Engine as per NFPA 20 developing suitable BHP for the below mentioned discharge at 1500 / 1800 RPM, flexible coupling and coupling guard with the Pump, common bed plate for mounting of the Engine and Pump,Antivibration damping arrangement by cushy foot, Diesel Engine starting Panel for starting of the engine automatically if the Normal electrical supply fails with a unit of battery bank of 12/24v,180 Ah, Lead Acid Battery with Boost / Trickle charger as required for operation of Diesel engine, Exhaust Pipe of suitable diameter upto 10 M length (with LRB insulation & Alum. Cladding), with muffler, Diesel tank of 300 Lts capacity (made out from 2 mm thick MS sheet with filling Cap) with drain cock, Diesel level Indicator, Suitable MS angle iron stand for placing tank, first Filling of Diesel tank.

(F) The Hydrostatic tests (2 times of design operating head or 1.5 times the shut off head whichever is higher) and performance tests (to determine developed head, Pump BHP and efficiency v/s Flow) of pumps along with trip test shall be carried out at manufacturer’s works in Physical presence of Department’s representatives.

(G) Physical & Chemical Test reports of i) Pump casing (ii) Impeller (iii) Shaft (iv) Shaft sleeve and Dynamic Balance certificate is to be submitted by OEM

(H) Pump to be placed on Suitable size Existing Reinforced cement concrete (M-30) foundation with foundation bolt, Nozing Angle of size 40mm x40mm x5 mm ( Cost of RCC Foundation to be paid Extra ). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

2850 LPM suitable for 70 Mtr Head Horizontal Axially split casing volute type Two stage, 1500 RPM

Supplying, Installation, Testing & Commissioning of Electrical Driven fire fighting duty Jockey pump as per TAC and IS 12469-1988., Factory assembled in Pump make OEM suitable for automatic operation and consisting of following details given as A, B, C, D, E,F and G

(A) Horizontal End suction Single Stage Centrifugal Back pull type pump complete for delivery of below mentioned discharge and Head

(B) Material of construction : Pump Casing - Cast Iron, Impellor - Bronze, Shaft - SS 410, Packing - Mechanical Seal

(C) Squirrel cage induction motor (IE-3 Class) suitable for 3 phase, 415 V, 50 HZ, Ac supply , Class -F Insulation, Synchronous speed not Exceeding 2900 RPM, T.E.F.C confirming to IP:55 , of required HP suitable for the above pump ,along with flexible (Love Joy type) coupling , coupling guard complete in all respect .

(D) Common bed plate fabricated from mild steel channel for installation of pump and Motor including anti vibration pads.

(E) The Hydrostatic tests (2 times of design operating head or 1.5 times the shut off head whichever is higher) and performance tests (to determine developed head, Pump BHP and efficiency v/s Flow) of pumps along with trip test shall be carried out at manufacturer’s works in Virtual / Physical presence of Department’s representatives.

(F) Physical & Chemical Test reports of i) Pump casing (ii) Impeller (iii) Shaft (iv) Shaft sleeve and Dynamic Balance certificate is to be submitted by OEM

(G)Suitable size Reinforced cement concrete (M-30) foundation with foundation bolt, Nozing Angle of size 40mm x40mm x5 mm ( Cost of RCC Foundation to be paid Extra ) All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

180 LPM suitable for 88 Mtr Multi Stage

Supplying, Installation, Testing & Commissioning of Electrical Driven fire fighting duty Terrace pump as per TAC and IS 12469-1988., Factory assembled in Pump make OEM suitable for automatic operation and consisting of following details given as A, B, C, D, E, F, G and H.

(A) Horizontal End suction Centrifugal Back pull type pump complete for delivery of below mentioned discharge and Head

(B) Material of construction : Pump Casing - Cast Iron, Impellor - Bronze, Shaft - SS 410, Packing - Mechanical Seal

(C) Squirrel cage induction motor (IE-3 Class) suitable for 3 phase, 415 V, 50 HZ, Ac supply , Class -F Insulation, Synchronous speed not Exceeding 3000 RPM, T.E.F.C confirming to IP:55 , of required HP suitable for the above pump ,along with flexible (Love Joy type) coupling , coupling guard complete in all respect .

(D) Common bed plate fabricated from mild steel channel for installation of pump and Motor including anti vibration pads.

(E) The Hydrostatic tests (2 times of design operating head or 1.5 times the shut off head whichever is higher) and performance tests (to determine developed head, Pump BHP and efficiency v/s Flow) of pumps along with trip test shall be carried out at manufacturer’s works in Virtual / Physical presence of Department’s representatives.

(F) Physical & Chemical Test reports of i) Pump casing (ii) Impeller (iii) Shaft (iv) Shaft sleeve and Dynamic Balance certificate is to be submitted by OEM

(G) Suitable size Reinforced cement concreat (M-30) foundation with foundation bolt, Nozing Angle of size 40mm x40mm x5 mm ( Cost of RCC Foundation to be paid Extra )

(H) Weather proof hood fabricated from 5mm thick UV stablised FRP sheet supported by 50 mm x 50 mm x 5 mm Angle Iron fram above pumpset to protect it from weather All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

900 LPM with 35 mtr head

Supplying, Installation, Testing & Commissioning submersible type dewatering pump of stainless steel casing and Noryl impellor of discharge and head given below complete with all accessories suitable for operation on 230 V, single phase/415 V /3 phase, 50 Hz. AC supply complete with starter for automatic operation including water level sensing device / float switch inter connection with submersible cable etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

180 LPM with 10 mtr head

SITC of pressure switches of pressure range 3 to 15 Bar for Main, Jockey, Terrace pump and Diesel pumps, Etc. as Required ( Control Cable from Pressure switch to Panel to be Paid Extra ). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Providing and fixing 20/25 mm dia. (PN - 1.6, Type-S1, Flanged, ISI marked) air release valve confirming to IS - 14845 : 2000 with Double Flange isolating valve (pressure rating PN 1.6) complete with 1 no. Matching Flanges (Minimum 10 mm thick), nuts, bolts, washers, gaskets etc as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

SITC of UL listed and FM Approved Polyethelene vane type water flow switch with actuation & delay mechanism for sensitivity in the range of 4 to 10 GPM and suitable for installation in following sizes of Sprinkler pipe for a Static pressure rating up to 250 PSI in cluding making connections, making hole in pipe for inserting the vane etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

80 mm Dia.

100 mm Dia.

