Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹28.4 L+₹19,005 (0.67%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹29.9 L+₹1.7 L (6.12%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹30.0 L+₹1.8 L (6.29%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹32.2 L+₹4.0 L (14.2%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹42.5 L
EMD Value
₹85,000
Closing Date
14 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-04/2022-2023 REPAIR AND MAINT OF BLDGS OF 16 ENGR REGT AND 207 FD REGT UNDER AGE B/R II AT CHANDIMANDIR
2022_MES_518425_1
GE/CHM-04/2022-2023
Open Tender
Civil Works - Canal
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹85,000
Yes
23 Jun 2022
16 Apr 2022
21 May 2022
16 Apr 2022
14 May 2022
30 Apr 2022
60 days
Amount
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.
15mm thick rendering cement plaster in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements complete all as specified and directed
Rendering 15mm thick plaster in cement mortar 1:4 mixed with WPC on fair faces of brick wall or on concrete surfaces and finishing the surface even and smooth without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed. Note : WPC will be measured and paid separately.
10mm thick rendering plaster in Cement and Sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces) finished even and smooth without using extra cement, and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed.
Demolition of Brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified & directed by Engineer-in-charge.
Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.
Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius, in half brick thick walls built in cement mortar 1:4, complete all as specified & directed.
Glazed ceramic coloured tiles of size 350mmx450mmx7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in cement mortar 1:4 including dismantling of old tile complete all as specified and directed.
Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 including dismantling of old tile complete all as specified and directed.
Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 including dismantling of old tile complete all as specified and directed.
Coloured vitrified ceramic tiles light shade 10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, on vertical surfaces as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 including dismantling of old tile complete all as specified and directed.
All as per serial item No 11 herein before but on skirting etc over and including 10mm thick rendering in cement mortar 1:4
Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar complete all as specified and directed.
18mm to 25mm thick granite stone slabs, width and length as ordered, best quality machine cut and granite polished to be fixed on kitchen platform, steps, pillars, floors etc and jointed with grey cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing, over and including screed bed 15mm thick in cement mortar 1:6 and rounding off/bull nosing exposed edges and making holes for gas pipes etc including dismantling of old stone slabs complete all as specified and directed.
Kota Stone Slab flooring, 18 to 22mm thick, best quality over and including cement screed bed 15mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including cutting, rubbing, grinding and polishing (Mirror finish) complete all as specified and directed.
All as per serial item No 15 hereinbefore but on skirting / vertical surfaces laid over and including 10mm screed layer in cement mortar 1:3, cutting, rubbing, grinding and polishing complete, all as specified.
Factory made vitrified chequered tiles (Paver tile) 300mm x 300mm x 10mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, 15mm thick screed bed in cement mortar 1:6, including dismantling of old tile complete all as specified and directed.
Concrete interlocking paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, including dismantling of old paver block of any desription complete all as specified and directed
Concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, including dismantling of old paver block of any description complete all as specified and directed
Demolition of cement concrete unreinforced in ground floors, and pavings not exceeding 15cm thickness (below or above ground level) all as specified & directed by Engineer-in-charge.
75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed.
50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight all as specified & directed by Engineer-in-charge.
Taking down chowkhats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.
Taking down chowkhats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge.
Taking down shutters of any description exceeding 1.00Sqm but not exceeding 2.00Sqm each complete all as specified & directed by Engineer-in-charge.
30mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides all as specified & directed by Engineer-in-charge.
Glazed and gauged skelton shutter (Factory made) 30mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design ,solid PVC foam with homogenous fine cellular structure density 750 having smooth outer integral skin, supplying & fixing in frame at site complete all as specified and directed.
Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling of PCC 1:3:6 in hollow frame, complete all as specified and directed.
Solid PVC frame (Single Rebated) of size 75mm x 50mm made out of solid PVC foam with homogenous fine cellular structure density 550 having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.
Stainless steel butt hinges medium weight 100mm long, all as specified.
200mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.
150mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.
125 mm size aluminium handle (ISI Marked), cast type, anodised complete all as specified & directed by Engineer-in-charge.
150mm size aluminium handle (ISI Marked), cast type, anodised complete all as specified & directed by Engineer-in-charge.
Mild steel sliding door bolt 250mm long, clip and bolt type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate including necessary welding, fixed as in repair complete all as specified and directed.
