Construction of Phase III a...

Amount

[23.23.9]MISCELLANEOUS 9. Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required [Through Rate]

SITC of UTP cat 6 information outlet( RED - for Data - User End) complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- RandM,/Molex/D-link

SITC of UTP Face plate(Single/dual) complte in all respect upto the entire satisfaction of Engineer-in-Charge of the workMake:- RandM,/Molex/D-link

SITC of UTP cat 6 Mounting Patch Cords Low smoke zero helogene (LSZH/LS0H )complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- RandM,/Molex/D-link 3 FT lenth

SITC of UTP cat 6 Mounting Patch Cords Low smoke zero helogene (LSZH/LS0H )complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- RandM,/Molex/D-link 7 FT lenth

S/I/T/C of 24-port 19` 1 U jack panel which Should Be made of sheet steel 1.5 mm, Should be 19` 1U straight Patch Panel, 24-port,Should have integral cable management Metal shelf,Should accept Shielded as well as Unshielded jacks, Should have rear cable management shelf metallic powder coated Make :-RandM/D Link/Molex

SITC of Edge Switch 24 Port 10/100/1000 plus 2 10 G SFP Layer 2 manageble Base T Manageble auto sense, Ethernet switch complete in all respect up to the entire satisfaction of Engineer-in charge of work . Make:CISCO/Juniper/Alcatel/D- Link

SITC of Digital Hybrid IP-PBX System configured for 04 Analog Trunk Connectivity, 4 Digital Extensions, 32Analog Extensions. It should be possible to reach the capacity of system to 64 ports and 99 IP users without any add-on CPU or chassis/hardware platform. System should have two Gigabit Ethernet ports for LAN and WAN to separate out local and VoIP traffic on external network.It should be suitable for DTMF as well as the FSK type of telephone instruments. It should have built-in multi-party conferencing without any software licensing. It should be possible to carry out 15 conferences of 3-participants at a time. The system shall have built-in web based software programming tool for system administration. The call ringing sequence would be programmable and have options such as simultaneous, hunting off, round robin and delayed simultaneous.The system shall support flexible numbering for extensions such as it may have extensions with 1 digit, 2 digits and up to 6 digits numbers as well as in combination of all.The system should have built-in outgoing Call Log buffer of 6000 calls, incoming call log buffer of 5000 and call log buffer of 1000 internal calls. Operator features shall have the assistance to extension, attended call transfer, call intercept, indication of call waiting, night service control etc. should be available by default. Make : Avaya/Unify/Matrix

SITC of 12U Rack with 2 side FAN with 3 socket PDU with 15 AMP DP for power surge safty. With pole mount accessories. Rack should be certified. Make: Valrack,Netrack,Comrack

SITC of Layer 2 Gigabit 8 Port PoE Switch should have . of 10/100/1000 Mbps Ethernet Ports and 2 Nos. of dual personality (SFP/GbE) portsThe switch should be flexible enough to be managed through cloud and standalone mode. The cloud management should be free of cost The Switch should have Non-blocking wire speed switch fabric, should have Min. 20 Gbps Back plane or more and should have Min. 15 Mpps or more, IPv6 Support, 16K MAC address, CE-LVD ,FCC, CE ,BSMI , RoHS Compliant,Operating temperature 0 DegC to 50 Deg C Should have Cluster Stacking to manage up to 20 switches by single IP addressThe OEM Brand should be having valid ISO 9001, ISO 14001, ISO 45001:2018 all these cerificates must be submitted in technical bid.Make- Cisco/ Zyxel/ Juniper/D-Link

S/I/T/C of 43` LED Monitor, Full HD, HDMI Port, Component Video Inputs, 1 Digital Audio Out, Make: LG/Panasonic/Samsung

SITC of Dual Band Concurrent Indoor Managed AP .The Aps Must support 802.11b/g/n/ac/ax.Should provide atleast 24 dBm Radio output power on both radios. Assess Point must be having integrated internal antenna only. To benefit fully from WIFI6, the 5GHz radio should support MU-MIMO 2x2x.2 to serve the client devices better. Should Support up to 32 SSID (16 On Each Band) and support datarate 1.7 Gbps.Encryption supported should include WPA/WPA2/WPA3/WPA3-2-Mixed Complete in all respact. Make:- Cisco/HP/Netgear.

