MISC REPAIRS TO COMPOUND WALL AND DRAIN AT ZONE II AREA AT JAIPUR MIL STN

Amount

Demolition of stone/bk masonry work built in cement mortar or cement lime mortar complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Walling of random rubble, uncoursed well bonded ,bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

Ditto as item 3 above but except stones.

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Ditto as item 3 above but except bricks.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonary or concrete surfaces of wall finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 thick plaster in CM 1:4 on stone masonary surfaces or other than fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 Ty C1 using 20 mm gr stone aggr as in coping complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in loose /soft soil complete all as specified and directed.

M&L 100mm thick PCC 1:3:6 Ty C2 using 20mm gr stone aggr as in surface drains /channel complete all as specified and directed.

M&L for PCC 1:2:4 Ty B1 using 20mm gr stone aggr as in surface drains /channel complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.

S&F in repair mild steel work as in grills over walls etc complete all as specified and directed.

S&F in repair mild steel work as in swan necks etc complete all as specified and directed.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured)

M&L preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for PCC 1:3:6 Type C2 as in blocks for fixing angle iron posts etc complete all as specified and directed.

M&L complete removal of existing treatment on wall surfaces and applying JK/Birla wall putty to fill micro cracks and uneven surfaces and applying two coats of weather proof exterior emulsion paint over one coat of primer complete all as specified and directed by Engineer-in Charge.

M&L preparation of new plastered wall surfaces and applying two coats of weather proof coat over one coat of primer complete all as directed by Engineer-in Charge.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over one coat of primer complete all as specified and directed by Engineer-in Charge. .

M&L Preparation of old plastered surfaces of wall and applying one coat of cement base paint complete all as spd and directed by Engr in charge.

M&L complete removal of existing treatment on wall surfaces and applying wall putty to fill micro cracks and uneven surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed by Engineer-in Charge.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and removal of same from outside MOD land complete all as specified and as directed by Engineer-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed by Engineer-in Charge.

M&L for 75 mm thick Cement concrete type B-2, 1:3:6 (40mm graded aggregate complete all as specified and directed by Engineer-in Charge.

M & L 60mm thick factory made Precast cement concrete inter locking tiles with bull nosed edge of PCC M-20 as in footpath, laid over and including 25mm thick sand cushion, joints of tiles filled with dry sand and compacted with mechanical vibrator all as spd and directed.

M&L chequered cement concrete tiles with grey cement and pigment 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry over 15mm thick screed bed in cement mortar 1:6.all as spd and directed by EIC.

M&L for Providing, cement concrete 1:2:4 type B1 using 20mm gr stone aggr in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer-in Charge.

M&L for preparation of concrete Surfaces or brick surface of any description of over 10cm girth or width and applying two coats of synthetic enamel paint over a coat of primer.

M&L for 100mm Cement concrete type B- 2, 1:2:4 (40mm graded aggregate rough finished surfaces of concrete complete all as specified and directed by Engineer-in Charge.

M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A complete all as specified and directed by Engineer-in Charge.

S&F 150mm dia Reinforced concrete pipes, class NP2, laid and jointed complete complete all as specified and directed by Engineer-in Charge.

Schedule of Credit

S.R.Enterprises

M/S Chandra Mohan Bansal

M/S JALANDRA CONSTRUCTIONS

M/s Jai Jinendra Constructions

NARAYAN SINGH NARENDRA SINGH AND COMPANY