Factory made solid PVC board 16-18mm thick, interior grade , shutter of any colour as in cupboard shutter, shelf, sag free, thermal and electricity insulated, light weight, wrap free , impact resistant, fire resistant, termite resistant, chemical resistant and smell free including taking down old shutter complete all as specified and directed. MAKE : ECOCELL/ RAJSHREE/ SINTEX
Continuous (piano) hinges,mild steel, bright finish or electrogalvanised,width of flaps (when open) 40mm, all as specified.
40mm dia, cupboard knobs of brass fixed with nut, screw and washer of mild steel, bright finished, complete all as specified.
Magnetic catcher or ball catcher with 8mm dia steel ball and brass body and striking plate including letting in, fixed as in repair complete all as specified and directed.
Hacking out old broken glass ( any thickness) size quality etc from metal frames fixed with pin, beading or oil putty complete all as specified and directed.
3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square exc 0.5 Sqm in each panes complete all as specified and directed.
3mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with tinned tacks or stainless steel wire staples complete all as specified & directed.
Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with tinned tacks or stainless steel wire staples fixed as in repair complete all as specified & directed.
Framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.
Steel window, box type, in repair primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 03Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.
All as per serial item No 48 hereinbefore but without glazing bar.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer-in-charge.
Mild steel framed work as in doors or gates etc of angles or other sections with gusset plates complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with including hooks and hinges (excluding of covering steel sheeting) fastening, locking arrangement, etc conforming to Fe-410-O or Fe-310-O and fixed at site, completeall as specified and directed.
Material and labour rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.290.Gde-E-165,complete all as specified and directed.
Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified & directed by Engineer-in-charge.
Pre-painted galvalume aluminium zinc coating AZ-70 GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.
Pre-painted galvalume aluminum zinc coating AZ-70 GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing(length and girth as fixed), fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.
Non asbestos fiber cement False ceiling board of size 595mm x 595mm x 4mm fixed on pre coated GI Everest main runner 38mm x 24mm cross tee 29mmx 24mm and wall angle 24mm x 24mm and suspended with 4mm dia GI wire including clips as in patterns as approved by GE, in panels of size 600mm x 600mm fixed in ceiling with necessary fittings and fixtures as per manufactures instructions, in repair complete all as specified and directed. MAKE : Everest or equivalent make as approved
Dismantling of wall lining and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified & directed by Engineer-in-charge.
Supply and fixing for solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.
PVC sheet fillet 35mm wide, 5mm thick for wall paneling, complete all as specified and directed.
Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint, over a coat of primer complete all as specified and directed.
Three coats of white washing on new plastered or un-plastered surfaces of walls including preparation of complete all as specified and directed.
Three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified and directed.
Two coats of white washing on old ceiling surfaces including preparation of celing surfaces complete all as specified and directed.
Two coats of white wash on wall surfaces including preparation of old decorated surfaces complete all as specified and directed
Preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
Two coats of synthetic enamel paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide primer including preparation of new surfaces complete all as specified & directed.
Preparation of old painted steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified & directed by Engineer-in-charge.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of Chalk whiting on plastered surfaces, preparatory to distempering complete, all as specified.
Viterous china bowl urinal flat back, size of 465 x 355 x 265mm white (Minimum) with grating and union for discharge pipe including providing & fixing plugs, waste pipe , bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixed as in repair complete all as specified & directed by Engineer-in-charge.
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, fixed in repair complete all as specified & directed.
Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed.
Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes fixed in repair, complete all as specified and directed.
Vitreous china, wash down water closet pan, Pedestal pattern coloured with ‘P’ or ‘S’ trap in and, including PVC flushing cistern 10 ltrs capacity with seat cover, complete set, fixed in repair complete all as specified and directed.
Supply and fix vitreous china, pedestal type one piece compoite closet type, pastel colour including seat cover complete all as specified and directed. MAKE : HINDWARE Cat Part No 92088(Element), Colour : Pastel or equivalent in CERA / PARRYWARE
Plastic water closet seat cover, white closed pattern with flat bottom with mild steel chromium plated or aluminium hinging device, fixed as in repair complete all as specified and directed.
Chromium plated pressure jet for western type water closet with PVC connections 600 to 900mm long including brass head screw and suitable washer, fixed as in repair complete all as specified & directed
Central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.
Wall Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed
Stop valve, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed.
Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) for 15mm bore pipe fixed as in repairs complete all as specified and directed.
Bib taps brass, fancy type, with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed.
Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms), fixed as in repairs complete all as specified and directed.
110mm bore PVC (SWR) bends any radius, fixed as in repair complete all as specified and directed
PVC (SWR) pipe, 110mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, fixed as in repair complete all as specified and directed.
75mm bore PVC (SWR) bends any radius, fixed as in repair complete all as specified and directed
PVC (SWR) pipe, 75mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, fixed as in repair complete all as specified and directed.
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 15mm bore PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 15mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
Cleaning and removing all scale and dirt etc from overhead water storage tanks of capacity exc 500 but n.exc 1000 litres and from mouths of circulating pipes etc complete all as specified and directed.
Factory made RCC M-35 man hole covers of size 600mm x 1200mm x 75mm with plain faces, including MS frame, set in position fixed as in repair complete all as specified and directed.
Factory made RCC M-35man hole covers of size 600mm x 750mm x 75mm with plain faces, including MS frame, set in position fixed as in repair complete all as specified and directed.
20mm bore ball valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210gms) fixed in repair, complete all as specified and directed.
Vitreous china wash basin white, flat back of size 550 x 400 mm white including, pillar tap waste fittings, brass chromium plated coupling, brackets including cutting for and pinning in ends of brackets errect stand, fixing waste pipe fixed as in repair complete all as specified & directed by Engineer-in-charge.
Taking up or down 15mm bore steel tubing with all standard fittings or connections, from wall/ceiling/floor etc., including removal from site to store/for re-use or for credit, complete all as specified and directed.
All as per item No. 97 hereinbefore but for 20mm bore
Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed.
Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed.
Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) or PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth, and removal of rubbish outside MoD land, complete all as specified and directed.
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.
Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.
PCC 1:2:4 type B-0 (using 12.5m graded crushed stone aggregate) , as in padding over roof, mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (water proofing compound to be measured and paid separately)
75mm thick plain cement concrete 1:2:4 Type B-1 using 20mm graded aggregrate mixed with WPC @ 3% by weight of cement in sub base for floor tiles complete all as specified and directed. Note :- WPC will be measured & paid separately as supply only).
Material and labour rendering 15mm thick plaster in cement mortar 1:3 mixed with WPC on concrete of subken and finishing the surface even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).
3mm thick Atactic polypropylene polymer (APP) water proofing treatment in sunken portion of toilets with torch application over a coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm complete all as specified and directed.
Plain cement concrete 1:5:10, nominal mix, type E-2 using 40 mm graded stone aggregate as in sunken, foundation, filling and mass concrete, all as specified & directed.
Plain cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate as in coping, roof kerbs or mud stops rounded or chamfered on edges, including all necessary form work complete all as specified & directed.
Supply only Integral waterproofing compound, all as specified.
Material and labour wire brushing and cleaning top surface, terracing or cement concrete, includng flashings and junction of parapets etc including 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid over a coat of oil boubd bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc having 75mm side lap joint and 100m end lap joint after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying two coats of bituminous aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.
Drapery curtain rod, chromium plasted, with fancy brackets and fixing brackets, stops, rollers etc, fixed in repair complete all as specified
Powder coated aluminum frame/ chowkhat for doors, windows, ventilators, partition etc inclduing joining cleats, glazing clips, rubber neoprene beadings, handles, hinges , screws etc standard anodized aluminum section, powder coating not less than 50 micron, complete all as specified and directed Note : (i) weight of aluminium section and beading shal be measurd and paid separtely. (ii) Aluminium doors/ window/ventilatiors to be fixed to jambs with cadmium plate scew. (iii) The rate shall be inclusive of rubber neoprene beadings, handles, hinges , screws etc weight of fitting/ fixtures will be measured for arriving the weight of aluminium section (iii) Glass panes & panel shall be mearued & paid separately under respetive items as supply only
Supply only 5.5mm thick tinted sheet glass fixed to aluminum frame work with standard anodized aluminum snap beading, rubber packing, aluminum screws etc in panels exc 0.5 Square metre in each pane, complete all as specified & directed.
Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed in repairs, complete all as specified and directed.
CHADHA ENGINEERS
MS R G ENTERPRISES
MS GURENDER SINGH
sham enterprises
dhiraaj construction company
m/s AR Construction co
Sanjeev Sehgal Contractor
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .