Supply of Electrical spares and minor hardware /store items in piece meal for year 2020-21

Al. alloy as per IS: 617 of 1975 PG clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) and those stipulated in section-III of this tender document suitable for ACSR zebra conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor. Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided.

Al. alloy as per IS: 617 of 1975 T-clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) and those stipulated in section-III of this tender document suitable for ACSR zebra conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor.Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975, Bi-mettalic CT Clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for ACSR zebra conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor with CT terminals suitable for 132KV/33KV CTs of makes/AE Mumbai, SCT Gaziabad, BHEL, Vidhyut Control System Andhra, Mehru Bhiwadi/ Laxshmi Engg Bhopal, Jyoti etc Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975, Bi-mettalic Isolator pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for ACSR zebra conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor with pad terminals suitable for 132KV /33KV isolators of East land, elpro, Hivelm Calcutta, S&S,GR power, Skipper, BIMCO,Andhra mech. industries etc Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975, Bi-mettalic Breaker pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for ACSR zebra conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor with pad terminals suitable for 132KV /33KV breakers of SF 6 type-ABB,CGL, Siemens, BHEL/VCB type- S&S, GEC Alsthom, BHEL, ABB, Siemens, Megawin etc. Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975, Bi-mettalic CT pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for twin ACSR zebra conductor with conductor spacing 300mm and CT terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin zebra conductor with pad terminals suitable for 132KV /33KV CTS of AE Mumbai, SCT Gazaibad, BHEL, Vidhyut Control Andhra, Mehru bhiwadi/ Laxmi Engg Bhopal Vidhyut Control Andhra, Jyoti etc Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975, Bi-mettalic Twin isolator pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for twin ACSR zebra conductor with conductor spacing 300mm and Isolator pad clamp Terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin zebra conductor with pad terminals suitable for 132KV /33KV isolator of East land, elpro, Hivelm Calcutta, S&S,GR power, Skipper, BIMCO. Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975, Bi-mettalic Breaker pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for twin ACSR zebra conductor with conductor spacing 300mm breaker terminal spacing 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin zebra conductor with pad terminals suitable for 132KV /33KV breaker of type SF6-CGL, ABB, Siemens, BHELVCB-S&S, GEC Alstom, BHEL, ABB Siemens Megawin Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975 PG clamps conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for ACSR panther conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of Panther conductor Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975 T- clamps conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for ACSR panther conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of Panther conductor Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975 T- clamps conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for ACSR panther conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of Panther conductor Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided Al. alloy as per IS: 617 of 1975 T- clamps conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for ACSR panther conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of Panther conductor Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975, Bimetallic Isolator pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for ACSR panther conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of panther conductor with pad terminals suitable for 132/33KV isolators of East land, elpro, Hivelm Calcutta, S&S, GR power, Skipper, BIMCO. Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975, Bimetallic breaker pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for ACSR panther conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of panther conductor with pad terminals suitable for 132KV /33KV breaker of SF6 – CGL, ABB, Siemens , BHEL VCB- S&S, GEC Alstom, BHEL, ABB, Siemens, Megawin Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975, Bimetallic CT pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for twin Panther conductor with conductor spacing 300mm and CT terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor with pad terminals suitable for 132KV /33KV CTS of AE Mumbai, SCT Gaziabad, BHEL, Vidhyut Control system Andhra, Lakshmi Bhopal, Mehru Bhiwadi, Jyoti Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975, Bi-mettalic Isolator pad clamp (univercial take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for twin Panther conductor with conductor spacing 300mm and isolator terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor with pad terminals suitable for 132KV /33KV isolator of Estland, Elpr, Hivelm Calcutta, S&S, GR power, Skipper, Bimco, Andhra Mech. Ind, Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975, Bimetallic breaker pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for twin Panther conductor with conductor spacing 300mm and terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor with pad terminals suitable for 132KV/33KV breaker of SF6- CGL, ABB, Siemns BHEL VCB-S&S, GEC Alstom, BHEL, ABB Siemens, Megawin ,Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975 PG clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) and those stipulated in section-III of this tender document suitable for ACSR zebra-ACSR Panther conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor. Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975 T-clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) and those stipulated in section-III of this tender document suitable for ACSR zebra-ACSR Panther conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor. Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

