Construction of Community Shed of Bakule Para at Palsona Village.Sansad-III

Vide P - 1/ It No -2.0 of SOR,PWD (Building) Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Vide P - 2/ It No -4.0 of SOR,PWD (Building) B) Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Vide P - 24/ It No -4.0 of SOR,PWD (Building) Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety

Vide P - 26/ It No -10.0 of SOR,PWD (Building) Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety

Vide P - 42/ It No -36.0 of SOR,PWD (Building) Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works a) Where vertical props are not required

Vide P - 42/ It No -36.0 of SOR,PWD (Building) Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works b) Where vertical props are required

Vide P - 43/ It No -40.0 of SOR,PWD(Building) Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. II. JSW,JSPL,SHYAM,SRMB,ELECTROSTEEL,BMASL,SSL

Vide P - 15/ It No -08 of SOR,PWD (Building) Brick work with 1st class bricks in cement mortar (1:6), (b) In Foundation & Plinth

Vide P - 15/ It No -08 of SOR,PWD (Building) Brick work with 1st class bricks in cement mortar (1:6), (b) In superstructure

Vide P - 189/ It No -1.0 of SOR,PWD (Building) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] a) 10 mm th. With ( 1 : 4 ) to celling , stair etc.

Vide P - 189/ It No -1.0 of SOR,PWD (Building) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] b) 15 mm th. With ( 1 : 6 ) outside

Vide P - 189/ It No -1.0 of SOR,PWD (Building) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] c) 20 mm th. With ( 1 : 6 ) inside

Vide P - 17/ It No -23.0 of SOR,PWD (Building) (a) 125 mm. thick brick work in cement mortar (1:4) in ground floor.

Vide P - 81/ It No -09 of SOR,PWD (Building) Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (GCI sheet to be supplied by contractor) c) With 0.80 mm thick sheet

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Vide P - 103/ It No -9.0 of SOR,PWD (Building) Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (iii) 25 mm. thick

Vide P - 104/ It No -13.0 of SOR,PWD (Building) (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Vide P - 195/ It No -07.0 of SOR,PWD (Building) Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat (i) Water based interior grade Acrylic Prime

Vide P - 196/ It No -08.0 of SOR,PWD (Building) Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (a) One Coat

Vide Page No:-197, Item No:17 of SOR,PWD (Building) Protective and Decorative Acrylic emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.

Vide Page No:-200, Item No:1 of SOR,PWD (Building) (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Vide Page No:-200, Item No:1 of SOR,PWD (Building) a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Vide Page No:-200, Item No:2 of SOR,PWD (Building) (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

Vide Page No:-200, Item No:2 of SOR,PWD (Building) (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)