ADDITION/ ALTERATION AND IMPROVEMENT TO EXISTING MI ROOM (P-100) AT INS MANDOVI UNDER GE (P) NAVY MANDOVI

Amount

EXCAVATION AND EARTHWORK

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ disintegrated rock complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/ disintegrated rock complete all as specified and directed.

Removing excavated material to a distance exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

BUILDING PORTION

Taking down cement plaster of any description on stone /PCC block /brick wall / top of chajja etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris to outside of INS Mandovi Area including filling of open joints in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 15 mm (10+5) thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 in two layers i.e first layer 10 mm thick and 5 mm thick outer layer mixed with WPC as per manufacturer's instruction and finished surfaces even and smooth without using extra cement including necessary scaffolding complete all as specified and directed. Note: WPC shall be measured and paid under relevant item of Schedule.

Supply only integral waterproofing compound complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 5 mm thick on fair faces of brick work or concrete ceiling surfaces in cement mortar 1:3 finished even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces, priming the surface with alkali resistant priming paint, applying 1mm thick wall care putty and distempering with two coats of distemper oil emulsion, white or tinted complete all as specified and directed.

M & L for preparation of newly plastered ceiling surfaces and applying three coats of whitewash complete all as specified and directed.

M & L for complete removal of existing treatment of any type of distempered wall surfaces, preparation of the surface, applying 1 mm thick wall care putty wherever required and applying two coats of oil bound distemper of any tint complete all as specified and directed.

M & L for preperation of old plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed.

M & L for preparation of old decorative wall surfaces, ceiling cornices etc by brooming, scrapping down dust particle, smoke soot, moulds, moss and efforescent salts etc, making surface smooth by applying ready mix putty where ever required and applying two coats of acrylic emulsion exterior paint complete all as specified and directed.

M & L for providing precast cement concrete block masonry with solid blocks, exc 10 cm in width, of PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and setting in CM 1:6 complete all as specified and directed.

M & L for providing RCC (nominal mix) 1:2:4, type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S & F mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish to a distance exc 250 m but n. exc 1000m, spreading and levelling, complete all as specified and directed.

M & L for providing 15 mm thick screed bed or bedding layer of cement mortar 1:3 for laying floor finishes complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete vertical surfaces as back coat for tiling in cement mortar 1:4 complete all as specified and directed.

M & L for providing vitrified ceramic tiles, light shade, 600 x 600 x 10 mm thick (square/ rectangular), polished, area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for providing non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for providing granite (of any type) tiles, 20mm thick, table rubbed and polished, in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.

M & L for providing vitrified ceramic tiles, light shade, 600 x 600 x 10 mm thick (square/ rectangular), polished, area of each tile not exceeding 0.36 sqm in skirting of vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for providing glazed ceramic coloured tiles in vertical surface, 350 x 250 x 7 mm/ 450 x 350 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 sqm each, with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4.0 sqm each, with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F factory made 2nd class hard wood plain, framed, panelled shutter (two panel), 40mm thick, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces and size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F fiber glass reinforced plastic (FRP) door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness, with 2 mm thick laminte moulded with fire resistant grade unsaturated polyester resin and chopped mat and filled with suitable wooden block in all the three legs; frame covered with fiber glass from all sides and including M S stay provided at the bottom to steady the frame, as specified by the manufacturer, complete all as specified and directed.

S & F 30 mm thick fiberglass reinforced plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings; with polyurethane foam (PUF)/ polystyrene foam as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P laminate conforming to table 3 of IS: 14856 as specified by the manufacturer, complete all as specified and directed.

M & L for providing 18 mm thick marine waterproof plywood, grade BWR, type BB, grade 2 quality, interior grade, commercial type, fixed with screws to timber framed work for kitchen cabinet , cupboards etc, ISI marked, conforming to per IS 710, complete all as specified and directed.