P.I Clamp for ACSR Zebra conductor

P.I Clamp for ACSR Panther conductor

Single suspension hardware fitting for zebra conductor conforming to IS 2486 (Part-I) ammended upto date and the specification stipulated in sec. III of this tender document having suspension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 16mm B&S 70KN Disc insulators., ultimate tensile strength of (H/W) 7000Kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided a. Station Type b. Line Type

Single tension hardware fitting for ACSR zebra conductor conforming to IS 2486 (Part-I) ammended upto date) and the specification stipulated in sec. III of this tender document having tension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 20mm B&S 120KN Disc insulators., UTS of hardware = 900Kg UTS/Slip strength of clamp = 95% of UTS of conductor = 8550 kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided a. Station Type b. Line Type

Double suspension hardware fitting for zebra conductor conforming to IS 2486 (Part-I) ammended upto date) and the specification stipulated in sec. III of this tender document having suspension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 16mm B&S 70KN Disc insulators., UTS of hardware =7000Kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided a. Station Type b. Line Type

Double tension hardware fitting for zebra conductor conforming to IS 2486 (Part-I) ammended upto date and the specification stipulated in sec. III of this tender document having tension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 20mm B&S 120KN Disc insulators., UTS of hardware = 9000Kg UTS / Slip strength of Clamp = 95% UTS of conductor = 8550 kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided a. Station Type b. Line Type

Single tension fitting for ACSR twin Zebra conductor conforming to IS 2486 (Part-I) ammended upto date and the specification stipulated in sec. III of this tender document having tension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 20mm B&S 120KN Disc insulators., UTS of hardware = 9000Kg UTS / Slip strength of Clamp = 95% UTS of conductor = 8550 kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided a. Station Type b. Line Type

Single suspension fitting for ACSR twin Zebra conductor conforming to IS 2486 (Part-I) ammended upto date and the specification stipulated in sec. III of this tender document having tension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 20mm B&S 120KN Disc insulators., UTS of hardware = 9000Kg UTS / Slip strength of Clamp = 95% UTS of conductor = 8550 kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided a. Station Type b. Line Type

Single suspension hardware fitting for AAAC panther conductor 37/3.15mm conforming to IS 2486 (Part-I) amended upto date and the specification stipulated in sec. III of this tender document having tension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 16mm B&S 70KN Disc insulators., UTS hardware =7000Kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Single tension hardware fitting for AAAC panther conductor 37/3.15mm conforming to IS 2486 (Part-I) amended upto date) and the specification stipulated in sec. III of this tender document having tension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 20mm B&S 120KN Disc insulators., UTS hardware = 900Kg UTS/Slip strength of clamp = 95% of UTS of conductor = 8550Kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Double suspension hardware fitting for AAAC Panther conductor 37/3.15mm conforming to IS 2486 (Part-I) amended upto date) and the specification stipulated in sec. III of this tender document having tension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 16mm B&S 70KN Disc insulators., UTS of hardware = 7000Kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Double suspension hardware fitting for AAAC Panther 37/3.15mm conductor conforming to IS 2486 (Part-I) amended upto date and the specification stipulated in sec. III of this tender document having tension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 16mm B&S 70KN Disc insulators., UTS of hardware = 7000Kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Single tension fitting for ACSR twin panther conductor conforming to IS 2486 (Part-I) ammended upto date and the specification stipulated in sec. III of this tender document having tension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 20mm B&S 120KN Disc insulators., UTS of hardware = 9000Kg UTS / Slip strength of Clamp = 95% UTS of conductor = 8550 kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided a. Station Type b. Line Type

Single suspension fitting for ACSR twin panther conductor conforming to IS 2486 (Part-I) ammended upto date and the specification stipulated in sec. III of this tender document having tension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 20mm B&S 120KN Disc insulators., UTS of hardware = 9000Kg UTS / Slip strength of Clamp = 95% UTS of conductor = 8550 kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided a. Station Type b. Line Type

Compression type repair sleeve suitable for AAAC /panther of 37/3.15mm designation with body and keeper made of Aluminum Alloy for providing reinforcement of conductor with broken/damaged aluminum strands. Repair sleeve should conform to IS: 2121/1981 (with latest amendments up to date) and should present a smooth surface after compression Min failing load = 95% UTS of conductor = 7654Kg Compression pressure = 100tons for Al Electrical resistance at 20oC =75% of measured resistance of equivalent length of conductor Corona formation voltage = 110% of max line to ground voltage

