Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.4 Cr
EMD Value
₹4.8 L
Closing Date
21 Sept 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Pritam Kumar
POWERGRID CORPORATION OF INDIA LIMITED, Eastern Region-I Headquarter (ER-I RHQ), Board Colony, Near Transformer Repair Works, Shastri Nagar, Patna, Bihar 800023, PATNA, BIHAR-800023, India
Balance work for Construction of Township Quarters at Chaibasa Substation.
5002002368/OTHERS/DOM/D01 - ER1 RHQ -2
Open
Civil Works - Buildings
Works
CHAIBASA, POWERGRID
₹12,500
₹4.8 L
22 Aug 2022
22 Aug 2022
21 Sept 2022
22 Aug 2022
21 Sept 2022
22 Aug 2022
Name of Package : Balance work for Construction of Township Quarters at Chaibasa Substation.
Package No : NIT-417
Specification No. : 5002002368/OTHERS/DOM/D01 - ER1 RHQ -2
Contract Period 11.50 Months
: Attachments : General guidelines for filling up the Attachments : CT Analyser -NIT-417 :
Balance work for Construction of Township Quarters at Chaibasa Substation.
Specification No.: 5002002368/OTHERS/DOM/D01 - ER1 RHQ -2
1 Fill up only green shaded cells in the relevent attachments.
2 Attachments 3(QR), 4, 5, 6, 7, 9, 10, 11, 12, 13,14, 15, 16, 17 and Bid Form for 1st Envelope are included here.
3 Attachment 1 Bid Security : To be submitted as per proforma provided in the bidding document.
4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.
5 Attachment 8 Manufacturer’s Authorisation Form : To be furnished as per proforma provided in the bidding document, on the letter head of the each Manufactures proposed to supply main items. This attachment is not included here.
6 Attachment 14 Integrity Pact : To be submitted as per ITB Clause No. 9.3(n) and as per remarks in the Attach 14-IP.
पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड
(भारत सरकार का उद्यम)
Power Grid Corporation of India Limited
(A Government of India Enterprises)
Balance work for Construction of Township Quarters at Chaibasa Substation.
5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Individual Firm 1
Licensee of a Manufacturer 2
Enter following details of the bidder Representative of a Manufacturer
Specify type of Bidder [Select from drop down menu] #REF!
Name of Lead Partner
Address of Registered Office …….. …… ………. ……….
Name of Other Partner …….. …… ………. ……….
Printed Name …….. …… ………. ………. 01/Dec/25
Designation …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-3(JV) NIT-417 #REF! NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(Joint Venture Agreement and Power of Attorney for Joint Venture*)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials #REF!
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29
…….. …… ………. ………. Gurgaon (Haryana) - 122001
Name(s) and Addresse(s) of other partner(s)
Name : #REF! #REF!
Address : #REF! #REF!
The Joint Venture Agreement (as per the proforma attached at no. 15 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at no. 14 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith.
Date : Printed Name : …….. …… ………. ………. 0
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-3(QR) NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(Qualifying Requirement Data)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
For our Qualifying Requirements Data, please refer Schedule-QR of this volume.
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-4 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(Form of Certificate of Origin and Eligibility)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby certify that equipment and materials to be supplied are produced in [Enter the name of country where from equipments & material shall be supplied] eligible source country. Equipments & Materials produced in [Name of countries] Company incorporated & registered in [Name of countries]
We hereby certify that our company is incorporated and registered in [Enter the name of country where from equipments & material shall be supplied] eligible source country.
Date : Printed Name : …….. …… ………. ……….
country. country. [Enter the name of country where from equipments & material shall be supplied] [Enter the name of country where from equipments & material shall be supplied]
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-4(A) NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(List of Special Maintenance Tools & Tackles)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29
…….. …… ………. ………. Gurgaon (Haryana) - 122001
We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:
Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.
S.No. For Equipment Item Description Unit Quantity
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-4(B) NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(List of Special Maintenance Tools & Tackles)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29
…….. …… ………. ………. Gurgaon (Haryana) - 122001
We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-5 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(Bought-out & Sub-contracted Items)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby furnish the details of the items/ sub-assemblies, we propose to buy for the purpose of the subject Package:
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor
Name Nationality
We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.
Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.
Name of Plant Address
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-5 NIT-417
(Bought-out & Sub-contracted Items)
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor
Name Nationality
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-6 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:
Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation
The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-6 NIT-417
Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-7 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(Details of Alternative Bid)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
No Alternative Bid
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-8 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(Manufacturer's Authorization Form)
Contracts and Materials
Power Grid Corporation of India Ltd.,
"Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001 Name of Manufecture Name/Description of Goods Factory Address Name & Address of Bidder package name alongwith project name
…(insert name of the Manufacturer) .. …(insert name and/or description of the goods) … ..(insert address of factory) .. Balance work for Construction of Township Quarters at Chaibasa Substation.
WE …(insert name of the Manufacturer) .. who are established and reputable manufacturers of …(insert name and/or description of the goods) …. having production facilities at ..(insert address of factory) .., , , do hereby authorize , …….. …… ………. ………., …….. …… ………. ………., …….. …… ………. ……….(hereinafter, the “Bidder”) to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for Balance work for Construction of Township Quarters at Chaibasa Substation. including the above plant & equipment or other goods produced by us. 0
WE …(insert name of the Manufacturer) .. who are established and reputable manufacturers of …(insert name and/or description of the goods) …. having production facilities at We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations.
We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations. We also hereby declare that we and have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability). We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract. ..(insert address of factory) .., , , do hereby authorize , …….. …… ………. ………., …….. …… ………. ………., …….. …… ………. ……….(hereinafter, the “Bidder”) We also hereby declare that we and have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability).
For and on behalf of the …(insert name of the Manufacturer) .. to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for Balance work for Construction of Township Quarters at Chaibasa Substation. including the above plant & equipment or other goods produced by us. We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract.
In the capacity of
Date : Printed Name : …….. …… ………. ……….
Note :1 The letter of Undertaking should be on the letterhead of the Manufacturer and should be signed by a person competent and having Power of Attorney to legally bind the Manufacturer. It shall be included by the bidder in its bid.
2 Above undertaking shall be registered or notarized so as to be legally enforceable.
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-9 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(Work Completion Schedule)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby declare that the following Delivery Schedule shall be followed by us for the subject Package i.e., Balance work for Construction of Township Quarters at Chaibasa Substation. for the period commencing from the effective date of Contract to us :
Sl. No. Description of Work Period in months from the effective date of Contract
1 Submission of drawings for Approval
2 Production of samples for type testing
3 Completion of type tests
4 Commencement of Commercial Production
5 Offer of material for pre-despatch testing and inspection
6 Commencement of shipment
1 Completion of shipment (Receipt at final destination Site)
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-10 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(Guarantee Declaration)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We conform that the equipments offered shall have minimum performance specified in Technical Specification. We further guarantee the performance/efficiency of the equipments in response to the Technical Specifications.
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-11 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(Information regarding Ex-employees of POWERGRID in our Organisation)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-11 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(Information regarding Ex-employees of POWERGRID in our Organisation)
Name of Other Partner To:
Contracts and Materials
Name : …….. …… ………. ………. Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-12 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(Price Adjustment Data)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We hereby furnish the relevant details pertaining to the price adjustment provisions for equipment as specified in your specifications and documents for the Balance work for Construction of Township Quarters at Chaibasa Substation.The necessary documentary evidence are enclosed :
Sl. No. Name of Materials Value of co-efficient Name of the published index * Value of index as 30 days prior to date set for opening of bids as on **
1 EC grade aluminium ingots, co-eifciant a = 0.65 CACMAI
High Tensile Galvanised Steel wires , co-efficient b = 0.15 CACMAI FALSE FALSE
High Carbon Steel Rods , co-efficient b = High Tensile Galvanised Steel wires , co-efficient b =
High Grade Electrolytic Zinc , co-efficient c =
3 Labour, Co-efficient l= 0.05 Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)
Note: * Indicate the publisher of the index.
** Indicate the date of indices for which the values are being furnished.
^ For bidders who intend to quote their prices based on High Tensile Galvanised Steel wire, the coefficient for the same (i.e. coefficient ’b’ for High Tensile Galvanised Steel wire) shall be 0.15 and coefficient ‘c’ shall not be applicable.
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-13 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(Declaration regarding Social Accountability)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-14 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
Bidders are required to submit 02 copy of Integrity Pact as per format enclosed at vol-I
Date : Printed Name : …….. …… ………. ……….
Instruction for printing & submitting Integrity Pact
1. The requisite format of Integrity Pact (if required)is attached in Vol-I of Bid Documents.
2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.
3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.
4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.
5. For further details bidders may please refer ITB Clause 9.3 (n).
Specification No. : 5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-15 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(Information for E-payment, PF details and declaration for Micro/Small and Medium Enterprise)
Bidder's Name and Address (Sole Bidder [Individual Firm]): To:
Contracts and Materials
Name: 0 Power Grid Corporation of India Ltd.,
Address: …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidyut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
We are furishing the following details of Statutory Registration Numbers and details of Bank for electronic payment
1 Name of the Supplier/ Contractor in whose favour payment is to be made
2 Address with PIN Code and State
Registered Office:
Correspondence Address:
3 Status- Company/others [Declaration of Micro/ Small/Medium Enterprtise ]
4 Permanent Account [PAN] No.
5 Goods & Services Tax [GST] No.
6 PF Registration No. Of the Company
7 PF Regional Office covered (with Address)
8 Name of Contact Person
9 Telephone No(s)
10 Bank Details for Electronic Payment
Name ofthe Bank:
Address of the Branch:
Type of Account: Savings/Current
11 9 digit MICR code printed at bottom in middle, next to cheque no.
12 IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed
We hereby declare that the above information are true and correct and we agree that thepayment onaccount of this Contract, in the event of Award, be made in the above account maintained in theabove mentioned Bank.
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-16 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
(Additional Information)
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : ……………………………… Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
In support of the additional information required as per ITB Sub-Clause 9.3 (p) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):
1.0 The Bidder shall furnish
A certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(p)(i)]
1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:
Name of the (Lead Partner) :
Name of the Banker by whom certificate issued
Date of certificate (should not be earlier than 3 months prior to date of bid opening)
Whether fund based/non fund based limits are indicated in the certificate
Whether extent of utilization is indicated in the certificate
1.2 The Bidder should accordingly also provide the following information/documents
(i) Details of Banker:
Address of Banker
Contact Name and Title
(ii) As per para 1.0, Authorization Letter(s) from the bidder addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:
Sl. No. Letter Ref. Date Addressed to (name of the Bank)
2.0 Litigation History
The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(p)(ii)]
2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years
Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount
3.0 Description of the plant for carrying out the work
Bidders should provide information of the plant(s) for carrying out the work including the proposal of manufacturing methods in sufficient detail to demonstrate the adequacy of the bidder’s proposals to meet the technical specification.
4.0 OTHER INFORMATION
4.1 Current Contract Commitments of works in progress
Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.
Details of Contract Type of Conductor Ordered Quantity as per Contract Balance Quantity to be supplied as on Completion Period for balance quantity
Commencement Completion
4.2 Financial Data:
Details Actual (Previous five years) Projection for next five years
Total Liability
Current Liability
Profit before taxes
Profit after taxes
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Attachment-17 NIT-417
Balance work for Construction of Township Quarters at Chaibasa Substation.
Bidder’s Name and Address (Lead Partner) : To:
Contracts and Materials
Name : Power Grid Corporation of India Ltd.,
Address : …….. …… ………. ………. Eastern Region Transmission System-I
…….. …… ………. ………. Vidut Board Colony,
…….. …… ………. ………. Shastri Nagar Patna 800023
Date : Printed Name : …….. …… ………. ……….
Specification No. :5002002368/OTHERS/DOM/D01 - ER1 RHQ -2 Bid Form 1st Envelope NIT-417 1 one 1 st 1 January
2 two 2 nd 2 February
BID FORM (First Envelope) 3 three 3 rd 3 March
4 four 4 th 4 April
Bid Proposal Ref. No. 5 five 5 th 5 May
Date : 6 six 6 th #VALUE! 6 June
7 seven 7 th #VALUE! 7 July
To: 8 eight 8 th #VALUE! 8 August
Contracts and Materials 9 nine 9 th #VALUE! 9 September
Power Grid Corporation of India Ltd., 10 ten 10 th 10 October
Eastern Region Transmission System-I 11 eleven 11 th 11 November
Vidut Board Colony, 12 twelve 12 th 12 December
Shastri Nagar Patna 800023 13 thirteen 13 th
14 fourteen 14 th
Name of Contract : Balance work for Construction of Township Quarters at Chaibasa Substation. 15 fifteen 15 th
Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th
1.0 Having examined the Bidding Documents, including Amendment Nos. dated 00/01/1900 the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). 17 seventeen 17 th
2.0 Attachments to the Bid Form (First Envelope) Bank Draft 18 eighteen 18 th
In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Enter details here. Pay Order 19 nineteen 19 th
(b) Attachment 2(NIT-417) : A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Please note that if bid validity is less than 07 (seven) months, your bid may be rejected Bank Guarantee (0) 21 st
(c) Attachment 3(NIT-417) : The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3(c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents Attachment-3(QR). 22 th
#REF! Applicable 23 th
#REF! Not Applicable 24 th
(d) Attachment 4(NIT-417) : The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. 25 th
(e) Attachment 5(NIT-417) : The details of all major items of services or supply which we propose subletting in case of award, giving details of the name and nationality of the proposed subcontractor/sub-vendor for each item. 26 th
(f) Attachment 6(NIT-417) : The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th
(g) Attachment 7(NIT-417) : The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. [NOT APPLICABLE] 28 th
(h) Attachment 8(NIT-417) : Manufacturer’s Authorisation Forms. 29 th
(i) Attachment 9(NIT-417) : Work Completion Schedule. 30 th
(j) Attachment 10(NIT-417): Guarantee Declaration. 31 st
(k) Attachment 11(NIT-417): Information regarding ex-employees of Purchaser in our firm.
(l) Attachment 12(NIT-417): Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents.[NOT APPLICABLE]
(m) Attachment 13(NIT-417): Declaration regarding Social Accountability.
(n) Attachment 14(NIT-417): Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.[NOT APPLICABLE]
(o) Attachment 15(NIT-417): Information for E-payment, PF Details & declaration regarding Micro/Small & Medium Enterprises.
(p) Attachment 16(NIT-417): Additional Information.
(q) Attachment 17(NIT-417): Declaration.
3.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.
4.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Goods, in and outside of India.
4.1 100% of applicable Taxes and Duties, which are payable by the Purchaser under the Contract, shall be reimbursed by the Purchaser after despatch of goods on production of satisfactory documentary evidence by the Supplier in accordance with the provisions of the Bidding Documents.
4.3 We also understand that, in case of award on us, you shall reimburse to us octroi/entry tax as applicable for destination site/state on all items of supply. Further, Service Tax, if applicable, for the services to be rendered by us, the same is included in our bid price in Second Envelope.
4.4 We confirm that we shall also get registered with the concerned Sales Tax Authorities, in all the states where the project is located.
5.0 Construction of the Contract
5.1 We declare that we have studied clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us the Contracts covering all goods and related services.
6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:
[a] Bid document Fee Clause 3.0 of SCC.
[b] Bid Security/ Bid Guarantee Clause No 13.0, ITB, Section -II, and cl. 4.0 of SCC, Section-IV, Volume-I.
[c] Terms of Payment Clause No.64.0, Conditions of Contract (GCC) & Clause 12.0, SCC
[d] Contract Performance Guarantee/Performance Security Clause No.14, Section GCC, Vol.-I, Conditions of Contract & Clause 13.0 of SCC, Section-IV, Vol-I.
[e] Liquidated Damages Clause No 11.0 of SCC, Volume-I
[f] Price & Price Basis Clause No 11.0 of ITB,
[g] Guarantee & Defect Liability Period Cl.No.45.0 & 46.0 Section. GCC, Vol. I, Conditions of Contract & Clause 9.0 of SCC, Volume- I
[h] Work schedule Clause No. 10.0 of SCC, Volume -I
Further we understand that deviation taken in any of the above clauses by us may make our bid non-responsive as per provision of bidding documents and be rejected by you.
7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award to us, and to achieve the delivery of goods and related services within the time stated in the Bidding Documents.
8.0 If our bid is accepted, we undertake to provide an Advance Payment Security and Performance Security(ies) in the form and amounts, and within the times specified in the Bidding Documents.
9.0 We agree to abide by this bid for a period of six (06) months from the date fixed for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period
10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.
11.0 We understand that you are not bound to accept the lowest or any bid you may receive.
12.0 Commissions or gratuities, if any, paid or to be paid by us to agents relating to this Bid, and to contract execution, if we are awarded the contract, are listed below:
Name and address of agent Amount and Currency Purpose of Commission or gratuity
(If none, state “none”)
13.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.
Thanking you, we remain,
Yours faithfully,
For and on behalf of
Date : Printed Name : …….. …… ………. ……….
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer :
Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 (NIT-417) : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.
ElectronicForms™
View - Template of ElectronicForm™
To close this Screen, click on the [Close] button located on the bar above, or at the bottom of the Screen
Template of ElectronicForm™
Relevant Bid-Part Techical
ElectronicForm™ Template ID 7PG-2010-FT000010
Template Reference TECHNO-COMMERICIAL (First Envelope)
Template Description Tower Package NIT-417 Specification No. : 5002002368/OTHERS/DOM/D01 - ER1 RHQ -2
Balance work for Construction of Township Quarters at Chaibasa Substation.