SITC of 20 Pair multicore Telephone cable conductor size 0.51mm bright annealed copper conductor PVC insulated and shealed in existing pipe / Channel etc. (excluding the cost and laying of pipe / channel) and making necessary connection complete in all respect . Make:- Delton / Shalimar / Polycap/Phenolex.

SITC of 50 Pair IDF/MDF with Krone Make module on Krone Make MS Box duly painted and having lock facilitis

SITC of surveillance 8 TB Hard Drive for NVR Make:WD/Toshiba/Segate

SITC of Class D amplifier 500 watts Frequency response: 60 Hz to 15 khz ( plus 1/3db), Inputs :XLR and phone jack , Input 1, Input 2-4, Impendence :20kO, Sensitivity : 1 V balanced , S/N ): )85 dB complete in all respect MakeHenrich/ Honeywell/ JBL. rate are excluding of GST

SITC of 12 Watts Cabinet Loudspeaker ,Max. Power -18W , Power Tapping -12 / 6 / 3 W, Rated Input Voltage 100V , Sound Pressure Level (at rated power/1W, 1 KHz, 1m) - 96 / 90 db , Effective frequency range ( -10 db ) - 200 Hz – 15000 Hz , Rated input impedence - 833 ohm, Opening Angle ( -6 db ) - 210° / 60° ( at 1 / 4 Khz ) Dimension (HxWxD) in mm 243x236x132 complete the job in all respect to the entire satisfaction of Engineer -incharge of the work.Make:-BOSCH/Honeywell/Henrich

SITC of Horn Loudspeaker made with ABS, watered dust protected to IP 65,Sound pressure level at 15W/1W - 115/103 dB (SPL), Effective frequency range 500 Hz to 5 kHz, Rated power 15W to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of workMakeHenrich/Honeywell/JBL. rate are excluding of GST

SITC of 17 U Rack with 2 side FAN with 3 socket PDU with 15 AMP DP for power surge safty. With pole mount accessories. Rack should be certified. Make: Valrack,Netrack,Comrack

SITC of 1 KVA on line UPS with 30 min wakeuptime complete in all respect.MAKE APC/ Microtek/DELTA/Emerson

SITC of Micro processor based 2 wire fault tolerant, networkable type Fire Alarm / Detection Control Panel (Expandable to 3 loops to suit minimum 20% extra over the nos. of fire detectors). The panel shall be able to give location of all fire / fault conditions of addressable units via the address codes. Further, the panel must have 4 access levels and Panel should be able to automatically switch ON/OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, loop cards, minimum 7` or bigger Touch Screen to Program and indicate Fire / Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects. The Panel Shall be sheet Steel power coated, sealed to IP30. The Panel shall have 2000 Zones with individual LED Indicators, expandable to Virtual 40 LED Indicators. The Panel shall have 2 Serial Ports. The panel shall have a built in power supply, battery charger maintenance free battery capable of running for a minimum 24 hours operation complete as required and 10000 Event Log History . And conforming to BS5839 standards and Duly Approved by EN 54/UL/VDS as per specifications complete in all respect up to the entire satisfaction of Engineer-in – charge of work. Make Siemens/Honeywell/G.S.T (GST Exclusive)

SITC of addressable multisensor smoke detector including mounting base with LED… etc. complete as required with 2 inbuilt Isolators as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements: Drift Compensation feature and Automatic addressing. Detector should monitor Electromagnetic interference and report to the panel - current and average values.Detector should have IP40 or better protection rating. EMC safety for detector shall be 50 V/m. Shall be UL/EN/VDS certification. (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector) Make: Morley HM/PTSE/I plus MI/B501AP/IV ,Bosch FAP-425-OT plus MS400B,Siemens OH720 plus DB721 (Rates are excluding GST).

SITC of Analog Addressable type Manual Call Point having Surface or flush mounting option fully compliat to EN 54 having Rotary Decade switches for addressing with back box for mounting as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect up to the entire satisfaction of Engineer – in Charge of work. Make : Morley HM/MCP/Glass, Bosch FMC-210- DM-G-R, Siemens FDM22.(Rates are excluding GST).

SITC of Addressable Loop powered sounder with strobe/flasher complete with mounting base as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect up to the entire satisfaction of Engineer - in Charge of work. Make: Morley WSO-PR-N05,Bosch FNM-420, Siemens FDS224R (Rates are excluding GST).

SITC of lmage device/ Sensor - 1/3` Progressive Scan CMOS or Better Bullet Camera Resolution -2 Megapixel or better Frame rate Up to 30 fps or better Lens Type - 3 to 9 mm auto varifocal lens Motorized IR Light and Distance - Ir Range upto 30 mtrs or better Signal to Noise Raio - )50db Minimum lllumination - 0.005Lx Color: lR LED ON 0.0 Lux or better Day Night - Auto Day/Night with switchable IR cut filter Video Compression - H.265, H.264, M-JPEG Camera should have Multiple Streaming- Min. Triple Edge Based Analytics - Tripwire, motion Detection, Intrusion Detection . Storage - SD Card slot should be expandable up to 256 GB System Compatibility – ON VIF Profile SandG Privacy Masking - Minimum 4 Privacy zones or higher Protocols - lPv4/lPv6, HTTP, HTTPS, TCP/lP, UDP, UPnP, ICMP, RTSP,RTP, SMTP, NTP, DHCP, DNS, Noise Reduction - Digital Noise Reduction on/off. WDR -120dB WDR Alarm Input/Output - 1 Alarm Input, 1 Alarm OutPut Audio Input/Output - 1 audio input/1 audio output Operating Environment – lndoor/ Outdoor Operating Temperature -400C to 600C lngress protection and vandaI resident standards - lP66 or better and IK10 or better Certification- UL, FCC, CE, RoHS Complete in all respect upto entire satisfaction Engineer in charge of works.Makes:-Axis /Pelco/ Honeywell

SITC of ABC Stored Preassure type Fire Extinguisher 6.0 kg. Capacity (5 year warranty) bearing ISI Mark for fire fighting ABC class of fire extinguisher will be manufactured strictly as per BIS IS:683:2006 bearing ISI Mark EN3 615 approved powder (MAKE CEASEFIRE / SAFEX/ SAVEMAX)

SITC of Co2 type Fire Extinguisher 4.5 Kgs capacity made from brand new seamless cylinder, as per ISI 7285 and CCE approval, fitted with a Discharge hose and horn and squeeze Grip type valve with initial charge as per ISI 15683:2006 specification, bearing ISI Mark.(Make - Cease fire/ Savemax/ SAFEX)

Supply,Erection,testing and commissioning of Push Button Telephone Desktop model CLI, flash , redial, speaker and mic complete in all respect.Make :-Beetel /Panasonic /Alcatel

Supply,Installation,Testing and commissioning of Wiring for PA system with the following sizes of FRLS insulated copper conductor single core 1100 volts grade cables in existing surface/recessed M.S. conduit etc. as complete as required. Make:Plaza/ Havells/ Polycab.i) 2 x 1.5 sq.mm.

Supply,Installation,Testing and commissioning of 16 channel Network Video Recording and Management system With 2 SATA Slots for recording for all the above, ON/VIF complaint cameras, complete with all necessary required hardware, storage accessories, civil, electrical works and peripheral items, as required as per specifications. Make: Axis/ Pelco/Honeywell.

Netromics Engineering Solutions Private Limited (BID ID -1352008)