Compression type repair sleeve suitable for AAAC /panther of 37/2.88mm designation with body and keeper made of Aluminum Alloy for providing reinforcement of conductor with broken/damaged aluminum strands. Repair sleeve should conform to IS: 2121/1981 (with latest amendments up to date) and should present a smooth surface after compression Min failing load = 95% UTS of conductor = 6144Kg Compression pressure = 100tons for Al Electrical resistance at 20oC =75% of measured resistance of equivalent length of conductor Corona formation voltage = 110% of max line to ground voltage

4R stock bridge type vibration damper suitable for AAAC/ panther (of 37/3.15mm designation) of approved design. The clamps and keeper of the vibration damper shall be made to Al alloy so designed as to prevent any damage to or chafting of the conductor, during erection or continued operation. Clamping bolts, washers should of mild steel/HDG provided with self locking Nuts designed to prevent corrosion of the threads. All ferrous parts including the messenger cable shall be hot dip galvanized (IS 2633). The ends of messenger cable shall be effectively sealed to prevent corrosion. Spring washers should be electro galvanized dampers mass should be of cast Iron HDG conforming to IS 9708 of 1980 Total Wt of the item shall be = 2.4Kg Slip strength = 2.5KN before fatigue test Slip strength = 2.0KN after fatigue test

4R stock bridge type vibration damper suitable for AAAC/ panther (of 37/2.88mm designation) of approved design. The clamps and keeper of the vibration damper shall be made to Al alloy so designed as to prevent any damage to or chafting of the conductor during erection or continued operation. Clamping bolts, washers should of mild steel/HDG provided with self locking Nuts designed to prevent corrosion of the threads. All ferrous parts including the messenger cable shall be hot dip galvanized (IS 2633). The ends of messenger cable shall be effectively sealed to prevent corrosion. Spring washers should be electro galvanized dampers mass should be of cast Iron HDG conforming to IS 9708 of 1980 Total Wt of the item shall be = 2.4Kg Slip strength = 2.5KN before fatigue test Slip strength = 2.0KN after fatigue test

Mid span compression joint for panther/AAAC (of 37/3.15mm designation) suitable for making joints in the conductor so designed that on installation no air space is left within the finished joint. The Al sleeve used should be of extruded Al tube of purity not less than 95% while as steel sleeve should of high strength steel. i- Minimum failing load = 95% UTS of conductor (Slip strength) = 7654Kg ii-Material Outer sleeve = Extruded Al tube of 99.5 % purity Inner sleeve = High tensile steel iii- Elect Resistance at 20oC = 75% of measured resistance of equivalent length of conductor iv- Ferrous parts = Hot dip Galvanized v -Compression rate = 100Ton for AC

Mid span compression joint for panther/AAAC (of 37/2.88mm designation) suitable for making joints in the conductor so designed that on installation no air space is left within the finished joint. The Al sleeve used should be of extruded Al tube of purity not less than 95% while as steel sleeve should of high strength steel. i- Minimum failing load = 95% UTS of conductor (Slip strength) = 6411Kg ii- Material Outer sleeve = Extruded Al tube of 99.5 % purity Inner sleeve = High tensile steel iii- Elect Resistance 20oC = 75% of measured resistance of equivalent length of conductor iv Ferrous parts = Hot dip Galvanized v Compression rate = 100Ton for AC

Armour Rods Helically twisted suitable for ACSR Panther/AAAC panther to provide rigidity and protection to the conductor at all suspension parts and also to eliminate the fatigue on the conductor due to vibration and corona. Type Performed Material Al/Alalloy Purity of Al EC Grade 95.5% Corona formation 110% of Max line to ground voltage Consilic strength 35Kg/mm2 Slip strength 25% UTS of conductor Ends Ball ended Erection of lay of rods Right hand lay

Compression type repair sleeve suitable for ACSR Zebra conductor of 54/7/3.18mm designation with body and keeper made of Aluminum Alloy for providing reinforcement of conductor with broken/damaged aluminum strands. Repair sleeve should conform to IS: 2121/1981 (with latest amendments up to date) and should present a smooth surface after compression Min failing load = 95% UTS of conductor = 7654Kg Compression pressure = 100tons for Al Electrical resistance at 20oC =75% of measured resistance of equivalent length of conductor Corona formation voltage = 110% of max line to ground voltage