Bidders's Name #REF!
Section-2 (Outline of Requirements)
* 1 Integrity Pact Details
Submitted (Doc. Code No. DC-9008-April-2009-Rev-0) Yes
* 2 BID SECURITY DETAILS
2 (a) Submitted Yes
* 2 (b) Bid Security No.
* 2 (c) Issued by (Name of Bank)
* 2 (d) Bid Security Amount 0 0.00
* 2 (e) Valid upto
* 1. AUTHORIZED SIGNATORY (Sole Bidder / Lead Partner of JV)
1 (b) Designation …….. …… ………. ……….
2. AUTHORIZED SIGNATORY (Other Partner of JV)
(If Bidder is JV)
2 (a) Name #REF!
2 (b) Designation #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
23 Twenty Three
27 Twenty Seven
28 Twenty Eight
33 Thirty Three
37 Thirty Seven
38 Thirty Eight
73 Seventy Three
74 Seventy Four
75 Seventy Five
77 Seventy Seven
78 Seventy Eight
79 Seventy Nine
83 Eighty Three
87 Eighty Seven
88 Eighty Eight
93 Ninety Three
97 Ninety Seven
98 Ninety Eight
100 One Hundred
Name of the Package Balance work for Construction of Township Quarters at Chaibasa Substation
Balance work for Construction of Township Quarters at Chaibasa Substation
1 Fill only Green shaded cells in Details and Schedule-I.
2 All the cells in Summary will be auto filled, therefore no cell is required to be filled in that sheet.
3 Instructions ,if any will be displayed automatically after selecting the cell.
Click here to proceed.
पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड
(भारत सरकार का उद्यम)
Power Grid Corporation of India Limited
(A Government of India Enterprises)
Balance work for Construction of Township Quarters at Chaibasa Substation
Enter the following details of the bidder
Name of the bidder
Alternative E-mail
BQO for Balance Work of D type quarter at Chaibasa S/S.(Electrical Portion)
SECTION-III : ELECTRICAL INSTALLATION & FIXTURES
SL. No. REF. DSR' 18 DESCRIPTION OF ITEM UNIT QTY. (B1- TYPE: 2) BOQ QTY. (D- TYPE: 1) UNIT RATE (Rs.) as per DSR-18 UNIT RATE AMOUNT (D-01)
SUB HEAD- I : WIRING
1 1.8.1 Wiring for light point/ fan point / exhaust fan point/ with 1.5 sq. mm. FR PVC insulated copper conductor single core cable in recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc. as required ( GROUP A) Point 50 694 619.64 30,982 1
2 1.5 Wiring for light / power plug with 2 X 4 sq. mm. FR PVC insulated copper conductor single core conductor in recessed steel conduit alongwith 1 no. 4 sq. mm. FR PVC insulated copper conductor for loop earthing as required. Meter 40 265 236.61 9,464 1
3 1.7.2 Wiring for circuit wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in recessed steel conduit as required: 2 X 2.5 sq. mm. + 1 X 2.5 sq. mm. earth wire Meter 250 229 204.46 51,116 1
4 1.7 Wiring for submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in recessed steel conduit as required: 0 1
1.7.3 2 X 4 sq. mm. + 1 X 4 sq. mm. earth wire Meter 100 263 234.82 23,482 1
1.7.4 2X 6 sq. mm. + 1 X 6 sq. mm. earth wire Meter 40 356 317.86 12,714 1
5 1.21.2 Supplying and fixing of 25 mm dia medium class PVC conduit along with accessories in recess including cutting the wall and making good the same(for Telephone and TV cable)(14 Gauge GI pull wire to be provided inside the conduit) Meter 140 90 80.36 11,250 1
SUB HEAD - III : ERECTION OF FITTINGS & ACCESSORIES 0
6 1.22. Supplying and fixing metal box of following sizes in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required. 0 1
a) 1.22.1 75 mm X 75 mm X 60 mm deep(for Telephone and TV jack) Each 4 140 125.00 500 1
b) 1.22.2 100 mm X 100 mm X 60 mm deep(for TV JB) Each 4 160 142.86 571 1
c) 1.22.11 200 mm X 150 mm X 100 mm deep(Inspection Box) Each 1 308 275.00 275 1
7 1.29 Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection,painting etc. as required. Each 8 285 254.46 2,036 1
8 1.30 Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection,painting etc. as required. Each 7 406 362.50 2,538 1
9 1.23.4 Supplying and fixing 3 pin 5/6 amp socket outlet on existing switch box/cover including connections etc. as required. Each 8 58 51.79 414 1
10 1.23.1 Supplying and fixing 5/6 amp piano type switch on existing switch box/cover including connections etc. as required. Each 8 45 40.18 321 1
11 1.34 Supplying and fixing brass batten / angle holder including connection etc. as required Each 16 117 104.46 1,671 1
12 1.35 Erection of wall bracket / ceiling fittings of all sizes and shapes containing upto 2 GLS lamps per fitting, complete with all accessories including connection etc. as required Each 30 98 87.50 2,625 1
13 1.38 Supplying and fixing call bell/buzzer suitable for D.C./A.C. single phase, 230 volts, complete as required. Each 1 92 82.14 82 1
14 1.41 Installation, Testing and commissioning of pre-wired fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq. mm. FR PVC insulated, copper conductor, single core cable and earthing etc. as required Each 20 168 150.00 3,000 1
15 1.44 Installation, testing and commissioning of ceiling fan and regulator including wiring the down rod of standard length (upto 30cm) with 1.5 sq.mm PVC insulated copper conductor, single core cable etc. as required. Each 10 171 152.68 1,527 1
16 1.49 Numbering of ceiling fan /exhaust fan / flourescent fitting as required Each 35 48 42.86 1,500 1
17 1.50.1 Installation of exhaust fan upto 450mm sweep in the exisiting opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commisssiong etc. as required. Each 5 363 324.11 1,621 1
18 2.18 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps 'C' series SP, MCB, in sheet steel enclosure , in recess, with chained metal cover for socket outlet and complete with connections, testing and commissioning etc. as required. Each 2 1232 1100.00 2,200 1
SUB HEAD - IV : MCB'S & MAIN DISTRIBUTION BOARD : 0
19 Supplying and fixing 4 way (2 + 12), double door surface / recessed mounting single pole and neutral, pre-wired , sheet steel, MCB distribution board, 240 volts, in recess, complete with loose wire box, terminal blocks,duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB) Each 2 3410.00 6,820 2
20 Supplying and fixing the following in existing MCB DB complete with connections, testing and commissioning etc. as required. 0
a) Incoming 40 A Double Pole RCBO having a sensitivity current up to 300 mA Each 2 1556.00 3,112 2
b) Outgoing 'C' series 240 V 10 A MCB Each 10 162.00 1,620 2
c) Outgoing 'C' series 240 V 20 A MCB Each 4 59.00 236 2
21 2.21 Providing & fixing MV Danger Notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick and vitreous enamelled white on both side & with inscription in single red colour on front side as required. Each 1 226 201.79 202 1
SUB HEAD - V : EARTHING & LOOP EARTHING 0
22 5.2 Earthing with G.I. earth pipe 4.5 mtr. Long, 40 mm. dia including accessories , and providing masonry enclosure wit cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required Set 1 5308 4739.29 4,739 1
23 5.10 Providing and fixing 25 mm x 5 mm Copper strip in 40 mm dia GI pipe from earth electrode as required. Meter 10 1224 1092.86 10,929 1
SUB HEAD - VI : LIGHTNING PROTECTION 0.00 0
25 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 1 448 400.00 400 1
26 6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 15 93 83.04 1,246
27 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) Meter 20 104 92.86 1,857
28 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) Meter 10 163 145.54 1,455
29 6.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. Each 1 102 91.07 91
SUB HEAD - VI : -TELEPHONE & TV CONNECTION 0
30 1.18.2 Supplying and drawing 2 pair , 0.5 sq mm FR PVC insulated copper conductor, unarmoured telephone cable in existing recessed steel conduit as required Meter 60 20.00 17.86 1,071 1
31 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulator, shielded with fine tinned copper braid and protected with PVC sheath in the existing recessed steel conduit Meter 40 33 29.46 1,179 1
32 Supplying and drawing 10 pair , 0.5 sq mm FR PVC insulated copper conductor, unarmoured telephone cable in existing recessed steel conduit as required Meter 20 301.00 6,020 2
33 Supplying and drawing co-axial TV cable RG-11 grade, 0.7 mm solid copper conductor PE insulator, shielded with fine tinned copper braid and protected with PVC sheath in the existing recessed steel conduit Meter 20 74.00 1,480 2
34 Supplying and fixing of 2 pin telephone socket on existing cover including connection etc. as required Each 4 38.00 152 2
35 Supplying and fixing co-axial Female T.V. jack including making connection, soldering etc. as required. Each 2 49.00 98 2
36 Supplying and fixing telephone tag block of powder coated metal box with locking arrangement complete as required of the following capacity 0
10 pairs Each 1 516.00 516 2
SUB HEAD - VII : SUPPLY OF FIXTURES 0
37 1200 mm sweep A.C. ceiling fan of approved make ( Khaitan or equivalent)with double ball bearing motor with all accessories suitable for operation on 230 V single phase, 50 Hz AC supply complete as required. Each 10 2250.00 22,500 2
38 12 inch sweep , 1400 R.P.M 1-Phase A.C. Exhaust fan (Khaitan Make or equivalent) complete with louver/shutter and its all accessories complete as required. Each 5 4006.00 20,030 2
39 Supply of Surface Mounted round, decorative downlighter with HF electronic ballast and translucent diffuser, pre-fitted with flat profile 2G X 15/56 lamp base ( Havells Make CAT No. LHDC71125670 or equivalent reputed Make)(Lamp included) Each 2 1482.00 2,964 2
40 Supply of industrial Bulkhead luminaires for 100 W GLS lamps of Crompton Make IBH1110ES with cast aluminium LM6 body, heat resistant glass cover with MS galvanised wireguard, etc. or equivalent complete as required. Each 2 840.00 1,680 2
41 Supply of decorative ultra slim box fixture with snap-on installers and domestic electronic ballast ( Havells Make CAT No. LHDT18128032 or equivalent reputed Make)( T5 FTL included) Each 2 1076.00 2,152 2
42 Decorative round downlighter luminaire CAT no. LHDC 73122670 of Havels or equivalent make with lamp etc. as required Each 10 1482.00 14,820 2
43 Bulk head fitting CAT no. NXC 101 of Philips make complete with glass cover, wire guard, 60 W lamps etc. as required. Each 10 840.00 8,400 2
44 1 X 4' - 36 W decorative sleek luminaire with electronic ballast complete with all accessories and tube CAT no. LHDF 32136025 Havells or equivalent approved make Each 12 1086.00 13,032 2
45 Decorative ceiling mounted luminaire CAT no. WW BCS 1901 / 1902 / 1903 of Philips or equivalent make with lamp etc. as required (for porch light) Each 1 2798.00 2,798 2
BQO for Balance Work of D type quarter at Chaibasa S/S.(civil portion)
NAME OF CONTRACT : Construction of D type Quarters at 400 kV Chaibasa S/S.
Sl No REF. DSR-2021 Item Description UNIT Rate incl GST UNIT RATE BOQ QUANTITY AMOUNT
SECTION I (CIVIL WORKS)
1 2.8.1 Earth work in excavation by Mechanical Means (Hydralic Excavator) /Manual Means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. Cum 286.85 256.12 50.000 12805.804
2 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides, of the foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. Cum 253.95 226.74 15.000 3401.116
3 2.27 Supply and filling in plinth with local sand under floors including watering, ramming, consolidating and dressing complete. Cum 2161.2 1929.64 5.000 9648.214
4 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos / Lindane emulsifiable concentrate of 20 Percent Litre 200.9 179.38 50.000 8968.750
5 Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE-CONSTRUCTIONAL ANTI-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (Plinth area of the building at ground floor only shall be measured for payment). Chlorpyriphos / Lindane Emulsifiable concentrate 20 Percent with 1 Percent concentration Sqm 78.36 78.36 30.000 2350.800
6 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering : All works upto plinth level. 0.000
I 4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) Cum 6326.05 5648.26 10.000 56482.589
II 4.1.3 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) Cum 7555.05 6745.58 2.000 13491.161
lll 4.1.10 1:5:10 ( 1 Cement: 2 coarse sand : 5 graded stone aggregate 10mm nominal size) Cum 6050.65 5402.37 1.000 5402.366
7 4.12 Extra for providing and mixing water-proofing material in cement concrete work @ 1 Kg per 50 Kgs of cement. Per 50 Kgs of cement 57.15 51.03 5.000 255.134
8 4.2.3 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 Cu.m. 9375.2 8370.71 1.000 8370.714
9 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All works upto Plinth level. 1:1.5:3 (1 Cement : 1.5 Coarse sand : 3 graded stone aggregate 20 mm nominal size) Cu.m. 8364.2 7468.04 3.000 22404.107
10 5.2.2 Reinforced cement concrete work in walls ( any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement. 1:1.5:3 (1 Cement: 1.5 Coarse sand: 3 Graded stone aggregate 20 mm nominal size) Cu.m. 10185.05 9093.79 4.000 36375.179
11 5.3 Reinforced Cement concrete in beams, suspended floors, roofs having slope upto 15 degree, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggr. 20 mm nominal size). Cu.m. 10719.3 9570.80 2.000 19141.607
12 5.9 Centring and shuttering including strutting, propping etc. and removal of form for: 0.000
II 5.9.2 Walls (any thickness) - Pardie Walls including attached pilasters, buttresses, plinth & string courses etc. Sq.m. 669.55 597.81 20.000 11956.250
III 5.9.3 Suspended floors & Slabs, roofs, landings, balconies and access platform Sq.m. 766.55 684.42 20.000 13688.393
V 5.9.6 Columns, pillars, piers abutments posts & struts Sq.m. 804.25 718.08 20.000 14361.607
VII 5.9.9 Arches, domes, vaults upto 6 m span Sq.m. 1826.25 1630.58 10.000 16305.804
13 5.22.6 Reinforcement for R.C.C. work including straightening, cutting, bending, binding and placing in position complete. Thermo-Mechanically Treated bars Kg. 89.65 80.04 500.000 40022.321
14 6.1.2 Brick work with F.P.S bricks of class designation 75 in foundations & plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand). Cu.m. 6658.25 5944.87 5.000 29724.330
15 6.4.2 Brick work with F.P.S bricks of class designation 75 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand). Cu.m. 8288.35 7400.31 5.000 37001.563
16 6.13.2 Half brick masonary with FPS bricks of class designation 75 in superstructure above plinth level up to floor v level.Cement mortar 1:4(1cement:4 coarse sand). Sq.m. 1018.05 908.97 30.000 27269.196
17 6.15 Extra for providing and placing in position 2 Nos., 6mm dia M.S. bars at every third course of half brick masonry (with F.P.S. bricks). Sq.m. 86.45 77.19 30.000 2315.625
18 9.129 Providing & fixing cup board of shutters 25mm thick, with pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade I Type II), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. Sq.m. 1982.7 1770.27 9.000 15932.411
19 9.132 Providing and fixing aluminium, U beading of required size to pre-laminated / flush door shutter including fixing etc. complete as per direction of Engineer - in - charge. Kg. 530.3 473.48 10.000 4734.821
20 9.27.2.1.1 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :30 mm thick shutterswith ISI marked M.S. pressed butt hinges bright finished of required size : Second class teak wood . Sqm 3863.65 3449.69 10.000 34496.875
21 21.1 Providing ang fixing aluminium work for doors, windows, ventilators, and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust fee, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing, panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : 0.000
i Avg. of 21.1.1.2 & 21.1.2.2 For fixed portion, shutters of doors, windows & ventilators including providing & fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 515.55 460.31 110.000 50634.375
22 10.29.1 Providing and fixing fly proof wire gaauge to Aluminium frame window, celestory wndows & doors with MS flat 15x3mm and nuts & bolts etc complete fittings: Galvanised MS wire gauge with 0.63 mm dia wire and 1.4 mm aperature on both sides. Sqm 732.2 653.75 25.000 16343.750
23 9.43 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. metre 626.55 559.42 30.000 16782.589
24 9.79.2 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers including necessary screws etc. complete (best make of approved quality): 50 mm Each 306.4 273.57 4.000 1094.286
25 9.80 Providing and fixing 50 mm bright finished brass cupboard or wardrobe knob of approved quality with necessary screws. Each 63.65 56.83 8.000 454.643
26 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 300 x 16 mm Each 260.3 232.41 6.000 1394.464
27 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 0.000
28 9.100 Providing and fixing aluminium handles ISI marked anodised anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 0.000
29 9.101.2 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour & shade with necessary screws etc. complete : Twin rubber stopper Each 62.25 55.58 9.000 500.223
30 9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI Marked, with six levers and a pair of Anodised [Anodic coating not less than Grade AC 10 as per IS:1868 ] Aluminium lever handles with necessary screws etc. complete (Best make of approved quality) Each 739.8 660.54 8.000 5284.286
31 10.18 Providing and fixing circular/hexagonal cast iron or MS sheet box for ceiling fan clamp of internal dia 140 mm, 73 mm height , top lid of 1.5mm thick M.S sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron / M.S . sheet box by means of 3.3mm dia round headed screws,one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing. Each 185.2 165.36 10.000 1653.571
32 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kgs. 197.7 176.52 280.000 49425.000
33 10.25.2 Steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required. In gratings, frames, guard bars, ladders, railings, brackets, gates, grills and similar works. Kgs. 142.3 127.05 100.000 12705.357
34 Providing and erecting railing in stainless steel with hand rail out of 50mm dia. stainless steel medium hollow pipe and 25mm dia. vertcal medium hollow pipes and 25mm dia vertical medium hollow pipes at a spacing of 200 mm c/c with 40 x 6 S.S. continuous straps to be fixed to RCC padadis and also at 0.6 m level. The total height of the railing shall be 80 cms above the RCC padadi. RMT 498.02 20.000 9960.400
