Reconstruction of store room, Reroofing the mezzainine level and Maintenance Works to the Community Hall in Ramanathapuram Nagappa thevar street in Ward No.63, Central Zone.

Amount

Dismantling the damaged Reinforced cement concrete

Dismantling the damaged CC Flooring

Scrapping the damaged plastering in CM

Dismantling the damaged Brickwork

Dismantling the damaged weathering course with pressed clay tile using power driller including cost of materials and labour charges for demolition and conveyance charges etc complete

Scaffolding charges with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn / PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work.

Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 cum. in volume including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and 2m initial lift as per the direction of Engineer-in-charge

Plain Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm hard blue granite metal by volume for levelling course in foundation trenches manholes inspection chambers etc., including charges for scaffolding , shoring , strutting, bailing out water if necessary ramming , consolidating cuing etc., cost and conveyance of all materials complete in all respects complying with relevant standard specifications at all leads &lifts inside the building

Brick work in cement mortor 1:5 mix (one cement,five sand) using II class table moulded bricks to a size of 9"x4 3/8"x2 3/4" including cost and conveyance of all materials and labour charges for mixing the mortor, constructing, curing to required period and wherever the masonry projection is necessary for elevation shall be done with out extra cost etc complete as per std spn.

Supplying and erecting CENTERING AND SHUTTERING with necessary supports for plane surfaces such as RCC footings etc., with all cross bracings using mild steel sheets etc., complete

Supplying and erecting SHUTTTERING including necessary supports for plane surfaces such as RCC COLUMN etc., using Mild steel sheets of Suitable size and BG 10 stiffened with Welded mild Steel etc.,

Supplying and erecting CENTERING AND SHUTTERING with necessary supports for plane surfaces such as RCC SLABS, LINTEL SUNSHADES, etc., with all cross bracings using mild steel sheets etc., complete

Supply fabrication and placing in position ofmild steel rod of various sizes as directed including all labour charges for cutting and binding and tying with cost of binding wire etc., complete as per standard specification

Reinforced Cement concrete 1:1.5:3 (one cement, one and a half sand and three aggregate) using 20mm hard broken granite stone jelly for foundation and basement including laying consolidating finishing curing etc complete complying with standard specification

Filling with well gravel layer by layer including watering , consoldating etc complete

Plastering with cement mortor 1:3 mix (1 part cement and 3 part sand) for dubbing with chemical Treatment and finishing with the same mortar of 20mm thick including scaffolding etc complete

Plastering with cement mortor 1:3 mix (1 part cement and 3 part sand) using 10mm thick

Plastering with cement mortor 1:5 mix (1 part cement and 5 part sand) using 12mm thick

Supply and fixing of MS Pipe including cast and conveyance of the material and labour charges for cutting,bending,welding and fixing etc complete

Supply and laying of Galvolume sheet roofing of 0.45 mm thick cost including laying using steel screws with necessary washers and labour charges

Flooring finishing with first quality design vitrified glazed tiles of all colours of size 600mm X 600mm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete

Providing Wall Skirting with cement mortor 1:3 mix (one part of cement and three part sand) of approved quality and colour including pointing with colour cement etc complete

Painting with plastic emulsion paint two coats along with base coat of approved quality (ISI Standard) paint as per the standard specification. (The paint to be used should be got approved by the Executive engineer before use on work)

Paiting with wood Paint Two Coats Over Base Coat for wood Work of approved colour & brand

PAINTING new IRON WORKS for doors, windows and Ventilators, Iron bars Weld mesh, wire mesh, screen, steel bars, flats and other similar works etc., with TWO COATS of approved first quality of synthetic enamel paint over a base coat of red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification. The paint to be used should be got approved by the Executive engineer before use on work.

Wiring with 2x15 Sq.mm (22/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A.F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour PVC concealed light or fan point.

Supply and Fixing of 4' 20W LED tube light fitting of approved brand including labour charges for fixing in wall and ceiling with necessaey accessories like clips,screw etc complete

Supply and fixing of 1200mm (48") AC ceilling fan complete with stepped electronic 300W regulator with 1.1 meter down rod on the existing clamp

Supply and Fixing of Street light of 48W LED Bulb of approved brand and quality with required materials like pipe, clamp etc

Wiring with 2x15 Sq.mm (22/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 150mm x100mmx113mm TW switch box with 3mm thick hylum sheet cover for 5A.3PIn non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour for concealed PVC plug point.

Wiring with 2x4 Sq.mm (56/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 150mm x100mmx113mm TW switch box with 3mm thick hylum sheet cover for 15A.3PIn non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour for concealed PVC Power plug point.

Supply and run off 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed CU conductor of 1100V grade in rigid PVC pipe concealed in wall and ceilling with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour

Supply and run off 2x4 sq.mm (56/0.3) PVC insulated SC unsheathed CU conductor of 1100V grade in rigid PVC pipe concealed in wall and ceilling with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour

Supply and run off 3x4 sq.mm (56/0.3) PVC insulated SC unsheathed CU conductor of 1100V grade in rigid PVC pipe concealed in wall and ceilling with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour

Supplying and Laying TAMIN Block Providing and laying of 80 mm thick high strength type conforming IS 15658-2006 of TAMIN Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paver sweeping transporting loading unloading of laying paver block as per the standard specifications

Supply and Fabrication of steel door with L angle and MS Sheet including cutting, bending,welding and including labour charges for fixing in position etc complete