4R stock bridge type vibration damper suitable for ACSR Zebra (of 54/7/3.18mm designation) of approved design. The clamps and keeper of the vibration damper shall be made to Al alloy so designed as to prevent any damage to or chafting of the conductor, during erection or continued operation. Clamping bolts, washers should of mild steel/HDG provided with self locking Nuts designed to prevent corrosion of the threads. All ferrous parts including the messenger cable shall be hot dip galvanized (IS 2633). The ends of messenger cable shall be effectively sealed to prevent corrosion. Spring washers should be electro galvanized dampers mass should be of cast Iron HDG conforming to IS 9708 of 1980 Total Wt of the item shall be = 2.4Kg Slip strength = 2.5KN before fatigue test Slip strength = 2.0KN after fatigue test

Mid span compression joint for ACSR Zebra (of 54/7/3.18mm designation) suitable for making joints in the conductor so designed that on installation no air space is left within the finished joint. The Al sleeve used should be of extruded Al tube of purity not less than 95% while as steel sleeve should of high strength steel. i- Minimum failing load = 95% UTS of conductor (Slip strength) = 7654Kg ii-Material Outer sleeve = Extruded Al tube of 99.5 % purity Inner sleeve = High tensile steel iii- Elect Resistance at 20oC = 75% of measured resistance of equivalent length of conductor iv- Ferrous parts = Hot dip Galvanized v -Compression rate = 100Ton for AC

Armour Rods Helically twisted suitable for ACSR Zebra to provide rigidity and protection to the conductor at all suspension parts and also to eliminate the fatigue on the conductor due to vibration and corona. Type Performed Material Al/Alalloy Purity of Al EC Grade 95.5% Corona formation 110% of Max line to ground voltage Consilic strength 35Kg/mm2 Slip strength 25% UTS of conductor Ends Ball ended Erection of lay of rods Right hand lay

Shunt Tripping coil 110V DC, 1A suitable for 33KV VCB of BHEL, ABB, GEC Alstom, Siemens, Mega win, S&S Make

Spring/Charging/Closing coil 110V, 1A DC suitable for 33KV VCB of BHEL, ABB, GEC Alstom, Siemens, Mega win, S&S Make

Male contact of 33KV BOCB of BHEL Make

Female contact of 33KV BOCB of BHEL Make

33KV Vacuum Interrupter suitable for 33KV VCB of BHEL, ABB, GEC Alstom, Siemens, Mega win, S&S Make

SF-6 gas Cylinder of 9Kg

Arcing chamber with female contact for 33KV BOCB BHEL Make

Arcing chamber without female contact for 33KV BOCB BHEL, ABB, GEC Alstom, Siemens, Mega win, S&S Make

Thermal overload relay “Siemens Make” with range 0.8-1.2Amp

Thermal overload relay “Siemens Make” of 4A Max with range 0.8-1Amp and 1.5A-1.2A

MN2 Thermal overload relay with start and off/reset relay of range 0.9-1.5A L&T make

Auxiliary air break contactor of AC2/ AC 3 duty cycle Number of poles 3No. Voltage 415V Amp 0-2A Contacts 2NO +2NC Make Siemens

Magnetic control contactor Make Andrew Yule Power 44W Volt 110V DC Ith 10A IS 13947 IEC 947

Thermal overload relay “Siemens Make” of 4A Max with range 0.8-1Amp and 1.5A-1.2A

Isolator Jaws suitable for 33KV isolator makes Eastland, Elpro, Hivelem Calcutta, S&S, GR Power, skipper, BIMCO

Digital OTI 90-250V AC/DC, range 0-150oC make Precimeasure control Banglore

Digital WTI meter make Precimeasure control Banglore

HRC fuse 2,4,6,10Amps

Indicating Pygmy Lamp 110V DC, pin type / screw type

10A 110V AC/DC multi-colour LED indicators lamps

110Volt DC Alarm Buzzer suitable for C&R panel

Numerical master tripping relay Make Easun Reyrolle Model B- 24 Poles 1No Volt 110V DC Amp 1A Numerical master tripping relay Make Easun Reyrolle Model B- 24 Poles 1No Volt 110V DC Amp 1A

Numerical master tripping relay Make Easun Reyrolle Model B- 86 Poles 1No Volt 110V DC Amp 1A

Numerical O/C and E/F relay Make Easun Reyrolle Model MIT 114 Poles 4Nos Volt 43- 280V DC Amp 1A

33KV voltage grade, 3 phase, 4 wire digital trivector energy meter Volt 33KV/√3/11V/√3 Frequency 50HZ Rating -/1A Accuracy class 0.5S Standard IS 14697 IEC 62053-22

132KV voltage grade, 3 phase, 4 wire digital trivector energy meter Volt 132KV/√3/11V/√3 Frequency 50HZ Rating -/1A Accuracy class 0.5S Standard IS 14697 IEC 62053-22

LT whole current Trivector Meter 3x240 volt, 50HZ 3 phase 4 wire 10-10Amp (Secure Make)

2 pole heavy duty rotary switch with “OFF” 5Amp make “Key Cee” equivalent etc for C&R panel

Auxiliary contactor switch for 33KV VCB of different Makes BHEL, ABB, Siemens, Megawin,. S&S, GEC Alsthom.

Semaphore indicators for Isolators & earth switches

MISCELLINIOUS ITEMS

Single core 300Sq mm 33KV heat shrinkable cable kit outdoor type Likely make M seal, Powertech, H- seal, universal etc

Single core 300Sq mm 33KV heat shrinkable cable kit indoor type Likely make M seal, Powertech, H- seal, universal etc

Single core 630Sq mm 33KV heat shrinkable cable kit outdoor type Likely make M seal, Powertech, H- seal, universal etc

Single core 630Sq mm 33KV heat shrinkable cable kit indoor type Likely make M seal, Powertech, H- seal, universal etc

Single core 630Sq mm 33KV voltage grade, Al. conductor, PVC Insulated, Sheathed, Armoured, XLPE Cable Likely make Havells etc

Shunt capacitor fuse 40A with spring complete assembly

Transformer oil IS 335 of 1993

Silcagel crystal size 8- 8 mesh

GI nuts and bolts of sorts (16mmx35mm/ 40mm/45mm/50mm & 65mm) heavy duty as per sample

GI nuts and bolts of sorts (10mmx50mm) heavy duty as per sample

GI nuts and bolts of sorts (12mmx50mm) heavy duty as per sample

Spring washers 16mm heavy duty as per sample

AL Tape

Old cotton saree

33KV Isolator without earthing blade 1600Amp Isolator Clamp for Zebra

Grease

33KV Isolator with earthing blade 1600Amp Isolator Clamp for Zebra complete

DCP type Fire fighting equipment of ,10,, Kg capacity

DCP type Fire fighting equipment of 25Kg capacity

DCP type Fire fighting equipment of 50Kg capacity

ABC type Fire fighting equipment of 5, Kg capacity

ABC type Fire fighting equipment of 10 Kg capacity

12 Volt, 150/200AH, 110Volt DC VRLA type cells Make HBL etc

2 Volt, 200AH, 110Volt DC LMLA type cells Make IS etc

Welding electrodes SWG 8No as per IS: 814 of 2004

Welding electrodes SWG 10No as per IS: 814 of 2004

G. I wire SWG No. 8/ 4.06mm dia

Galvanized steel earth wire conforming to ACSR core wire as per IS; 398 (II)- 1976 a. Stranding & wire dia 7/3.66mm b. No. of strands Steel Core 1 Outer Steel Layer 6

LED Lamp 12 watt (Philips, Havells, Crompton, Bajaj Make)

LED Lamp 20 watt (Philips, Havells, Crompton, Bajaj Make)

LED Lamp 45 watt (Philips, Havells, Crompton, Bajaj Make)

LED Lamp 30 watt (Philips, Havells, Crompton, Bajaj Make)

Search Light with 300-500Mtr. Focus make Flash, equivalent etc

LED Street light fitting 40/45 watt (Philips, Syska, Havells, Crompton, Bajaj Make)

LED Street light fitting 60/70 watt (Philips, Syska, Havells, Crompton, Bajaj Make)

LED Street light fitting 90/100 watt (Philips, Syska, Havells, Crompton, Bajaj Make)

Single core 300Sq mm 33KV heat shrinkable cable kit outdoor type Likely make Raychem Make

Single core 300Sq mm 33KV heat shrinkable cable kit indoor type Likely make Raychem Make

Twin Bush Clamp for Moose

MCB 16-32 Amp (Havells, Standard, HPL)

MCCB 100 Amp, 4 pole, ICS= 100% ICU (Havells, Standard, L&T)

MCCB 200 Amp, 4 pole, ICS= 100% ICU (Havells, Standard, L&T)

Rubber mat 1mtr x2mtr= 12mm thick

Spacer suitable for ACSR Zebra conductor with conductor spacing of 300mm Make ZI or equivalent

100Amp four pole change over switch of HPL Make

1.1KV Voltage Grade 20mm2 single core copper conductor PVC insulated industrial cable conforming to IS: 1554-1998

1.1KV Voltage Grade 2.5mm2 2 core Copper conductor, PVC Insulated control cable conforming to IS: 1554-1998

1.1KV Voltage Grade 2.5mm2 4 core Copper conductor, PVC Insulated control cable conforming to IS: 1554-1998

1.1KV Voltage Grade 2.5mm2 6 core Copper conductor, PVC Insulated control cable conforming to IS: 1554-1998

1.1KV Voltage Grade 2.5mm2 8 core Copper conductor, PVC Insulated control cable conforming to IS: 1554-1998

1.1KV Voltage Grade 2.5mm2 12 core Copper conductor, PVC Insulated control cable conforming to IS: 1554-1998

1.1KV Voltage Grade 2.5mm2 16 core Copper conductor, PVC Insulated control cable conforming to IS: 1554-1998

1.1KV Voltage Grade 2.5mm2 20 core Copper conductor, PVC Insulated control cable conforming to IS: 1554-1998

Cable ferrules A to Z and 0 to 9

Red Oxide Enamel Paint (Asian, Nerolac/ Berger)

Al. paint (Asian, Nerolac/ Berger)

Smoke Grey Enamel Paint

Polypropylene Rope ½’, ¾’& 1’ / Garware make

Manila rope ¾’ & 1’ dia

Steel wire rope sling 16mm dia ISI Make 2 mtr. Long heavy duty as per sample

Steel wire rope sling 16mm dia ISI Make 5 mtr. Long heavy duty as per sample

Steel wire rope sling 16mm dia ISI Make 10 mtr. Long heavy duty as per sample

Terminal testing block/ kit required for the installation of TVM.

132KV Voltage Grade Portable earthing/ discharge equipment with statie phasing rod & hotline indicators with following specifications Make Monrach Model Safety First Standard IEC-1235 for Dielectric Strength IEC- 1230 for Mech. and short ckt Strength Length of segmented 3.4mtr. Fiber glass pole Internal dia ID 33mm Outer dia OD 40mm Earthing cable 102mm single core PVC insulated copper conductor cable Length of earthing cable 10mtr. Hardware accessories Clamp holder, line and clamp,” earth end “U clamp etc

33LV LA Station type Make Oblam etc.

Automatic voltage stabilizer 6KVA single phase, 90 volt to 280 volt suitable for air conditioner of 2 tom capacity

Copper strip bus bar of EC grade 30x6mm

Disc Insulator 70KN B&S type, Anti Fog (BHEL, Rashtriya/ IEC, Jayashree Make)

Disc Insulator 70KN B&S type, without Anti Fog (HC, Top Line, RR Make)

Disc Insulator 90KN B&S type, Anti Fog (BHEL, Rashtriya/ IEC, Jayashree Make)

Disc Insulator 90KN B&S type, without Anti Fog (HC, Top Line, RR Make)

Disc Insulator 120KN B&S type, Anti Fog (BHEL, Rashtriya/ IEC, Jayashree Make)

Disc Insulator 120KN B&S type, without Anti Fog (HC, Top Line, RR Make

T&P ITEMS

Turn table for ACSR Panther/Zebra conductor with capacity of 3MT made of mild steel with double ball bearing Likely makes PEE, ZI, Honeywell, Burma etc

Four sheeve pulley steel frame forged swivel hook as per IS 8610 pulley material and ball bearing of Gun metal bush with open type pulley ISI mark suitable for 12mm steel rope

Bolted type come along clamp suitable for AAAC panther 37/3.15mm with Al alloy clamp and groove inside for conductor gripping. Hook and eye bolt of galvanized carbon steel, locking bolts made of high tensile steel IS: 2121 Tension limits = 2495Kg Likely makes PEE, ZI, Honeywell, Burma etc

Bolted type come along clamp suitable for AAAC panther 37/2.88mm with Al alloy clamp and groove inside for conductor gripping. Hook and eye bolt of galvanized carbon steel, locking bolts made of high tensile steel IS: 2121 Tension limits = 2495Kg Likely makes PEE, ZI, Honeywell, Burma etc

Bolted type comealong clamp for Earth wire size 7/3.66mm Groove according to size of Earth wire bolts of high tensile steel Likely makes PEE, ZI, Honeywell, Burma etc