35 8.2 Providing and fixing 18 mm thickgang saw cut mirror polished [premoulded and prepolished] machine cut for kitchen platforms, vanity counters, window sils, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. 0.000
i 8.2.2.2 Granite of any colour and shade: Area of slab over 0.50 sq.m. Sq.m. 4425.35 3951.21 4.000 15804.821
ii 8.2.1.1 Rajnagar plain White marble/udaipur green marble/zebra black marble:Area of slab up to 0.50 sq.m. Sq.m. 2906.45 2595.04 30.000 77851.339
36 Avg. of 8.3.1 & 8.3.2 Extra for providing edge moulding to 18mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer - in - Charge. Marble / Granite work RMT 331.875 296.32 15.000 4444.754
37 11.37A Providing and Fixing 1st quality ceramic glazed tiles conforming to IS 15622 (Thickness to be specified by the Manufacturer ) of Approved Make in all colours, shades except begundy, bottle-green, black of any size as approved by the Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement mortar 1:3 (1 Cement:3 Coarse Sand) and jointing with grey cement slurry @ 3.3 kg per sq m including pointing in white cement mixed with pigment of matching shade complete. Sq.m. 938.5 837.95 68.000 56980.357
38 11.37 Providing and Laying ceramic glazed floor tiles 300 mm X 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of Approved make in all colours such as White, Ivory, grey, Fume, Red Brown, laid on 20 mm thick bed of Cement mortar 1:4 (1 Cement:4 Coarse Sand) including pointing the joints with white cement and matching pigments etc complete. Sq.m. 935.6 835.36 58.000 48450.714
39 11.41.2 Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of Tile 600 x 600 mm. Sqm. 1416.65 1264.87 150.000 189729.911
40 11.46.2 Providing and laying Vitrified tiles in different sizes (thichness to be specified by manufacturer), with waterabsorption less than 0.08% and conforming to I.S. 15622 of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm. Sqm. 1466.5 1309.38 12.000 15712.500
41 8.9.1.2 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. Sqm. 3105.5 2772.77 25.000 69319.196
42 12.20 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. Sqm. 620 553.57 10.000 5535.714
43 16.68 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over filling the joints with fine sand of Engineer-in-charge. Sqm. 951 849.11 25.000 21227.679
44 12.21.1 Providing gola 75 X 75 mm in cement concrete 1 : 2 : 4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 10 mm and down gauge) including finishing with cement mortar 1 : 3 (1 cement : 3 fine sand) as per standard design: In 75 X 75 mm deep chase metre. 260.2 232.32 85.000 19747.321
45 12.22 Making khurras 45 x 45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. Each 266.6 238.04 4.000 952.143
46 13.1.1 12mm cement plaster of mix 1:4( 1 cement :4 fine sand) Sq.m. 294.85 263.26 120.000 31591.071
47 13.2.2 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 Cement : 6 Fine sand) Sq.m. 324.3 289.55 140.000 40537.500
48 13.16.1 6 mm cement plaster of mix 1 : 3 (1 Cement : 3 Fine sand) Sq.m. 253.05 225.94 50.000 11296.875
49 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 Cement : 5 Coarse sand) finished with top layer 6 mm thick cement plaster 1:6 (1 Cement : 6 Fine sand) Sq.m. 442.75 395.31 350.000 138359.375
50 13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers: per bag of 50 kg cement used in the mix 60.55 54.06 44.000 2378.750
51 13.24.2 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In two coats. Sq.m. 967.85 864.15 35.000 30245.313
52 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sq.m. 123.85 110.58 950.000 105051.339
53 13.41.1 Distempering with oil bound washable distemper of approved brand & manufacture to give an even shade. New work (two or more coats) over & including priming coat with cement primer. Sq.m. 162.55 145.13 300.000 43540.179
54 13.60.1 Painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sq.m. 137.85 123.08 300.000 36924.107
55 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.m 162.35 144.96 350.000 50734.375
56 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer. Sq.m. 191.4 170.89 50.000 8544.643
57 13.73.2 Forming groove of uniform size 20mm x 6 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and directions of the Engineer-in-charge metre 63.1 56.34 120.000 6760.714
58 22.7.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies terraces etc. consisting of following operations. a) Applying a slurry coat of neat cement using 2.75 Kg/sq.m. of cement admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken brick /brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 Coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of the junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sq.m of cement admixed with water proofing compound conforming to IS :2645 and approved by Enngineer-in-charge. d) Finishing the top surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order & as directed and specified by the Engineer-in-Charge. With average thickness of 120 mm and minimum thickness at Khurra as 65mm Sq.m. 1522.95 1359.78 200.000 271955.357
59 4.17 Making Plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Sq.m. 681.65 608.62 7.000 4260.313
60 9.147A.5+21.3.2 UPVC sliding window: Supply and installation of UPVC (Unplasticized Polyvinyl Chloride ) windows of sliding type Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) using factory made multi chambered hollow section reinforce with galvanalised steel sheets embeded insie the chambers the sizes of sections for outer frames and sliding shutters to form sliding windows shall be as per approved manufacturers, thickness of sections shall be not less than 2mm(+or – 0.3mm) including supplying and fixing 5mm thick clear float glass of approved make with necessary glazing beading and EPDM gaskets to sliding shutters, all necessary hardwares like rollers, handles, locking system etc. fixing to RCC/ brick walls with necessary screws, rawl plugs, cleats, etc. as required complete as per drawings and directions of Engineer-in-charge. The details of the frame sections shutter sections, mullions, transom or T sections as necessary shall be as per the manufacturers recommendations as given in the technical specification. The windows shall be supplied in the required shade as decided by Engineer in charge.(Total area is to be measured for payment. The rate shall be inclusive of glass and all activities) sqm 12072.45 36.660 442576.017
61 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws .(Item include decorative veneering on both faces as per design approve by EIC) sqm 3086.1 2755.45 30.000 82663.393
Section - II (PHE works) 0.000
1 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 125 x 110 dia uPVC, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous china Orissa patterns W.C pan of size 580x 440 mm with integral type foot rest Each 5781.35 5161.92 2.000 10323.839
2 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid Each 6941.3 6197.59 2.000 12395.179
3 17.7.3 Providing and fixing wash basin with CI / MS brackets , 15 mm CP brass pillar taps, Kingston/Gem/Techno/Parko, 32 mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required. Wash basin size 550 x 400 mm with a pair of 15 mm CP brass pillar tap. Each 2040.85 1822.19 4.000 7288.750
4 17.10.1.4 Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per IS:13983 with CI brackets and stainless steel plug 40 mm, including painting of fittings & brackets cutting and making good the walls wherever required. Kitchen sink with drain board Size 460 x 915 bowl depth 178 mm Each 6008.45 5364.69 1.000 5364.688
5 17.22 Providing and fixing G.I inlet connection for flush pipe connecting with W.C pan Each 131.65 117.54 8.000 940.357
6 17.28.2.1 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe 32 mm dia Each 104.35 93.17 5.000 465.848
7 17.31 Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete. Each 1411.15 1259.96 4.000 5039.821
8 17.33 Providing & fixing 600 x 120 x 5 mm glass shelf with edges round off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws rawl plugs etc. complete Each 942.15 841.21 4.000 3364.821
9 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality, colour and make weighing not less than 88 gms (Prayag or equivalent) Each 204.7 182.77 3.000 548.304
10 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality colour and make (Prayag or equivalent). 600mm long towel rail with total length of 645mm, width 78mm wide and effective height of 88mm, weighing not less than 190gms. Each 600.35 536.03 4.000 2144.107
11 17.70.1 Providing and fixing PTMT Bottle trap for wash basin and sink (Prayag or equivalent): Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighinh not less than 260 gms. Each 325.1 290.27 5.000 1451.339
12 18.10 Providing and fixing GI pipes complete with GI fitting and clamps, including cutting and making good the walls etc. : Internal work -Exposed on wall 0.000
ii 18.10.2 20 mm nominal bore Meter 373.35 333.35 20.000 6666.964
iii 18.10.4 32 mm dia nominal bore Mtrs. 563.6 503.21 25.000 12580.357
iv 18.10.5 40 mm dia nominal bore Mtrs. 725.15 647.46 12.000 7769.464
v 18.10.6 50 mm dia nominal bore Mtrs. 893.2 797.50 12.000 9570.000
13 18.11 Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 0.00 0.000 0.000
ii 18.11.2 20 mm nominal bore Meter 541.1 483.13 10.000 4831.250
14 18.13 Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc complete 0.00 0.000 0.000
15 18.17.3 Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end): 40 mm nominal bore Each 707.3 631.52 1.000 631.518
16 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end) 0.00 0.000 0.000
i 18.19.3.1 Horizontal 40 mm nominal bore Each 815.05 727.72 1.000 727.723
ii 18.19.4.1 Horizontal 50 mm nominal bore Each 1173.65 1047.90 1.000 1047.902
17 18.22.2 Providing and fixing CP brass shower rose with 15 or 20 mm inlet. 150 mm diameter Each 190.1 169.73 3.000 509.196
18 18.38 Painting GI pipes and fittings with synthetic enamel white paint over a ready mixed priming coat both of approved quality for new work (Exposed pipe) 0.000
i 18.38.1 15 mm diameter pipe Meter 16.4 14.64 20.000 292.857
ii 18.38.2 20 mm diameter pipe Meter 19.65 17.54 20.000 350.893
iii 18.38.4 32 mm diameter pipe Meter 30.7 27.41 25.000 685.268
iv 18.38.5 40 mm diameter pipe Meter 36.05 32.19 12.000 386.250
v 18.38.6 50 mm diameter pipe Meter 43.05 38.44 12.000 461.250
19 18.49.1 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore Each 434.2 387.68 6.000 2326.071
20 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. Each 708.4 632.50 12.000 7590.000
21 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Each 594.75 531.03 12.000 6372.321
22 18.53.1 Providing & fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore Each 500.35 446.74 12.000 5360.893
23 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete complete. 25 mm diameter bore Each 399.15 356.38 1.000 356.384
24 18.53.1 Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 A) 15 mm nominal bore 15 mm nominal bore Each 500.35 446.74 8.000 3573.929
25 18.75 Providing and fixing PTMT extension Nipples for watertank pipe, fittings of approved quality, colour and make (Prayag or equivalent) 0.000
i 18.75.1 15 mm nominal bore weighing not less than 32 gms Each 43.05 38.44 4.000 153.750
ii 18.75.3 25 mm nominal bore weighing not less than 62 gms Each 100.55 89.78 1.000 89.777
26 19.4.3.1 Providing & fixing square - mouth SW gully trap grade 'A' complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside). The weight of cover to be not less than 4.50 kg & frame to be not less than 2.70 kg. as per standard design. 180 x 150 mm size P type with common burnt clay FPS (non modular) bricks of class designation 75 Each 2534 2262.50 8.000 18100.000
27 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 11687.1 10434.91 8.000 83479.286
28 19.8.1.1 Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 8127.45 7256.65 2.000 14513.304
29 Supplying, laying, jointing, testing and commissioning approved make UPVC pipes SWR grade B (on wall surface / floor / below ground surface) conforming to IS 13592 with rubber ring joints confirming to IS 5382. The quoted rate shall include necessary fittings like Tees, Bends, Offsets, floor trap with CP brass Jali etc., including M.S angle with G.I clamps complete. 110 mm dia. Total length of Pipes shall be measured in Running meters for payment. only Excavation shall be paid separately. Metre 715.68 40.000 28627.200
30 Supplying, jointing, testing & Commissioning of approved make UPVC pipe SWR grade "A" conforming to IS: 13592 (wall surface / floor / below ground) with rubber ring joints for rain water disposal conforming to IS5382.The quoted rate shall include necessary bends,etc. including M.S angle with G.I clamps complete : 110 mm dia (only Excavation shall be paid separately). Total length of Pipes shall be measured in Running meters for payment. Metre 607.29 50.000 30364.500
31 2.10.1.2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil - Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 417.35 372.63 54.000 20122.232
32 Supplying, installing, testing and commissioning approved make 15 mm CP health faucet with CP flexible tube 1.0 m long, CP crutch, nozzle angular stop cock with wall flange etc.,complete ( Make Jaquar Model No. JAQ 573 or equivalent with low volume water flow of 6 litres / minute for Health Faucet,Angle stop cock JAQ 053,CP Flanges JAQ 107 or any other equivalent). Each 4015.92 2.000 8031.840
33 18.48 Providing and placing on terrace (at all floor levels) polythene water storage tank ISI: 12701 (EACH 1000 LITRE CAPACITY) marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per litre 9.7 8.66 1000.000 8660.714
BOQ for Balance qty construction of C type quarter at Chaibasa S/S. (Electrical Portion)
SECTION-III : ELECTRICAL INSTALLATION & FIXTURES
SL. No. REF. DSR' 21 DESCRIPTION OF ITEM UNIT QTY. (B1- TYPE: 2) BOQ QUANTITY. (C- TYPE: 1) UNIT RATE (Rs.) as per DSR-21 UNIT RATE AMOUNT (C-01)
SUB HEAD- I : WIRING
1 1.8.1 Wiring for light point/ fan point / exhaust fan point/ with 1.5 sq. mm. FR PVC insulated copper conductor single core cable in recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc. as required ( GROUP A) Point 100 694 619.64 61,964 1
2 1.5 Wiring for light / power plug with 2 X 4 sq. mm. FR PVC insulated copper conductor single core conductor in recessed steel conduit alongwith 1 no. 4 sq. mm. FR PVC insulated copper conductor for loop earthing as required. Meter 90 265 236.61 21,295 1
3 1.7.2 Wiring for circuit wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in recessed steel conduit as required: 2 X 2.5 sq. mm. + 1 X 2.5 sq. mm. earth wire Meter 95 229 204.46 19,424 1
4 1.7 Wiring for submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in recessed steel conduit as required: 1
1.7.3 2 X 4 sq. mm. + 1 X 4 sq. mm. earth wire Meter 400 263 234.82 93,929 1
1.7.4 2X 6 sq. mm. + 1 X 6 sq. mm. earth wire Meter 45 356 317.86 14,304 1
5 1.21.2 Supplying and fixing of 25 mm dia medium class PVC conduit along with accessories in recess including cutting the wall and making good the same(for Telephone and TV cable)(14 Gauge GI pull wire to be provided inside the conduit) Meter 275 90 80.36 22,098 1
SUB HEAD - III : ERECTION OF FITTINGS & ACCESSORIES
6 1.22. Supplying and fixing metal box of following sizes in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required. 1
a) 1.22.1 75 mm X 75 mm X 60 mm deep(for Telephone and TV jack) Each 10 140 125.00 1,250 1
b) 1.22.2 100 mm X 100 mm X 60 mm deep(for TV JB) Each 4 160 142.86 571 1
c) 1.22.11 200 mm X 150 mm X 100 mm deep(Inspection Box) Each 1 308 275.00 275 1
7 1.29 Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection,painting etc. as required. Each 10 285 254.46 2,545 1
8 1.30 Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection,painting etc. as required. Each 8 406 362.50 2,900 1
9 1.23.4 Supplying and fixing 3 pin 5/6 amp socket outlet on existing switch box/cover including connections etc. as required. Each 12 58 51.79 621 1
10 1.23.1 Supplying and fixing 5/6 amp piano type switch on existing switch box/cover including connections etc. as required. Each 12 45 40.18 482 1
11 1.34 Supplying and fixing brass batten / angle holder including connection etc. as required Each 8 117 104.46 836 1
12 1.35 Erection of wall bracket / ceiling fittings of all sizes and shapes containing upto 2 GLS lamps per fitting, complete with all accessories including connection etc. as required Each 25 98 87.50 2,188 1
13 1.38 Supplying and fixing call bell/buzzer suitable for D.C./A.C. single phase, 230 volts, complete as required. Each 4 92 82.14 329 1
14 1.41 Installation, Testing and commissioning of pre-wired fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq. mm. FR PVC insulated, copper conductor, single core cable and earthing etc. as required Each 27 168 150.00 4,050 1
15 1.44 Installation, testing and commissioning of ceiling fan and regulator including wiring the down rod of standard length (upto 30cm) with 1.5 sq.mm PVC insulated copper conductor, single core cable etc. as required. Each 12 171 152.68 1,832 1
16 1.49 Numbering of ceiling fan /exhaust fan / flourescent fitting as required Each 47 48 42.86 2,014 1
17 1.50.1 Installation of exhaust fan upto 450mm sweep in the exisiting opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commisssiong etc. as required. Each 8 363 324.11 2,593 1
18 2.18 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps 'C' series SP, MCB, in sheet steel enclosure , in recess, with chained metal cover for socket outlet and complete with connections, testing and commissioning etc. as required. Each 2 1232 1100.00 2,200 1
SUB HEAD - IV : MCB'S & MAIN DISTRIBUTION BOARD :
19 Supplying and fixing 4 way (2 + 12), double door surface / recessed mounting single pole and neutral, pre-wired , sheet steel, MCB distribution board, 240 volts, in recess, complete with loose wire box, terminal blocks,duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB) Each 2 3410.00 6,820 2
20 Supplying and fixing the following in existing MCB DB complete with connections, testing and commissioning etc. as required.
a) Incoming 40 A Double Pole RCBO having a sensitivity current up to 300 mA Each 2 1556.00 3,112 2
b) Outgoing 'C' series 240 V 10 A MCB Each 20 162.00 3,240 2
c) Outgoing 'C' series 240 V 20 A MCB Each 12 59.00 708 2
21 2.21 Providing & fixing MV Danger Notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick and vitreous enamelled white on both side & with inscription in single red colour on front side as required. Each 1 226 201.79 202 1
SUB HEAD - V : EARTHING & LOOP EARTHING
22 5.2 Earthing with G.I. earth pipe 4.5 mtr. Long, 40 mm. dia including accessories , and providing masonry enclosure wit cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required Set 2 5308 4739.29 9,479 1
23 5.10 Providing and fixing 25 mm x 5 mm Copper strip in 40 mm dia GI pipe from earth electrode as required. Meter 20 1224 1092.86 21,857 1
SUB HEAD - VI : LIGHTNING PROTECTION
25 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 1 448 400.00 400 1
26 6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 20 93 83.04 1,661
27 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) Meter 25 104 92.86 2,321
28 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) Meter 10 163 145.54 1,455
29 6.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. Each 1 102 91.07 91
SUB HEAD - VI : -TELEPHONE & TV CONNECTION
30 1.18.2 Supplying and drawing 2 pair , 0.5 sq mm FR PVC insulated copper conductor, unarmoured telephone cable in existing recessed steel conduit as required Meter 135 20.00 17.86 2,411 1
31 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulator, shielded with fine tinned copper braid and protected with PVC sheath in the existing recessed steel conduit Meter 80 33 29.46 2,357 1
32 Supplying and drawing 10 pair , 0.5 sq mm FR PVC insulated copper conductor, unarmoured telephone cable in existing recessed steel conduit as required Meter 20 301.00 6,020 2
33 Supplying and drawing co-axial TV cable RG-11 grade, 0.7 mm solid copper conductor PE insulator, shielded with fine tinned copper braid and protected with PVC sheath in the existing recessed steel conduit Meter 10 74.00 740 2
34 Supplying and fixing of 2 pin telephone socket on existing cover including connection etc. as required Each 10 38.00 380 2
35 Supplying and fixing co-axial Female T.V. jack including making connection, soldering etc. as required. Each 2 49.00 98 2
36 Supplying and fixing telephone tag block of powder coated metal box with locking arrangement complete as required of the following capacity
10 pairs Each 1 516.00 516 2
SUB HEAD - VII : SUPPLY OF FIXTURES
37 1200 mm sweep A.C. ceiling fan of approved make ( Khaitan or equivalent)with double ball bearing motor with all accessories suitable for operation on 230 V single phase, 50 Hz AC supply complete as required. Each 12 2250.00 27,000 2
38 12 inch sweep , 1400 R.P.M 1-Phase A.C. Exhaust fan (Khaitan Make or equivalent) complete with louver/shutter and its all accessories complete as required. Each 8 4006.00 32,048 2
39 Supply of Surface Mounted round, decorative downlighter with HF electronic ballast and translucent diffuser, pre-fitted with flat profile 2G X 15/56 lamp base ( Havells Make CAT No. LHDC71125670 or equivalent reputed Make)(Lamp included) Each 18 1482.00 26,676 2
40 Supply of industrial Bulkhead luminaires for 100 W GLS lamps of Crompton Make IBH1110ES with cast aluminium LM6 body, heat resistant glass cover with MS galvanised wireguard, etc. or equivalent complete as required. Each 2 840.00 1,680 2
41 Supply of decorative ultra slim box fixture with snap-on installers and domestic electronic ballast ( Havells Make CAT No. LHDT18128032 or equivalent reputed Make)( T5 FTL included) Each 24 1076.00 25,824 2
42 Decorative round downlighter luminaire CAT no. LHDC 73122670 of Havels or equivalent make with lamp etc. as required Each 10 1482.00 14,820 2
43 Bulk head fitting CAT no. NXC 101 of Philips make complete with glass cover, wire guard, 60 W lamps etc. as required. Each 10 840.00 8,400 2
44 1 X 4' - 36 W decorative sleek luminaire with electronic ballast complete with all accessories and tube CAT no. LHDF 32136025 Havells or equivalent approved make Each 12 1086.00 13,032 2
45 Decorative ceiling mounted luminaire CAT no. WW BCS 1901 / 1902 / 1903 of Philips or equivalent make with lamp etc. as required (for porch light) Each 1 2798.00 2,798 2
BOQ for Balance qty construction of C type quarter at Chaibasa S/S.(Civil portion)
NAME OF CONTRACT : Construction of C type Quarters at 400/220 kV Chaibasa S/S.
Sl No REF. DSR-2021 Item Description UNIT Rate incl GST UNIT RATE BOQ QUANTITY AMOUNT
SECTION I (CIVIL WORKS)
1 2.8.1 Earth work in excavation by Mechanical Means (Hydralic Excavator) /Manual Means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. Cum 286.85 256.12 50.000 12805.804
2 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides, of the foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. Cum 253.95 226.74 20.000 4534.821
3 2.27 Supply and filling in plinth with local sand under floors including watering, ramming, consolidating and dressing complete. Cum 2161.2 1929.64 4.000 7718.571
4 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos / Lindane emulsifiable concentrate of 20 Percent Litre 200.9 179.38 50.000 8968.750
5 Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE-CONSTRUCTIONAL ANTI-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (Plinth area of the building at ground floor only shall be measured for payment). Chlorpyriphos / Lindane Emulsifiable concentrate 20 Percent with 1 Percent concentration Sqm 78.36 78.36 50.000 3918.000
6 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering : All works upto plinth level. 0.000
I 4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) Cum 6326.05 5648.26 12.000 67779.107
II 4.1.3 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) Cum 7555.05 6745.58 2.000 13491.161
lll 4.1.10 1:5:10 ( 1 Cement: 2 coarse sand : 5 graded stone aggregate 10mm nominal size) Cum 6050.65 5402.37 1.000 5402.366
7 4.12 Extra for providing and mixing water-proofing material in cement concrete work @ 1 Kg per 50 Kgs of cement. Per 50 Kgs of cement 57.15 51.03 5.000 255.134
8 4.2.3 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 Cu.m. 9375.2 8370.71 2.000 16741.429
9 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All works upto Plinth level. 1:1.5:3 (1 Cement : 1.5 Coarse sand : 3 graded stone aggregate 20 mm nominal size) Cu.m. 8364.2 7468.04 3.000 22404.107
10 5.2.2 Reinforced cement concrete work in walls ( any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement. 1:1.5:3 (1 Cement: 1.5 Coarse sand: 3 Graded stone aggregate 20 mm nominal size) Cu.m. 10185.05 9093.79 3.000 27281.384
11 5.3 Reinforced Cement concrete in beams, suspended floors, roofs having slope upto 15 degree, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggr. 20 mm nominal size). Cu.m. 10719.3 9570.80 1.000 9570.804
12 5.9 Centring and shuttering including strutting, propping etc. and removal of form for: 0.000
I 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. Sq.m. 307.95 274.96 20.000 5499.107
II 5.9.2 Walls (any thickness) - Pardie Walls including attached pilasters, buttresses, plinth & string courses etc. Sq.m. 669.55 597.81 30.000 17934.375
III 5.9.3 Suspended floors & Slabs, roofs, landings, balconies and access platform Sq.m. 766.55 684.42 25.000 17110.491
IV 5.9.5 Lintels, beams, plinth beams, girders, bressumers & cantilevers Sq.m. 608.35 543.17 10.000 5431.696
V 5.9.6 Columns, pillars, piers abutments posts & struts Sq.m. 804.25 718.08 5.000 3590.402
VII 5.9.9 Arches, domes, vaults upto 6 m span Sq.m. 1826.25 1630.58 10.000 16305.804
13 5.22.6 Reinforcement for R.C.C. work including straightening, cutting, bending, binding and placing in position complete. Thermo-Mechanically Treated bars Kg. 89.65 80.04 500.000 40022.321
14 6.1.2 Brick work with F.P.S bricks of class designation 75 in foundations & plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand). Cu.m. 6658.25 5944.87 5.000 29724.330
15 6.4.2 Brick work with F.P.S bricks of class designation 75 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand). Cu.m. 8288.35 7400.31 12.000 88803.750
16 6.13.2 Half brick masonary with FPS bricks of class designation 75 in superstructure above plinth level up to floor v level.Cement mortar 1:4(1cement:4 coarse sand). Sq.m. 1018.05 908.97 100.000 90897.321
17 6.15 Extra for providing and placing in position 2 Nos., 6mm dia M.S. bars at every third course of half brick masonry (with F.P.S. bricks). Sq.m. 86.45 77.19 100.000 7718.750
18 9.129 Providing & fixing cup board of shutters 25mm thick, with pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade I Type II), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. Sq.m. 1982.7 1770.27 18.000 31864.821
19 9.132 Providing and fixing aluminium, U beading of required size to pre-laminated / flush door shutter including fixing etc. complete as per direction of Engineer - in - charge. Kg. 530.3 473.48 20.000 9469.643
20 9.27.2.1.1 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :30 mm thick shutterswith ISI marked M.S. pressed butt hinges bright finished of required size : Second class teak wood . Sqm 3863.65 3449.69 35.000 120739.063
21 21.1 Providing ang fixing aluminium work for doors, windows, ventilators, and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust fee, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing, panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : 0.000
i Avg. of 21.1.1.2 & 21.1.2.2 For fixed portion, shutters of doors, windows & ventilators including providing & fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 515.55 460.31 145.000 66745.313
22 10.29.1 Providing and fixing fly proof wire gaauge to Aluminium frame window, celestory wndows & doors with MS flat 15x3mm and nuts & bolts etc complete fittings: Galvanised MS wire gauge with 0.63 mm dia wire and 1.4 mm aperature on both sides. Sqm 732.2 653.75 45.000 29418.750
23 9.43 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. metre 626.55 559.42 50.000 27970.982
24 9.79.2 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers including necessary screws etc. complete (best make of approved quality): 50 mm Each 306.4 273.57 12.000 3282.857
25 9.80 Providing and fixing 50 mm bright finished brass cupboard or wardrobe knob of approved quality with necessary screws. Each 63.65 56.83 24.000 1363.929
26 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 300 x 16 mm Each 260.3 232.41 11.000 2556.518
27 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 0.000
28 9.100 Providing and fixing aluminium handles ISI marked anodised anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 0.000
29 9.101.2 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour & shade with necessary screws etc. complete : Twin rubber stopper Each 62.25 55.58 16.000 889.286
30 9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI Marked, with six levers and a pair of Anodised [Anodic coating not less than Grade AC 10 as per IS:1868 ] Aluminium lever handles with necessary screws etc. complete (Best make of approved quality) Each 739.8 660.54 12.000 7926.429
31 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20 X 10 X 2mm and braced with flat iron diagonals 20 X 5 mm size with top and bottom rail of T-iron 40 X 40 X 6 mm, with 40 mm dia. steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Sq.m. 9397.35 8390.49 5.000 41952.455
32 10.18 Providing and fixing circular/hexagonal cast iron or MS sheet box for ceiling fan clamp of internal dia 140 mm, 73 mm height , top lid of 1.5mm thick M.S sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron / M.S . sheet box by means of 3.3mm dia round headed screws,one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing. Each 185.2 165.36 16.000 2645.714
33 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kgs. 197.7 176.52 550.000 97084.821
34 10.25.2 Steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required. In gratings, frames, guard bars, ladders, railings, brackets, gates, grills and similar works. Kgs. 142.3 127.05 150.000 19058.036
35 Providing and erecting railing in stainless steel with hand rail out of 50mm dia. stainless steel medium hollow pipe and 25mm dia. vertcal medium hollow pipes and 25mm dia vertical medium hollow pipes at a spacing of 200 mm c/c with 40 x 6 S.S. continuous straps to be fixed to RCC padadis and also at 0.6 m level. The total height of the railing shall be 80 cms above the RCC padadi. RMT 498.02 25.000 12450.500
36 8.2 Providing and fixing 18 mm thickgang saw cut mirror polished [premoulded and prepolished] machine cut for kitchen platforms, vanity counters, window sils, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. 0.000
i 8.2.2.2 Granite of any colour and shade: Area of slab over 0.50 sq.m. Sq.m. 4425.35 3951.21 8.000 31609.643
ii 8.2.1.1 Rajnagar plain White marble/udaipur green marble/zebra black marble:Area of slab up to 0.50 sq.m. Sq.m. 2906.45 2595.04 20.000 51900.893
37 Avg. of 8.3.1 & 8.3.2 Extra for providing edge moulding to 18mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer - in - Charge. Marble / Granite work RMT 331.875 296.32 50.000 14815.848
38 11.37A Providing and Fixing 1st quality ceramic glazed tiles conforming to IS 15622 (Thickness to be specified by the Manufacturer ) of Approved Make in all colours, shades except begundy, bottle-green, black of any size as approved by the Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement mortar 1:3 (1 Cement:3 Coarse Sand) and jointing with grey cement slurry @ 3.3 kg per sq m including pointing in white cement mixed with pigment of matching shade complete. Sq.m. 938.5 837.95 140.000 117312.500
39 11.37 Providing and Laying ceramic glazed floor tiles 300 mm X 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of Approved make in all colours such as White, Ivory, grey, Fume, Red Brown, laid on 20 mm thick bed of Cement mortar 1:4 (1 Cement:4 Coarse Sand) including pointing the joints with white cement and matching pigments etc complete. Sq.m. 935.6 835.36 40.000 33414.286
40 11.41.2 Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of Tile 600 x 600 mm. Sqm. 1416.65 1264.87 200.000 252973.214
41 11.46.2 Providing and laying Vitrified tiles in different sizes (thichness to be specified by manufacturer), with waterabsorption less than 0.08% and conforming to I.S. 15622 of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm. Sqm. 1466.5 1309.38 15.000 19640.625
42 12.21.1 Providing gola 75 X 75 mm in cement concrete 1 : 2 : 4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 10 mm and down gauge) including finishing with cement mortar 1 : 3 (1 cement : 3 fine sand) as per standard design: In 75 X 75 mm deep chase metre. 260.2 232.32 45.000 10454.464
43 12.22 Making khurras 45 x 45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. Each 266.6 238.04 4.000 952.143
44 13.1.1 12mm cement plaster of mix 1:4( 1 cement :4 fine sand) Sq.m. 294.85 263.26 450.000 118466.518
45 13.2.2 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 Cement : 6 Fine sand) Sq.m. 324.3 289.55 300.000 86866.071
46 13.16.1 6 mm cement plaster of mix 1 : 3 (1 Cement : 3 Fine sand) Sq.m. 253.05 225.94 30.000 6778.125
47 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 Cement : 5 Coarse sand) finished with top layer 6 mm thick cement plaster 1:6 (1 Cement : 6 Fine sand) Sq.m. 442.75 395.31 500.000 197656.250
48 13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers: per bag of 50 kg cement used in the mix 60.55 54.06 63.000 3405.938
49 13.24.2 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In two coats. Sq.m. 967.85 864.15 20.000 17283.036
50 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sq.m. 123.85 110.58 1450.000 160341.518
51 13.41.1 Distempering with oil bound washable distemper of approved brand & manufacture to give an even shade. New work (two or more coats) over & including priming coat with cement primer. Sq.m. 162.55 145.13 1000.000 145133.929
52 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.m 162.35 144.96 450.000 65229.911
53 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer. Sq.m. 191.4 170.89 300.000 51267.857
54 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C, kitchen and the like coonsisting of : (i) 1st course of applying cement slurry @4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster1:3 (1cement: 3 course sand)mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per sqm of area. (iv) IVth course of 400 micron thick PVC sheet.( Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumin @1.7 kg/sq.m. Sq.m 774.25 691.29 25.000 17282.366
55 22.7.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies terraces etc. consisting of following operations. a) Applying a slurry coat of neat cement using 2.75 Kg/sq.m. of cement admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken brick /brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 Coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of the junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sq.m of cement admixed with water proofing compound conforming to IS :2645 and approved by Enngineer-in-charge. d) Finishing the top surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order & as directed and specified by the Engineer-in-Charge. With average thickness of 120 mm and minimum thickness at Khurra as 65mm Sq.m. 1522.95 1359.78 220.000 299150.893
56 4.17 Making Plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Sq.m. 681.65 608.62 1.130 687.736
57 9.147A.5+21.3.2 UPVC sliding window: Supply and installation of UPVC (Unplasticized Polyvinyl Chloride ) windows of sliding type Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) using factory made multi chambered hollow section reinforce with galvanalised steel sheets embeded insie the chambers the sizes of sections for outer frames and sliding shutters to form sliding windows shall be as per approved manufacturers, thickness of sections shall be not less than 2mm(+or – 0.3mm) including supplying and fixing 5mm thick clear float glass of approved make with necessary glazing beading and EPDM gaskets to sliding shutters, all necessary hardwares like rollers, handles, locking system etc. fixing to RCC/ brick walls with necessary screws, rawl plugs, cleats, etc. as required complete as per drawings and directions of Engineer-in-charge. The details of the frame sections shutter sections, mullions, transom or T sections as necessary shall be as per the manufacturers recommendations as given in the technical specification. The windows shall be supplied in the required shade as decided by Engineer in charge.(Total area is to be measured for payment. The rate shall be inclusive of glass and all activities) 12072.45 60.000 724347.000
58 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws .(Item include decorative veneering on both faces as per design approve by EIC) sqm 3086.1 2755.45 40.000 110217.857
Section - II (PHE works)
1 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 125 x 110 dia uPVC, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous china Orissa patterns W.C pan of size 580x 440 mm with integral type foot rest Each 5781.35 5161.92 2.000 10323.839
2 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid Each 6941.3 6197.59 4.000 24790.357
3 17.7.3 Providing and fixing wash basin with CI / MS brackets , 15 mm CP brass pillar taps, Kingston/Gem/Techno/Parko, 32 mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required. Wash basin size 550 x 400 mm with a pair of 15 mm CP brass pillar tap. Each 2040.85 1822.19 8.000 14577.500
4 17.10.1.4 Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per IS:13983 with CI brackets and stainless steel plug 40 mm, including painting of fittings & brackets cutting and making good the walls wherever required. Kitchen sink with drain board Size 460 x 915 bowl depth 178 mm Each 6008.45 5364.69 2.000 10729.375
5 17.22 Providing and fixing G.I inlet connection for flush pipe connecting with W.C pan Each 131.65 117.54 12.000 1410.536
6 17.28.2.1 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe 32 mm dia Each 104.35 93.17 10.000 931.696
7 17.31 Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete. Each 1411.15 1259.96 6.000 7559.732
8 17.33 Providing & fixing 600 x 120 x 5 mm glass shelf with edges round off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws rawl plugs etc. complete Each 942.15 841.21 8.000 6729.643
9 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality, colour and make weighing not less than 88 gms (Prayag or equivalent) Each 204.7 182.77 8.000 1462.143
10 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality colour and make (Prayag or equivalent). 600mm long towel rail with total length of 645mm, width 78mm wide and effective height of 88mm, weighing not less than 190gms. Each 600.35 536.03 8.000 4288.214
11 17.70.1 Providing and fixing PTMT Bottle trap for wash basin and sink (Prayag or equivalent): Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighinh not less than 260 gms. Each 325.1 290.27 10.000 2902.679
12 18.10 Providing and fixing GI pipes complete with GI fitting and clamps, including cutting and making good the walls etc. : Internal work -Exposed on wall 0.000
ii 18.10.2 20 mm nominal bore Meter 373.35 333.35 20.000 6666.964
iii 18.10.4 32 mm dia nominal bore Mtrs. 563.6 503.21 35.000 17612.500
iv 18.10.5 40 mm dia nominal bore Mtrs. 725.15 647.46 15.000 9711.830
v 18.10.6 50 mm dia nominal bore Mtrs. 893.2 797.50 10.000 7975.000
13 18.11 Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 0.000
ii 18.11.2 20 mm nominal bore Meter 541.1 483.13 10.000 4831.250
14 18.13 Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc complete 0.000
15 18.17.3 Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end): 40 mm nominal bore Each 707.3 631.52 1.000 631.518
16 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end) 0.00 0.000 0.000
i 18.19.3.1 Horizontal 40 mm nominal bore Each 815.05 727.72 1.000 727.723
ii 18.19.4.1 Horizontal 50 mm nominal bore Each 1173.65 1047.90 1.000 1047.902
17 18.22.2 Providing and fixing CP brass shower rose with 15 or 20 mm inlet. 150 mm diameter Each 190.1 169.73 6.000 1018.393
18 18.38 Painting GI pipes and fittings with synthetic enamel white paint over a ready mixed priming coat both of approved quality for new work (Exposed pipe) 0.000
i 18.38.1 15 mm diameter pipe Meter 16.4 14.64 25.000 366.071
ii 18.38.2 20 mm diameter pipe Meter 19.65 17.54 20.000 350.893
iii 18.38.4 32 mm diameter pipe Meter 30.7 27.41 25.000 685.268
iv 18.38.5 40 mm diameter pipe Meter 36.05 32.19 15.000 482.813
v 18.38.6 50 mm diameter pipe Meter 43.05 38.44 15.000 576.563
19 18.49.1 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore Each 434.2 387.68 6.000 2326.071
20 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. Each 708.4 632.50 12.000 7590.000
21 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Each 594.75 531.03 12.000 6372.321
22 18.53.1 Providing & fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore Each 500.35 446.74 12.000 5360.893
23 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete complete. 25 mm diameter bore Each 399.15 356.38 1.000 356.384
24 18.53.1 Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 A) 15 mm nominal bore 15 mm nominal bore Each 500.35 446.74 8.000 3573.929
25 18.75 Providing and fixing PTMT extension Nipples for watertank pipe, fittings of approved quality, colour and make (Prayag or equivalent) 0.000
i 18.75.1 15 mm nominal bore weighing not less than 32 gms Each 43.05 38.44 4.000 153.750
ii 18.75.3 25 mm nominal bore weighing not less than 62 gms Each 100.55 89.78 1.000 89.777
26 19.4.3.1 Providing & fixing square - mouth SW gully trap grade 'A' complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside). The weight of cover to be not less than 4.50 kg & frame to be not less than 2.70 kg. as per standard design. 180 x 150 mm size P type with common burnt clay FPS (non modular) bricks of class designation 75 Each 2534 2262.50 8.000 18100.000
27 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 11687.1 10434.91 14.000 146088.750
28 19.8.1.1 Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 8127.45 7256.65 3.500 25398.281
29 Supplying, laying, jointing, testing and commissioning approved make UPVC pipes SWR grade B (on wall surface / floor / below ground surface) conforming to IS 13592 with rubber ring joints confirming to IS 5382. The quoted rate shall include necessary fittings like Tees, Bends, Offsets, floor trap with CP brass Jali etc., including M.S angle with G.I clamps complete. 110 mm dia. Total length of Pipes shall be measured in Running meters for payment. only Excavation shall be paid separately. Metre 715.68 715.68 60.000 42940.800
30 Supplying, jointing, testing & Commissioning of approved make UPVC pipe SWR grade "A" conforming to IS: 13592 (wall surface / floor / below ground) with rubber ring joints for rain water disposal conforming to IS5382.The quoted rate shall include necessary bends,etc. including M.S angle with G.I clamps complete : 110 mm dia (only Excavation shall be paid separately). Total length of Pipes shall be measured in Running meters for payment. Metre 607.29 607.29 50.000 30364.500
31 2.10.1.2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil - Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 417.35 372.63 66.000 24593.839
32 Supplying, installing, testing and commissioning approved make 15 mm CP health faucet with CP flexible tube 1.0 m long, CP crutch, nozzle angular stop cock with wall flange etc.,complete ( Make Jaquar Model No. JAQ 573 or equivalent with low volume water flow of 6 litres / minute for Health Faucet,Angle stop cock JAQ 053,CP Flanges JAQ 107 or any other equivalent). Each 4015.92 4015.92 4.000 16063.680
33 18.48 Providing and placing on terrace (at all floor levels) polythene water storage tank ISI: 12701 (EACH 1000 LITRE CAPACITY) marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per litre 9.7 8.66 2000.000 17321.429
BOQ for Balance qty of construction of B3 type quarter at Chaibasa S/S. (Electrical Portion)
SECTION-III : ELECTRICAL INSTALLATION & FIXTURES
SL. No. REF. DSR' 18 DESCRIPTION OF ITEM UNIT QTY. (B1- TYPE: 2) BOQ QUANTITY. (B3- TYPE: 1) UNIT RATE (Rs.) as per DSR-18 UNIT RATE AMOUNT (D-01)
SUB HEAD- I : WIRING
1 1.8.1 Wiring for light point/ fan point / exhaust fan point/ with 1.5 sq. mm. FR PVC insulated copper conductor single core cable in recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc. as required ( GROUP A) Point 150 694 619.64 92,946 1
2 1.5 Wiring for light / power plug with 2 X 4 sq. mm. FR PVC insulated copper conductor single core conductor in recessed steel conduit alongwith 1 no. 4 sq. mm. FR PVC insulated copper conductor for loop earthing as required. Meter 160 265 236.61 37,857 1
3 1.7.2 Wiring for circuit wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in recessed steel conduit as required: 2 X 2.5 sq. mm. + 1 X 2.5 sq. mm. earth wire Meter 150 229 204.46 30,670 1
4 1.7 Wiring for submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in recessed steel conduit as required: 0 1
1.7.3 2 X 4 sq. mm. + 1 X 4 sq. mm. earth wire Meter 500 263 234.82 117,411 1
1.7.4 2X 6 sq. mm. + 1 X 6 sq. mm. earth wire Meter 60 356 317.86 19,071 1
5 1.21.2 Supplying and fixing of 25 mm dia medium class PVC conduit along with accessories in recess including cutting the wall and making good the same(for Telephone and TV cable)(14 Gauge GI pull wire to be provided inside the conduit) Meter 325 90 80.36 26,116 1
SUB HEAD - III : ERECTION OF FITTINGS & ACCESSORIES 0
6 1.22. Supplying and fixing metal box of following sizes in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required. 0 1
a) 1.22.1 75 mm X 75 mm X 60 mm deep(for Telephone and TV jack) Each 20 140 125.00 2,500 1
b) 1.22.2 100 mm X 100 mm X 60 mm deep(for TV JB) Each 8 160 142.86 1,143 1
c) 1.22.11 200 mm X 150 mm X 100 mm deep(Inspection Box) Each 1 308 275.00 275 1
7 1.29 Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection,painting etc. as required. Each 16 285 254.46 4,071 1
8 1.30 Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection,painting etc. as required. Each 12 406 362.50 4,350 1
9 1.23.4 Supplying and fixing 3 pin 5/6 amp socket outlet on existing switch box/cover including connections etc. as required. Each 20 58 51.79 1,036 1
10 1.23.1 Supplying and fixing 5/6 amp piano type switch on existing switch box/cover including connections etc. as required. Each 20 45 40.18 804 1
11 1.34 Supplying and fixing brass batten / angle holder including connection etc. as required Each 12 117 104.46 1,254 1
12 1.35 Erection of wall bracket / ceiling fittings of all sizes and shapes containing upto 2 GLS lamps per fitting, complete with all accessories including connection etc. as required Each 44 98 87.50 3,850 1
13 1.38 Supplying and fixing call bell/buzzer suitable for D.C./A.C. single phase, 230 volts, complete as required. Each 4 92 82.14 329 1
14 1.41 Installation, Testing and commissioning of pre-wired fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq. mm. FR PVC insulated, copper conductor, single core cable and earthing etc. as required Each 48 168 150.00 7,200 1
15 1.44 Installation, testing and commissioning of ceiling fan and regulator including wiring the down rod of standard length (upto 30cm) with 1.5 sq.mm PVC insulated copper conductor, single core cable etc. as required. Each 24 171 152.68 3,664 1
16 1.49 Numbering of ceiling fan /exhaust fan / flourescent fitting as required Each 84 48 42.86 3,600 1
17 1.50.1 Installation of exhaust fan upto 450mm sweep in the exisiting opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commisssiong etc. as required. Each 12 363 324.11 3,889 1
18 2.18 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps 'C' series SP, MCB, in sheet steel enclosure , in recess, with chained metal cover for socket outlet and complete with connections, testing and commissioning etc. as required. Each 4 1232 1100.00 4,400 1
SUB HEAD - IV : MCB'S & MAIN DISTRIBUTION BOARD : 0
19 Supplying and fixing 4 way (2 + 12), double door surface / recessed mounting single pole and neutral, pre-wired , sheet steel, MCB distribution board, 240 volts, in recess, complete with loose wire box, terminal blocks,duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB) Each 4 3410.00 13,640 2
20 Supplying and fixing the following in existing MCB DB complete with connections, testing and commissioning etc. as required. 0
a) Incoming 40 A Double Pole RCBO having a sensitivity current up to 300 mA Each 4 1556.00 6,224 2
b) Outgoing 'C' series 240 V 10 A MCB Each 40 162.00 6,480 2
c) Outgoing 'C' series 240 V 20 A MCB Each 20 59.00 1,180 2
21 2.21 Providing & fixing MV Danger Notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick and vitreous enamelled white on both side & with inscription in single red colour on front side as required. Each 1 226 201.79 202 1
SUB HEAD - V : EARTHING & LOOP EARTHING 0
22 5.2 Earthing with G.I. earth pipe 4.5 mtr. Long, 40 mm. dia including accessories , and providing masonry enclosure wit cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required Set 2 5308 4739.29 9,479 1
23 5.10 Providing and fixing 25 mm x 5 mm Copper strip in 40 mm dia GI pipe from earth electrode as required. Meter 20 1224 1092.86 21,857 1
SUB HEAD - VI : LIGHTNING PROTECTION 0
25 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 1 448 400.00 400 1
26 6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 25 93 83.04 2,076
27 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) Meter 25 104 92.86 2,321
28 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) Meter 10 163 145.54 1,455
29 6.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. Each 1 102 91.07 91
SUB HEAD - VI : -TELEPHONE & TV CONNECTION 0
30 1.18.2 Supplying and drawing 2 pair , 0.5 sq mm FR PVC insulated copper conductor, unarmoured telephone cable in existing recessed steel conduit as required Meter 210 20.00 17.86 3,750 1
31 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulator, shielded with fine tinned copper braid and protected with PVC sheath in the existing recessed steel conduit Meter 120 33 29.46 3,536 1
32 Supplying and drawing 10 pair , 0.5 sq mm FR PVC insulated copper conductor, unarmoured telephone cable in existing recessed steel conduit as required Meter 20 301.00 6,020 2
33 Supplying and drawing co-axial TV cable RG-11 grade, 0.7 mm solid copper conductor PE insulator, shielded with fine tinned copper braid and protected with PVC sheath in the existing recessed steel conduit Meter 20 74.00 1,480 2
34 Supplying and fixing of 2 pin telephone socket on existing cover including connection etc. as required Each 16 38.00 608 2
35 Supplying and fixing co-axial Female T.V. jack including making connection, soldering etc. as required. Each 4 49.00 196 2
36 Supplying and fixing telephone tag block of powder coated metal box with locking arrangement complete as required of the following capacity 0
10 pairs Each 1 516.00 516 2
SUB HEAD - VII : SUPPLY OF FIXTURES 0
37 1200 mm sweep A.C. ceiling fan of approved make ( Khaitan or equivalent)with double ball bearing motor with all accessories suitable for operation on 230 V single phase, 50 Hz AC supply complete as required. Each 20 2250.00 45,000 2
38 12 inch sweep , 1400 R.P.M 1-Phase A.C. Exhaust fan (Khaitan Make or equivalent) complete with louver/shutter and its all accessories complete as required. Each 12 4006.00 48,072 2
39 Supply of Surface Mounted round, decorative downlighter with HF electronic ballast and translucent diffuser, pre-fitted with flat profile 2G X 15/56 lamp base ( Havells Make CAT No. LHDC71125670 or equivalent reputed Make)(Lamp included) Each 32 1482.00 47,424 2
40 Supply of industrial Bulkhead luminaires for 100 W GLS lamps of Crompton Make IBH1110ES with cast aluminium LM6 body, heat resistant glass cover with MS galvanised wireguard, etc. or equivalent complete as required. Each 4 840.00 3,360 2
41 Supply of decorative ultra slim box fixture with snap-on installers and domestic electronic ballast ( Havells Make CAT No. LHDT18128032 or equivalent reputed Make)( T5 FTL included) Each 48 1076.00 51,648 2
42 Decorative round downlighter luminaire CAT no. LHDC 73122670 of Havels or equivalent make with lamp etc. as required Each 10 1482.00 14,820 2
43 Bulk head fitting CAT no. NXC 101 of Philips make complete with glass cover, wire guard, 60 W lamps etc. as required. Each 10 840.00 8,400 2
44 1 X 4' - 36 W decorative sleek luminaire with electronic ballast complete with all accessories and tube CAT no. LHDF 32136025 Havells or equivalent approved make Each 12 1086.00 13,032 2
45 Decorative ceiling mounted luminaire CAT no. WW BCS 1901 / 1902 / 1903 of Philips or equivalent make with lamp etc. as required (for porch light) Each 1 2798.00 2,798 2
BOQ for Balance qty of construction of B3 type quarter at Chaibasa S/S. (civil portion)
NAME OF CONTRACT : Construction of B3 type Quarters at 400/220 kV Chaibasa S/S.