M & L for providing 0.9 mm thick decorative laminate type I, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F butt hinges, 50 mm size, extruded brass, with mild steel hinge pin, bright polished, type E-11 complete all as specified and directed.

S & F 100 mm long brass handles, cast type, polished bright for cupboard cabinet etc. complete all as specified and directed.

S & F ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S & F aluminium mortice lock, 2 lever, vertical type, size 65 mm complete all as specified and directed.

M & L for providing 9 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium work complete all as specified and directed.

S & F powder coated anodised aluminum frame for door, sliding windows, ventilators; with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F powder coated aluminium door shutters, using aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised snap beading, screws complete all as specified and directed.

S & F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, using aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S & F powder coated aluminium grill of design DG-104 pattern, made out of 10mm dia rod fixed with and including standard aluminium frame of 'F' section of size 23.4 x 15.3 x 1.4 mm thick all as per manufacturer's instructions complete all as specified and directed.

S & F 6.5 mm thick sheet glass, ordinary quality and glazing with oil putty/ beading in squares exc 0.5 sq. m in each pane, in aluminium windows/ ventilators complete all as specified and directed.

S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/ beading in squares exc 0.5 sq. m in each pane, in aluminium windows/ ventilators complete all as specified and directed.

S & F 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S & F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples complete all as specified and directed.

S & F in repairs aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples complete all as specified and directed.

Taking down steel tubing and connections of 15 mm dia bore complete all as specified and directed.

Taking down steel tubing and connections of 20 mm dia bore complete all as specified and directed.

Supplying and laying of CPVC pipes of 20 mm outer dia, SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC pipes of 25 mm outer dia, SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

S & F in repairs stop valves, copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends, for iron pipes or for unions of 15 mm dia bore complete all as specified and directed.

S & F in repairs pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with fly nuts screwed for iron pipes of 15 mm dia bore complete all as specified and directed.

S & F in repairs bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm dia bore complete all as specified and directed.

S & F PVC connections of 15 mm size and 450 mm long with PTMT nuts complete all as specified and directed.

S & F in repairs PTMT soap dish of approximate size 160 x 160 x 90 mm fixed on wall complete all as specified and directed.

S & F in repairs brass, tubular towel rail, chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S & F in repairs 2 in 1 health faucet with hook, chromium plated, with 1.5 m tube complete all as specified and directed.

S & F in repairs brass chromium plated shower rose, 125 mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs ball valves to CPVC pipe of 20 mm dia bore complete all as specified and directed.

S & F in repairs wash basins, vitreous China flat back, 550 mm x 400 mm size, including cutting for and pinning in ends of brackets or erecting stand, including brackets and 32 mm dia polyethylene waste pipe of low or high density or PVC complete all as specified and directed.

S & F in repairs vitreous China wash down water closet pan (pedestal pattern), white, excluding fixing bolts, flushing cister and flush pipe; including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle, and connections to pipes and fixing of chain and pull, or lever, if any, including 32 mm dia flush pipe of polyethylene of low or high density or PVC complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S & F PVC (SWR) pipes of 75 mm dia bore, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F PVC (SWR) pipes of 110 mm dia bore, single socketed in any length with solvent cement jointed fixed to walls complete all as specified and directed.

S & F 50 mm dia high density polyethylene (HDPE) pipes of pressure rating 6kgf/cm2 fixed complete to walls, ceilings or in floors including necessary fittings complete all as specified and directed.

M & L for providing PVC (SWR) multi floor trap of 110 mm dia outlet, plain with grating including jointing with solvent cement, fixed in repairs, complete all as specified and directed.

S & F PVC (SWR) bends of 110 mm dia bore, any radius, with acess door complete all as specified and directed.

S & F PVC (SWR) bends of 75 mm dia bore, any radius, with acess door complete all as specified and directed.

S & F ordinary rat tail rod pattern door springs, brass, 300 mm long, including roller and roller plate complete all as specified and directed.

S & F in repairs door closer, hydraulically regulated, designation No. 3, universal type, aluminium (die cast) body, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S & F aluminium anodised, barrel tower bolts of extruded section, 200 mm size complete all as specified and directed.

S & F extruded aluminium alloy handles, fabricated type, anodised, of 150 mm size complete all as specified and directed.

S & F stainless steel hinges, 125 mm size complete all as specified and directed.

S & F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, of 30mm wide flaps (when open) complete all as specified and directed.

S & F floor door stopper of aluminium alloy body and tongue, anodised with hard draw steel spring, 150mm overall length of cover plate complete all as specified and directed.

S & F mild steel clamps; hold fasts; wall ties and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M & L for providing PCC 1:3:6 type C1 using 20mm garded stone aggregate, for fixing hold fast complete all as specified and directed.

S & F in repairs stainless steel sink, 1.00mm thick for laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; complete all as specified and directed.

S & F in repairs bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm dia bore complete all as specified and directed.

S & F venetian blinds made of approved fibre cloth blinds, including powder coated aluminium sliding tracks of standard medium weight sections and ceramic rollers complete all as specified and directed.

Demolition of reinforced brickwork in suspended slabs, beams, lintels etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

S & F wire netting of stainless steel wire, 1.40mm dia, and size of mesh 25 mm, fixed with tinned tacks of stainless steel wire staples including necessary frame of steel complete all as specified and directed.

M & L for providing sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for providing machine pressed precast conctete interlocking paver block any shape and size, of 60 mm thickness, M-35 grade, rubber moulded confirming to IS 15658-2006, fixed with grey cement & pigment complete all as specified and directed.

M & L for providing screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M & L for providing chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors (over plinth protection), with grey cement and no pigments complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F mild steel conforming to Fe.290.Gde-E-165 for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and directed.

S & F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc in Fe-290 Gde E-165 complete all as specified and directed.

M & L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F mild steel Fe-410W (Gde E-250 Quality A) plates, plain or chequered, 5mm thick or over in thickness in available sizes, complete all as specified and directed.

S & F 0.63 mm thick, plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed), with grade of zinc coating 275, complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

INTERNAL ELECTRIC SUPPLY

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc to match existing surface complete all as specified and directed.

Taking down MCB, DB, main switch, sheet metal enclosure etc, any type and capacity including making good the disturbed surfaces to match existing surface, complete all as specified and directed.

Taking down ceiling fans, any type and depositing in MES store complete all as specified and directed.

M & L for point wiring complete with 1.5 Sqmm 1100 volts grade single core PVC insulated unsheathed FRLSH cable with multistranded copper conductor confirming to IS-694, Part II, ISI marked, drawn through and including medium grade PVC conduit of size not less than 20mm dia, ISI marked with all accessories, concealed in walls/ floors, including concealed modular box suitable for logic modular switches, sockets, etc and logic modular white plates, sorroundings of suitable size as required at site and including providing 1.5 sqmm 1100 volts grade single core PVC insulated unsheathed FRLSH cable with multistranded copper conductor in green colour as earth continuity conductor connected to common earth dolly for the following complete all as specified and directed. Notes: 1. Quoted rate shall be deemed to be inclusive of cost of metal box and concealing the same in wall including cutting chasis in wall/ floor/ ceiling and making good disturbed surface with PCC work and paint etc. 2. Quoted rate shall be deemed to be inclusive of provision of modular cover plate with frame and blank plates (Snow White /white color) as per approved make of switches/sockets / suitable as per site requirement.

One light/ fan point controlled by one, one-way switch

One bell point controlled by one, one-way bell push

One 5 Amp 5 pin socket outlet point on same board with other switches

One 5 Amp 5 pin socket outlet point on independent board

M & L for point wiring complete with 4 Sqmm 1100 volts grade single core PVC insulated unsheathed FRLSH cable with multistranded copper conductor confirming to IS-694, Part II, ISI marked, drawn through and including medium grade PVC conduit of size not less than 20mm dia, ISI marked with all accessories, concealed in walls/ floors, including concealed modular box suitable for logic modular switches, sockets, etc and logic modular white plates, sorroundings of suitable size as required at site and including providing 4 sqmm 1100 volts grade single core PVC insulated unsheathed FRLSH cable with multistranded copper conductor in green colour as earth continuity conductor connected to common earth dolly for one 15 Amps 6 pin switch socket outlet point complete all as specified and directed. Notes: 1. Quoted rate shall be deemed to be inclusive of cost of metal box and concealing the same in wall including cutting chasis in wall/ floor/ ceiling and making good disturbed surface with PCC work and paint etc. 2. Quoted rate shall be deemed to be inclusive of provision of modular cover plate with frame and blank plates (Snow White /white color) as per approved make of switches/sockets / suitable as per site requirement.

S & F switch, modular type, single pole, one way, 5/ 6 Amp, 1 module, for 230V 50Hz AC supply complete all as specified and directed. Make: Havells Model Signia or equivalent as specified in List of Manufacturers.

S & F switch, modular type, single pole, one way, 15/ 16 Amp, 1 module, for 230V 50Hz AC supply complete all as specified and directed. Make: Havells Model Signia or equivalent as specified in List of Manufacturers.

S & F socket outlet, multipurpose, modular type, having provision for 3 pin 5/6 Amp and 2 pin, 2 module, for 230V 50Hz AC supply complete all as specified and directed. Make: Havells Model Signia or equivalent as specified in List of Manufacturers.

S & F socket outlet, multipurpose, modular type, having provision for 3 pin 15/16 Amp and 3 pin 5/6 Amp, 2 module, for 230V 50Hz AC supply complete all as specified and directed. Make: Havells Model Signia or equivalent as specified in List of Manufacturers.

S & F in repairs bell, musical tune type, with battery as required, suitable for single phase, 230 volts 50 Hz supply complete all as specified and directed. Make: Anchor Model No 22659 or equivalent as specified in List of Manufacturers.

S & F power unit with concealed metal box for mounting power unit suitable for 3.5 KW electric load complete all as specified and directed. Make: Legrand Cat Part No. 6755 58 or equivalent as specified in List of Manufacturers.

S & F modular metal fush box, 2 module, concealed socket and power unit complete all as specified and directed.

S & F ceiling rose, surface bakelite, 65 x 50 mm, three terminals, 240 V complete all as specified and directed.

S & F in repairs LED wall light fitting, 1 x 24 watt, 220V AC, cool white, box type with driver and LED lamp, including connecting with three core flexible copper conductor cable of suitable size from ceiling rose to fitting upto maximium length of 1.5m, complete all as specified and directed. Make: Philips Model No. Ultron3628 Slim LED Wall light cool white ( 24 W) or equivalent as specified in List of Manufacturers.

S & F in repairs LED tube light fitting, 10 watt, 220V AC, LED batten with square profile extruded and polycarbonate, including connecting with three core flexible copper conductor cable of suitable size from ceiling rose to fitting upto maximium length of 1.5m, complete all as specified and directed.

S & F ceiling fans complete with down rods, electronic modular type regulator and all accessories, 230 V, 1200 mm sweep, BEE five star rated with brushless direct current (BLDC) motor, wattage upto 28 watt, minimum air delivery of 210 CFM, service value 6.00, including connecting with 3 core flexible wire from ceiling fan to ceiling rose and marking of MES No complete all as specified and directed. Note: Contractor shall submit warranty/ guarantee cards to Engineer-in-Charge.

S & F exhaust fan, 300 mm sweep single phase 230/240 volt AC supply 50 Hz, PVC body with blades, frames and louvers, fixed with suitable bracket, nuts, bolts and fixing arrangement, including making/ resizing holes and making good the opening in cement mortor 1:3 or cement concrete 1:2:4 type B1 as per site requirement complete all as specified and directed.

