Renovation of Manipur Pollution Control Board Lamphelpat

Amount

Repairing of Main Building

Dismantling old plaster or skirting raking out & cleaning the surface for re-plaster i/c disposal of rubbish within 50 metres.

Dismantling doors, windows and clerestory windows ventilators etc.(wood or steel) shutters including choukhats, architraves, holdfasts and other attachment etc. complete and stacking them within 50 m lead. (a) Not exceeding 3 sqm in area.

Dismantling sheet roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of unserviceable materials within 50 m lead. (a) G.I. sheet roofing

Dismantling wood work wrought framed and fixed in frames, other frames and trusses of span up to 10 m and height between ridge and floor level upto 5 m including stacking the materials within 50m lead. Sectional area under 40 sq.cm.

Dismantling cement asbestos celotex/hard board in ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead (frame work such as joists beams to be measured and paid separately).

Demolition below G.L.upto 1m depth and disposal of unserviceable materials within 50 m lead. (a) Unreinforced cement concrete upto 15 cm thickness.

12 mm cement plaster 1:3 (1 cement : 3 course sand)

P/L cement concrete in foundation and plinth excluding the cost centering and shuttering in 1: 4: 8 ( 1 cement : 4 course sand : 8 graded stone aggregate 20 mm. nominal size)

White glazed tiles 10 mm. thick in flooring, treads of steps, & landing laid on a bed of 12 mm. thick cement mortar 1:3 (1 cement: 3 course sand) finished with flush pointing in white cement.

White glazed tiles 10 mm. thick in skirting, risers of steps, & dado on a bed of 12 mm. thick cement mortar 1:3 (1 cement: 3 course sand) and jointed with white cement slurry.

Providing and laying 22 mm thick precast cement concrete chequered tiles on footpath over 20 mm thick bed of cement mortar 1:3 complete as per drawing and technical specifications.

Providing wood work in frames of false ceiling, partition etc. sawn & put in position. a) Leihao wood.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre with 25 mm long dry wall screws @ 230 mm intervwal, including fixing of gypsum board to Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-tapered and backed by acoustical tissue with NRC value not less than 0.60.charge and as per manufacturer's specification, with all 4 side

P/F 38 mm. thick paneled, glazed or paneled and glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (with ordinary type) with necessary screws. (a) Leihao/Tolhao Wood

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of cement primer of approved quality on wall face.

Finishing walls with Wheathershield paint of approved quality on new work (three or more coats) to give an even shade.

Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an even shade.

Trapzoidal Pre-painted Profile sheet roofing of approved brand DYNA Roof or equivalent with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, excluding the cost of purlins & trusses. Pre painted Galvanised Sheet (PPGL) (i) Profile sheet 0.50 mm/4.2 kgs/sqm

Trapzoidal Pre-painted Profile sheet for Ridges, Gutter or Valley 610mm wide of approved brand DYNA Roof or equivalent with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, excluding the cost of purlins & trusses. Pre painted Galvanised Sheet (PPGL) (i) Profile sheet 0.50 mm/4.2 kgs/sqm

Providing and fixing 20 mm. thick plank as eave board with II). Tolhao / Uchan wood.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Painting two coats (excluding priming coat) with chocolate, red, grey of buff paint approved quality on new steel or wood work.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600 x 20 mm C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type )

Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing aluminium works for doors windows, Ventilators and partions woth extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fiixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up gaps at junctions, at top, bottom and side with required EPDM rubber/Neoprene gasket etc. Aluminium snap beading for glazing /panelling, C.P. brass/ Stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge.(Glazing and panelling to be paid for separately): Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness

Raising of Ground Level

P/L cement concrete in foundation and plinth excluding the cost centering and shuttering in 1: 4: 8 ( 1 cement : 4 course sand : 8 graded stone aggregate 40 mm. nominal size)

P/L cement concrete in foundation and plinth excluding the cost centering and shuttering in 1: 2: 4 ( 1 cement : 2 course sand : 4 graded stone aggregate 20 mm. nominal size.

Phaomei Adim