INTERIOR FURNISHING, FURNITURE, RENOVATION AND INTERIOR ELECTRIFICATION WORK OF PRINCIPAL CHAMBER AND TOILET AT S.V. POLYTECHNIC COLLEGE BHOPAL (M.P.)

Amount

PRINCIPAL TABLE 2450mm x 900mm X 750mm - Providing and Fixing of HOD Table made of 18 mm comm ply finished with 1 mm thick laminate inside and outside, 35 mm thick table top all side edge binding and side cubboard with one drawer and one shutter, 600mm x 700mm x 900mm depth made in 18 mm comm ply finished with 1 mm thick laminate inside and outside, handle, telescopic channel, hardware etc. complete. Provision of Footrest and locking arrangement.

COMPUTER TABLE 1200mm x 600mm X 750mm - Providing and Fixing of COMPUTER Table made of 18 mm comm ply finished with 1 mm thick laminate inside and outside, 20 mm thick table top all side edge binding and Provision has to be made for keyboard tray, CPU stand, side cubboard with one drawer and one shutter, 400mm x 700mm x 500mm depth made in 18mm comm ply finished with 1 mm thick laminate inside and outside, handle, telescopic channel, lock, hardware etc. complete.

HOD REVOLVING MEDIUM BACK CHAIR - The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric and moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 47.0cm(H).The armrests should made of black integral skin polyurethane with 40-55 shore hardness and reinforced with M.S insert .The mechanism of the chair shall have following features : 360⁰ revolving type, Synchro single position mechanism, Tilt tension adjustment . The chair shall be provided with pneumatic height adjustmentwhich shall have stroke of 12 cm. The pedestial shall be injection moulded in black glass-filled Nylon. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centre-dia (70 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 70cm, Depth of Chair - 70 cm as measured from pedestal below. Height from ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA X7.1standards

FILLING STORAGE 600MM DEPTH - Providing and Fixing of storage made of 18 mm comm ply and finished with 1.00 mm thick laminate inside and outside. Internally the storage shall have intermediate shelf and drawer made of 18 mm comm ply and finished with 0.8mm thick laminate. handle, telescopic channel, hardware etc. complete. Including locking arrangement.

FILLING STORAGE 400MM DEPTH - Providing and Fixing of storage made of 18 mm comm ply and finished with 1.00 mm thick laminate inside and outside. Internally the storage shall have intermediate shelf and drawer made of 18 mm comm ply and finished with 0.8mm thick laminate. handle, telescopic channel, hardware etc. complete. Including locking arrangement.

COMPUTER REVOLVING LOW BACK CHAIR - The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric and moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 40.0cm(H).The armrests should made of black integral skin polyurethane with 40-55 shore hardness and reinforced with M.S insert .The mechanism of the chair shall have following features : 360⁰ revolving type, Synchro single position mechanism, Tilt tension adjustment . The chair shall be provided with pneumatic height adjustmentwhich shall have stroke of 12 cm. The pedestial shall be injection moulded in black glass-filled Nylon. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centre-dia (70 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 60cm, Depth of Chair - 60 cm as measured from pedestal below. Height from ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA X7.1standards

VISITOR CHAIR - Providing And Placing of VISITOR CHAIR FIXED : The chair should be of size 60.9 (W) x 64.3 (D) 99.5cm cushioned seat is to be made of injection molded plastic outer & inner. Plastic inner shall be upholstered with leatherette and moulded high resilience ( H R) Polyurethane foam of density 45+/-2kg/m compression. Seat Size should be 47.0 cm(W) x 48.0cm (D).The cushioned back is to be made of PU Foam with insitu molded MS E.R.WRound Tube of size 1.9+/-0.03cm x 0.16+/-0.0128cm. duely upholstered with leatherette. Mechanism - the tubular frame shall be cantilever type & made up of 02.54+/-0.03cm x 0.2+/-0.016cm thk S.S 202 tube. The back connect to frame through powder coated (DFT 40 -60 microns) high pressure die cast connector piece.

FULLY COVERED SOFA WITH ARMS - Providing and fixing in position fully upholstered sofa made with 18mm BWP ply and B grade teak wood frame. flat spring below foam at seat, stitching, slopes color, hemming with seat of 80mm thick softy foam and reckon filler, 100mm 40 density foam on back and arm with 40mm thick high density foam, seat and back covered with best quality markeen, and finished in fabric (of not less than Rs 1000 per mtr) of approved colour, texture and quality including teak wood molding / frame sofa to be made in each seater with 100mm arms, seat size 500x550mm over all depth 700mm. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge

CORNER TABLE 480mm x 485mm x 400mm - Providing and placing corner table as per drawing made of 18MM BWP ply finished with 1.0mm laminate of approved shade. The top covered with 12mm. thick glass with polished and beveled edges fitted with 3" stainless steel studs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge

ROLLER BLINDS - Providing and fixing roller blinds Vista/Marvel make and shade with hanging and drawing system including all hardware and fixing complete. Note:- The Bidder Shall quote his own rates for item rates.(item 01 to 10)

Bidder Name

Amount

HIMALAYA TRADERS(GSTN-23ACVPC8587H1Z2)

Ansh enterprises(GSTN-NA)

Ansh enterprises

Ansh enterprises