S & F wall mounted air circulator fans, 450 mm sweep single phase 230/240 volt AC supply 50 Hz, metal body fixed with suitable MS bracket, nuts, bolts and fixing arrangement, including making/ resizing holes and making good the opening in cement mortor 1:3 or cement concrete 1:2:4 type B1 as per site requirement complete all as specified and directed. Make: Bajaj Model: Supreme Plus Air Circulator Plus or Orient Model 450 mm Tornado or Crompton Model sstorm2 450 mm or Havells Model : Turbo Forceor equivalent as specified in List of Manufacturers.

S & F distribution board, TPN 4 way, concealed on wall for MCBs fitted with bus bar, neutral link, earth bar and Din rail suitable for use on 415V, 50 Hz AC supply, double door, MCB 4 pole and incomer and SP & SPN as outgoing, complete all as specified and directed.

S & F MCB TPN 63 Amp 415V, 10 kA complete all as specified and directed.

S & F distribution board, SPN 8 way, concealed on wall for MCBs fitted with bus bar, neutral link, earth bar and Din rail suitable for use on 240V, 50 Hz AC supply, double door, complete all as specified and directed.

S & F RCBOs for earth leakage, overload and short - circuit protection, 32 Amp DP 100 mA complete all as specified and directed.

S & F miniature circuit breaker (MCB) SP and current varying capacity of 6 to 32 Amp, 240 Volts, 'B' curve, 10kA breaking capacity complete all as specified and directed.

M & L for providing submain wiring with two runs of 6 sqmm single core multistranded PVC insulated FRLSH sheathed cable 1100 Volts with copper conductor and one run of 6 sqmm single core PVC insulated FRLSH sheathed cable 1100 Volts with copper conductor as continuous earth wire drawn through and including rigid PVC conduit of size not less than 20mm dia, concealed in wall, with all accessories such as tees, elbows, junction boxes, reducers etc as required, connecting to existing main switch board/ distribution board and testing on completion and making good disturbed surfaces and painting to match with existing surface complete all as specified and directed. Note: Two runs of 6 Sqmm cable, one run of 6 Sqmm earth wire and one run of PVC conduit shall be measured as unit length.

M & L for providing submain wiring with two runs of 4 sqmm single core multistranded PVC insulated FRLSH sheathed cable 1100 Volts with copper conductor and one run of 4 sqmm single core PVC insulated FRLSH sheathed cable 1100 Volts with copper conductor as continuous earth wire drawn through and including rigid PVC conduit of size not less than 20mm dia, concealed in wall, with all accessories such as tees, elbows, junction boxes, reducers etc as required, connecting to existing main switch board/ distribution board and testing on completion and making good disturbed surfaces and painting to match with existing surface complete all as specified and directed. Note: Two runs of 4 Sqmm cable, one run of 4 Sqmm earth wire and one run of PVC conduit shall be measured as unit length.

M & L for providing earthing complete with steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground, vertically (earth pit not less than 2.25 mtr below ground level) with top edge of plate not less than 1.5 mtr below ground level connected to GI earth wire 4mm dia by means of bolts, nuts, check nuts and washers etc of GI as shown on electrical plate No 3 of SSR part 1, including 20mm dia light grade GI protection pipe upto 7.5m length, 20 mm dia light grade watering pipe, GI watering funel with wire mesh, PCC earth chamber filled with alternate layer of charcoal and common salt, 100mm thick cover with PCC 1:3:6 type C-2, neccessary excavation in disintergrated hard rock, filling earth upto 15 mm thick, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed.

M & L for providing 6 mm dia galvanised iron wire as earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground through GI pipe not less than 20 mm dia or drawn in conduit/pipe of size not less than 20 mm dia concealed in wall/ ceiling or fixed to poles or any other indicated situation for loop earthing etc. as required complete all as specified and directed.

Supply, install, test and commissioning of outdoor type LT Feeder pillar box, made out of 3.0 mm thick CRCA sheet, totally enclosed in weather, dust and vermin proof enclosure as per IS, with front and rear openings, suitable locking arrangement, having copper bus bar of 250 Amp capacity for RYB and neutral and insulated with insulators, including connecting incoming and outgoing cables, necessary foundation in PCC 1:3:6, suitable angle iron frame 50 x 50 x 6 mm duly fixed 30 cm above ground and comprising of components as mentioned here-in-after complete all as specified and directed. Make: CPRI approved manufacturer Note: Quoted amount shall be demmed to be inclusive of cost of necessary internal wiring for indication lamps, rigid bus bar connections from bus bar to MCCB terminals, connection bus to MCCB/MCB connections etc.

Incoming (a) MCCB 125 Amp 4 pole 16 kA - 02 Nos (b) ON Load Change over switch 200 Amp 4 pole - 01 No

Outgoing MCCB 63 Amp, 4 pole , 16 kA - 03 Nos

FIRE FIGHTING Note : Contractor shall submit a detailed multi-color single line diagram of the fire fighting system duly marked with location of fire Alarm panel, smoke detector, MCP and same shall be printed and displayed in the building near to Fire Alarm Panel on a display board made with particle board of size 1.0 X 0.5 Mtr after completion of work on site. The quoted rate for fire fighting items shall be deemed to inclusive of the same.

Supply, installation, testing and commissioning of fire alarm control panel complying with BSEN 54, single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules, minimum 160 charactor LCD display, complete with power backup inverter of rating 1 KVA with maintenance free battery for backup in case of power failure complete all as specified and directed.

Supply, installation, testing and commissioning of addressable type multisensor smoke detectors, with heat and smoke combination, photoelectric/ optical, complying with and type certified to EN - 45, with base with self in-built intelligence as per IS: 11360 including suitable fixing arrangements complete all as specified and directed.

Supply, installation, testing and commissioning of addressable type heat detectors, complying with and type certified to EN - 45, with base with rate of rise cum fixed temperature as per IS:2715, provided as per site requirement, complete all as specified and directed.

Supply, installation, testing and commissioning of addressable manual call point, resettable type, in ABS enclosure complete as per specification complete all as specified and directed.

Supply, installation, testing and commissioning of addressable electronic sounder cum strobe with ABS enclosure complete as per specification complete all as specified and directed.

Supply, laying, testing and commissioning PVC insulated, PVC sheathed, galvanized steel strip or wire armoured, electric control cables, heavy duty, with stranded copper conductor of size 3 Core 2.5 Sq mm, 1100 Volt grade complete all as specified and directed.

M & L for providing rigid non-metallic PVC conduit of size not less than 20 mm dia inclusive of junction boxes, tees, bends, elbows, reducers, bell-mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., concealed in wall and surface type on ceiling complete all as specified and directed.

EXTERNAL ELECTRIC SUPPLY

Supplying, laying, jointing, testing and commissioning of LT XLPE insulated, armoured, heavy duty electric cables with aluminium conductor of following sizes, shielded core type wrapped with tape screwed galvanized strip, suitable for earthed system for 1100V, AC 50 cycle including centre glands, lugs, jointing materials etc, laid in trenches/ fixed on walls, including taking out old unserviceable cables complete all as specified and directed. Note: Excavation, earthwork and cable protection shall be measured and paid separately under relevant items of this schedule.

50 Sq mm 3.5 Core

10 Sq mm 4.0 Core

Supply and laying GI tubing of 50 mm dia bore, light grade, ISI marked, galvanised, laid in trenches/ fixed to walls/ poles/ structures etc for cable protection/ road crossing including fittings such as bends, elbows, reducers etc complete all as specified and directed.

Supply and laying double wall corrugated (DWC) HDPE pipe of 50 mm dia bore, made of polyethylene (PE) with smooth internal and profiled external surface, for non pressure, suitable for laying undergound cables including bends, connected coupler fittings for jointing etc, confirming to IS and of approved colour complete all as specified and directed.

