PROVISION OF DRAIN WITH HARDSTANDING (APPROX 300RM) AT A VEH GARAGES OF 44 ARMD REGT AT NAMS

Amount

Excavating in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil all as per specified and directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out all as per specified and directed

Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm all as per specified and directed

Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point all as per specified and directed

M&L for brick work with sub class ‘B’, old size, bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:4) all as specified and directed

M&L for brick work with sub class ‘B’, old size,in half brick thick built in cement mortar ( 1:4) all as per specified and directed

M&L for hardcore of broken stone aggregate gauge not exc 63 mm depopsited,spread and levelled in layers n exc 15cm thick watered and rammed complete all as specified and directed.

M&L for PCC (1:4:8, C2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete all as specified and directed.

M&L 100mm thick PCC 1:2:4 type B1 (using 40 mm graded stonr aggregete)as in sub base of hardstanding etc etc all as specified and directed.

M&L PCC 1:2:4 type B2 (using 40 mm graded stonr aggregete)as in coping,benching etc all as specified and directed.

M&L for providing Plain Cement Concrete (1:3:6) type C2 using 40mm graded stone aggregate as in surface channel and drain and sub base for hardstanding all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete using extra cement including forms, moulds end etc all as specified and directed.

M&L for 15 mm thick rendering on external surface with cement mortar (1:4) on fair face of brick or concrete surface finished even and fair (with out using extra cement) complete all as specified and directed..

M&L for stone sett flooring with stone settsof size 200 to 250mm long 150to 200mm wide an 150mm deep and side dressed bedded in cement motar 1:3 joint 20mm thick grouted in cement motar 1:2 with an admixture of matalic floor hardner 5% 0f weight of cement and stuck flush i complete all as specified anad directed.

M&L for Nominal RCC (1:2:4) type B1(using 20 mm graded stone aggregate). As in sub base, slab, side wall of fdn wall, coping base of drain gratings col etc and the like complete complete all as specified and directed

S&F mild steel TMT bars 10 mm dia and over cut to length bend to shape rtequired including cranking binding spirally for hooping for columns hooking and binding with and including mild steel wire(anneled not less than 0.9 mm dia or securing with clips quility conforming to Fe -410 S or Fe 410-0 all as specified and directed.

M&L MS framed work such as grills, gratings with ends of bars shouldered and or rivated or forged into spikes, framed guard bars and similar work confirming to Fe 410 or Fe 310-0 in repairs all as specified and directed.

M&L for Reinforced concrete pipes 300 mm dia class NP3 laid and jointed compleate with collers all as per specified and directed

Material and labour for PCC (1:3:6) type C2 using 40 mm graded aggregate bed to drain pipe for 300 mm bore including packing under and hunching against side of pipe after they are laid and tested all as specified and directed.

M&L for preparation of new and previously un-treated steel and iron surfaces of any description, not otherwise described exc 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed.

M&L For fixing only of stone sett flooring with stone settsof size 200 to 250mm long 150to 200mm wide an 150mm deep and side dressed bedded in cement motar 1:3 joint 20mm thick grouted in cement motar 1:2 with an admixture of matalic floor hardner 5% 0f weight of cement and stuck flush incld dismantling of old stone flooring with sub base coarse and cleaning of stone from mortar for reuse complete all as specified anad directed.

M&L For stone sett flooring with stone settsof size 200 to 250mm long 150to 200mm wide an 150mm deep and side dressed bedded in cement motar 1:3 joint 20mm thick grouted in cement motar 1:2 with an admixture of matalic floor hardner 5% 0f weight of cement and stuck flush incld dismantling of old stone flooring with sub base coarse and cleaning of stone from mortar for reuse complete all as specified anad directed.

M & L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of chalk whitening primer complete all as specified and as directed by Engr-in-Charge. (Make Acrocem/Snowcem and equivalent)

M&L for 50mm thickness plain cement concrete in 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection joint filled with bitumen sand mixer all as specified and directed.

S&F steel tubes medium grade galvanisedwith all fittings and fixed complete to wallsand ceiling or laid in floor bore of pipe 15mmdia including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4 all as specified and directed.

Description all as per item No 25.00 hereinbefore but 20mm dia.

S&F in repairs for 15mm dia of pipe bib taps, cast copper alloy fancy type and chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed bothends for iron pipes or for Unions and fixed all as specified and directed.

Description all as per item No 28.00 above but 20mm Dia of pipe

tarlok singh contractor

Saini Constructions

Jaspal Construction Co.

Roop Sons and Co

M/s Vijay Construction Co.