Construction of Shed at Domchanch Market Under Nagar Panchayat Domchanch

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position specific grade of reinforced cement concrete excluding the cost of centering and shuttering - All work up to plinth level :1:1.5.3(1 cement : 1.5coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specific grade of reinforced cement concrete excluding the cost of centering and shuttering - All work up to plinth level :1:1.5.3(1 cement : 1.5coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, post, and struts, etc above plinth level upto floor level five , excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5.3(1 cement : 1.5coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing Tor steel reinforcement of 10mm,12mm dia. bars as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire removal of rust, placing the rods in position (excluding carriage of bars to work site) all complete as per building specification and direction of E/I.(a) 10mm (TMT coil Fe 500) {Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

(b) 12mm (TMT coil Fe 500) {Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

Providing and laying vitrified paring / industrial tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to IS : 4457:2007 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) , jointig with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc, complete size of tile 300x300x10 mm sizes.

Centering and shuttering including strutting, propping etc. and removal of form for foundation footing , base of Column etc. for mass concrete.

centering and shuttering including strutting ,propping etc and removal of form for Lintels,beams,plinthbeams,girders,bressumers and cantilevers

Providing 12mm thick cement plaster (1:4) with clean coarse sand F.M. 1.5 including screening,curing with all leads and lifts of water,scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing two coats of Plastic emulsion Paints of approved shade and make over a coat of cement primer over new surface including preparing plaster surface by rubbing smooth with pumice stone and fine sand paper, applying putty wherever required , scaffolding-do-.

Carriage of materials by mechanical means including loading,unloading and stacking at work site (i) Cement

(ii) Sand

(iii) Chips

(v) Steel

(vi) Bricks

Labour Cess 1%

Please Enable Macros to View BoQ information