Construction of Shed for attending of yatra issues/ Grievances viz a viz for Camp Directors and for service providers , Infront of adm. Block huts Nunwan, at Nunwan Camp for yatra -2023 .

Amount

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil

Providing, laying and dumping of soling stones of required grade including levelling and compacting complete with all carriages of material complete job.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level graded stone aggregate 20 mm nominal size)using 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with all carriages of material

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level graded stone aggregate 20 mm nominal size)using 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) With all carriages

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal nominal size stone aggregate with all carriages

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Structural steel work welded in build up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Hot finished welded type tubes

Fixing precoated galvanized iron profile sheets 0.50mm+/- 5% total coated thickness (TCT), The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal or with polymer coated J orL hooks boults and nuts 8mm diameter with bitumen and G.I limpet complete

Providing and Fixing precoated galvanized sheets for ridge 0.50mm+/- 5% total coated thickness (TCT), The ridge shall be fixed using self drilling/self tapping screws of required size complete

MANZOOR AHMAD LONE

ISHTIYAQ AHMAD LONE

Ishfaq Ali Din

OVAIS RASOOL

M/S GH MOHD WANI