Sl No REF. DSR-2021 Item Description UNIT Rate incl GST UNIT RATE BOQ QUANTITY AMOUNT
SECTION I (CIVIL WORKS)
1 2.8.1 Earth work in excavation by Mechanical Means (Hydralic Excavator) /Manual Means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. Cum 286.85 256.12 50.000 12805.804
2 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides, of the foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. Cum 253.95 226.74 10.000 2267.411
3 2.27 Supply and filling in plinth with local sand under floors including watering, ramming, consolidating and dressing complete. Cum 2161.2 1929.64 5.000 9648.214
4 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos / Lindane emulsifiable concentrate of 20 Percent Litre 200.9 179.38 50.000 8968.750
5 Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE-CONSTRUCTIONAL ANTI-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (Plinth area of the building at ground floor only shall be measured for payment). Chlorpyriphos / Lindane Emulsifiable concentrate 20 Percent with 1 Percent concentration Sqm 78.36 78.36 30.000 2350.800
6 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering : All works upto plinth level. 0.000
I 4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) Cum 6326.05 5648.26 15.000 84723.884
II 4.1.3 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) Cum 7555.05 6745.58 1.000 6745.580
lll 4.1.10 1:5:10 ( 1 Cement: 2 coarse sand : 5 graded stone aggregate 10mm nominal size) Cum 6050.65 5402.37 1.000 5402.366
7 4.12 Extra for providing and mixing water-proofing material in cement concrete work @ 1 Kg per 50 Kgs of cement. Per 50 Kgs of cement 57.15 51.03 5.000 255.134
8 4.2.3 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 Cu.m. 9375.2 8370.71 2.000 16741.429
9 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All works upto Plinth level. 1:1.5:3 (1 Cement : 1.5 Coarse sand : 3 graded stone aggregate 20 mm nominal size) Cu.m. 8364.2 7468.04 2.000 14936.071
10 5.2.2 Reinforced cement concrete work in walls ( any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement. 1:1.5:3 (1 Cement: 1.5 Coarse sand: 3 Graded stone aggregate 20 mm nominal size) Cu.m. 10185.05 9093.79 18.000 163688.304
11 5.3 Reinforced Cement concrete in beams, suspended floors, roofs having slope upto 15 degree, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggr. 20 mm nominal size). Cu.m. 10719.3 9570.80 38.000 363690.536
12 5.9 Centring and shuttering including strutting, propping etc. and removal of form for: 0.000
I 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. Sq.m. 307.95 274.96 15.000 4124.330
II 5.9.2 Walls (any thickness) - Pardie Walls including attached pilasters, buttresses, plinth & string courses etc. Sq.m. 669.55 597.81 50.000 29890.625
III 5.9.3 Suspended floors & Slabs, roofs, landings, balconies and access platform Sq.m. 766.55 684.42 200.000 136883.929
IV 5.9.5 Lintels, beams, plinth beams, girders, bressumers & cantilevers Sq.m. 608.35 543.17 200.000 108633.929
V 5.9.6 Columns, pillars, piers abutments posts & struts Sq.m. 804.25 718.08 120.000 86169.643
VI 5.9.7 Stairs (excluding landings) except spiral staircases. Sq.m. 657.75 587.28 20.000 11745.536
VII 5.9.9 Arches, domes, vaults upto 6 m span Sq.m. 1826.25 1630.58 10.000 16305.804
X 5.9.19 Weather shade, chajjas, corbels etc. including edges. Sq.m. 814.95 727.63 4.000 2910.536
13 5.22.6 Reinforcement for R.C.C. work including straightening, cutting, bending, binding and placing in position complete. Thermo-Mechanically Treated bars Kg. 89.65 80.04 8000.000 640357.143
14 6.1.2 Brick work with F.P.S bricks of class designation 75 in foundations & plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand). Cu.m. 6658.25 5944.87 5.000 29724.330
15 6.4.2 Brick work with F.P.S bricks of class designation 75 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand). Cu.m. 8288.35 7400.31 95.000 703029.688
16 6.13.2 Half brick masonary with FPS bricks of class designation 75 in superstructure above plinth level up to floor v level.Cement mortar 1:4(1cement:4 coarse sand). Sq.m. 1018.05 908.97 240.000 218153.571
17 6.15 Extra for providing and placing in position 2 Nos., 6mm dia M.S. bars at every third course of half brick masonry (with F.P.S. bricks). Sq.m. 86.45 77.19 240.000 18525.000
18 9.129 Providing & fixing cup board of shutters 25mm thick, with pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade I Type II), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. Sq.m. 1982.7 1770.27 25.000 44256.696
19 9.132 Providing and fixing aluminium, U beading of required size to pre-laminated / flush door shutter including fixing etc. complete as per direction of Engineer - in - charge. Kg. 530.3 473.48 27.000 12784.018
20 9.27.2.1.1 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :30 mm thick shutterswith ISI marked M.S. pressed butt hinges bright finished of required size : Second class teak wood . Sqm 3863.65 3449.69 31.000 106940.313
21 21.1 Providing ang fixing aluminium work for doors, windows, ventilators, and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust fee, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing, panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : 0.000
i Avg. of 21.1.1.2 & 21.1.2.2 For fixed portion, shutters of doors, windows & ventilators including providing & fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 515.55 460.31 335.000 154204.688
22 10.29.1 Providing and fixing fly proof wire gaauge to Aluminium frame window, celestory wndows & doors with MS flat 15x3mm and nuts & bolts etc complete fittings: Galvanised MS wire gauge with 0.63 mm dia wire and 1.4 mm aperature on both sides. Sqm 732.2 653.75 82.000 53607.500
23 9.43 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. metre 626.55 559.42 65.000 36362.277
24 9.79.2 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers including necessary screws etc. complete (best make of approved quality): 50 mm Each 306.4 273.57 16.000 4377.143
25 9.80 Providing and fixing 50 mm bright finished brass cupboard or wardrobe knob of approved quality with necessary screws. Each 63.65 56.83 32.000 1818.571
26 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 300 x 16 mm Each 260.3 232.41 22.000 5113.036
27 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 0.000
28 9.100 Providing and fixing aluminium handles ISI marked anodised anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 0.000
29 9.101.2 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour & shade with necessary screws etc. complete : Twin rubber stopper Each 62.25 55.58 20.000 1111.607
30 9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI Marked, with six levers and a pair of Anodised [Anodic coating not less than Grade AC 10 as per IS:1868 ] Aluminium lever handles with necessary screws etc. complete (Best make of approved quality) Each 739.8 660.54 16.000 10568.571
31 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20 X 10 X 2mm and braced with flat iron diagonals 20 X 5 mm size with top and bottom rail of T-iron 40 X 40 X 6 mm, with 40 mm dia. steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Sq.m. 9397.35 8390.49 4.000 33561.964
32 10.18 Providing and fixing circular/hexagonal cast iron or MS sheet box for ceiling fan clamp of internal dia 140 mm, 73 mm height , top lid of 1.5mm thick M.S sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron / M.S . sheet box by means of 3.3mm dia round headed screws,one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing. Each 185.2 165.36 28.000 4630.000
33 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kgs. 197.7 176.52 950.000 167691.964
34 10.25.2 Steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required. In gratings, frames, guard bars, ladders, railings, brackets, gates, grills and similar works. Kgs. 142.3 127.05 300.000 38116.071
35 Providing and erecting railing in stainless steel with hand rail out of 50mm dia. stainless steel medium hollow pipe and 25mm dia. vertcal medium hollow pipes and 25mm dia vertical medium hollow pipes at a spacing of 200 mm c/c with 40 x 6 S.S. continuous straps to be fixed to RCC padadis and also at 0.6 m level. The total height of the railing shall be 80 cms above the RCC padadi. RMT 498.02 20.000 9960.400
36 8.2 Providing and fixing 18 mm thickgang saw cut mirror polished [premoulded and prepolished] machine cut for kitchen platforms, vanity counters, window sils, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. 0.000
i 8.2.2.2 Granite of any colour and shade: Area of slab over 0.50 sq.m. Sq.m. 4425.35 3951.21 13.000 51365.670
ii 8.2.1.1 Rajnagar plain White marble/udaipur green marble/zebra black marble:Area of slab up to 0.50 sq.m. Sq.m. 2906.45 2595.04 35.000 90826.563
37 Avg. of 8.3.1 & 8.3.2 Extra for providing edge moulding to 18mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer - in - Charge. Marble / Granite work RMT 331.875 296.32 50.000 14815.848
38 11.37A Providing and Fixing 1st quality ceramic glazed tiles conforming to IS 15622 (Thickness to be specified by the Manufacturer ) of Approved Make in all colours, shades except begundy, bottle-green, black of any size as approved by the Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement mortar 1:3 (1 Cement:3 Coarse Sand) and jointing with grey cement slurry @ 3.3 kg per sq m including pointing in white cement mixed with pigment of matching shade complete. Sq.m. 938.5 837.95 245.000 205296.875
39 11.37 Providing and Laying ceramic glazed floor tiles 300 mm X 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of Approved make in all colours such as White, Ivory, grey, Fume, Red Brown, laid on 20 mm thick bed of Cement mortar 1:4 (1 Cement:4 Coarse Sand) including pointing the joints with white cement and matching pigments etc complete. Sq.m. 935.6 835.36 65.000 54298.214
40 11.41.2 Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of Tile 600 x 600 mm. Sqm. 1416.65 1264.87 350.000 442703.125
41 11.46.2 Providing and laying Vitrified tiles in different sizes (thichness to be specified by manufacturer), with waterabsorption less than 0.08% and conforming to I.S. 15622 of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm. Sqm. 1466.5 1309.38 25.000 32734.375
42 12.21.1 Providing gola 75 X 75 mm in cement concrete 1 : 2 : 4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 10 mm and down gauge) including finishing with cement mortar 1 : 3 (1 cement : 3 fine sand) as per standard design: In 75 X 75 mm deep chase metre. 260.2 232.32 80.000 18585.714
43 12.22 Making khurras 45 x 45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. Each 266.6 238.04 4.000 952.143
44 13.1.1 12mm cement plaster of mix 1:4( 1 cement :4 fine sand) Sq.m. 294.85 263.26 725.000 190862.723
45 13.2.2 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 Cement : 6 Fine sand) Sq.m. 324.3 289.55 400.000 115821.429
46 13.16.1 6 mm cement plaster of mix 1 : 3 (1 Cement : 3 Fine sand) Sq.m. 253.05 225.94 450.000 101671.875
47 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 Cement : 5 Coarse sand) finished with top layer 6 mm thick cement plaster 1:6 (1 Cement : 6 Fine sand) Sq.m. 442.75 395.31 900.000 355781.250
48 13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers: per bag of 50 kg cement used in the mix 60.55 54.06 113.000 6109.063
49 13.24.2 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In two coats. Sq.m. 967.85 864.15 35.000 30245.313
50 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sq.m. 123.85 110.58 2475.000 273686.384
51 13.41.1 Distempering with oil bound washable distemper of approved brand & manufacture to give an even shade. New work (two or more coats) over & including priming coat with cement primer. Sq.m. 162.55 145.13 1575.000 228585.938
52 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.m 162.35 144.96 900.000 130459.821
53 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer. Sq.m. 191.4 170.89 600.000 102535.714
54 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C, kitchen and the like coonsisting of : (i) 1st course of applying cement slurry @4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster1:3 (1cement: 3 course sand)mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per sqm of area. (iv) IVth course of 400 micron thick PVC sheet.( Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumin @1.7 kg/sq.m. Sq.m 774.25 691.29 45.000 31108.259
55 22.7.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies terraces etc. consisting of following operations. a) Applying a slurry coat of neat cement using 2.75 Kg/sq.m. of cement admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken brick /brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 Coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of the junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sq.m of cement admixed with water proofing compound conforming to IS :2645 and approved by Enngineer-in-charge. d) Finishing the top surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order & as directed and specified by the Engineer-in-Charge. With average thickness of 120 mm and minimum thickness at Khurra as 65mm Sq.m. 1522.95 1359.78 215.000 292352.009
56 4.17 Making Plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Sq.m. 681.65 608.62 20.000 12172.321
57 9.147A.5+21.3.2 UPVC sliding window: Supply and installation of UPVC (Unplasticized Polyvinyl Chloride ) windows of sliding type Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) using factory made multi chambered hollow section reinforce with galvanalised steel sheets embeded insie the chambers the sizes of sections for outer frames and sliding shutters to form sliding windows shall be as per approved manufacturers, thickness of sections shall be not less than 2mm(+or – 0.3mm) including supplying and fixing 5mm thick clear float glass of approved make with necessary glazing beading and EPDM gaskets to sliding shutters, all necessary hardwares like rollers, handles, locking system etc. fixing to RCC/ brick walls with necessary screws, rawl plugs, cleats, etc. as required complete as per drawings and directions of Engineer-in-charge. The details of the frame sections shutter sections, mullions, transom or T sections as necessary shall be as per the manufacturers recommendations as given in the technical specification. The windows shall be supplied in the required shade as decided by Engineer in charge.(Total area is to be measured for payment. The rate shall be inclusive of glass and all activities) 12072.45 100.000 1207245.000
58 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws .(Item include decorative veneering on both faces as per design approve by EIC) sqm 3086.1 2755.45 75.000 206658.482
Section - II (PHE works)
1 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 125 x 110 dia uPVC, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous china Orissa patterns W.C pan of size 580x 440 mm with integral type foot rest Each 5781.35 5161.92 4.000 20647.679
2 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid Each 6941.3 6197.59 4.000 24790.357
3 17.7.3 Providing and fixing wash basin with CI / MS brackets , 15 mm CP brass pillar taps, Kingston/Gem/Techno/Parko, 32 mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required. Wash basin size 550 x 400 mm with a pair of 15 mm CP brass pillar tap. Each 2040.85 1822.19 12.000 21866.250
4 17.10.1.4 Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per IS:13983 with CI brackets and stainless steel plug 40 mm, including painting of fittings & brackets cutting and making good the walls wherever required. Kitchen sink with drain board Size 460 x 915 bowl depth 178 mm Each 6008.45 5364.69 4.000 21458.750
5 17.22 Providing and fixing G.I inlet connection for flush pipe connecting with W.C pan Each 131.65 117.54 16.000 1880.714
6 17.28.2.1 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe 32 mm dia Each 104.35 93.17 16.000 1490.714
7 17.31 Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete. Each 1411.15 1259.96 8.000 10079.643
8 17.33 Providing & fixing 600 x 120 x 5 mm glass shelf with edges round off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws rawl plugs etc. complete Each 942.15 841.21 8.000 6729.643
9 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality, colour and make weighing not less than 88 gms (Prayag or equivalent) Each 204.7 182.77 8.000 1462.143
10 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality colour and make (Prayag or equivalent). 600mm long towel rail with total length of 645mm, width 78mm wide and effective height of 88mm, weighing not less than 190gms. Each 600.35 536.03 8.000 4288.214
11 17.70.1 Providing and fixing PTMT Bottle trap for wash basin and sink (Prayag or equivalent): Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighinh not less than 260 gms. Each 325.1 290.27 16.000 4644.286
12 18.10 Providing and fixing GI pipes complete with GI fitting and clamps, including cutting and making good the walls etc. : Internal work -Exposed on wall 0.000
ii 18.10.2 20 mm nominal bore Meter 373.35 333.35 30.000 10000.446
iii 18.10.4 32 mm dia nominal bore Mtrs. 563.6 503.21 50.000 25160.714
iv 18.10.5 40 mm dia nominal bore Mtrs. 725.15 647.46 20.000 12949.107
v 18.10.6 50 mm dia nominal bore Mtrs. 893.2 797.50 15.000 11962.500
13 18.11 Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 0.00 0.000 0.000
ii 18.11.2 20 mm nominal bore Meter 541.1 483.13 15.000 7246.875
14 18.13 Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc complete 0.000
15 18.17.3 Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end): 40 mm nominal bore Each 707.3 631.52 2.000 1263.036
16 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end) 0.00 0.000 0.000
i 18.19.3.1 Horizontal 40 mm nominal bore Each 815.05 727.72 1.000 727.723
ii 18.19.4.1 Horizontal 50 mm nominal bore Each 1173.65 1047.90 1.000 1047.902
17 18.22.2 Providing and fixing CP brass shower rose with 15 or 20 mm inlet. 150 mm diameter Each 190.1 169.73 8.000 1357.857
18 18.38 Painting GI pipes and fittings with synthetic enamel white paint over a ready mixed priming coat both of approved quality for new work (Exposed pipe) 0.000
i 18.38.1 15 mm diameter pipe Meter 16.4 14.64 35.000 512.500
ii 18.38.2 20 mm diameter pipe Meter 19.65 17.54 30.000 526.339
iii 18.38.4 32 mm diameter pipe Meter 30.7 27.41 50.000 1370.536
iv 18.38.5 40 mm diameter pipe Meter 36.05 32.19 20.000 643.750
v 18.38.6 50 mm diameter pipe Meter 43.05 38.44 15.000 576.563
19 18.49.1 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore Each 434.2 387.68 12.000 4652.143
20 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. Each 708.4 632.50 24.000 15180.000
21 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Each 594.75 531.03 24.000 12744.643
22 18.53.1 Providing & fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore Each 500.35 446.74 16.000 7147.857
23 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete complete. 25 mm diameter bore Each 399.15 356.38 1.000 356.384
24 18.53.1 Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 A) 15 mm nominal bore 15 mm nominal bore Each 500.35 446.74 12.000 5360.893
25 18.75 Providing and fixing PTMT extension Nipples for watertank pipe, fittings of approved quality, colour and make (Prayag or equivalent) 0.000
i 18.75.1 15 mm nominal bore weighing not less than 32 gms Each 43.05 38.44 4.000 153.750
ii 18.75.3 25 mm nominal bore weighing not less than 62 gms Each 100.55 89.78 1.000 89.777
26 19.4.3.1 Providing & fixing square - mouth SW gully trap grade 'A' complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside). The weight of cover to be not less than 4.50 kg & frame to be not less than 2.70 kg. as per standard design. 180 x 150 mm size P type with common burnt clay FPS (non modular) bricks of class designation 75 Each 2534 2262.50 8.000 18100.000
27 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 11687.1 10434.91 13.000 135653.839
28 19.8.1.1 Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 8127.45 7256.65 3.000 21769.955
29 Supplying, laying, jointing, testing and commissioning approved make UPVC pipes SWR grade B (on wall surface / floor / below ground surface) conforming to IS 13592 with rubber ring joints confirming to IS 5382. The quoted rate shall include necessary fittings like Tees, Bends, Offsets, floor trap with CP brass Jali etc., including M.S angle with G.I clamps complete. 110 mm dia. Total length of Pipes shall be measured in Running meters for payment. only Excavation shall be paid separately. Metre 715.68 70.000 50097.600
30 Supplying, jointing, testing & Commissioning of approved make UPVC pipe SWR grade "A" conforming to IS: 13592 (wall surface / floor / below ground) with rubber ring joints for rain water disposal conforming to IS5382.The quoted rate shall include necessary bends,etc. including M.S angle with G.I clamps complete : 110 mm dia (only Excavation shall be paid separately). Total length of Pipes shall be measured in Running meters for payment. Metre 607.29 60.000 36437.400
31 2.10.1.2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil - Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 417.35 372.63 78.000 29065.446
32 Supplying, installing, testing and commissioning approved make 15 mm CP health faucet with CP flexible tube 1.0 m long, CP crutch, nozzle angular stop cock with wall flange etc.,complete ( Make Jaquar Model No. JAQ 573 or equivalent with low volume water flow of 6 litres / minute for Health Faucet,Angle stop cock JAQ 053,CP Flanges JAQ 107 or any other equivalent). Each 4015.92 4.000 16063.680
33 18.48 Providing and placing on terrace (at all floor levels) polythene water storage tank ISI: 12701 (EACH 1000 LITRE CAPACITY) marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per litre 9.7 8.66 4000.000 34642.857
BOQ for Balance qty construction of B2 type quarter at Chaibasa S/S.(Electrical Portion)
SECTION-III : ELECTRICAL INSTALLATION & FIXTURES
SL. No. REF. DSR' 18 DESCRIPTION OF ITEM UNIT QTY. (B1- TYPE: 2) BOQ QUANTITY (B2- TYPE: 1) UNIT RATE (Rs.) as per DSR-18 UNIT RATE AMOUNT (D-01)
SUB HEAD- I : WIRING
1 1.8.1 Wiring for light point/ fan point / exhaust fan point/ with 1.5 sq. mm. FR PVC insulated copper conductor single core cable in recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc. as required ( GROUP A) Point 80 694 619.64 49,571 1
2 1.5 Wiring for light / power plug with 2 X 4 sq. mm. FR PVC insulated copper conductor single core conductor in recessed steel conduit alongwith 1 no. 4 sq. mm. FR PVC insulated copper conductor for loop earthing as required. Meter 70 265 236.61 16,563 1
3 1.7.2 Wiring for circuit wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in recessed steel conduit as required: 2 X 2.5 sq. mm. + 1 X 2.5 sq. mm. earth wire Meter 85 229 204.46 17,379 1
4 1.7 Wiring for submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in recessed steel conduit as required: 1
1.7.3 2 X 4 sq. mm. + 1 X 4 sq. mm. earth wire Meter 350 263 234.82 82,188 1
1.7.4 2X 6 sq. mm. + 1 X 6 sq. mm. earth wire Meter 35 356 317.86 11,125 1
5 1.21.2 Supplying and fixing of 25 mm dia medium class PVC conduit along with accessories in recess including cutting the wall and making good the same(for Telephone and TV cable)(14 Gauge GI pull wire to be provided inside the conduit) Meter 175 90 80.36 14,063 1
SUB HEAD - III : ERECTION OF FITTINGS & ACCESSORIES
6 1.22. Supplying and fixing metal box of following sizes in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required. 1
a) 1.22.1 75 mm X 75 mm X 60 mm deep(for Telephone and TV jack) Each 12 140 125.00 1,500 1
b) 1.22.2 100 mm X 100 mm X 60 mm deep(for TV JB) Each 6 160 142.86 857 1
c) 1.22.11 200 mm X 150 mm X 100 mm deep(Inspection Box) Each 1 308 275.00 275 1
7 1.29 Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection,painting etc. as required. Each 8 285 254.46 2,036 1
8 1.30 Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection,painting etc. as required. Each 8 406 362.50 2,900 1
9 1.23.4 Supplying and fixing 3 pin 5/6 amp socket outlet on existing switch box/cover including connections etc. as required. Each 10 58 51.79 518 1
10 1.23.1 Supplying and fixing 5/6 amp piano type switch on existing switch box/cover including connections etc. as required. Each 10 45 40.18 402 1
11 1.34 Supplying and fixing brass batten / angle holder including connection etc. as required Each 8 117 104.46 836 1
12 1.35 Erection of wall bracket / ceiling fittings of all sizes and shapes containing upto 2 GLS lamps per fitting, complete with all accessories including connection etc. as required Each 25 98 87.50 2,188 1
13 1.38 Supplying and fixing call bell/buzzer suitable for D.C./A.C. single phase, 230 volts, complete as required. Each 3 92 82.14 246 1
14 1.41 Installation, Testing and commissioning of pre-wired fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq. mm. FR PVC insulated, copper conductor, single core cable and earthing etc. as required Each 30 168 150.00 4,500 1
15 1.44 Installation, testing and commissioning of ceiling fan and regulator including wiring the down rod of standard length (upto 30cm) with 1.5 sq.mm PVC insulated copper conductor, single core cable etc. as required. Each 12 171 152.68 1,832 1
16 1.49 Numbering of ceiling fan /exhaust fan / flourescent fitting as required Each 42 48 42.86 1,800 1
17 1.50.1 Installation of exhaust fan upto 450mm sweep in the exisiting opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commisssiong etc. as required. Each 6 363 324.11 1,945 1
18 2.18 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps 'C' series SP, MCB, in sheet steel enclosure , in recess, with chained metal cover for socket outlet and complete with connections, testing and commissioning etc. as required. Each 2 1232 1100.00 2,200 1
SUB HEAD - IV : MCB'S & MAIN DISTRIBUTION BOARD :
19 Supplying and fixing 4 way (2 + 12), double door surface / recessed mounting single pole and neutral, pre-wired , sheet steel, MCB distribution board, 240 volts, in recess, complete with loose wire box, terminal blocks,duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB) Each 2 3410.00 6,820 2 109,006
20 Supplying and fixing the following in existing MCB DB complete with connections, testing and commissioning etc. as required. 215,666
a) Incoming 40 A Double Pole RCBO having a sensitivity current up to 300 mA Each 2 1556.00 3,112 2 3,975,461 0.05424939816
b) Outgoing 'C' series 240 V 10 A MCB Each 20 162.00 3,240 2
c) Outgoing 'C' series 240 V 20 A MCB Each 10 59.00 590 2
22 2.21 Providing & fixing MV Danger Notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick and vitreous enamelled white on both side & with inscription in single red colour on front side as required. Each 1 226 201.79 202 1
SUB HEAD - V : EARTHING & LOOP EARTHING 0
23 5.2 Earthing with G.I. earth pipe 4.5 mtr. Long, 40 mm. dia including accessories , and providing masonry enclosure wit cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required Set 1 5308 4739.29 4,739 1
24 5.10 Providing and fixing 25 mm x 5 mm Copper strip in 40 mm dia GI pipe from earth electrode as required. Meter 10 1224 1092.86 10,929 1
SUB HEAD - VI : LIGHTNING PROTECTION
25 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 1 448 400.00 400 1
26 6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 15 93 83.04 1,246
27 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) Meter 15 104 92.86 1,393
28 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) Meter 8 163 145.54 1,164
29 6.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. Each 1 102 91.07 91
SUB HEAD - VI : -TELEPHONE & TV CONNECTION
30 1.18.2 Supplying and drawing 2 pair , 0.5 sq mm FR PVC insulated copper conductor, unarmoured telephone cable in existing recessed steel conduit as required Meter 100 20.00 17.86 1,786 1
31 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulator, shielded with fine tinned copper braid and protected with PVC sheath in the existing recessed steel conduit Meter 75 33 29.46 2,210 1
32 Supplying and drawing 10 pair , 0.5 sq mm FR PVC insulated copper conductor, unarmoured telephone cable in existing recessed steel conduit as required Meter 12 301.00 3,612 2
33 Supplying and drawing co-axial TV cable RG-11 grade, 0.7 mm solid copper conductor PE insulator, shielded with fine tinned copper braid and protected with PVC sheath in the existing recessed steel conduit Meter 12 74.00 888 2
34 Supplying and fixing of 2 pin telephone socket on existing cover including connection etc. as required Each 10 38.00 380 2
35 Supplying and fixing co-axial Female T.V. jack including making connection, soldering etc. as required. Each 2 49.00 98 2
36 Supplying and fixing telephone tag block of powder coated metal box with locking arrangement complete as required of the following capacity
10 pairs Each 1 516.00 516 2
SUB HEAD - VII : SUPPLY OF FIXTURES
37 1200 mm sweep A.C. ceiling fan of approved make ( Khaitan or equivalent)with double ball bearing motor with all accessories suitable for operation on 230 V single phase, 50 Hz AC supply complete as required. Each 10 2250.00 22,500 2
38 12 inch sweep , 1400 R.P.M 1-Phase A.C. Exhaust fan (Khaitan Make or equivalent) complete with louver/shutter and its all accessories complete as required. Each 6 4006.00 24,036 2
39 Supply of Surface Mounted round, decorative downlighter with HF electronic ballast and translucent diffuser, pre-fitted with flat profile 2G X 15/56 lamp base ( Havells Make CAT No. LHDC71125670 or equivalent reputed Make)(Lamp included) Each 16 1482.00 23,712 2
40 Supply of industrial Bulkhead luminaires for 100 W GLS lamps of Crompton Make IBH1110ES with cast aluminium LM6 body, heat resistant glass cover with MS galvanised wireguard, etc. or equivalent complete as required. Each 2 840.00 1,680 2
41 Supply of decorative ultra slim box fixture with snap-on installers and domestic electronic ballast ( Havells Make CAT No. LHDT18128032 or equivalent reputed Make)( T5 FTL included) Each 24 1076.00 25,824 2
42 Decorative round downlighter luminaire CAT no. LHDC 73122670 of Havels or equivalent make with lamp etc. as required Each 10 1482.00 14,820 2
43 Bulk head fitting CAT no. NXC 101 of Philips make complete with glass cover, wire guard, 60 W lamps etc. as required. Each 10 840.00 8,400 2
44 1 X 4' - 36 W decorative sleek luminaire with electronic ballast complete with all accessories and tube CAT no. LHDF 32136025 Havells or equivalent approved make Each 12 1086.00 13,032 2
45 Decorative ceiling mounted luminaire CAT no. WW BCS 1901 / 1902 / 1903 of Philips or equivalent make with lamp etc. as required (for porch light) Each 1 2798.00 2,798 2
BOQ Balance qty construction of B2 type quarter at Chaibasa S/S. (Civil Portion)
NAME OF CONTRACT : Construction of B2 type Quarters at 400/220 kV Chaibasa S/S.
Sl No REF. DSR-2021 Item Description Unit Rate incl GST UNIT RATE BOQ QUANTITY AMOUNT
SECTION I (CIVIL WORKS)
1 2.8.1 Earth work in excavation by Mechanical Means (Hydralic Excavator) /Manual Means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. Cum 286.85 256.12 50.000 12805.804
2 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides, of the foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. Cum 253.95 226.74 10.000 2267.411
3 2.27 Supply and filling in plinth with local sand under floors including watering, ramming, consolidating and dressing complete. Cum 2161.2 1929.64 5.000 9648.214
4 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos / Lindane emulsifiable concentrate of 20 Percent Litre 200.9 179.38 50.000 8968.750
5 Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE-CONSTRUCTIONAL ANTI-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (Plinth area of the building at ground floor only shall be measured for payment). Chlorpyriphos / Lindane Emulsifiable concentrate 20 Percent with 1 Percent concentration Sqm 78.36 78.36 30.000 2350.800
6 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering : All works upto plinth level. 0.000
I 4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) Cum 6326.05 5648.26 10.000 56482.589
II 4.1.3 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) Cum 7555.05 6745.58 2.000 13491.161
lll 4.1.10 1:5:10 ( 1 Cement: 2 coarse sand : 5 graded stone aggregate 10mm nominal size) Cum 6050.65 5402.37 1.000 5402.366
7 4.12 Extra for providing and mixing water-proofing material in cement concrete work @ 1 Kg per 50 Kgs of cement. Per 50 Kgs of cement 57.15 51.03 5.000 255.134
8 4.2.3 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 Cu.m. 9375.2 8370.71 2.000 16741.429
9 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All works upto Plinth level. 1:1.5:3 (1 Cement : 1.5 Coarse sand : 3 graded stone aggregate 20 mm nominal size) Cu.m. 8364.2 7468.04 2.000 14936.071
10 5.2.2 Reinforced cement concrete work in walls ( any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement. 1:1.5:3 (1 Cement: 1.5 Coarse sand: 3 Graded stone aggregate 20 mm nominal size) Cu.m. 10185.05 9093.79 4.000 36375.179
11 5.8 Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 Cement :1.5 Coarse sand :3 Graded stone aggregate 20 mm nominal size). Cu.m. 9297.7 8301.52 1.000 8301.518
12 5.9 Centring and shuttering including strutting, propping etc. and removal of form for: 0.000
II 5.9.2 Walls (any thickness) - Pardie Walls including attached pilasters, buttresses, plinth & string courses etc. Sq.m. 669.55 597.81 10.000 5978.125
III 5.9.3 Suspended floors & Slabs, roofs, landings, balconies and access platform Sq.m. 766.55 684.42 20.000 13688.393
IV 5.9.5 Lintels, beams, plinth beams, girders, bressumers & cantilevers Sq.m. 608.35 543.17 1.000 543.170
V 5.9.6 Columns, pillars, piers abutments posts & struts Sq.m. 804.25 718.08 1.000 718.080
VII 5.9.9 Arches, domes, vaults upto 6 m span Sq.m. 1826.25 1630.58 5.000 8152.902
13 5.22.6 Reinforcement for R.C.C. work including straightening, cutting, bending, binding and placing in position complete. Thermo-Mechanically Treated bars Kg. 89.65 80.04 500.000 40022.321
14 6.1.2 Brick work with F.P.S bricks of class designation 75 in foundations & plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand). Cu.m. 6658.25 5944.87 5.000 29724.330
15 6.4.2 Brick work with F.P.S bricks of class designation 75 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand). Cu.m. 8288.35 7400.31 6.000 44401.875
16 6.13.2 Half brick masonary with FPS bricks of class designation 75 in superstructure above plinth level up to floor v level.Cement mortar 1:4(1cement:4 coarse sand). Sq.m. 1018.05 908.97 40.000 36358.929
17 6.15 Extra for providing and placing in position 2 Nos., 6mm dia M.S. bars at every third course of half brick masonry (with F.P.S. bricks). Sq.m. 86.45 77.19 40.000 3087.500
18 9.129 Providing & fixing cup board of shutters 25mm thick, with pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade I Type II), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. Sq.m. 1982.7 1770.27 12.500 22128.348
19 9.132 Providing and fixing aluminium, U beading of required size to pre-laminated / flush door shutter including fixing etc. complete as per direction of Engineer - in - charge. Kg. 530.3 473.48 25.000 11837.054
20 9.27.2.1.1 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :30 mm thick shutterswith ISI marked M.S. pressed butt hinges bright finished of required size : Second class teak wood . Sqm 3863.65 3449.69 15.500 53470.156
i Avg. of 21.1.1.2 & 21.1.2.2 For fixed portion, shutters of doors, windows & ventilators including providing & fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 515.55 460.31 150.000 69046.875
21 10.29.1 Providing and fixing fly proof wire gaauge to Aluminium frame window, celestory wndows & doors with MS flat 15x3mm and nuts & bolts etc complete fittings: Galvanised MS wire gauge with 0.63 mm dia wire and 1.4 mm aperature on both sides. Sqm 732.2 653.75 34.000 22227.500
22 9.43 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. metre 626.55 559.42 35.000 19579.688
23 9.79.2 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers including necessary screws etc. complete (best make of approved quality): 50 mm Each 306.4 273.57 8.000 2188.571
24 9.80 Providing and fixing 50 mm bright finished brass cupboard or wardrobe knob of approved quality with necessary screws. Each 63.65 56.83 16.000 909.286
25 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 300 x 16 mm Each 260.3 232.41 9.000 2091.696
26 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 0.000
27 9.100 Providing and fixing aluminium handles ISI marked anodised anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 0.000
28 9.101.2 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour & shade with necessary screws etc. complete : Twin rubber stopper Each 62.25 55.58 10.000 555.804
29 9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI Marked, with six levers and a pair of Anodised [Anodic coating not less than Grade AC 10 as per IS:1868 ] Aluminium lever handles with necessary screws etc. complete (Best make of approved quality) Each 739.8 660.54 8.000 5284.286
30 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20 X 10 X 2mm and braced with flat iron diagonals 20 X 5 mm size with top and bottom rail of T-iron 40 X 40 X 6 mm, with 40 mm dia. steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Sq.m. 9397.35 8390.49 4.000 33561.964