SITC of suitable Pressure release valve of 50 mm dia, of CI body, with pressure setting range 7-15 kg/sqcm, on discharge header / Air Vessel, complete in all respect etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Providing & fixing pressure transducer in M.S. Pipe line (pressure range 0 to 10 kg/cm2) suitable for 12 volts/24 volt DC. Including connection etc. as required. ( Control Cable from Pressure Transducer to Panel to be Paid Extra ). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

SITC of UL listed / FM Approved Brass Test and drain valve assembly for sprinkler system comprising of 3-position ( off, test and Drain ) ball valves with drain orifice having K-factor 5.6 and maximum working pressure 300 PSI and Inbuilt sight glass etc. as required of following size. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

25 mm Dia.

50 mm Dia.

Providing, Fixing, Jointing, Testing & Commissioning of Heavy duty MS 'C ' class (Heavy) pipes conforming to IS 3589 / 1239 part-I for hydrant and sprinkler applications including cutting, screwing, welding etc. & forged steel fittings like elbows, tees, tapers, reducer, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps, hanger and nuts bolts including cutting hole and chase in brick or RCC walls/ slab and making good the same. complete with painting of one coats of Red Oxide and two or more coats of synthetic enamel paint of required shade complete as required. (Pipe to be tested @ 10Kgf/Sqcm for 2 Hrs.). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

200 mm dia, 6.0 mm thick

250 mm dia, 6.35 mm thick

300 mm dia., 7.0 mm thick

Providing, Fixing, Jointing, Testing & Commissioning of Heavy duty MS 'C' class (Heavy) pipe conforming to IS 3589 / 1239 part-I for hydrant and sprinkler applications in Existing trench with cement concrete block as supports including cutting, welding etc & forged steel fittings like elbows, tees, tapers, reducer with cleaning,wrapping and coating of the pipe with 4 mm thick tar based polymaric corrosion protection tape including applying uniform coat of cold pipekot primer as per IS; 10221 for protection against corrosion complete in all respect. ( Pipe to be tested @ 10Kgf/Sqcm for 2 Hrs. & Excavation of Trench and refilling of trench to be paid extra). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

80 mm dia

100 mm dia

150 mm dia

200 mm dia, 6.0 mm thick (Rate Only)

Supplying and fixing cylindrical air vessel of continuous welded construction for pump room made of 450 mm dia,fabricated out of 10 mm thick dished ends and 8 mm thick MS sheet, 2000 mm in height with flanged connection, Provision for 25 mm dia drain valve,air release valve,safety valve pressure gauge as required accessories and painting with two coats of Red Oxide and two coat of post office red enamel paint including The tank shall be installed on suitable vertical legs. The legs shall be provided with M.S. Angle of size 75 mm x 75 mm x 5 mm at the bottom. The legs shall be grouted in cement concrete foundation. as required. ( Air Release valve, Drain valve, PRV, Pressure Gauge shall be Paid Extra ). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Supplying and fixing cylindrical air vessel of continuous welded construction fixed at riser top made of 250 mm dia, fabricated out of 8 mm thick MS sheet, 1200 mm in height with flanged connection, Provision for 25 mm dia drain valve,air release valve,safety valve pressure gauge as required accessories and painting with two coats of Red Oxide and two coat of post office red enamel paint including The tank shall be installed on suitable vertical legs. The legs shall be provided with M.S. Angle of size 75 mm x 75 mm x 5 mm at the bottom. The legs shall be grouted in cement concrete foundation. as required. ( Air Release valve, Drain valve, PRV, Pressure Gauge shall be Paid Extra ). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Supplying and Fixing of PN 16 Flanged Y strainer fabricated out of cast iron body, SS 304 strainer with perforated screen with 3 mm. dia holes in existing MS / GI pipe complete with 2 no. Matching Flanges (Minimum 16 mm thick), nuts, bolts, washers, gaskets etc as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

200 mm dia

250 mm dia

Supplying and Fixing of PN 16 Flanged Sluice valve with non rising spindle, bronze /gun metal seat confirming to IS:14846 complete with 2 no. Matching Flanges (Minimum 16 mm thick), nuts, bolts, washers, gaskets, etc as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

200 mm dia

250 mm dia

Providing and constructing masonry chamber 90 x 90 x 100 cms inside with brick work in cement mortar 1:5 (1cement : 5fine sand) for water meter ,M.S. cover (6mmthick sheet with locking arrangement, 600 x600 with M.S. frame etc. all epoxy coated and R.C.C. top slab 1:2:4 mix(1 Cement : 2 coarsesand : 4 graded stone aggregate 20mm nominalsize) including necessary excavation, back fillingfoundation concrete 1:5:10 mix (1 cement : 5 fine sand and 10 graded stone aggregate 20mmnominal size) leaving a pocket of 30x30 cmwith out concrete and filled with pebbles andinside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finishedwith a floating coat of neat cement and outside plaster finished rough complete. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Supplying and Fixing of PN 16 Cast Iron Dual Plate Wafer Type Check Valve / Non return valve with SS / Bronze flap complete with 2 no. Matching Flanges (Minimum 16 mm thick), nuts, bolts, washers, gaskets, etc as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

65 mm dia(Rate Only)

80 mm dia

100 mm dia

150 mm dia

Supplying and Fixing of PN 1.6 Butterfly Valve (Wafer Type) with S.G Iron Disc and confirming to IS:13095 complete with 2 no. Matching Flanges (Minimum 16 mm thick), nuts, bolts, washers, gaskets, etc as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Supplying and Fixing of PN 16 Brass/GM Ball valves with screwed end, SS Ball including teflon tape etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

20 mm dia.

25 mm dia.

32 mm dia

40 mm dia

50 mm dia

SITC of installation control valve of cast iron body and brass/bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continous alarm when the wet riser/Sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, with 2 no. Matching Flanges (Minimum 16 mm thick), nuts, bolts, washers, gaskets, etc as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Supplying and fixing of SS 304 Single / Double headed oblique pattern hydrant landing valve (internal/external) with 75 / 100 mm dia flanged inlet & 63 mm dia instantaneous type female outlet coupling with cast iron wheel complete with ABS cap and chain and all accessories as per IS:5290-93 (Type-A) in cluding matching flange (14 mm thick), nuts, bolts, washers, gaskets, etc as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Single Headed with 75 mm Dia. Flanged Inlet

Double Headed with 100 mm Dia. Flanged Inlet

Supplying and fixing orifice plate made of 6 mm thick stainless steel with orifice of required size in between flange & landing valve of external and internal hydrant to reduce pressure to working pressure of 3.5 kg/cm2 complete with rubber gasket, GI bolts, nuts, washers etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Supplying and fixing of flexible hose made with 100% polyester, black EPDM internal rubber lining with External coat of synthetic elastomer (IS:636, type-A) 63 mm dia, 15 mtr. Long RRL hose pipe with instanteneous type 63 mm dia SS-304 male and female couplings (IS:903) duly bound and riveted to hose pipes with copper rivets and SS wire etc. as required.Appropriate Test Certificate/ report with liable warranty of product/accessories from OEM shall be submitted.

