Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.8 LAccepted-AOC C O ADNEEDS ENTERPRISES TIRAPGATE TIRAPGATE LEKHAPANI TINSUKIA ASSAM 786182 UDYAM AS 26 0000077 | TINSUKIA | ASSAM | 786182 | L1 | Accepted-AOC DUE TO L1 RATE | |
| 2 | L2₹16.7 L+₹1.9 L (13.0%)Rejected-Finance MILLONALLY LANE 3 POST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance DUE TO HIGH RATE | |
| 3 | L3₹17.0 L+₹2.2 L (14.8%)Rejected-Finance AT MAIN ROAD DANDAI PO PS DANDAI DIST GARHWA | LATEHAR | JHARKHAND | 822112 | L3 | Rejected-Finance DUE TO HIGH RATE |
Tender Value
₹14.6 L
EMD Value
₹29,200
Closing Date
7 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lekhapani
Tinsukia, Assam
PROVN OF COVERED VEH REPAIR SHED AT 303 FD WKSP COY EME AT LEKHAPANI MIL STN
2022_MES_532757_5
8666/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE Lekhapani
class E cat a(i)
4 documents required · 4 mandatory
₹500
GE Lekhapani
₹29,200
Yes
22 Dec 2022
15 Nov 2022
12 Dec 2022
15 Nov 2022
7 Dec 2022
23 Nov 2022
Amount
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation getting out in soft loose soil complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Returning, filling in excavated approved soil,(soft/loose soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.
Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing debris to the premises complete all as specified and directed.
M&L PCC (1:4:8), type D-2, (using 40 mm graded stone aggregate) as in foundations, filling, mass concrete etc complete all as specified and directed.
M&L Providing RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in foundations, footings,complete all as specified and directed.
M&L Providing RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in columns, pillars, posts and struts complete all as specified and directed.
Use and waste of form work to sides of concrete foundations, footings, bases of columns, sides and soffits of foundation and plinth beams and similar work for rough finished flat surfaces of concrete complete all as specified and directed.
Use and waste of form work to sides of square or rectangular columns, pillars, posts and struts for rough finished surfaces of concrete complete all as specified and directed.
M&L Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
All as per Item No.11 above,but TMT bars 5 to 10mm dia in stirrups, spacers and binders, complete all as specified and directed.
S&F for Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-310 complete all as specified and directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (GdeE- 250) quality A,complete all as specified and directed.
S & F Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm and nexc 10 cm diameter of neck 16 mm complete all as specified and directed
M&L Pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L Hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
M&L Preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
Rolling and consolidating formation surfaces in cutting with power roller exceeding 8 tonne and n exc 12 tonne complete all as specified and directed.
M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface with and including 8 to 12 tonne power roller complete all as specified and directed.
M&L PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and as directed.
M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L Factory made chamfered edge cement concrete paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by Eng-in-charge. Note:-Sand bed shall be measured and paid separately
M&L Factory made chamfered edge cement concrete coloured paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by Eng-in-charge. Note:-Sand bed shall be measured and paid separately
M&L for Providing PCC (1:2:4) type B-1, (using 20mm graded stone aggegate) as in copings including necessary form work complete all as specified and directed.
S&F Mild steel work in square/rectangular hollow section including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 4923 grade YST 310 complete all as specified and directed.
M/S D R GOPE
ms singh construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .