SC-KZJ Section: Proposed ancillary works such as improvements to drainage arrangements, cover over to approach roads and etc. for RUB No. 439A (LC No. 51) at Km. 310/20-22 between GNP-NSKL stations.

A-Supplying fabricating and erecting steel work in built up sections. 19343640.40 Below/P

D-Supply of Steel Reinforcement 3812876.00 Below/P

Item Breakup - A-Supplying fabricating and erecting steel work in built up sections.

155.00 124797.68 and/or bolted and/or riveted steel work in built up sections, trusses and framed work, staging, racks, Height Gauge etc. for Steel Structures other than bridge girders, using RSJ, tees, angles and channels/flats, plates, gussets, round or square bars, cleats, bolts etc., with contractors own steel including cutting, bending, straightening, drilling, riveting, hoisting, fixing, erecting, welding, bolting etc., with Providing stiffeners wherever required as per approved drawing including applying a priming coat of a approved steel primer with all contractor's materials, labour, tools & plants, lead & lift including crossing of tracks if required etc., complete as per specification and as directed by Engineer-in- charge. Note: The payment shall be made on the theoretical weight of main components and gusset plates only. Total 19343640.40

Item Breakup - B-Cement Concrete items

60.00 graded stone aggregate 20 mm nominal size) Providing and laying in position machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality for the following Reinforced cement concrete structural elements up to height of 9.0 m from foundation top level, including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as per specifications and direction of the Engineer in charge. Note: 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticiser at the stage of Mix Design and in that case deduction shall be made as per relevant item.

400.00 batched, machine mixed and machine vibrated Design Mix Cement Concrete, mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants, of specified grade (cast in-situ) using 20mm graded crushed stone aggregate and coarse sand of approved quality in Drop and curtain wall and alike structures below bed level, complete in all respect as per drawings and technical specifications to the satisfaction of Engineer- i n - C h a r g e . Note: Payment for cement, reinforcement and shuttering shall be made extra. Total 2768257.80

Item Breakup - C-Supply of cement

53 approved brands/makes Total 2419194.72

Item Breakup - D-Supply of Steel Reinforcement

38800.00 Fe-500D or more of approved brands/makes. Total 3812876.00

Item Breakup - E-USSR-2021 General Items

cum Centering and shuttering including strutting, propping etc. and removal of form for :

2500.00 abutment, wing wall, retaining wall, RCC box type foundations, Abutment cap, Pier Cap, Inspection Platform & Pedestal over Pier cap, Fender wall, Diaphragm wall etc. up to 5m above ground level Providing and fixing various size HTS holding down bolts conforming to relevant Codes/Specification in concrete column or in other structures with proper nuts, bolts, washers/plates, grouting of holes with cement or epoxy concrete with all material, labour, T&P as a complete job.

Kg Designing and developing Detailed structural and working Drawings for following items for ROB/RUB/Bridge based on Railway's approved GADs, duly collecting necessary data from Railways and R&B authorities, duly designing members and submission of check plot duly getting proof-checked by Railway approved institutes, submitting for Railway's verification and approval, making corrections duly incorporating suggestions in drawings/designs, further submission of original in transparent film paper and soft copy (CD) for Railways approval etc. with contractor's technical expertise and instruments, labour, consumables, repeatedly attending till final approval etc., complete as directed by Engineer in-charge.

1.00 23748.39 retaining wall, abutment and approach slab Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.

60.00 minimum 1.10 cum bucket capacity Total 2425872.79 SECUNDERABAD DIVISION-ENGG/SOUTH CENTRAL RLY

Item Breakup - F-DSR-2023 General items

Item Breakup - G-NS ITEM

NS-HYB-USSOR- 2021-18 -Providing and Litre injecting Acrylic Gel for sealing of active / moving cracks, joints and voids in RCC / masonry structures, including cleaning of cracks, drilling of holes, fixing of injection packers, pressure injection of approved acrylic gel system using suitable pumps, sealing of surface after injection, removal of packers, finishing complete as directed by Engineer-in- Charge, conforming to manufacturer's specifications and Railway standards, Including all labor, materials, tools, tackles, scaffolding, curing and incidentals, complete Engineer-in-Charge

NS-HYB-USSOR- 2021-19 :Providing and Kg injecting 1-Component Polyurethane (PU) Foam (fast foaming type) into cracks, voids and joints in RCC / masonry structures under flowing / gushing water conditions, including surface cleaning, drilling of holes, fixing of injection packers, pressure Injection using suitable electrical / pneumatic pumps, sealing of surface, removal of packers and finishing complete as directed by Engineer-in-Charge and as per manufacturer's specifications, including all labor, materials, tools, tackles, scaffolding and incidentals

NS-HYB-USSOR-2021-20-:Providing injecting 2-component, low foaming, flexible Polyurethane (PU) resin Kresin hardener mixed in 1:1 by volume) into Joints, moving cracks and voids in RCC/masonry structures, including surface cleaning, drilling of holes, fixing of injection packers, pressure injection using suitable 2-component electrical / pneumatic pumps, sealing of surface, removal of packers, Finishing complete as directed by Engineer-in-Charge and as manufacturer's specifications, including all labor, materials, tools, tackles, scaffolding and incidentals

NS-HYB-USSOR- 2021-21:Providing and fixing RM Flexible Polyolefin (FPO of 150mm wide) waterproofing tape over cracks, joints and interfaces, including surface cleaning and preparation, application of approved 2-part epoxy based thixotropic adhesive, pasting and pressing of FPO tape, edge sealing, curing, finishing complete as directed by Engineer-in- Charge and as per manufacturer's specifications, including all Jabour, materials, tools, tackles, scaffolding and incidentals. SECUNDERABAD DIVISION-ENGG/SOUTH CENTRAL RLY

NS-ITEM - 2019 :Designing and developing MT Detailed structural and working Drawings for Steel structures upto all heights such as Sheds, Stagings etc. , based on Railway's approved General Arrangement Drawing (GAD) and relevant IS codes & Specifications, duly designing all members, components, connections including foundation and submission of check prints duly getting proof- checked by Railway approved institutes, submitting for Railway's verification and approval, making corrections duly incorporating suggestions/ corrections in drawings/ designs, further submission of original in transparent film paper and design calculations booklets getting final proof checked by Railway approved institutes and soft copy for Railways Total 4125648.40