PROVN OF WATER SUPPLY SYSTEM, 04X SOAKAGE WELL FOR 150 USERS AT REGIONAL NETWORK CENTRE(RNC) AND CERTAIN MINOR WORKS UNDER GE (WEST) LUCKNOW

Amount

Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes pipes etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

M & L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate for 150 mm bore pipe complete all as specified and directed.

M&L 150mm sail-gllazed stoneware drain pipes laid in trenches and jointed as specified and directed.

M&L for brick work with fly ash bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M & L for Plain Cement concrete Type D2 1:4:8 using 40 mm graded stone aggregate as in foundations, filling and mass and sloping floor concrete complete all as specified and directed

M&L for cement concrete 1:2:4 type B-1 using 20mm stone aggregate as benching copping, surface channel and similar articles finishing even and smooth using extra cement complete all as specified and directed.

Material and Labour for rendering 15mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs for man holes, drains, soak well etc and similar articles etc, set in CM 1:4 complete all as specified and directed.

S&F for mild steel deformed bars or TMT bars 8 to 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F for mild steel deformed bars or TMT bars 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed

M&L construction of soakage well of size 3.6M dia x 6.0M effective depth with fly ash bircks and RCC M-25 design Mix using 20mm graded stone aggregate as in cover slab etc. including all required earthwork in soft/loose soil, returning filing and removal etc and filling of brick bats and cement concrete etc complete all as shown on CELZ drawing No TD/576 sheet 1/2 & 2/2 complete all as specified and directed.

M&L Cutting into existing man holes/spectic tank for connection of new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channels (1/2 round or 3/4 section) in cement concrete 1 : 2 : 4 type B1 smooth finished and reforming benching complete all as specified and directed.

S&F galvanized steel water tubing medium grade of 40mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed

All as per item No 15 above but bore size of tubing is 50mm complete all as specified and directed.

All as per item No 15 above but bore size of tubing is 80mm complete all as specified and directed.

supply and Fixing Gun-metal globe or gate valves 40mm bore with iron wheel head, screwed both ends for iron pipe including taking down complete all as specified and directed.

All as per item No 18 above but bore size of Gun-metal globe or gate valves is 50mm complete all as specified and directed.

S&F sluice valve connection & testing ISI marked both ends flanged and drilled cast iron body 80mm class PN-1 conforming to IS-14846/2000 complete with gun metal spindle including necessary nut bolts etc complete all as specified and directed

Cutting in position existing steel tubing 40mm bore for alteration or repair including screwing/threading complete all as specified and directed.

All as per item No 21 above but bore size of tubing is 50mm complete all as specified and directed.

Drilling & tapping cast iron water mains in position for branch connection of size 15mm bore complete all as specified and directed

All as per item No 23 above but bore size is 20mm complete all as specified and directed.

Construction of valves pit chamber of size 650x650x650mm (internal dimension) using PCC (1:4:8) 40MM graded stone aggregate for foundation 15cm thick, 23 CM thick brick wall in CM (1:4), 10mm thick rendering al around the brick work with 1:6 CM, PCC (1:2:4) type B1 coping with 20mm graded aggregate for grouting MS frame including 4mm thick MS top sheet cover with locking arrangement including 50mm paD lock with double key arrangement, MS frame out of 40x40x5mm thick angle including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer finishing coat including necessary excavation in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs complete all as specified and directed

S&F in repair DI specials ISI marked for pressure water mains up to 150mm bore spigot and socket Tee, pieces, single or double branch connection or collar etc. complete all as specified directed (Note – Excavation and earth work shall be measured and paid for separately).

M & L for Surface excavation not exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out as in hard/dense soil complete all as specified and directed

M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in sub base of floor complete all as specified and directed

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; including dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortal 1:3 (1 cement 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exc 15cm thick (below or above ground level) complete all as specified and directed.

Demolition of brick or stone/boulder masonry built in cement or cement lime mortar complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:4 including using waterproofing compound @ 3% by weight of cement on fair faces of brick walls or concrete surfaces and finishing surface even and fair complete all as specified and directed.

Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and applying neat cement slurry @ 3.00 Kg/Sqm complete all as specified and directed.

M & L for exterior grade cement concrete tiles of Ist quality 10-12mm thick as in floors/ pavings etc sett and jointed in neat cement slurry and pointed with mixtured of white cement and pigment over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes with 1:4 cement mortar complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m but not exc 2.00 Sqm each and refixing in same opening after adjusting and repair complete all as specified directed.

M&L Vitrified Ceramic coloured tiles light shade 8 to 10 mm thick (square/ rectangular) polished, joint free , area of each tiles not exceeding 0.36 sqm sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

All as per item No 38 above but on vertical surfaces including 10mm thick screed plaser in CM 1:4 , complete all as specified and as directed.

M&L rendering 15mm thick IN CM 1:6 on fair faces of brick work or concrete surfaces finish surface even and smooth (without using extra lime or cement) incuding taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L Preparation of new pastered surface and applying two coat of oil bound distemper over a coat of priming plastered and other surfaces with alkaliresistant priming complete all as specified and as directed.

Excavating in post holes (or similar holes) each n.exc. 0.5 cum getting out, returning, filling in, and ramming earth or broken rubble mixed with earth around in layer not exc 25 cm including watering and removing surplus soil to a distance n. exc 50m and making good surface in soft/ loose soil complete all as specified and directed.

M & L for Cutting holes exc half brick but n.exc one brick in brick walls in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

M&L MS framed work as in truss,purlin or rafter of angle iron including distance pieces cleats etc of Fe 410-w(Gde E-250) qualities complete all as specified and directed.

M & L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L Damp proof course to horizontal or vertical surfaces including necessary formwork as in cement concrete 1:2:4,type B-0 40 mm thick complete all as specified and directed

M & L for Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls, built in, in CM 1:4, EXCEPT BRICK complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of primer complete all as specified and directed.

Fixing only framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including taking down of old framed work grills complete all as specified and directed.

S&F Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Earthing for lightining protection with copper earth plate of size 600 mm x 600 mm x 5 mm thick buried directly in ground not less than 2.25 Mtr deep below ground levels, earth plate placed on all side with charcoal mixed with salt to a thickness of 150 mm connected by copper earth strip of size 32 X 6 mm thick soldered and revetted to earth plate. copper earth strip will be protected by using 50 mm bore GI pipe (light grade) earth plate to test point complete. The earthing includes PCC pit, RCC cover and frame, watering pipe 20 mm bore light grade earth plate to test point, funnel with wire mess e.t.c all as specified and shown in electric plate No 03 of MES SSR Pt-1 2009 print and as directed.

S&F single pointed air terminal alluminium rod 12 mm dia, 300 mm long complete as specified and directed.

Supply & installing copper strip 25 mm X 3 mm buried in ground including necessary excavation complete all as specified directed.

M&L for test point terminal block made of gun metal or phosphoures bronze size 75 mm X 75 mm X 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long not exc height head screw complete all as directed.

S & F water heater storage type electric BEE five star rated of capacity 25 Ltr to operate on 230 volt AC supply, 2000 watt vertical type including 2/4 Nos full threaded fastnar of size 100 x 10mm with nuts and 2 Nos washer, water connection with 02 Nos heavy duty PVC flexible pipe of size 15mm , 450 mm length & suitable poug top of 16 Amp capacity complete all as specified and directed. Note: Product must have 2 years warranty, 2 years warranty on heating element & 5 years warranty on inner tank.

S & F sheet Metal Enclsoure with MCB 20 Amp and metallic socket and top factory made complete all as specified and directed

S&F MCB SP 6 to 32 Amps 240 volts 10 KA breaking capacity on existing DB complete all as specified and directed.

Supply and Fixing PVC connection pipe 15mm bore, 600mm long with PTMT nuts complete all as specified and directed.

S&F CP brass 15mm bore stop/angle valves, cast copper alloy, chromium plated with capstan head, quarter turn, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F GI tubing size 15 mm bore medium grade with screwed socket joint with all fittings such as bend , elbow, Tee, short nipple, diminishing pieces , caps, plucks and unions e.t.c and fixing complete with clips , wall hooks, wooden plucks and making good the disturbed surface match with the existing surface complete all specified and directed

S&F long body 15mm bore bib tap, quarter turn, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

M & L for point wiring for one fan point controlled by one, one way 5 Amp switchwith (FRLS) Fire retradant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia medium grade with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc with provision of new CI/MS terminal boxes with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Fire retradant low smoke PVC insulated copper earth conductor 1.50 sqmm connected to common earth and earth dolly complete for the following:- (Note:- i. Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. ii. switch, fan regulator shall be measured and paid separately)

S & F switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.

S&F swith piano, flush type 15/16 Amp, single pole, one way 240 volt complete all as specified and directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15/16 Amp, 230 volts complete as specified and directed.

S & F socket outlet flush type 5 pin 5/6 Amps 240 volts complete all as specified and directed

S&F bell push single pole one way 5/6 Amp socket outlet point on an independent board .

Supply and fixing in repairs LED lamp 7/9 watt, complete all as specified and as directed.Make: HAVELLS with cat Part No. LHLDEUEEML8R007,Make: Surya with cat Part No.9 W NEO MAX LED LAMP ,Make: C&S Chandra Series with cat Part No.LTHPLEDLAMP7WB22BULB

S&F fan regulator electronic, step up socket type, 230 volt,125 W and conection complete all as specified and directed.

Supply and fixing of ceiling fan 1400 mm sweep, BEE star rated (40-48 Watt), Min air delivery 215 CFM, copper wound motor, AC single phase, 230/240 volt, white colour complete with blades, down rod 300mm long, canopy and provn of connection with 3 core flexible copper cod of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed.

Supply and fixing of ceiling fan 1200 mm sweep, BEE star rated (40-48 Watt), Min air delivery 215 CFM, copper wound motor, AC single phase, 230/240 volt, white colour complete with blades, down rod 300mm long, canopy and provn of connection with 3 core flexible copper cod of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed.

S&F of exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, single phase, 230/240 V, 50 Hz of size 250 mm, sweep 1200 RPM, copper winding and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed.

M & L for making opening in brick wall 230/460mm thick built in cement mortar and making good surface with cement mortar 1:3 including all necessary nuts, bolts, washers etc complete all as specified and as directed.

S&F of exhaust fan single phase, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed. Note:- Old ceiling fan shall be deposited in AGE E/M yard for BER action.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, sockets ceiling rose sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring/ service connection including teak wood batten/ conduit and making good the disturbed surface of walls complete all as specified and directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC(FRLS)insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC (FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed. Note: cutting, chases for concealed point wiring and making good the surface is included

All as per Item No 79 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per Item No 79 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per Item No 79 above but for One bell/ buzzer point controlled by one bell push

All as per item 79 here in before but using 2.5 sq mm PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board complete all as specified and directed.

S&F modular switches 1 way 5/6A,1 module complete all as specified and directed.

S&F modular switches 1 way 15/16A,1 module complete all as specified and directed

S&F modular 5/6 A sockets-5 pin 2 module complete complete all as specified and directed

S&F modular 6A/16A sockets-3/5 pin combine 2 module complete all as specified and directed.

S&F Modular white cover plate with frame 8 modulecomplete all as specified and directed.

S&F Modular white cover plate with frame 6 modulecomplete all as specified and directed.

S&F Modular white cover plate with frame 4 modulecomplete all as specified and directed

S&F Modular white cover plate with frame 3 modulecomplete all as specified and directed.

S&F Modular white cover plate with frame 2 modulecomplete all as specified and directed.

S&F modular bell push single pole one way 6/10 Amp, 240 volt,1 module, fuesh type complete all as specified and directed.

Supply and fix modular type blanking plates, one moudle complete all as specified and directed.

Supply & fixing modular fan regulator 120/100 W, 2 Module for ceiling fan fixed, in board and connecting as directed, after dismantling and removing unserviceable regulator complete all as specified and directed.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed make:Phillips smart brite cat no BN 021 LED 12S 6500/4000 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS10WLED865SPCWH/ HPL Neptune plus 10 W HLPT51510CW

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge. Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS22WLED865SPCWH/ Bajaj LED batten BCLAB 20W WH LED P

M & L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade, watering pipe 20 mm dia GI light grade, GI wire mesh, GI funnel, alternate layer of char coal and salt, PCC chamber, recessed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 complete all as specified and directed .

S&F ceiling rose surface bakelite three terminal complete as specified and directed.

S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed.

S&F MCB single pole 40 to 63 Amp, 240 volts, single pole & neutral complete all as specified and directed.

S&F MCB TPN 63 Amp 415 volt 4 pole complete all as specified and directed

S&F in repairs double door VTPN 4 way double door suitable for 4 pole MCCB 63-125A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties,earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed ( Note: MCCB & MCB to be measured and paid seprately)

S&F MCCB 63-125 Amps 415 volts, 4 pole 16 KA breaking capacity complete all as specified and directed

S&F sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

Supply and fixing modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed

Taking down electric meter and refixing on new board after rewiring in replacement of unservicable complete all as specified and directed.

S&F call bell AC single pole 240 volt Musical Type complete all as specified and directed

M&L for two single core PVC insulated cable with 4 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit of suitable size not less than 20mm complete all as specified and directed

M&L for two single core PVC insulated cable with 6 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit of suitable size not less than 20mm complete all as specified and directed. (Note for item No 111 & 112 :- the unit rate quoted shall inclusive of 3 runs of calbe and one run of PVC Conduit)

B.S.S.ENTERPRISES

Gaurav Enterprises

M/S KAUSHIK CONSTRUCTION

M/S Reliance Construction

M/S S S A ASSOCIATES

m/s raghubar dayal

rajan construction