Supplying & fixing SS-304 Short Branch Pipe conforming to IS: 903:93 fitted with 20mm (nominal internal diameter) bore nozzle, for projecting water in form of solid jet. The Branch shall have 63mm Male Instantaneous Inlet, suitable for use with 63 mm size Fire fighting hoses. H.P. tested to 21 kgf/cm² for 2.5 minutes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Supplying and fixing first -Aid Fire hose reel Drum wall mounted swinging type with MS construction powder painted in post office Red, conforming to IS 884-1985 with upto date amendments, complete with the following as required. (A) Thermoplastic / Rubber Hose (B)20 mm dia UL, FM Bronze / SS nozzle with 5mm orifice (C)Drum and brackets for fixing the equipments on wall. (D) Connections from riser with 20/25 mm dia Brass/GM gate valves with screwed end and conforming to IS:778 Class-1 through Forged steel Screwed Union & M.S. pipe. Etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

With 30 m x 20 mm High Pressure Braided Rubber Hose as per IS:5132 - 1969 and Bursting pressure 42 Kg/sqcm

Supplying and fixing Inlet Breeching Connection of CI body with Gun Metal male instantaneous inlet couplings with Inbuilt NRV, Drainage Connection with 50 mm Brass gate valve complete with PVC blank cap and chain as required for 150mm dia Outlet with 1 no. Matching Flange (Minimum 16 mm thick), nuts, bolts, washers, gaskets, etc as required of following Ways. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Providing and fixing of 100 mm Dia. Flanged Gun Metal Fire brigade Suction hose coupling (draw out connection) for female coupling as per IS:902-1974 complete with Matching Flange (Minimum 14 mm thick), nuts, bolts, washers, gaskets, etc as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Supply and Fixing of Cast iron body one side Flanged and other side strainer ball type foot valve with Reinforced rubber Nitrile rubber coated Ball including Matching Flange (Minimum 16 mm thick), nuts, bolts, washers, gaskets, etc as required of following Sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

150 mm Dia.

Providing and Fixing of PN16 Resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 8.5 Kg/cm2 and test pressure 14 Kg/cm2 to provide relief from stresses at pipe including Matching Flange (Minimum 16 mm thick), nuts, bolts, washers, gaskets, etc as required of following Sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

150 mm Dia. x 150 mm Oal

Supplying and fixing of 750 mm x 600 mm x 250 mm Outdoor application Fire Hose Cabinet made of 1.6 mm thick MS sheet Duly powder coated in red color externally and white internally with 6 mm thick glazed doors with Expanded Metal 2 mm thick Jali including necessary locking arrangement suitable to accommodate 2 Nos 15 Mtr. Long RRL Hose and 1 No. branch pipe on Existing Wall / Angle Iron Frame as required. (Cost of MS structure for mounting Frame is to be Paid Extra) All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Providing and fixing of Fire / Electrical Shaft Door made from powder coated (50 Micron) aluminium partialy glazed with 6 mm thick glass and Partialy / Fully Louvered with Outer frame of Aluminium Section of Size 100 mm x 45 mm x 1.5 mm and Shutter's Top, Middle & side Section of Size 82 mm x 45 mm x 1.5 mm, Bottom Section of Size 110 mm x 45 mm x 1.5 mm Complete with Hinges, Tower bolt, Handle, Aldrop, Locking Arrangement including dash fasteners of required dia and size, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. as per drawings and the directions of Engineer-in-charge. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Providing and Fixing of 15 mm dia Bronze quartzoid bulb type sprinkler heads with Maximum working pressure 11.6 Kg / Sqcm and suitable for 68 degree centigrade rating standard response (UL Listed) chrome plated complete in all respect of the following type. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Pendant/ Upright type

Sidewall Sprinklers (ordinary) (Rate Only)

Extended Throw Sidewall type .

Concealed type with Tin alloy fusible metal plate for temperature 57 degree Centigrade

Providing & fixing of UL listed 1.5 mm thick chrome plated Dual type MS Escutcheon plates fixed at junction of Sprinkler piping with the false ceiling. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Supply & Fixing of Fire Man's Axe with carbon steel head & rubber moulde handel usable upto 20 KV and confirming to IS :926 with length approx 0.4 M & weight 3.0 Kg. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Providing & fixing sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

700 mm Long

1000 mm Long

1200 mm Long

1500 mm Long

Providing & fixing Stainless Steel pressure gauge with dial of 150 mm dia size and range 0 to 20 kg/sq.cm with 3 / 8 " BSP bottom entry , Ball valve , SS Syphon tube all fittings etc, duly calibrated before installation in MKS and FPS units, Accuracy Level +/- 1% including Making Drilling in Existing MS Pipe Etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Supplying and drawing Fire Resistant flexible / stranded bare copper conductor, PVC / XLPE insulated, overall aluminium mylar tape shielded ATC drain wire and outer PVC sheathed industrial Instrumentation (shielded)cables voltage grade 300/500 V as per BS /EN 50288-7 in existing surface or recessed PVC/ MS conduit/casing capping / Cable tray / Open Duct making connections, testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for cables. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

2 x 1.5 Sq.mm Armoured With Outer Sheath in Red Color

2 x 2.5 Sq.mm Armoured With Outer Sheath in Red Color

Supply & Fixing of Water + AFFF 6% Mechanical Foam type Fire Extinguisher (Stored Pressure type) conforming to IS:15683:2018 , Powder coated Internal & External Surface Deep drawn cylinder body of Mild Steel CR2 grade conforming to IS: 513, Squeeze grip Forged brass release valve with Inbuilt safety release device, Diaphragm Type, 0 to 25 bar range pressure gauge, 450 mm long EPDM discharge tube, QR code for Product Traceability including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificate from OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Capacity - 6 Ltrs.

Capacity - 9 Ltrs.

Supply & Fixing of CO2 type Fire Extinguisher conforming to IS:15683:2018, charged with CO2 gas (purity 99.7% conforming to IS 15222), Powder coated Internal & External Surface Manganese steel ISI marked as per IS 7285 cylinder body , Wheel type Forged brass release valve ISI Marked as per IS 3224 with Inbuilt safety release device ((Fusible plug and Rupture Disc Type), 1.0 Mtr. Metal wire braided hose having minimum bursting pressure of 140 Kgf/cm2, Horn with metallic thread connection, QR code for Product Traceability, including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificate from OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Capacity 3.0 Kg.

Capacity 4.5 Kg.

