SPECIAL REPAIRS TO BLDG NO.P-124 (KD COY) AT MRC UNDER GE SAUGOR

Amount

S&F pre- coated coloured galvalume Aluminum Zinc coating profile pattern steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa and AZ150 as in roof covering/ clading to wall, including crimping sheet at end fixed with self tapping screws including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed.

S&F precoated coloured 0.45 mm thick Aluminum Zinc coating galvalume sheet for ridge having tensile strength of 550 Mpa and AZ150 fixing for closing gable truss suitable for profile pattern sheet fixed with self driving screws including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed.

S&F roof trusses ( framed), trused, purlin, crane gantries, raills and fastenings and heavy braket framing (beams, tee , angle,channel or flat sections) including distance pices, cleats etc(welded/reviting) conforming to Fe 410-W (Gde-E250) quality 'A' complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of surfaces over 10cm width or girth complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old painted steel surfaces of any desription over 10cm width or girth incl preparation ofsurfaces such as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed

M&L for PCC ( 1: 2: 4) type B-1 (using 20 mm graded stone aggregate) etc on roof top as in levelling course / padding to maintain the slope,finished the surface even and fair without using extra cement complete all as specified & as directed .

M&L for 10mm thick plaster in CM 1:4 mixed with water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified (Note : Water proofing compound shall be measured & paid separately)

M&L for water proofing roof treatment comprising with following items on RCC roof with approved modified membrane of weight and other specifications as described in Srl No.8.04 below including taking down of old roof treatment of any description including mud phushka, lime, concrete, tiles, cement plaster padding upto n exc 20 cm depth from roof surface etc including cleaning, brushing and watering to joints and grooves and removing debris to a distance exc 1.5 km complete all as specified and directed (Note:-The height of the roof may upto 9 m):-

The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting.

Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated.

Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm.

Laying of water proofing APP modified polymeric water proofing membrane HMHDPE 4 Kg plain (total weight of the finished membrane not less than 4.0 kg/ sqm ± 5 % per sqm) ( thickness 2.8 mm )composed of 100 micron (+10% ) high density polyethylene sheet (HMHDPE) as center core, which is sandwitched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps100 mm as per manufacture instruction etc.

Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm.

Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces, complete all as specified and directed by Engr-in-charge.

S&F 600mmx600mmx4mm thick ‘E’ Board Classic (Make-Everest industries Ltd) Design Lake & hill as in false ceiling including supply and fixing GI ‘Tee” grid frame work made of special section of M.S galvanized sheet 0.30mm thick , bottom portion painted with cellular nitro painting, warping the suspending wire around the existing wooden/steel purlin /rafter for suspending grid frame work of size 605mmx605mm suspended with 4 mm dia GI wire @ 1200mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mmx24mmx0.60mm, cross runner tee 37mmx24mmx0.60mm and perimeter angle of 24mmx24mmx0.50mm thick. Perimeter angle to be fixed to wall with GI screw of 40mm long @ 450 mm c/c along the perimeter of wall including applying two coats of distemper oil emulsion complete all as specified and directed including dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness and any description, including cover fillets etc, complete all as specified.

M&L for walling of random rubble stone masonry, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) including demolition of stone masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed. complete all as specified and as directed by Engineer-in-Charge.

Demolition of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified & directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed

M&L for brick work with with sub class 'B' bricks, straight orcurved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed

M&L for rendering 20mm thick cement plaster in cement mortar 1:6 on stone masonary fair faces / other than fair faces finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / Concrete surfaces of finishing the surfaces even and smooth complete all as specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified & directed.

M&L for rendering two coat of cement plaster on stone masonry surfaces or surfaces other than fair face of brick work ,first coat 15 mm thick in cement mortar (1:6) and second coat cement plaster 10 mm thick in cement mortar (1:4) with WPC @ 3% by weight of cement, finished the surfaces fair and even complete all as specified & directed. Note:-WPC shall be measured and paid seperately under respective item

M&L for rendering two coat of cement plaster on fair/other than fair faces of brick or stone masonry surfaces, first coat 15 mm thick in cement mortar (1:6) and second coat 10 mm thick in cement mortar (1:6) finished the surfaces fair and even complete all as specified and directed.

M&L for rendering 10 mm thick on ceiling in cement mortar (1:3), finished the surfaces fair and even complete all as specified & directed.

Supplying only Integral water proofing compound ISI marked complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-1 using 20 mm graged stone aggregate as in floors finished rough to receive the tiles complete all as specified & directed.