M & L for providing earthing complete with steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground, vertically (earth pit not less than 2.25 mtr below ground level) with top edge of plate not less than 1.5 mtr below ground level connected to GI earth wire 4mm dia by means of bolts, nuts, check nuts and washers etc of GI as shown on electrical plate No 3 of SSR part 1, including 20mm dia light grade GI protection pipe upto 7.5m length, 20 mm dia light grade watering pipe, GI watering funel with wire mesh, PCC earth chamber filled with alternate layer of charcoal and common salt, 100mm thick cover with PCC 1:3:6 type C-2, neccessary excavation in disintergrated hard rock, filling earth upto 15 mm thick, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed.

S & F in repairs LED solar street light fitting, 50 watt, with in-built lithium ion battery, solar panel, charge controller, dusk down sensor, complete with asthetically designed decorative hot dipped galvanised mild steel step pole 3.0 Mtrs high, including mounting accessories and foundation bolts with grey powder finish, compitable for fixing solar luminaire of max base mouting dia 76 mm, including necessary PCC foundation and earthwork complete all as specified and directed. Make: Bajaj Cat Part No - BSZSL 40 or equivalent as specified in List of Manufacturers.

S & F in repairs posttop lantern, LED type, 40/45 watt, 230 volts AC, outdoor type, 360 degree indirect light, with IP 65 protection, impact and corrosion resistant, complete with driver and lamp, decorative type with aesthetically designed decorative hot dipped galvanised mild steel step pole of 3.0 Mtr high, including mounting accessories and foundation bolts, with grey powder finish, compitable for fixing LED posttop luminaire of max base mouting dia 76 mm, including necessary PCC foundation, earthwork, and provision of 3 core 1.5 Sq mm cable from terminal connection to posttop complete all as specified and directed. Make: Havells Cat Part No - enDurasPrinG6PT35Wle D757PsYmToTG or Wipro Cat Part No. Post Top : DECO POLE 3M TOP Ø 76 MM or equivalent as specified in List of Manufacturers.

S & F in repairs LED flood light fitting of 70 Watt, 230 V AC, outdoor type with thermal management in multiple optics and equipped with IP66 protection, impact and corrosion resistant, with driver and lamp, including necessary fixing arrangement with MS clamp, suitable size bolts, nuts, washers etc for fixing on bulding walls/ pillars/pole/ bulding sunshade or on ground with necessary PCC block foundations complete all as specified and directed.

SEWAGE DISPOSAL

Demolition and breaking up drain pipes (salt glazed ware, AC or PVC) of 160 mm internal dia, set in cement mortar, complete all as specified and directed.

M & L for concrete bed to drain pipes of 160 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 complete all as specified and directed.

S & F PVC (SWR) pipes of 160 mm dia bore, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position such as in bed for drain pipe etc complete all as specified and directed.

M & L for providing cement concrete 1:3:6, type C2 using 40mm graded stone aggregate as in foundations for pole and stay, filling and mass concrete complete all as specified and directed.

Demolition of precast concrete articles and precast concrete block walling built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for pre-cast cement concrete block masony with solid blocks of precast cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate), exc 10cm in width and set in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster, any description on stone/ PCC block/ brick wall or including raking out joints, hacking for key, scrubbing down with water etc and removal of debris to outside of INS Mandovi area including filling of open joints in cement mortar 1:6 complete all as specified and directed.

M & L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; copings, kneelers, apex stones, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M & L for providing precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in landings, cover slabs (for man holes etc.) chajjas and similar articles with plain faces including chamfers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to match complete all as specified and directed. Note: Reinforcement steel shall be measured and paid separately under relevant item of Schedule 'A'.

S & F mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Note: An amount of Rs 19,651.00 on account of Credit Schedule for Schedule A Part I shall be deducted from the total amount of BOQ to arrive at Contract Sum.

Ramesh Enterprises (BID ID -3414142)