REPAIRS TO JOINERY (WOODEN/ALUMINIUM),CUPBOARDS, GUARD BARS, RAILING ETC OTM ACCN IN AREA II OF AGE B/R (CENTRAL), GE (WEST) COLABA, MUMBAI

Amount

Taking down door chowkhat with shutter (without taking off shutters from the frame) area nexc 1.5 Sqm each all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but not exc 4 Sqm each all as specified & directed.

Taking down shutters of any description area nexc 1 sqm each all as specified & directed.

Taking down shutters of any description area exc 1 sqm but nexc 2 sqm each all as specified & directed.

Refixing of shutters of any description area not exc 1 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required at site and renewal of unserviceable screws all as specified & directed.

Refixing of shutters of any description area exc 1 Sqm but not exc 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws all as specified & directed.

S&F 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints all as specified & directed.

M&L in repairs mild steel framed work such as grill, gates, guard bar, framed with welding using angle iron, square bars and round bars section including cutting, welding, revetting all as specified & directed.

S&F factory made 30 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides including 5mm thick teakwood leaping alround all as specified & directed.

S&F 2nd class hardwood factory made door, 35 mm thick, glazed and skeleton shutters, open rebated and prepated to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number, edges of framing plain chemfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a) all as specified & directed.

S&F for 2nd class hardwood glazed and skeleton window shutter 30mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etc. or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (b) all as specified & directed.

Cutting holes in brick walls built in cement or cement lime mortar for inserting hold fasts, etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 cutting exc half brick but not exc one brick all as specified & directed.

S&F mild steel bends strips, hold fast or small articles of FI or angle all as specified & directed.

S&F for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple all as specified & directed.

S&F in repairs galvanised M S Wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple all as specified & directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads all as specified & directed.

M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane all as specified & directed.

M&L for 3mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.

M&L for 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane all as specified & directed.

S&F 300mm long aluminnium alloy sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple all as specified & directed.

S&F MS butt hinges cold rolled meium weight of size 100mm all as specified & directed.

S&F MS butt hinges cold rolled meium weight of size 75 mm all as specified & directed.

M&L for Mild steel plain black sheet 1.25 mm thick in hearths; covering to door shutters; ducts, etc, cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets, fixed to wood or steel members with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, etc as required all as specified & directed.

M&L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces not exc 10 cm width or girth including preparation of surface all as specified and directed.

M&L for preparing wooden new surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified & directed.

M&L for preparing wooden old surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint all as specified & directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and shown in drg in SSR Part -II 2010 all as specified & directed.

S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS frame shall be covered with heat moulded plain cover PVC C channel having a PVC sheet strip of 20mm with struck in side with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail and either side as gap inserted for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading sheet and jointed together with solvent cement in frame at site as per specification and shown in drg in SSR Part -II 2010

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section all as specified and directed

S&F 100 mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge, pin anodized all as specified & directed.

S&F 150 mm long aluminium alloy handle cast type anodized all as specified & directed.

M&L in repairs granite (of any type and size) 18 to 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 15mm thick screed bed in CM 1:4 on kitchen platform, Cill of Window/Ventilator/ flooring/border etc including rubbing, grinding and polishing and also in vertical support all as specified and directed

S&F powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame all as specified. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. (iv) Windows all around will be sealed with silicon sealant.

S&F aluminium grill of 5mm thick of design and opening as approved by engineer in charge fixed with aluminium channel 'F ' 20mmx15mm fixed in position with screw all as specified and directed.

S&F in repairs 20 mm dia decorative type "C" chromium plated anodised aluminium alloy with fixing brackets and all other connected works all as specified and directed.

S&F in repairs Aluminium composite panel sheet 3mm thick PVCF wooden finished of brand name 'Euro bound'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required silicon & screw as in ceiling/coloumns and in vertical surface all as specified and directed.

S&F in repairs anti rusting stainless steel cloth drying hanger made of 16 mm dia hollow anodisied aluminium rod, 6 feet x 4 rods set for heavy duty including fixing on ceiling with metal roof clamps all as specified and directed

S&F in repairs stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600mm including screws all as specified and directed.

Dismantling floor, hearth/wall tiles including cement mortar bedding (but not backing) and removing serviceable tiles and rubbish off the premises outside the MD land all as specified & directed.

M&L first and premium quality HD Glazed ceramic coloured digital tiles 600 mm x 300 mm or 405 mm x 250 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match the shades of the tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed.

M&L Non skid HD coloured ceramic tiles 7 to 8 mm thick, area of each tiles not exc 0.11 sqm as in floors including 15mm thick screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the shades of the tiles all as specified & directed.

M&L Vitrified tiles dark or light shade 600 x 600 x 8-9 mm thick (square/ rectangular) polished, size of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed.

M&L for Vitrified tiles dark or light shade 8-9 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles, laid over and including 10mm thick rendering or backing layer in CM 1:4 all as specified and directed.

Tanking down old board shutter Modular shutter including all fittings all as specified and directed.

S&F 18 mm thick Both Side pre laminated HDHMR Board of any colour, Matt surface finish, grade I as per IS 14587, for frame and shutter with 18 mm wide pvc strips lipping for kitchen cabinets all as specified and directed.

M&L Anti-termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors all as specified and directed.

S&F 18 mm thick marine plyboard laminated of any coulour with high glossy acrylic sheet of 3 mm thick grade I as per IS 14587 for frame and shutter for kitchen cabinet all as specified and directed.

S&F medium weight, cold rolled mild steel, SS finish, (Partial overlay/fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm, self-closing all as specified and directed.