M&L for nonskid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match colour/shade including 15mm thick screed bed layer in CM 1:6 ncluding dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed

M&L for glazed ceramic coloured tiles on vetical surfaces size 600mm x 300mm x 7mm to 8 mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles ncluding dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed

Taking down chowkhats or frame exc 1.50 Sqm but not exc 4 Sqm each with shutters (with out taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frame not exc 1.50 Sqm each with shutters (with out taking off shutters from the frames) complete all as specified and directed.

S&F pressed steel frames of size 125mm X 60 mm with rebate on both side including necessary fixing lugs, hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) complete all as specified and directed.

S&F pressed steel frames of size 105mm X 60 mm with one or more rebates including necessary fixing lugs, hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregates) as in filling of hold fast, chowkhats etc, complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed

S&F stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed

S&F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 sqm in each pane complete all as specified & directed..

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed

S&F factory made PVC door frame of size 50 mm x 47 mm made out of 5 mm prelam PVC sheet cut at corner and jointed with 02 Nos 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member) complete all as specified and directed

S&F 35mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (without sash bars) edges of farrming plain chamfered or rounded fitted with cut and mitred beads for securing glass etc ,size of member of shutter as specified in SSR Part -I ,section 8,clause 8.20(a) complete all as specified and directed

S & F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,incl 03 Nos of 100mm size stainless steel butt hinges for each shutter complete all as specified and directed

S&F powder coated anodised aluminium ventilator shutters, half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion, aluminium sections weighing 0.55 kg/m complete all as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel of 125 mm and fixed with screw complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 200 mm and fixed with machine made screws complete all as specified and directed

S&F aluminium handles 150 mm size, cast type, anodised. and fixed with machine made screws complete all as specified and directed

S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

M&L for prepration of newly plastered wall sufaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed. Make Asian ACE or equivalent make as specified in Appx 'C' of Particular Specifications

M&L for prepration of new wall surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion paints over a coat of wall primer incl. preparation of surfaces of walls complete all as specified and directed

M&L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed.

M&L for complete removal of existing treatment on walls and prepration of old surfaces and applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer including properly making of 'V' shaped crackes and filling of all crakes with crakes seal of walls complete all as specified and directed

M & L for complete removal of existing treatment on wall and prepration of old surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of 'C' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion paints over a coat of wall primer including preparation of surfaces of walls complete all as specified and directed

M&L for applying two coats of white wash on old decorated ceiling surfaces including prepration of old surfaces complete all as specified and directed.

Demolition of PCC and pavings n exc 15 cm thickness below or above ground level (unreinforced) including removal of debries complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in mass concrete as in foundation filling and mass concrete complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2, (using 40mm graded stone aggregates) as in plinth protection surface finished even and smooth without using extra cement & provided with construction joint on the interval not more than 3.0m and filled with bitumen and sand mortar in 1:3 complete all as specified and directed.

M&L for Kota stone flooring 14 mm to 16 mm thick in riser of steps, skirting, dado etc size not less than 550mm mirror polished Machine cut Kota stone laid over and including 20 mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing including dismantling of Kota stones and tiles laid, bedded and pointed in any mortar of any description or thickness etc complete all as specified and directed

M&L for grinding and polishing mirror finish of existing Kota stone slab flooring complete all as specified and as directed

M&L for 18mm to 20mm thick Granite slab of any shade ( table rubbed and polished ) machine cut for floor /shelves in steps, jambs, pillars, window cills& cooking plateforms over 15 mm thick cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs laid bedded and pointed in any mortor complete all as specified and directed

M&L for rounding to the edge of stone slabs one edge such as in steps, cooking plateform and other similar situations complete all as specified &directed.

M&L for cutting chases, pinning in, Stone, concrete block or slab walls for concealed water tubing and making good, in cement mortor 1:3 cutting not exceeding 20cm girth complete all as specified and directed.

S&F in replacement 15mm bore Galvanised mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in replacement 20mm bore Galvanised mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges fixed with and including chromium plated screws and wooden /plastic cleats (min wt 190 grams) complete all as specified & directed.

S&F in repair vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) and including connection to trap & to flushing pipe anti syphonage pipe etc (excluding flushing cistern) complete including making good to floor complete all as specified and directed.

S&F in repair PVC valveless Syphonic action type, Flushing cistern 10 litres capacity low level, white with inlet ball valve float handle and flush pipe 32 mm bore and brackets complete all as specified and directed.