31 10.18 Providing and fixing circular/hexagonal cast iron or MS sheet box for ceiling fan clamp of internal dia 140 mm, 73 mm height , top lid of 1.5mm thick M.S sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron / M.S . sheet box by means of 3.3mm dia round headed screws,one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing. Each 185.2 165.36 14.000 2315.000
32 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kgs. 197.7 176.52 400.000 70607.143
33 10.25.2 Steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required. In gratings, frames, guard bars, ladders, railings, brackets, gates, grills and similar works. Kgs. 142.3 127.05 250.000 31763.393
34 10.26.1 Providing and fixing handrail of Approved size by welding etc to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer. M.S.Tube Kgs. 157.15 140.31 225.000 31570.313
35 Providing and erecting railing in stainless steel with hand rail out of 50mm dia. stainless steel medium hollow pipe and 25mm dia. vertcal medium hollow pipes and 25mm dia vertical medium hollow pipes at a spacing of 200 mm c/c with 40 x 6 S.S. continuous straps to be fixed to RCC padadis and also at 0.6 m level. The total height of the railing shall be 80 cms above the RCC padadi. RMT 498.02 498.02 30.000 14940.600
36 8.2 Providing and fixing 18 mm thickgang saw cut mirror polished [premoulded and prepolished] machine cut for kitchen platforms, vanity counters, window sils, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. 0.000
i 8.2.2.2 Granite of any colour and shade: Area of slab over 0.50 sq.m. Sq.m. 4425.35 3951.21 6.000 23707.232
ii 8.2.1.1 Rajnagar plain White marble/udaipur green marble/zebra black marble:Area of slab up to 0.50 sq.m. Sq.m. 2906.45 2595.04 16.000 41520.714
37 Avg. of 8.3.1 & 8.3.2 Extra for providing edge moulding to 18mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer - in - Charge. Marble / Granite work RMT 331.875 296.32 25.000 7407.924
38 11.37A Providing and Fixing 1st quality ceramic glazed tiles conforming to IS 15622 (Thickness to be specified by the Manufacturer ) of Approved Make in all colours, shades except begundy, bottle-green, black of any size as approved by the Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement mortar 1:3 (1 Cement:3 Coarse Sand) and jointing with grey cement slurry @ 3.3 kg per sq m including pointing in white cement mixed with pigment of matching shade complete. Sq.m. 938.5 837.95 100.000 83794.643
39 11.37 Providing and Laying ceramic glazed floor tiles 300 mm X 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of Approved make in all colours such as White, Ivory, grey, Fume, Red Brown, laid on 20 mm thick bed of Cement mortar 1:4 (1 Cement:4 Coarse Sand) including pointing the joints with white cement and matching pigments etc complete. Sq.m. 935.6 835.36 15.000 12530.357
40 11.41.2 Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of Tile 600 x 600 mm. Sqm. 1416.65 1264.87 150.000 189729.911
41 11.46.2 Providing and laying Vitrified tiles in different sizes (thichness to be specified by manufacturer), with waterabsorption less than 0.08% and conforming to I.S. 15622 of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm. Sqm. 1466.5 1309.38 10.000 13093.750
42 12.21.1 Providing gola 75 X 75 mm in cement concrete 1 : 2 : 4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 10 mm and down gauge) including finishing with cement mortar 1 : 3 (1 cement : 3 fine sand) as per standard design: In 75 X 75 mm deep chase metre. 260.2 232.32 35.000 8131.250
43 12.22 Making khurras 45 x 45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. Each 266.6 238.04 4.000 952.143
44 13.1.1 12mm cement plaster of mix 1:4( 1 cement :4 fine sand) Sq.m. 294.85 263.26 250.000 65814.732
45 13.2.2 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 Cement : 6 Fine sand) Sq.m. 324.3 289.55 200.000 57910.714
46 13.16.1 6 mm cement plaster of mix 1 : 3 (1 Cement : 3 Fine sand) Sq.m. 253.05 225.94 30.000 6778.125
47 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 Cement : 5 Coarse sand) finished with top layer 6 mm thick cement plaster 1:6 (1 Cement : 6 Fine sand) Sq.m. 442.75 395.31 400.000 158125.000
48 13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers: per bag of 50 kg cement used in the mix 60.55 54.06 100.000 5406.250
49 13.24.2 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In two coats. Sq.m. 967.85 864.15 35.000 30245.313
50 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sq.m. 123.85 110.58 1100.000 121638.393
51 13.41.1 Distempering with oil bound washable distemper of approved brand & manufacture to give an even shade. New work (two or more coats) over & including priming coat with cement primer. Sq.m. 162.55 145.13 700.000 101593.750
52 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.m 162.35 144.96 400.000 57982.143
53 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer. Sq.m. 191.4 170.89 250.000 42723.214
54 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C, kitchen and the like coonsisting of : (i) 1st course of applying cement slurry @4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster1:3 (1cement: 3 course sand)mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per sqm of area. (iv) IVth course of 400 micron thick PVC sheet.( Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumin @1.7 kg/sq.m. Sq.m 774.25 691.29 30.000 20738.839
55 22.7.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies terraces etc. consisting of following operations. a) Applying a slurry coat of neat cement using 2.75 Kg/sq.m. of cement admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken brick /brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 Coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of the junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sq.m of cement admixed with water proofing compound conforming to IS :2645 and approved by Enngineer-in-charge. d) Finishing the top surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order & as directed and specified by the Engineer-in-Charge. With average thickness of 120 mm and minimum thickness at Khurra as 65mm Sq.m. 1522.95 1359.78 190.000 258357.589
56 4.17 Making Plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Sq.m. 681.65 608.62 5.000 3043.080
57 9.147a.5+21.3.2 UPVC sliding window: Supply and installation of UPVC (Unplasticized Polyvinyl Chloride ) windows of sliding type Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) using factory made multi chambered hollow section reinforce with galvanalised steel sheets embeded insie the chambers the sizes of sections for outer frames and sliding shutters to form sliding windows shall be as per approved manufacturers, thickness of sections shall be not less than 2mm(+or – 0.3mm) including supplying and fixing 5mm thick clear float glass of approved make with necessary glazing beading and EPDM gaskets to sliding shutters, all necessary hardwares like rollers, handles, locking system etc. fixing to RCC/ brick walls with necessary screws, rawl plugs, cleats, etc. as required complete as per drawings and directions of Engineer-in-charge. The details of the frame sections shutter sections, mullions, transom or T sections as necessary shall be as per the manufacturers recommendations as given in the technical specification. The windows shall be supplied in the required shade as decided by Engineer in charge.(Total area is to be measured for payment. The rate shall be inclusive of glass and all activities) 12072.45 10778.97 50.000 538948.661
58 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws .(Item include decorative veneering on both faces as per design approve by EIC) sqm 3086.1 2755.45 35.000 96440.625
Section - II (PHE works)
1 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 125 x 110 dia uPVC, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous china Orissa patterns W.C pan of size 580x 440 mm with integral type foot rest Each 5781.35 5161.92 2.000 10323.839
2 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid Each 6941.3 6197.59 2.000 12395.179
3 17.7.3 Providing and fixing wash basin with CI / MS brackets , 15 mm CP brass pillar taps, Kingston/Gem/Techno/Parko, 32 mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required. Wash basin size 550 x 400 mm with a pair of 15 mm CP brass pillar tap. Each 2040.85 1822.19 6.000 10933.125
4 17.10.1.4 Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per IS:13983 with CI brackets and stainless steel plug 40 mm, including painting of fittings & brackets cutting and making good the walls wherever required. Kitchen sink with drain board Size 460 x 915 bowl depth 178 mm Each 6008.45 5364.69 2.000 10729.375
5 17.22 Providing and fixing G.I inlet connection for flush pipe connecting with W.C pan Each 131.65 117.54 8.000 940.357
6 17.28.2.1 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe 32 mm dia Each 104.35 93.17 8.000 745.357
7 17.31 Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete. Each 1411.15 1259.96 4.000 5039.821
8 17.33 Providing & fixing 600 x 120 x 5 mm glass shelf with edges round off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws rawl plugs etc. complete Each 942.15 841.21 4.000 3364.821
9 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality, colour and make weighing not less than 88 gms (Prayag or equivalent) Each 204.7 182.77 4.000 731.071
10 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality colour and make (Prayag or equivalent). 600mm long towel rail with total length of 645mm, width 78mm wide and effective height of 88mm, weighing not less than 190gms. Each 600.35 536.03 4.000 2144.107
11 17.70.1 Providing and fixing PTMT Bottle trap for wash basin and sink (Prayag or equivalent): Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighinh not less than 260 gms. Each 325.1 290.27 8.000 2322.143
12 18.10 Providing and fixing GI pipes complete with GI fitting and clamps, including cutting and making good the walls etc. : Internal work -Exposed on wall 0.000
ii 18.10.2 20 mm nominal bore Meter 373.35 333.35 20.000 6666.964
iii 18.10.4 32 mm dia nominal bore Mtrs. 563.6 503.21 25.000 12580.357
iv 18.10.5 40 mm dia nominal bore Mtrs. 725.15 647.46 15.000 9711.830
v 18.10.6 50 mm dia nominal bore Mtrs. 893.2 797.50 10.000 7975.000
13 18.11 Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 0.000
ii 18.11.2 20 mm nominal bore Meter 541.1 483.13 10.000 4831.250
14 18.13 Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc complete 0.000
15 18.17.3 Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end): 40 mm nominal bore Each 707.3 631.52 1.000 631.518
16 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end) 0.000
i 18.19.3.1 Horizontal 40 mm nominal bore Each 815.05 727.72 1.000 727.723
ii 18.19.4.1 Horizontal 50 mm nominal bore Each 1173.65 1047.90 1.000 1047.902
17 18.22.2 Providing and fixing CP brass shower rose with 15 or 20 mm inlet. 150 mm diameter Each 190.1 169.73 4.000 678.929
18 18.38 Painting GI pipes and fittings with synthetic enamel white paint over a ready mixed priming coat both of approved quality for new work (Exposed pipe) 0.000
i 18.38.1 15 mm diameter pipe Meter 16.4 14.64 25.000 366.071
ii 18.38.2 20 mm diameter pipe Meter 19.65 17.54 20.000 350.893
iii 18.38.4 32 mm diameter pipe Meter 30.7 27.41 25.000 685.268
iv 18.38.5 40 mm diameter pipe Meter 36.05 32.19 15.000 482.813
v 18.38.6 50 mm diameter pipe Meter 43.05 38.44 15.000 576.563
19 18.49.1 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore Each 434.2 387.68 6.000 2326.071
20 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. Each 708.4 632.50 12.000 7590.000
21 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Each 594.75 531.03 12.000 6372.321
22 18.53.1 Providing & fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore Each 500.35 446.74 8.000 3573.929
23 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete complete. 25 mm diameter bore Each 399.15 356.38 1.000 356.384
24 18.53.1 Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 A) 15 mm nominal bore 15 mm nominal bore Each 500.35 446.74 6.000 2680.446
25 18.75 Providing and fixing PTMT extension Nipples for watertank pipe, fittings of approved quality, colour and make (Prayag or equivalent) 0.000
i 18.75.1 15 mm nominal bore weighing not less than 32 gms Each 43.05 38.44 4.000 153.750
ii 18.75.3 25 mm nominal bore weighing not less than 62 gms Each 100.55 89.78 1.000 89.777
26 19.4.3.1 Providing & fixing square - mouth SW gully trap grade 'A' complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside). The weight of cover to be not less than 4.50 kg & frame to be not less than 2.70 kg. as per standard design. 180 x 150 mm size P type with common burnt clay FPS (non modular) bricks of class designation 75 Each 2534 2262.50 8.000 18100.000
27 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 11687.1 10434.91 12.000 125218.929
28 19.8.1.1 Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 8127.45 7256.65 3.000 21769.955
29 Supplying, laying, jointing, testing and commissioning approved make UPVC pipes SWR grade B (on wall surface / floor / below ground surface) conforming to IS 13592 with rubber ring joints confirming to IS 5382. The quoted rate shall include necessary fittings like Tees, Bends, Offsets, floor trap with CP brass Jali etc., including M.S angle with G.I clamps complete. 110 mm dia. Total length of Pipes shall be measured in Running meters for payment. only Excavation shall be paid separately. Metre 715.68 60.000 42940.800
30 Supplying, jointing, testing & Commissioning of approved make UPVC pipe SWR grade "A" conforming to IS: 13592 (wall surface / floor / below ground) with rubber ring joints for rain water disposal conforming to IS5382.The quoted rate shall include necessary bends,etc. including M.S angle with G.I clamps complete : 110 mm dia (only Excavation shall be paid separately). Total length of Pipes shall be measured in Running meters for payment. Metre 607.29 50.000 30364.500
31 2.10.1.2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil - Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 417.35 372.63 66.000 24593.839
32 Supplying, installing, testing and commissioning approved make 15 mm CP health faucet with CP flexible tube 1.0 m long, CP crutch, nozzle angular stop cock with wall flange etc.,complete ( Make Jaquar Model No. JAQ 573 or equivalent with low volume water flow of 6 litres / minute for Health Faucet,Angle stop cock JAQ 053,CP Flanges JAQ 107 or any other equivalent). Each 4015.92 4.000 16063.680
33 18.48 Providing and placing on terrace (at all floor levels) polythene water storage tank ISI: 12701 (EACH 1000 LITRE CAPACITY) marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per litre 9.7 8.66 2000.000 17321.429
Balance work for Construction of Township Quarters at Chaibasa Substation
Schedule-I of Price Bid
Name of the bidder 0 To,
Address 0 Contracts and Materials Department
0 POWER GRID CORPORATION OF INDIA LIMITED
0 VIDYUT BOARD COLONY, SHASTRINAGAR, PATNA-23
Sl. No. Description Amount (Ex. GST)
1 CIVIL & PHE WROKS-D TYPE 2,816,921.32
2 ELECTRICAL WORKS-D TYPE 291,488.93
3 CIVIL & PHE WROKS-C TYPE 4,071,695.10
4 ELECTRICAL WORKS-C TYPE 473,845.04
5 CIVIL & PHE WROKS-B3 TYPE 8,231,754.48
6 ELECTRICAL WORKS-B3 TYPE 682,500.68
7 CIVIL & PHE WROKS-B2 TYPE 3,185,182.75
8 ELECTRICAL WORKS-B2 TYPE 395,139.25
Gross Total Amount Excluding GST Charge : (SL. NO. 1-8)= 20,148,528
TOTAL AMOUNT excl. taxes 20,148,527.53
Above and below (in %): To be quoted by bidder
Quoted Price 20,148,528
GST (in percentage )@ on Quoted Price 0.00
Total amount including taxes 20,148,528
Note: If any part of price which required to be filled by bidder kept blank, the bid price shall be considered as inclusive and evaluation shall be done accordingly
Date Printed name 0
Place Designation 0
Balance work for Construction of Township Quarters at Chaibasa Substation
Name of the bidder 0 To,
Address 0 Contracts and Materials Department
0 POWER GRID CORPORATION OF INDIA LIMITED
0 VIDYUT BOARD COLONY, SHASTRINAGAR, PATNA-23
We declare that following are our Total Bid Prices in Rupees for the expenditure incurred for the entire scope of work as specified in the specifications and documents. We have indicated Total Estimated Cost as indicated in the "Bill of Quantity(BOQ) & Prices" covering entire scope of works enclosed herewith as Schedule-I.
I Total for Installation/Services as per Schedule-I 20,148,528
II Total GST on services/Installation as per Schedule-I 0.00
III Toal BID Price including all taxes 20148527.53
Date 0 Printed Name 0
Place 0 Designation 0
RFX. No. 5002002368 NIT-417 Bid Form 2nd Envelope
BID FORM (Second Envelope)
Bid Proposal Ref. No.
Contract Services
Power Grid Corporation of India Ltd.,
Eastern Region Transmission System-I
Vidyut Board Colony Shastri Nagar
Name of Contract : Balance work for Construction of Township Quarters at Chaibasa Substation
Dear Ladies and/or Gentlemen,
Schedule-I Service/Installation charges
2.4 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced.
3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.
3.1 We confirm that we shall also get registered with the concerned Goods and Service Tax Authorities, in all the states where the project is located.
4.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.
Thanking you, we remain,
Yours faithfully,
For and on behalf of
Date : 00-Jan-00 Printed Name : 0
Place : 0 Designation : 0
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer :
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
Civil Works TS.pdf
pdf • 1.99 MB
Standard Field Quality Plan Civil Works for Site Packages Revision 04 (1).pdf
pdf • 2.22 MB
Attachment-26 Declaration regarding events encountered pursuant to ITB Clause 2-1.docx
docx • 0.03 MB
Attachment-27.doc
doc • 0.04 MB
First Envelope and Bid Forms.xlsx
xlsx • 0.76 MB
01 Invitation for Bids (IFB)-Section-I.doc
doc • 0.16 MB
02 Sec-II ITB SSTE S&I R4-DCB-SRM-signed.pdf
pdf • 0.46 MB
03 Section - III BDS.doc
doc • 0.13 MB
03A Annexure A (BDS) QR.doc
doc • 0.05 MB
03D ANNEX-C (BDS) Sample E-stamp paper.pdf
pdf • 0.08 MB
03E ANNEX-E(BDS)-Undertaking for Authenticity.DOC
doc • 0.05 MB
04 Conditions of Contract Civil Works.pdf
pdf • 0.39 MB
04A GCC Civil Amendments I - X.pdf
pdf • 3.64 MB
05 SCC-Section-V.docx
docx • 0.07 MB
Annexure-B (BDS).pdf
pdf • 0.50 MB
Annexure-D (BDS).pdf
pdf • 0.37 MB
Saftey Pact Latest.doc
doc • 0.06 MB
~$ SCC-Section-V.docx
docx • 0.00 MB
Integrity Pact.pdf
pdf • 0.51 MB
Sample Stamp Paper for Integrity Pact.pdf
pdf • 0.28 MB
Thumbs.db
db • 0.03 MB
Price_Schedule.xlsx
xlsx • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .