REPAIRS OF FLOORING,JOINERY,SANITARY FITTINGS,PLUMBING AND OTHER MISC BR WORKS IN ZONE G and ZONE F UNDER AGE BR II (N) No II OF GE (N) SECUNDERABAD

Amount

M& L for Complete removal of existing water proofing treatment of any thickness and cement mortar screed in existing roof including scrapping out old treatment/ bitumen etc. The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projections, washed, dried up and cleaned of all foreign material and dust to receive new water proofing treatment and removal of rubbish off the premises to a distance exc. 500m and not exc 1.5 Km complete all as directed.

Demolition of cement concrete of any description and in any position not therwise specifically provided for complete all as directed.

Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded broken stone aggregate) as in leveling course on roof slab including finishing the surface of concrete even and fair to receive screed complete all as specified and as directed.

Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed by Engineer-in-Charge including testing :-(a) 10mm thick rendering in cement mortar (1:3) mixed with and including integral water proofing compound @ 3% by weight of cement on roof slab finished even and fair complete (b) On the dried plastered surface, one coat of approved bituminous primer @ 0.25 Kg/Sqm shall be applied. (c) On this primered surface, APP modified bituminous memberance 3mm thick with non woven polyster mat as reinforcement weighing not less than 3.50 Kg/Sqm with plain finish shall be laid by torch application method (d) Apply a coat of bituminous aluminium paint @ 0.15 Kg/Sqm. (e) The overlap while torching shall be at least 100mm at the longitudinal edges and 150mm at the ends. (f) The treatment shall be carried as per manufacturer instructions through authorised applicator.

S&F 12mm thickness toughened glass factory made frosted with as in door/ wall partition including providing and fixing of top & bottom pivot & spring type fixing arrangements & necessary holes & making good & required hinges,SS 304 grade 250mm SS handles,door/floor spring etc and including all necesaary fittings and making good the existing surfaces complete all as specified by Eng.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for 75mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate)for sub base for tiles complete all as spd

M & L for applying tile adhesive of 10 mm thick below surface including roughening/chipping floor surface as per manufacturers instruction.

M & L For 15mm thick Screedbed in CM (1:6) Complete

M&L non-skid coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding exc. 0.06 sqm but not exc. 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified.

M&Lcoloured Vitrified Double Charged tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm as in floor,skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified.

M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete

Material and labour for 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete and dismantling existing stone slab of any description and type all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed.

Dismantling water tanks of capacity exc 500 lit but n exc 1000 lit complete all as spd

S&F rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) complete all as specified and directed. Make: Cat No. HSWS-0100-01-Pure of M/s Sintex

S&F in repair 20mm bore tubes uPVC pipes SDR 11 & Plain uPVC SDR 11 fittings all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified.

S&F in repair 25mm bore tubes uPVC pipes SDR 11 & Plain uPVC SDR 11 short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.complete all as spd

S&F in repairs 110mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors.

S&F in repairs 75mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors.

S&F in repairs 110mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to walls.

S&F in repairs 75mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to walls.

S&F in repairs 50mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls.

S&F in replacement PVC (SWR) floor trap 75mm dia of outlet, plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

S&F CP grating round 100mm/75 mm size with/without hole complete all as specified.

S & F in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

S & F in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

S & F in repair for PVC (SWR) branch piece, single Y, equal or unequal for 110mm bore pipe complete all as specified and as directed.

S & F in repair for PVC (SWR) branch piece, single Y, equal or unequal for 75mm bore pipe complete all as specified and as directed.

S & F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified..

S & F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified..

S & F in repairs 110 mm bore PVC (SWR) door bends any radius complete all as specified and directed

S & F in repairs 75 mm bore PVC (SWR) door bends any radius complete all as specified and directed

S & F of Shelf of PTMT oif 450 mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete

M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified.

S&F in repair 15 mm dia bore Stop valves , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including PVC P-trap 100 mm dia , complete including making good to floor all as specified.

S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) white,including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 600mm long PVC connection with PTMT nuts and plastic water closet seat of white in colour, back closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified.

Supply and fix in repairs vitreous china wash down floor mounted coupled water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 410x720x800mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. VGS-WHT-81751 S (Bowl) and VGS-WHT-81201 (Cistern) or equivalent all as spd and directed by Engr In Charge

S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, 15 mm dia bore pipe pillar tap cast copper alloy with capstan heads chromium plated fancy type, to be fixed with M S brackets complete all as specified.

S & F in repair Grace Bathroom cabinet wall hung corrosion free and water proof cabinete with DTC high grade stainless steel soft close hinges, cabinet set with slim WHB of size 600mm x 470mm x 460mm ( without mirror) incl shelf in suitable colour fixed in position with all necessary fittings incl waste coupling and pvc waste pipe, 32 mm complete all as spd MAKE : Johnson Grace Bath Cabinet Cat No : E5580PW (Slim Vanity Basin ) E5588SM ( Shelf ), E5592SM(Wall Mounted Cabinet ) or of equivalent make as per Appvd A approved by AGE.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. Cera/Prayag/Hindware

S & F in repairs cascade type syphon-set any size incl all other accessories complete all as specified and directed.

S & F in repairs PTMT jet spray for EWC any size incl all other accessories complete all as specified and directed.

S&F PVC connection 15mm bore size with two nuts and washers of length 450mm all as specified. Make : Prayag/Polytuff.

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm, bowl size 405mm x 330mm x 160mm all as specified.

S&F in replacement stainless steel plate rack of size 609mm X 762 X 254 mm all as specified Blue star

S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed.

S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified.

Supply and fixing in repairs bib tap standard of PTMT any colour 15 mm bore minimum weight 90 gram ISI Marked. complete all as specified.

Supply and fixing in repairs 15mm Chromium plated fancy type quater turn Bib taps, cast screwed down, screwed for iron pipe or for brass ferrule an fixed complete

S & F of 15 mm Stop valves,Chromium plated fancy type quater turn screwed down, high pressure,screwed both ends for iron pipe or for unions and fixed complete all as specified.

S & F of 15 mm Concealed type Stop valves quater turn,Chromium plated fancy typescrewed down, high pressure,screwed both ends for iron pipe or for unions and fixed complete all as specified.

S & F in repairs 15mm Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) ®complete all as specified.

S & F in repairs 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms)®complete all as specified.

Supply and fixing in repairs 32 mm dia bore PVC flexible pipe for wash hand basin complete all as specified..Make Pyage/ Polytuff

S & F in repairs for hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. of 1 metre long tube & wall hook complete all as specified and as directed. Make: Cat No - ALD-CHR-573 of Jaquar or of equivalent in ROCA/KOHLER

S&F in repairs Two Way (2 in 1) bib taps with wall flange quarter turn suitable for 15mm bore pipe fancy type brass CP, screwed for iron pipe or brass ferrule complete all as specified. Make: CERA F1020163or equivalent in Parryware/Hindware

S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F Stainless Steel Auto Concealed Zero Crank Cabinet Hinges complete all as specified & directed.

Demolition of existing RCC Water tanks of capacity n exc 1000lit and making good the existing surface and removal of debris outside MOD land complete

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.

Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 50 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm all around the shutters complete including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

S & F of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

Supply and fix second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

M& L Preparation of new surfaces of wood any description and in any position over 10 cm width or girth and M&L for applying two coat of synthetic enamel paint over one coat of pink primer all as specified and directed by Engr-in-Charge. Sqm 49.68 140.20 6965.14 17001

S & F powder coated anodised Aluminium alloy sections sliding windows with frames Series-C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.Note : Making all edges i.e. cill and jamb good by cement mortar 1:3

M & L powder coatedaluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm all as specified

S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.

S & F for anodised Aluminium partition/ door frame of size 100 x44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98mm thick, bottom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 x 44 x1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stopper, tower bolts 200mm, sliding door bolt 300mm or mortice lock with 5mm thick tinted glass /pre laminted particle board (Novapan) panel and making good to the disturbed wall surfaces to match existing surface complete all as specified and directed.

S & F 5.5mm thickness Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane for aluminium doors complete all as spd and directed

S & F 4.0 mm thickness Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane incl Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as spd and directed

Supply and fix in repair for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with stainless steel wire staples complete all as specified and as directed

S & F 4.0 mm thickness figured glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane incl Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as spd and directed

S&F Stainless steel butt hinges 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as directed and specified.

Supply and fixing in repairs 300mm size mild steel, ordinary rat tail rod pattern spring (helical door spring) with roller and roller plates including welding to angle iron plate or chokhats as required and as specified.

S&F in repairs floor door stopper of Stainless steel body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as directed and specified.

M/s GM Constructions (BID ID -3497256)