S&F in repair vitreous China wash hand basin white flat back of size 550mmx400 mm (overall) and including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia incl waste pipe and with centrally fixed brass chroium plated 15 mm bore pillar tap fancy type including 32 mm sink coupling complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F in repair vitreous China urinal half stall type flat back of size 375mmx395mmx590mm (minimum) white with grating and union for discharge pipe, waste pipe, urinal spreader PTMT incl PVC connection 15 mm bore and 450 mm long complete all as specified and directed.

S&F in repair bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S & F in repairs brass chromium plated shower rose fancy type , as approved by GE, with or without swivel joints, including fixing to steel pipe complete all as specified and directed.

S&F PVC connections 15mm bore size 450 in length with both end brass/pvc high quality nuts complete all as specified and directed.

S&F in repairs stop valves/angle valve 15mm bore cast copper alloy chromium plated, fancy type, cast copper alloy screwed down, high pressure, with scrutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs CP angle valve / concealed stop cock cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed bnoth ends for iron pipe 15mm bore complete all as specified and directed.

S&F in repair 25 mm bore SS Pipe curtain rods including SS Brackets & SS decorative dome, suitable for door/widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes single soketed in any length with rubber ring jointed and fixed to walls complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floorscomplete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with suitable size mild steel clamps complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia with accessable door complete all as specified and directed.

S&F PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 75 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed. .

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S& F in repairs of 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement complete all as specified and directed.

M&L for 15mm thick Plastering in CM 1:4, with water proofing compound at the rate of 3% by weight of cement and finishing the surface even and fair in sunken portion including rubbish off the premises complete all as specified and directed

M&L for applying evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet/bath including cleaning of surfaces complete all as specified and directed

M&L PCC 1:7:12 type F2 using 40 mm graded brick /stone aggregate as in filling (sunken portion) etc including removal of existing fillers complete all as specified and directed

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc complete all as specified and directed.

Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity complete all as specified and directed.

M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLSH insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC trunking of size not less than 20mm ISI marked ivory white, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed:-

One light, fan point controlled by one switch

One 5 Amp independent socket point controlled by one switch

One 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.93 here in before but for power point wiring using with 2.5 sqmm PVC-FR LSH insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed.

S&F modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed.

S&F socket modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed.

S&F switch modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed.

S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed.

S&F ceiling rose, surface backlit,three terminal complete all as specified and directed.

S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.

S&F modular fan step regulator 120W 2 module complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete all as specified and directed.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED bulb 10 watt suitable for angle / batten holder fitting complete all as specified and as directed.

Taking down and refixing connecting of ceiling fan and exhaust fan after, greasing complete including connecting with copper wire complete all as specified and directed.

M&L for concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit not less than 20mm bore ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed.

M&L for concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 04 runs of 01 Single core of size 10 sqmm (for main current and earth ) drawn in & incl PVC conduit not less than 20mm bore ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 10 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed.

S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.

S&F testing and commissioning of MCB SP 63 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.

All as per Srl item No.110 above but SPN 40 Amps, 240 V -ditto-

S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed.

S&F double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 63 MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed.

S&F MCCB 63 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs complete all as specified and directed. .

S&F in replacement double door metallic sheet metal enclosure for MCB DB double door TPN 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed. Note :- The quoted rate shall deemed to be included for cutting and chasing in stone masonary and making good to disturbed surfaces

S&F in replacement of TPN 63 Amps 415 V including making electrical coming/outgoing connections with lugs/thimbles complete all as specified and directed.

M&L for provn of earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs complete all as specified and directed.

Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 25 sqmm, 4 core complete all as specified and directed.

Excavation in trenches not exceeding 1.5 Mtr in depth and not exceeding 1.5 mtr wide for laying of cable complete all as specified and directed.

Removal of excavated material not exceeding 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Returning , filling in including spreading, leveling and well ramming in layers not exc 25 cm thick complete all as specified and directed.

M&L for dry sand cushioning 8 cm before and 15 cm after laying of the cable complete all as specified and directed. Note:-Punned thickness shall be measured and paid

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250mm x 150mm x 40mm complete all as specified and directed.

M&L for 40 mm dia GI pipe light grade laid under road and path for passing cable complete all as specified and directed.

m/s mohansingh

AJIT SINGH TUTEJA

M K Construction