Upgradation of APHQ (Phase I) (Repairing and renovation of Honble DGP chamber, entry passage, visitor room, work stations, toilet etc at APHQ, ulubari, Guwahati 5 under MOITRI Scheme (APWD SOR 2013-14)

Amount

Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels

Dismantling of existing steel windows/ steel ventilators/ steel windows and steel ventilators without damaging the walls, removing to a safe place and necessary repairs to the edges of walls.

Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. (i) Area of door/window up to 3.00 m2

Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

Demolishing mosaic floor of various thickness, both mosiac tiles and cast-in-situ type including CC base course and removal of debris as directed for all levels.

Demolishing the plastering from walls/ R.C.C. and P.C.C. members without causing any damage to the wall/ member upto any height including disposal of debris as directed for all levels.

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand)

20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (backing coat 15 mm and finishing coat 5mm thick)b) In cement mortar 1:4

Providing and fixing in position concealed G.I. sections for paneling using High Pressure Steam Cured), pre-primered, self-embossed, designer cement board or the non-primered, plain Fibre cement boards of 6mm thickness confirming IS 14862-2000 fixed on the supporting "W' profile (0.55mm thick) having a knurled web of 51.5mm and two flanges of 26mm each with lips of 10.55mm ) placed @600mm c/c vertically and 11200mm c/c horizontally in perimetre channel (having one flange of 20mm and another flange of 30mm with thickness of 0.55mm and web of length 27mm).Perimetre channel is fixed on the floor and the ceiling with the nylon sleeves @ 300mm c/c with expandable fasteners. Board is fixed to the "W" profile with 25mm long self embedding type Fibre cement Screws @ 300mm c/c, all complete as per the drawing & directions of Engineer-in -charge. The boards may be finished so as to have a uniform gap/groove or Flush finish.The flush finish should be done with Elasto prefab joint sealant. Internal Jointing Compound and paper tape as per the procedure laid down by company.Note: Alternatively, the uniform gap/groove may be covered with decorative molding or may be finished with Jointing filler including 2 coats of acrylic emulsion paint of approved shade/make, over a coat of cement primer before installing it on the grid as required. I) Everest Plain FC board or equivalent

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)a) a) Normal range Somany/ Orient/Nitco /Varmora/Jhonson make ii) Of size 600mmx600mm and above

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.i)Normal range (Sizes 300 mm x 300mm and above)Somany made- Durastone (Unpolished heavy duty Vitrified Tiles) b). Deluxe

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).b) Executive range Somany/ Orient/Nitco/Asian Make i) Of size 200mmx300mm and above

Supplying and installing uPVC- Casement Door made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC sections of wall thickness 2.4mm, multichambered with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, locking arrangement, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent.(a) Single leaf Side hung Door using uPVC section of size 58mm x 69mm x 2.4mm thick wall for frame, 58mm x 109mm x 2.4mm thick wall for glass sash, Aluminium threshold at bottom (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)i) Using 5mm clear glass

Supplying, fitting and fixing MAC blinds horizontal and vertical complete as specified and directed by the department at all levels.(B) Horizontal blinds vi) 25 mm pearl finish blind

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (i) 9.5mm thick

Providing and fixing of Bamboo Cladding as per Direction make of natural Bamboo of 8mm thick, fixing with Screw including framing with wooden Beat of size 600mm width including all necessary fitting as directed.

Providing, fixing and finishing Plyboard Panelling size 1200mm x 2400 mm of 19mm thick, fixed over Sal Wood/Gypsteel Frame of size 50mmx 38mm & 50mmx50mm made of required section as per design specified, complete with necessary hardware and fittings as specified and directed. (19mm thick Plyboard)

Providing and fixing Plywood lining with tongue and groove joint leaving a gap of 10mm as per drawing including fitting and fixing with countersunk screws with the frame work complete (frame work to be measured and paid separately). 12mm thick

Supply fitting and pasting Veneer sheet of size 1200 mm x 2400 mm of 4 mm thick as per choice of design and texture, fixing with necessary adhesive as directed.

Providing and fixing Teak wood lining with tongue and groove joint leaving a gap of 10mm as per drawing including fitting and fixing with countersunk screws with the frame work complete (frame work to be measured and paid separately). 40 mm thick.

Providing and applying two coat of sealer of approved brand make Asian/Berger to make increased the adhesion of malamine on wood/veneer surface after smoothing rough surface with sand paper and wait for 12 hours for dry. After that sanding to remove excess amount sealer and spray one coat malamine over wood/veneer surface after being mixed with solvent and hardener including resanding with water paper after drying and reapplying the Melamine 2/3 times as required for smoothing the surface before applying the final malamine polish as directed by the departmental engineer.

Supply fitting and pasting Sunmica sheet of size 1200 mm x 2400mm of 1mm thick as per choice of design and texture, fixing with necessary adhesive as directed.

Providing and fixing 1st class timber moulded architrave of size 50x20mm to door and window frames with countersunk wood screw,wooden plugs and applying a coat of wood preservative on unexposed surface etc. (a)With Teak wood/Sissu wood.

Providing, fitting and fixing of 12mm thick toughened transparent glass partition with etching as per design to be fixed on hinges on wall and partitions and supported on floor and as per design.

Providing,fitting and fixing Carpet tiles of size 500x500mm with thickness not less than 4mm made of 100% Olefin Polypropleyne material,with dual backing; Primary backing with PVC and Secondary with Reinforced Fibre glass from Uniproducts (India) Ltd.laid on existing concrete floor complete as directed and specified x) Ural Brand

Providing Fitting and Fixing PVC floor bit as per choice of design all around the floor edges , fixing with necessary nails/screw as directed.

Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness,joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) a) With Teak wood / Sissu wood.(i) 40 mm thick with panel inserts of 20mm thickness.

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)(i) Thickness = 1.5 mm thick

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Supply fitting and pasting of wall paper on existing painted wall surface as per choice of design and texture with glue and edges cut to give a even look both vertical and horizontally.

Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ) e) Butt hinge.i) 125mm x 50mm x 4mm

v) Door stopper with rubber stopper

p) Drawer locks ii) 50mm

q) Cupboard locks ii) 50mm

u) Wardrobe knob

x) Magnet catcher

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )m) Mortice lock vertical type v) pin cylinder Mortise Lock Oliver/Matiz/Victoria -Godrej make

Supplying, fitting, fixing Heavy duty Drawer Channel( Slides) of approved make as per choice including necessary screws etc. complete as directed.

Providing,fitting and fixing Door closer of various type UL listed and fire rated good quality depending on the door specification.Types like single speed,Double Speed,Heavy Duty etc are available and as directed & specified by the department.B) Fire Rated Door Closer-EN rated Godrej Make c) Fire rated Track Arm Door Closer Model LKYGDC610

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal) (A) Parryware Make (a) White (i) Duke 660 x 495 (Cat. No.C8416/27) (white/coloured)

Counter Top Basin (B) Hindware Make (a) White (iv) Topaz (Cat. No.91028)

Providing fitting and fixing Vitreous china Dual Flush / Floor Mounted Coupled / Extended water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)B) Hindware make (vi) Rubbic (inclusive of seat cover and fittings) (Cat. No. 92064) (P Trap)

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)ii) Hindware make a) White (i) Sleek+ PVC cistern

Providing fitting and fixing Decorative Mirror complete as directed and specified.(A) Parryware Make (b) Size 600mm x 450mm

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (ii) Agmeco Make (a) Cubin (Cat. No.CB-00102)

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified.(b) Sona (iii) Rupa 50mm (HT/ FT) (Cat.No.WS-0801)

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (III ) Lauret brand (ii) 15mm dia (Concealed with adjustable wall flange))(Lauret)

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. VII)Marc Brand (c) Pillar cock (Oyster series)

Supplying fitting and fixing Telephonic Chrome Plated (C.P.) shower of approved brand as directed and specified. (Pipes will be measured and paid separately) (II)Lauret make (Telephonic hand shower with 1.5 m PVC pipe with hook)

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) (d) 25 mm dia

(f) 15 mm dia

Supplying fitting and fixing of Glow sign board size 600mm x 1000mm as directed by the Department.

Supplying fitting and fixing Brass logo of Assam Police size 1200mm x 900mm as directed by the Department.

Supplying fitting and fixing Bamboo partion size 1400mm x 1800 mm as choice by the Department.

M/S Choudhury Engineering Works