S&F in repairs stainless steel 304 electro-polished for corrosion resistance modular thali holder / basket having size of 42 x 58.5 x 20 cm including telescopic drawer channel having weighing capacity of 6 kg all as specified and directed.

S&F in repairs of stainless steel 304 electro-polished for corrosion resistance modular cup & saucer holder / basket of size 52 x 53.5 x 10 cm with telescopic drawer channel having weighing capacity of 4 kg all as specified and directed.

S&F in repairs round stainless steel cabinet/drawers handlers dia 27mm all as specified and directed.

S&F in repairs stainlesss steel modular perforated cutlery basket SS 304 size of size 52x48.5x10 cm with telescopic drawer channel having weighing capacity of 6 kg all as specified and directed.

S&F in repairs grain trolley SS 304 with telescopic drawer channel having weighing capacity of 6 kg all as specified and directed.

S&F in repairs of stainless steel hanging spice rack having three shelf spaces length of 500 mm all as specified and directed.

S&F butt hinges cast brass with mild hinge spin, bright polished and fixed type B-11 of size 100mm all as specified & directed.

S&F 150 mm extruded brass handles, fabricated type polished all as specified & directed.

S&F brass barrel tower bolts of extruded section 200 mm long all as specified & directed.

S&F 300mm long brass sliding door bolts with sand or die-cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed all as specified and directed.

S&F brass classic cylindrical lock with 3 numbers of keys and 60 mm backset all as specified & directed. Make : Godrej / Harrison / link

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 62 mm x 32 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length all as specified and directed

S&F factory made 28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as specified and directed

S&F in repairs PVC tensile fabric structure with PVDF (polyvinyl-idene-fluoride) Coating with all necessary fixtures, of any size and shape for making canopies, shade, etc. fixed with mild steel structural frame work, weight of the fabric is considered, with fabrics ranging from 900 GSM to 1200 GSM all as specified and directed. Note :- (i) The shape / Design of the shads will be as approved By GE.

S&F in repairs rolled mild steel sections conforming to Gde Fe-290-W(Gde-E-165 ) quality B as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates all as specified.

S&F in repairs Spring Polyester Roller Blinds spring component easy for using, once touch up the second pull stop, can stay any positions you want.Spring strength can be adjusted by a key with hanging rails, mounting bracket, spring, weight including all accessories and required hard ware in different size of window in different rooms all as specified and directed.

M&L in repairs for 8 mm thick laminate wooden flooring, water resistant, termite resistant, polished flooring is a floating glue less click locked & sealed flooring similar to a jigsaw puzzle. In this method, the idividule planks are locked on the each other by means of the clicking together but do not attach to the sub floor on which it is being installed all as specified & directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets all as specified & directed.

S&F 12 mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work all as specified and directed.

S&F 6 mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work all as specified and directed : sample as approved by GE

M&L Decorative laminate 0.9 mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions all as specified and directed.

S&F 1 to 2 mm thick veneered desinger natural wood grain sheet fixed with adhesive as per manufactrue instructions to plywood work all as specified and directed. Sample as approved by GE

S&F plain fillets of second class hard wood, square or rectangular in section, clean sawn, wrought, secured with nails or brads; sectional area exc 6 Sqcm but not exc 13 Sqcm all as specified and directed. Sample as approved by GE

M&L French polishing on new wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats through authorised applicators of paint manufacturers only of approved shade all as specified and directed.

M&L French polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats through authorised applicators of paint manufacturers only of approved shade all as specified and directed.

S&F in repairs 0.5 to 1 mm thickness 3D acrylic washable wall papers fixed with adhesive as per manufactures instructions as in ceiling/columns and in vertical surface all as specified and directed. Approved sample as kept in GE Office.

S&F in repairs 12 mm thickness fluted wpc indoor panel fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required silicon & screw as in ceiling/coloumns and in vertical surface all as specified and directed. Approved sample as kept in GE Office.

S&F in repairs 10 to 12 mm thick toughened glass as in door shutters, plateform, partition including necessary cutting to shape, drilling holes as required, jointing cleats, glazing clips, ruber neoprene packing, Stainless steel fittings such as handle 2 nos, 100mm hinge 3 nos, lock including keys 1 set, Stainless steel snap beading & screws all as specified and directed

S&F frosted film / sunfilm / logo in any type or design and size all as specified and directed

M& for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) all as specified & directed.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as specified & directed.

M&L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 / Cement mortar 1:3 all as specified and directed with following:- (a) M&L for Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong) of size 25 x 25 mm (b) Supply and fixing 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners (c) Supply and fixing GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable clamp to maintain level. (d) Supply and fixing E-board ceiling tiles of size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE

M&L insulated PVC Wall Lining without PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick wood grain printed single side prelaminated PVC sheet duly fitted into the wall as per specifications and drawing all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame all as specified & directed.

S&F PVC ceiling without insulation panels with EPS stuck to 1mm Printred PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing.

M&L for Anodised aluminium snap grid frame work for false ceiling / PoP Ceiling all as specified and directed.

Anil Industrial Corporation

HINDUSTAN BUILDERS

M K ENTERPRISES

D.S. Construction

SR Construction

GANGAJAL

Unity Enterprises

NATH CONSTRUCTION

Bidder Name

HINDUSTAN BUILDERS

Unity Enterprises

Anil Industrial Corporation

NATH CONSTRUCTION

SHRI SAI ENTERPRISES

D.S. Construction

GANGAJAL

SR Construction

M K ENTERPRISES