Rotary Borewell

Drilling of vertically down Rotary Bore Well by Roatary Rigs by the method of Hydraulic Rotary Drilling (Dried mud circulation method) as per clause 3.4 a&b of IS 2800 1979 to a finished diameter of 300mm (which may be carried out by pilot bore of suitable diameter and then remaining to a required diameter) to the required depth as per direction of the concerened departmental officer in all formations suitable for Rotary drilling such as alluvial soils, and stone etc., including the inserting of 175mm dia C.S/C.M Casing pipe or 180mm dia 10 Kg/cm2 PVC casing, the couplings, cap (plug), including special type of gravel packing, bore developement by any surge plunger water get etc., conducting yield test by V-Notch, crew charges, cost of consumables, transportation charges of all materials and all other incidental charges required in the fixation of pipe assembly complete, but excluding the cost of pipes and couplings

Supply and fixing of 180mm dia blue casing threaded casing pipe (CM 10Kg/cm2) incld.transportation, all taxes,labour charges etc.complete.

Slottering charges to PVC casing pipe including cost and conveyance of all men and materials, machinery and labour charges etc. complete.

Flushing of 114 mm (41/2'') dia bore wells at an average pressure of 100 PSI with compressor in all formation including the cost of transportation of compressor and including conducting yield test, crew charges cost of construction and other charges required for flushing any where in khammam district.

Supply, Transportation and Installation of 5.00HP 10 stage single phase ISI submersible motor pumpset Bore well. Makes: Texmo / CRI / KSB / Aryan Varsha / Lubi

Labour Charges for fixing of 5.00 HP submersible motor pumpset including cost of all men and materials etc., complete

Supply and Transportation of control panel for single phase submersible motors up to 5 HP @ 220V 50Hz operating range between 80 to 240V including supply and fixing of Direct - on - Line LTLK / SIEMENS/ CROMPTON make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.

Manufacture, supply, & delivery of Polyethylenepipes (PE-100 Grade) for water supply conforming to IS 4984 2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (10.0 kg/ sqcm (SDR 13.6) 32 mm dia)

Supply of 3 core 1.5 Sqmm Flat Copper cable of ISI for Submersible Motors including cost and conveyance of all materials including cost and conveyance of all materials, taxes etc., complete.