Supply & Fixing of Dry Powder Agent (as per IS 4308:2019), ABC type Fire Extinguisher (Stored Pressure type) conforming to IS:15683:2018 , Powder coated Internal & External Surface Deep drawn cylinder body of Mild Steel CR2 grade conforming to IS: 513, Squeeze grip Forged brass release valve with Inbuilt safety release device, Diaphragm Type, 0 to 28 bar range pressure gauge, 450 mm long EPDM discharge tube, QR code for Product Traceability including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificate from OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Supply & Fixing of Trolley mounted 22.5 Kg CO2 type Fire Extinguisher conforming to IS: 16018:2012, charged with CO2 gas (purity 99.7% conforming to IS 15222), Powder coated Internal & External Surface Manganese steel ISI marked as per IS 7285 cylinder body , Wheel type Forged brass release valve ISI Marked as per IS 3224 with Inbuilt safety release device ((Fusible plug and Rupture Disc Type), 1.5 Mtr. long Metal wire braided hose having minimum bursting pressure of 140 Kgf/cm2, Horn with metallic thread connection, QR code for Product Traceability, including Double mounted handle as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificate from OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Supply & Fixing of Ceiling mounted Dry Powder Agent (as per IS 4308:2019), Modular stored pressure type ABC Fire Extinguisher , Powder coated Internal & External Surface Deep drawn cylinder body of Mild Steel CR2 grade conforming to IS: 513, Fixed Bulb with Temerature 68 deg C, QR code for Product Traceability including Fixing on Ceiling with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificate from OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

5 Kg Capacity

10 Kg Capacity

Supply & Fixing of Ceiling mounted UL listed clean Agent (HFC-236fa), Modular type Fire Extinguisher , Powder coated Internal & External Surface Deep drawn cylinder body of Mild Steel CR2 grade conforming to IS: 513, Fixed Bulb with Temerature 68 deg C, QR code for Product Traceability including Fixing on Ceiling with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificate from OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

5 Kg Capacity

10 Kg Capacity

Supplying and Fixing of Galvanized Mild Steel fire bucket Confirming to IS: 2546 : 1974 with one coat of primer and two coat of enamel paint of approved shade on Angle Iron ( 50 x 50 x 5 mm) Stand of Size 800 x 1240 x 400 mm with MS 22 SWG Galvanized Canopy, 4 Hooks for Buckets including associated civil works etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Providing and fixing signages as per required content printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating with suitable colour combination (Glow in dark) with high intensity properties for indoor surface glow visibility not less than 6 hrs. in total darkness and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Single sided signage board

Double sided signage board

Providing and fixing of Aluminium housing body self contained Rechargeable LED Emergency Light with required content and Size Approx. 300 mm x 180 mm, confirming to IS:9583 :1981with Ni-Mh / Ni - Cd Battery, 3 Hrs Back Up, Constant Current Charger, Input Voltage 230 V , 50 Hz including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached as per Rajasthan PWD Electrical BSR 2022 .

Single sided signage

Double sided signage

Supplying, Installation, Testing & Commissioning of floor mounted dust and vermin proof compartmentalised cubical type main fire pump control panel made out of CRCA sheet , required hardware ,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear . Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors and having accessories/ switch gear (as per Specf Ch-06 & 08) as below:- complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" Rajasthan PWD BSR 2021 .

INCOMER

Out going

Description of Work / Item(s)

Amount

Supply / installation / testing and commissioning of 26 persons, 1768 kg in with machine room , 1.0 M/sec travel speed , 6 Stops, 6 Openings , Quadraplex control as per detailed specifications and recommended makes given in RFP.Gearless machine located in the machine room .

Supply / installation / testing and commissioning of 26 persons, 1768 kg in with machine room , 1.0 M/sec travel speed , 5 Stops, 5 Openings , Quadraplex control as per detailed specifications and recommended makes given in RFP.Gearless machine located in the machine room .

Supply / installation / testing and commissioning of Fright lift 4000 kg in with machine room , 0.5 M/sec travel speed , 6 Stops, 6 Openings simplex control as per detailed specifications and recommended makes given in RFP.Gearless machine located in the machine room .

Description of Work / Item(s)

Amount

IP CCTV SYSTEM

5 MP Varifocal Bullet Network Camera -1/2.7'' Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.7 to 13.5 mm Varifocal Auto iris lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, BLC, HLC, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 60m, Support on-board storage up to 256 GB (SD card not included), Alarm : 2 inputs & 2 outputs, Audio: 1 input & 1 output, IP67, IK10, Edge Analytics- Line crossing detection, intrusion detection, Scene change detection, Motion detection, Face capture, audio exception detection, Video tampering, Region entrance detection, Region exiting detection, False alarm reduction through human and vehicle target classification based on deep learning UL/BIS, FCC, CE certified.

5 MP IR Fixed Bullet Network Camera -1/2.7 inch Progressive Scan CMOS, 2592 × 1944 at 25fps, 4 mm Fixed lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, BLC, HLC, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, Alarm 1 inputs, 1 outputs, Audio 1 inputs, 1 outputs, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Region entrance detection, Region exiting detection, Scene change detection, Face capture, Video tampering, audio exception detection, False alarm reduction through human and vehicle target classification, UL/BIS, CE, FCC certified.

5 MP IR Fixed Dome Network Camera -1/2.7″ Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.8 mm Fixed lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, BLC, HLC, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), Alarm : 1 inputs & 1 outputs, Audio: 1 input & 1 output, Built-in Microphone, , IP67, IK 10, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Face capture, Region entrance detection, Region exiting detection, Video tampering, Audio exception detection, Focus on human and vehicle targets classification based on deep learning UL/BIS, CE, FCC certified.

5 MP IR Fixed Dome Network Camera for LIFT -1/2.7" Progressive Scan CMOS, 2560 × 1920 at 20fps, 2.8mm Fixed lens, 0.005 Lux at F1.6, 0 Lux with IR on, ICR, support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, BLC, HLC, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, Edge Analytics- Line Crossing Detection, Intrusion Detection, Motion Detection, Video Tampering, UL/BIS, FCC, CE certified

4MP IR Outdoor PTZ Camera with 32X: 1/1.8" Progressive Scan CMOS, 2560 × 1440 at 25fps, 5.9 mm to 188.8 mm, 32× Optical, 16x digital zoom, Color: 0.005 Lux at F1.5, B/W: 0.001Lux at F1.5, ICR, support H.265, MJPEG, 120 DB WDR, 3D Digital Noise Reduction, HLC, BLC, Defog, Tripple individually configurable stream, 24 VAC & Hi PoE, IR range: 200m, Pan: 360° endless, Tilt: From -15° to 90° (auto-flip), Pan Speed - from 0.1°/s to 160°/s, Preset Speed: 240°/s, Tilt Speed- from 0.1°/s to 120°/s, Preset Speed: 200°/s, Presets- 300, Alarm Input-2-ch alarm input, Alarm Output-1-ch alarm output, Smart Tracking, Audio-1 channel input & output, Support on-board storage up to 256 GB, IP66, IK 10, Edge Analytics: Face Capture, Intrusion Detection, Line Crossing Detection, Region Entrance Detection, Region Exiting Detection, Video Tampering Detection, Motion Detection, Audio Exception Detection, UL/BIS, CE, FCC certified.