Snatch Galvanized pulley size 6” dia pulley on ball bearing/Gun metal bush with swivel hook open type with side locking suitable for use in Trans Line stringing Likely makes PEE, ZI, Honeywell, Burma etc

Al Alloy snatch roller pulley size 8”dia pulley on ball bearing/Gun metal bush with swivel hook open type with side locking suitable for use in Trans Line stringing Likely makes PEE, ZI, Honeywell, Burma etc

Megger 5KV Likely make Motwani, WACO, Riken etc

Avo Meter Likely make Motwani, WACO, Riken etc

Hook on meter Likely make Motwani, WACO, Riken etc

Insulating hand gloves 33KV Make Crystal etc tested for 33KV level

12V rechargeable search light with inbuilt charger complete with Dimmer & flasher of reputed make such as VKS etc

Rain coat of duck back make etc

Gum Boot of duck back make etc

Dangari

Ring Spanner of all sizes Taparia, Jahallni, Dwellet etc

Petrolemjelly

Distilled water

Fiber Glass Sheet

Screw Gaze Digital

Veriner clipper Digital

LED Flood Light 50Watt

LED Flood Light 30Watt

LED Flood Light 40Watt

132KV LA Station type

10/A/220V/AC/DC Multi colour LED Type indicators

Al. alloy as per IS: 617 of 1975 PG clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) and those stipulated in section-III of this tender document suitable for ACSR moos having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor. Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided.

Al. alloy as per IS: 617 of 1975 T clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) and those stipulated in section-III of this tender document suitable for ACSR moos having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor. Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided.

Al. alloy as per IS: 617 of 1975 Isolator clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) and those stipulated in section-III of this tender document suitable for ACSR moos having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor. Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided.

Al. alloy as per IS: 617 of 1975 Breaker clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) and those stipulated in section-III of this tender document suitable for ACSR moos having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor. Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided.

Al. alloy as per IS: 617 of 1975, Bi-mettalic CT pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for twin ACSR Moos conductor with conductor spacing 300mm and CT terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin zebra conductor with pad terminals suitable for 132KV /33KV CTS of AE Mumbai, SCT Gazaibad, BHEL, Vidhyut Control Andhra, Mehru bhiwadi/ Laxmi Engg Bhopal Vidhyut Control Andhra, Jyoti etc Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975, Bi-mettalic Isolator pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for twin ACSR Moos conductor with conductor spacing 300mm and CT terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin zebra conductor with pad terminals suitable for 132KV /33KV CTS of AE Mumbai, SCT Gazaibad, BHEL, Vidhyut Control Andhra, Mehru bhiwadi/ Laxmi Engg Bhopal Vidhyut Control Andhra, Jyoti etc Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975 T clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) and those stipulated in section-III of this tender document suitable for ACSR moos having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor. Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided.

Al. alloy as per IS: 617 of 1975 Isolator clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) and those stipulated in section-III of this tender document suitable for ACSR moos having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor. Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided.

Al. alloy as per IS: 617 of 1975 Breaker clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) and those stipulated in section-III of this tender document suitable for ACSR moos having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor. Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided.

3Phase High Speed Industrial exhaust/cooling fan for power transformer with following specifications Make Crompton Greaves Voltage 415V Frequency 50Hz Sweep 600mm (24Inch) Speed 960 Rpm

3Phase High Speed Industrial exhaust/cooling fan for power transformer with following specifications Make Crompton Greaves Voltage 415V Frequency 50Hz Sweep 450mm (18 Inch) Speed 1400 Rpm

PVC Insulated single core cable 95mm ISI Make unarmoured

Thinner

Dewatering pump set mono block 1 phase 2HP Capacity

transformer oil testing bottle for DGA testing of oil

1.1KV Voltage grade Al Conductor PVC Insulated cable single core 120mmsq ISI Make unarmoured

safety helmat ISI Make

Digital insulation resistance tester (Magger)