Supply , Installation , Testing and commissioning of Hybrid SAN as per detail specifications and Preferred makes enclosed in rfp

Supply , Installation , Testing and commissioning of12 TB Enterprise HDD as per detail specifications and Preferred makes enclosed in rfp

Client PC with Intel i7 with 12 or higher generation processor ,16GB RAM , 4GB graphics card and 1TB minimum SSD.

Video Management Software

Supply , Installation , Testing and commissioning of Server for Video Management Software as per detail specifications and Preferred makes enclosed in rfp

SITC of VMS server hardware to install VMS Software

Baggage Scanner

X-Ray Security Baggage Scanner: High performance with HD image, strong penetration, precise recognition,Adopts embedded windows operating system with multi core ARM,Energy saving and environment protection with low power consumption,64X zoom in, Supports real time monitoring,Tunnel size of 659 mm W x 504 mm H, Power on selfdiagnosis, multi levels user management, image management, TIP management, curve diagnosis, keyboard diagnosis, equipment information query, Multi format image export, OSD operation function, image mirroring,1 -64 times stepless zoom in, magnifying glass, operator training, precise positioning of baggage images, clear channel reminder, one key shutdown,Shock proof design

Emergency Call Box

Panic Alarm Station with inbuilt Camera: 2 MP HD IR Camera, IR Distance ≥ 10 m,Video collection and all-day monitoring with 2 MP HD camera,Wide dynamic range (WDR) and high light compensation (HLC),Multiple communication protocols: TCP/IP, SIP, RTSP, and ONVIF,Two-way audio function with up to 5 m communication distance; build-in high sensitive microphone,H.264, H.264 SVC and H.265 video compression standard, and G.711U and G.726 audio compression standard,Supports network adaptive and video and audio adaptive to realize low latency,Adopts embedded Linux operation system and high-performance embedded SOC processor,Tamper Proof, RJ45 10 M/100 M Self-adaptive Ethernet Port, Standard Micro SD card Slot, Supports Micro SD/SDHC/SDXC Card, Max. 256G,12VDC or PoE,-40 °C to + 60°C

Display For VMS Sever: 31.5" 1080P, HDMI/VGA input, view angle: 178°/178°, 300cd/㎡, plastic casing, VESA, base bracket included, 7*24h

Supply , installation , testing and commissioning of Acrylic wing material , Swing barrier with two- way Mifare Card. 650 mm passageway width. Left lane as per detail specifications and Preferred makes enclosed in rfp

Supply , installation , testing and commissioning of Acrylic wing material. Value series swing barrier with two-way Mifare Card. 650mm passageway width. Middle lane,as per detail specifications and Preferred makes enclosed in rfp

Supply , installation , testing and commissioning of Acrylic wing material. Swing barrier with two- way Mifare Card. 650mm passageway width. Right lane ,as per detail specifications and Preferred makes enclosed in rfp.

Supply , installation , testing and commissioning of Swing Barrier Left Lane,as per detail specifications and Preferred makes enclosed in rfp

Supply , installation , testing and commissioning of Swing Barrier Right Lane, as per detail specifications and Preferred makes enclosed in rfp

Supply , installation , testing and commissioning of Mounting BASE-Single lane module, as per detail specifications and Preferred makes enclosed in rfp

Supply , installation , testing and commissioning of Mounting BASE- Expansion module, as per detail specifications and Preferred makes enclosed in rfp

LED Display/Interactive Display

Supply , Installation , Testing and commissioning of LED Screens as per detail specifications given in RFP and of following sizes

136" diagonal in 16:9 Aspect

86" and above

75" and above

65" and above

Supply , Installation , Testing and commissioning of Decoder: Decoding 16- ch 12MP or 128-ch 1080P, 16; 10M/100M self-adaptive Ethernet interface, HDMI/BNC output, H.265/H.264+/H.264, 3*3 video wall control, Alarm: 8 Ch Input & 8 Ch Output, Two-Way Audio, 1 RS-232, 1 RS-485 AS per detail specifications and Preferred makes enclosed in rfp

Boom Barrier

Barrier type: Straight boompole Barrier Material: CRS (Cold Rolled Steel) Rising Speed & Falling Speed: 3s Dimension /Length: 4m, Boom Pole Height: 890 mm Arm moving direction: Leftward (DS-TMG4B0-LA(4m)) / Rightward (DS-TMG4B0-RA(4m)) Input power supply: 220 VAC± 15%

79 GHz MMIC with higher resolution and more stable detection. Adopted with latest algorithm to filter the interference to radar from the advertising barrier, applicable to advertising barrier, fence, and straight boom pole. Able to recognize the target moving direction, applicable to mixed entrance and exit scenes. Adjustable detection distance and width with convenient operation and strong universality. Free of learning, applicable to more complex environments. Communication via RS-485 or Wi-Fi. Wi-Fi version is equipped with mobile phone application, with which you can debug and upgrade the radar with convenient operation.

79GHZ, Beam width: Vertical 34°, Horizintal 12°, relay output

Wired Three-button Controller for Opening/Closing Boom Barrier manually

1/1.8′′Progressive Scan CMOS, 1920 × 1200 at 25fps, 3.1 to 9 mm lens, support H.265, H.264, 3D Digital Noise Reduction,12 VDC, PoE (802.3af), Support on-board storage up to 128 GB (TF card not included), License Vehicle detection with inbuilt independant automatic License plate recognition system working on optical character recognition technology. Camera should provide clear image of license plate along with recognized license plate no. and capture time, UL, CE, FCC certified.

Software for Entrance & Exit Software

Door Frame Metal Detector

Supply , Installation , Testing and commissioning of Digital Metal Detector Door: • 18 independent detection zones; • 11 kinds of working frequency available or manual setting from 7000 to 8999Hz, • Precisely detects passing passerby and alarmed passerby via infrared ray • Detects metal objects thrown through the door • Detects all metal objects more than 2cm above the ground •Detects multiple metals in different positions of the human body simultaneously • Distinguishes ferromagnetic from non- ferromagnetic metal objects • Anti-interference design, multiple inspection door working at the same time without mutual interference

Supply , Installation , Testing and commissioning of Surveillance SD card 128GB for DFMD

Passive Network Solution:

Supply of 10G, ETL Verified Category 6A U/UTP Cable, White jacket, 4 pair count, LSZH Sheath as per IEC 60332-3-22

Supply of Category 6A U/UTP Loaded Patch Panel, 24 port, Intelligent Upgradable

Supply of Cat 6A-10G, Solid Low Smoke Zero Halogen as per IEC 60332-3-22, Cordage Modular Patch Cord, BLUE Jacket, 7 Feet

Supply of Cat 6A, 10G Information Outlet, Color BLUE

Supply of Cat 6A-10G, Solid Low Smoke Zero Halogen as per IEC 60332-3-22, Cordage Modular Patch Cord, BLUE Jacket, 3 Feet

Supply of Cat 6A-10G, Solid Low Smoke Zero Halogen as per IEC 60332-3-22, Cordage Modular Patch Cord, BLUE Jacket, 10 Feet

Supply of 3*3, Square faceplate One port with Shutter

Fiber solution -

Supply of 6 Core, Multi Mode(OM4), Bend-Insensitive, Indoor/Outdoor, Gel-Free Cable, 6 fiber single-unit, Meet Standard ANSI/TIA-568-C.3

Supply of 19" Rack Mount, 12/24/48 Fiber LIU, 1U Sliding shelf with 4 slots for accepts 4 Nos. of LC Multi mode, OM4 Cassette/Adapter Plate.

Supply of 12 LC Cassettes/Adapter plate, Multi Mode(OM4), Aqua, Intelligent Ready

Supply of LC to Unconnectorized, Multi Mode(OM4) Fiber Pigtail, LSZH Sheath, yellow jacket, 3 ft

Supply of Fusion Splice Kit/Splice Trays, for 1U Shelf

Supply of Modular Panel Blank Adapter Plate

Supply of LC to LC, Bend-Insensitive, Multi Mode(OM4) Fiber Patch Cord, 1.6 mm Duplex, LSZH Sheath as per IEC 60332-3, 10 Feet.

Supply, Installation,Testing and Commissioning OF 1U Horizontal Cable Manager

Supply, Installation, Testing & Commissioning Backbone Connectivity for Voice Providing and fixing KRONE type telephone tag block in MS box with MS sheet hinged cover, with 50 pairs.

Supply, Installation, Testing & Commissioning Backbone Connectivity for Voice Providing and fixing KRONE type telephone tag block in MS box with MS sheet hinged cover, with 100 pairs.

Supply, Installation, Testing & Commissioning Backbone Connectivity for Voice Providing and fixing KRONE type telephone tag block in MS box with MS sheet hinged cover, with 1000 pairs.

Supply , Installation , Testing and commissioning of 4K Video Wall Display : 55" LCD large screen, 1080P, Direct-lit LED backlight, VGA, HDMI, DVI, DP, USB input, Ultra-narrow 3.5 mm bezel design, 500cd/㎡, view angle : Horizontal 178°, Vertical 178°, RS232 IN × 1, RS232 OUT × 1, Active Display Area: 1018.08 (H) mm × 572.67 (V) mm, Operating temperature : 0 °C ~ 40 °C (32 °F ~ 104 °F), Storage Temperature: -20°C to 60°C (-4°F to 140°F), Along with wall mounting brackets as required for installation on existing wall complete in all respect per detail specifications and Preferred makes enclosed in rfp

Supply, Installation, Testing and Commissioning of HDMI - 5 Meters

False Flooring Solution for Server Room: Supply Installation Testing & Commissioning of False Flooring of appropriate height.

RACKS

SITC of 42U Closed Network Rack with front glass door, rear steel Double door, 800mmx1000mm, castor wheels, 2 Equipment Shelf, 15 Amp, AC power supply Vertical with 16 sockets- 2 nos, 4 fans at top Mounted, with atleast 15 1U cable managerseach rack, earthing kit and Mounting Accessories.

Supply, Installation,Testing and Commissioning OF 9/12U, 600mm x 600 mm wall mount network rack with all accessories

Active networking components

Router

SITC of edge router as per detailed technical specification and preffered make mentioned in RFP

Core Switch

SITC of Core Switch in HA: Supply , installation , Testing and Commissioning of Core Switch with 5 yrs Warranty as per detailed specifications and Prefered make

Access Switces

SITC of 24 Port Access Switch POE: Supply , installation , Testing and Commissioning of 24 port POE Access Switch with 5 yrs Warranty & required SFPs as per detailed specifications and Prefered make

SITC of 48 Port Access Switch non POE: Supply , installation , Testing and Commissioning of 48 port non-POE Access Switch with in 1 RU fixed Form factor populated with 4*10G LR SFP with 5 yrs Warranty as per detailed specifications and Prefered make

SITC of 24 Port Access Switch POE: Supply , installation , Testing and Commissioning of 24 port Non-POE Access Switch with & required SFPs 5 yrs Warranty as per detailed specifications and Prefered make

SITC of Firewall with,.to be configured in HA with 5 yrs Warranty as per detailed specifications and Prefered make

Supply, Installation, Testing & Commissioning of 10G SFP+ Module for Single Mode Fiber Cable. Typical reach of 10 Km on 9/125 μm SMF.

Wireless Access points and controller

SITC of Indoor Access Point radio should be minimum 2x2 MIMO with 2 special stream on 2.4Ghz and minimum 4x4 MIMO with 4 special stream 5ghz . AP should be supplied with OEM mounting bracket and should be covered under 5 years OEM warranty & support as per detailed specifications and Prefered make

SITC of Hardware based wireless LAN controller to manage both WiFi & Switches from a single GUI.OEM Warranty & support 5 years is required. as per detailed specifications and Prefered make

AAA Authentication server

SITC of AAA Server for user authentications - Identity and Access Management/NAC - Base License supports up to 3000 users. Expand user support to 5000 users with 5 yrs Warranty as per detailed specifications and Prefered make

Smart Integrated data center

Supply installation, testing and commissioning of integrated smart racks as per detail specifications enclosed comprising of 3 racks for servers and storage, network equipments, inbuilt precision air conditioning, Novac fire supression system, CCTV and DVR, LED lighting, IP based biometric access control system, rodent control system, UPS, fire alarm system, iPDUs for 3 phase/single phase supply as required (2 per rack), temperature and humidity monitoring, door switch and water leakage sensors, becon alarm,

PA System

Supply, Installation, Testing & Commissioning of 8 zone Digital Voice Evacuation Master controller with built in 500watt Amplifier. The System shall meet the standards of BS EN54 - 32 & EN 60849. The System Shall have Built in 500W Class-D Amplifier and it should be capable for the EVAC, Paging, PA and BGM functions. The Controller shall have SD card option to store the EVAC and Alert Voice Message. The Controller shall have Speaker line supervision record out and amplifier auto changeover. The Controller shall have following features: Separate Zone volume control at the front side of panel, Status indications on the Panel for EVAC,Fault ,AC,DC ,Fault, ALERT & Fireman mic, Zone capacity up to 96 Zones, 8 programmable Control Input and output, Fireman Microphone with High Priority, THD<1%, Frequency response 80Hz - 20kHz, Up to 1000 Record files, 100V Class-AB Speaker Output.

Supply Installation Testing & Commissioning of 500W RMS Dual Channel Class-D Digital Power Amplifier with Switch power technology for power electricity saving. Amplifier shall have Following Features: 500W RMS per Channel, Amplifier Output 100V, Short Circuit, Power, Tempreature, Overload Protection, Auto Cooling Fans. THD <0.1%, Frequency Response 20Hz - 20kHz, AC & DC Fuse, SNR >80dB.

Supplying, installing, testing and commissioning of Remote Paging microphone with minimum 12 buttons and Busy/Hole Indication. The Microphone Should be suitable for Desktop mounting. Shall have below features Configurable PPT paging mode and Normal Paging Mode. 9 Level of Con?gurable priority. Support 24V phantom Power Supply, System Capacity of 32 Unit Microphone. Signal transmission ensure distance up to 600 meters. Redundancy loop wiring for Microphone Supervision

Supply, Installation, Testing & Commissioning of of 6W Recessed Ceiling speakers with following features:-Speaker Drive 5", Complete metal grille and line matching transformer 100/70V line. Variable wattage tapings of 6 / 3/ 1.5 at 100v, Effective frequency range 110-15kHz (BS6840), SPL@1m/1W=91dB, Peak SPL 97dB complete with necessary mounting hardware & accessories.

Supply, Installation, Testing & Commissioning of of 6W wall mount speakers with following features:-component 7.5", Complete metal grille and line matching transformer 100/70V line. Variable wattage tapings of 5/10W, Effective frequency range 150-15kHz (BS6840), SPL@1m/1W=90dB, Peak SPL 98dB complete with necessary mounting hardware & accessories.

Supply, Installation, Testing & Commissioning of Network cables assembly and any applicable interfaces/cards/supervision modules for main controller, amplifier & paging microphone and any other devices as applicable.

Supply, Installation, Testing & Commissioning of CD player,Disc playback modes,USB Direct playback modes, Tuner / Reception / Transmission, Connectivity USB.

Supply, Installation, Testing & Commissioning of Web/Server based Software Application for System Configuration, Management & Diagnostics

Addressable Fire Detection System Solution: SITC of UL864 10th Edition UL Listed and FM approved Analog Addressable 6 Loop Fire Alarm control panel (expandable upto 50 Loops using same CPU). Panel shall be running on full digital protocol with 32 bit Microprocessor . The Panel shall be complete with 6" color touch screen LCD Display. Fire alarm panel should have minimum capacity of 2500 detectors and devices in any combination and capable of making upto 50 loops in single panel using additional Loop cards. Each addressable loop shall be capable of taking 250 addresses per loop configuring either as all detectors or modules or any mix of both. The panel shall have the Fire Fighter Touch Screen Graphical Display panel to inform & guide Fire Fighters for carrying out Fire Fighting operations. The display shall have Hazmat icons indicating the presence of any explosive gas, liquids, poison,fumes etc. If this feature is not available in fire alarm panel then additional fire fighter touch panel along with necessary hardware and software should be provided by the manufacturers for fire fighters to guide them during emergency without any extra cost. To expedite system troubleshooting, the system cards shall have ground fault detection and diagnostic LEDs by card. In the display,simple building floor plan can be loaded in bitmap or jpeg format, On the map, the user will see an icon indicating the location of the event in the building in addition to a 'You-Are-Here' symbol to tell the responding person exactly where they are in the building in relation to the event. The system shall be polarity insensitive. The panel shall support degrade mode operation and shall have battery backup of 24 hrs in normal condition and 30 minutes in Alarm condition and BMS output connectivity.

SITC of UL864 10th Edition UL Listed and FM approved Analog Addressable Networkable Repeater panel having 32 bit Central processor and 6" colored touch screen LCD display. The panel shall have the Fire Fighter Touch Screen Graphical Display panel to inform & guide Fire Fighter for carring out Fire Fighter operation. The display shall have Hazmat icons indicating the presence of explosive gas, liquids, poison,fumes etc stored on the floor. If this feature is not available in Repeater panel then additional fire fighter touch panel along with necessary hardware and software should be provided by the manufacturers for fire fughters to guide them during emergency without any extra cost. The panel shall have 12 Amps inbuilt power supply having charging capacity of maximum 100AH Lead Acid battery. The panel shall have network card included inside the panel for RS485 communication with other display devices like Graphic screen, repeater panel etc. The panel shall have 5000 event, history-logging capability with online and offline reports. The panel shall support degrade mode operation and shall have battery backup of 24 hrs in normal condition and 30 minutes in Alarm condition.

Supply, Installation, Testing and Comissioning of 2 Core X 1.5 Sq.mm FRLS twisted pair shielded, PVC insulated armoured copper conductor cable.

SITC of UL268 6th and 7th edition compliance and FM approved Intelligent Addressable multi-criteria detector (optical and thermal sensors) complete with standard base, facility to mount in different comprehensive environment, Tri-color detector-status LED with 360 ° view, microprocessor circuitry with error check; detector self-diagnostics and supervision programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) - Fixed: 135°F (57°C) , Field programmable as rate-of-rise or fixed temperature, Polarity insensitive, Superior EMI and RFI immunity, RoHS compliant. Detector shall have in-built isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator feature in detector shall consider Isolator base in place of standard base OR separate Isolator before and after every detector to comply the same without any extra cost (Above Ceiling Level)

SITC of UL268 6th and 7th edition compliance and FM approved Intelligent Addressable multi-criteria detector (optical and thermal sensors) complete with standard base, facility to mount in different comprehensive environment, Tri-color detector-status LED with 360 ° view, microprocessor circuitry with error check; detector self-diagnostics and supervision programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) - Fixed: 135°F (57°C) , Field programmable as rate-of-rise or fixed temperature, Polarity insensitive, Superior EMI and RFI immunity, RoHS compliant. Detector shall have in-built isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator feature in detector shall consider Isolator base in place of standard base OR separate Isolator before and after every detector to comply the same without any extra cost (Below Ceiling Level)

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7), Manual Pull Station Single Action, Shock and Vibration Resistant, with built in dual isolator, polarity insensitive, Tri color LED for status (Green for Normal,Yellow for Faulty and RED for activation), T-45 Key Reset lockset for easy maintenance, Operating Temp and RH: 0-49degC and <=95%. MCP shall have in-built isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator feature shall provide separate Isolator before and after every MCP to comply the same without any extra cost.

SITC of UL Listed Sounder cum Strobe rated at 75 dBA @ 3m for Audible annunciation and 75cd flashintg at 1 Hz for visual indication.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7), Monitor Module with built in dual isolator, polarity insensitive, Tri color LED for status (Green for Normal,Yellow for Faulty and RED for activation), Operating Temp and RH: 0-49degC and <=95%. Module shall have in-built isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator feature shall provide separate Isolator before and after every Module to comply the same without any extra cost. (For Sprinkler Flow Switches and door holders)

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7), Control Module with built in dual isolator, polarity insensitive, Tri color LED for status (Green for Normal,Yellow for Faulty and RED for activation), Operating Temp and RH: 0-49degC and <=95%. Module shall have in-built isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator feature shall provide separate Isolator before and after every Module to comply the same without any extra cost. (For AHU & Staircase Pressurization Fans, Hooters / Sounders / Strobes etc.)

SITC of UL Listed Addressable Fire Fighter's Telephone Jack with suitable module for two way communication between Remote Fire Fighter & Fire Command Center

SITC of UL Listed Fire Fighter's Telephone Handset for two way communication between Remote Fire Fighter & Fire Command Center.

Supply, Installation, Testing & Commissioning of Response indicator

Access Control and Time Attandance System Solution: Access Control Solution : Supply, Installation, Testing & Commissioning of Access Control Access System Monitoring Hardware Central Work Station Server with i7 Intel processor with minimum 1TB HDD, 16 GB RAM, 22" TFT Monitor, DVD Writer, two serial and one parallel ports, multimedia speakers, infrared mouse; Work station shall be preloaded with requisite MS Windows Licensed software compatible with the Access Control platform

Supply, Installation, Testing & Commissioning of 600 dpi or better A4 size laser color printer

Supply, Installation, Configuration, Programming Web based Access Management Software supports Real Time Monitoring with Auto Push Technology, Template Management, Anti Pass back, Time Zones, Access Time, Access Levels, Access Area, Access Groups & Scheduling, Wiegand Setting, Log Management, Audit Log Reports, Admin Authority Management to define rights of each user to perform, Blacklist User Management, Capable to integrate with 3rd party applications over Web API's with time attendace software for 500 users etc.

Supply, Installation, Testing & Commissioning of Multi modal Face Recognition cum Fingerprint with Smart Card & PIN based Reader cum door controller having minimum 5" LCD Display with Capacitive Touchscreen supports Walk Through Face authentication & verification from 0.3 meter to 3 meters, 256 bit encrypted algorithm to protect important information such as personal information transmitted, Support TLS standard security communication protocols, Live Face Detection with anti-spoofing against 2D photograph, mobile selfie and video, Fake Fingerprint Detection Technology, 20,000 Face Storage Capacity (1:N), 5,00,000 Users on 1:1; 10 million transaction storage capacity, 20,000 Image Logs, support operating illuminance up to 25,000 lux, In built Multi Class (EM & Mifare) Card Reader, Communication protocols like TCP/IP, OSDP/ Wiegand Out / IN, RS 485, USB, NFC, User wise authentication modes; Built in Lock Control; Onboard Dual Camera; Mask Detection & Alert (configurable); Support Thermal Module Integration for Body Temperature Detection, supports SDK/ Web API’s level integration, UL Listed Power Supply, CE, FCC, RoHS, BIS, WPC certifications etc. suitable for mounting on metal surface/metal frames/ wooden frames / wall / flap barriers or as required based on site conditions including all accessories

Supply, Installation, Testing & Commissioning of NO TOUCH Exit Switch with Metal Finish.

Supply, Installation, Termination & Commissioning of EM Magnetic Lock 600 LBS with Door Sense, Mounting Clamp.

Supply Installation Testing & Commissioning of EM Prox Card without Printing

VARINDERA CONSTRUCTIONS LIMITED

Ashoka Buildcon Limited

VASCON ENGINEERS LIMITED

VASCON ENGINEERS LIMITED

VARINDERA CONSTRUCTIONS LIMITED

VISHNU PRAKASH R PUNGLIA LTD

VISHNU PRAKASH R PUNGLIA LTD

Ashoka Buildcon Limited

VARINDERA CONSTRUCTIONS LIMITED

VISHNU PRAKASH R PUNGLIA LTD

Ashoka Buildcon Limited

VARINDERA CONSTRUCTIONS LIMITED

VISHNU PRAKASH R PUNGLIA LTD

VASCON ENGINEERS LIMITED

VARINDERA CONSTRUCTIONS LIMITED

VARINDERA CONSTRUCTIONS LIMITED

Ashoka Buildcon Limited

VISHNU PRAKASH R PUNGLIA LTD

VASCON ENGINEERS LIMITED

VARINDERA CONSTRUCTIONS LIMITED

VISHNU PRAKASH R PUNGLIA LTD

Ashoka Buildcon Limited

VARINDERA CONSTRUCTIONS LIMITED

VASCON ENGINEERS LIMITED

VASCON ENGINEERS LIMITED

VISHNU PRAKASH R PUNGLIA LTD

VARINDERA CONSTRUCTIONS LIMITED

Ashoka Buildcon Limited

VASCON ENGINEERS LIMITED

VARINDERA CONSTRUCTIONS LIMITED

VISHNU PRAKASH R PUNGLIA LTD

Ashoka Buildcon Limited

VARINDERA CONSTRUCTIONS LIMITED

VASCON ENGINEERS LIMITED

Ashoka Buildcon Limited

VARINDERA CONSTRUCTIONS LIMITED

Ashoka Buildcon Limited

VISHNU PRAKASH R PUNGLIA LTD

VARINDERA CONSTRUCTIONS LIMITED

VASCON ENGINEERS LIMITED

VARINDERA CONSTRUCTIONS LIMITED

Ashoka Buildcon Limited

VASCON ENGINEERS LIMITED

Ashoka Buildcon Limited

VARINDERA CONSTRUCTIONS LIMITED

VASCON ENGINEERS LIMITED

VARINDERA CONSTRUCTIONS LIMITED

VISHNU PRAKASH R PUNGLIA LTD

VARINDERA CONSTRUCTIONS LIMITED

VASCON ENGINEERS LIMITED

Ashoka Buildcon Limited

VARINDERA CONSTRUCTIONS LIMITED

Ashoka Buildcon Limited

VISHNU PRAKASH R PUNGLIA LTD

VASCON ENGINEERS LIMITED

Ashoka Buildcon Limited

VISHNU PRAKASH R PUNGLIA LTD