Refilling of DCP Fire extinguisher of 50Kg capacity

Refilling of DCP Fire extinguisher of 25Kg capacity

Refilling of DCP Fire extinguisher of 10Kg capacity

Refilling of CO2 type Fire extinguisher of 22.5Kg capacity

Refilling of CO2 type Fire extinguisher of 22.5Kg capacity

House pipe DCP type Fire extinguisher of 10Kg capacity

House pipe DCP type Fire extinguisher of 25Kg capacity

House pipe DCP type Fire extinguisher of 50Kg capacity

House pipe of CO2 type Fire extinguisher of 22.5Kg capacity

Al. alloy as per IS: 617 of 1975, Bi-mettalic CT Clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for Twin ACSR Moose conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor with CT terminals suitable for 132KV/33KV CTs of makes/AE Mumbai, SCT Gaziabad, BHEL, Vidhyut Control System Andhra, Mehru Bhiwadi/ Laxshmi Engg Bhopal, Jyoti etc Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

Al. alloy as per IS: 617 of 1975, Bi-mettalic Breaker pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) and those stipulated in section-III of this tender document suitable for Twin ACSR Moose conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor with pad terminals suitable for 132KV /33KV breakers of SF 6 type-ABB,CGL, Siemens, BHEL/VCB type- S&S, GEC Alsthom, BHEL, ABB, Siemens, Megawin etc. Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided

P.I Clamp for ACSR Moose conductor

Single suspension hardware fitting for ACSR moose conductor conforming to IS 2486 (Part-I) ammended upto date and the specification stipulated in sec. III of this tender document having suspension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 16mm B&S 70KN Disc insulators., ultimate tensile strength of (H/W) 7000Kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided a. Station Type b. Line Type

Single tension hardware fitting for ACSR Moose conductor conforming to IS 2486 (Part-I) ammended upto date) and the specification stipulated in sec. III of this tender document having tension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 20mm B&S 120KN Disc insulators., UTS of hardware = 900Kg UTS/Slip strength of clamp = 95% of UTS of conductor = 8550 kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided a. Station Type b. Line Type

Double suspension hardware fitting for Moose conductor conforming to IS 2486 (Part-I) ammended upto date) and the specification stipulated in sec. III of this tender document having suspension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 16mm B&S 70KN Disc insulators., UTS of hardware =7000Kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided a. Station Type b. Line Type

Single tension fitting for ACSR twin Moose conductor conforming to IS 2486 (Part-I) ammended upto date and the specification stipulated in sec. III of this tender document having tension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 20mm B&S 120KN Disc insulators., UTS of hardware = 9000Kg UTS / Slip strength of Clamp = 95% UTS of conductor = 8550 kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided a. Station Type b. Line Type

Single suspension fitting for ACSR twin Moose conductor conforming to IS 2486 (Part-I) ammended upto date and the specification stipulated in sec. III of this tender document having tension clamp of Al alloy grade-A6(IS: 617-1975), ferrous parts hot dip galvanized (IS: 2633 1986 ) suitable for 20mm B&S 120KN Disc insulators., UTS of hardware = 9000Kg UTS / Slip strength of Clamp = 95% UTS of conductor = 8550 kg Likely makes: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided a. Station Type b. Line Type

Spacer suitable for ACSR Mosse conductor with conductor spacing of 300mm Make ZI or equivalent

Spacer suitable for ACSR Mosse conductor with conductor spacing of 150 mm Make ZI or equivalent

Single core 630Sq mm 33KV heat shrinkable cable kit outdoor type Likely make Raychem Make

Single core 630Sq mm 33KV heat shrinkable cable kit indoor type Likely make Raychem Make

3½ core 50mmsq Al. Conductor PVC Insulated Cable of 1.1KV Voltage grad

3½ core 95mmsq Al. Conductor PVC Insulated Cable of 1.1KV Voltage grad

3½ core 65mmsq Al. Conductor PVC Insulated Cable of 1.1KV Voltage grad

Al Cable 2 core 16mmSq

Al Cable 2 core 10mmsq

Al Cable 2 core 25mmsq

MCCB 63Amp TPN

Al Strip 75x12mmsq

copper strip 75x12mmsq

P.G Clamp Moose to zebra

T Clamp Moose to zebra

Aux. Relay 110VDC

33KV CT's 1200-600-300/1Amp.

RANKA BROTHERS

SAROCH ELECTRICALS

CHOUHAN ELECTRICAL WORK AND SUPPLIERS

MM Enterprises

LUXMI TRADING CO

SAMPARK TRADERS

M/S A S ENGINEERS

M/S A S ENGINEERS

RANKA BROTHERS

CHOUHAN ELECTRICAL WORK AND SUPPLIERS

Gulati Metal And Alloys

SAROCH ELECTRICALS

MM Enterprises

SAMPARK TRADERS