Repairing and Maintenance of False Ceiling and Almunium Partion work in Room No.131 at E-in-C Office, Cantt Road, Lucknow.. (Lot-31)

Amount

Provinding and Fixing 15 mm thick densified tegular edged eco frendly ligh weight calcium silicate false ceilling tiles of approved texture of size 595x595 mm in ture horizontal level, suspended on inter loacking metal grid of hot dipped galvanised steel section ( galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitable spaced at joints to get required length and of size 24x38 mm made from 0.33 mm. thick (minimum) sheet, spaced 1200 mm. centre to centre and cross 'T' of size 24x28 mm. made out of 0.33 mm (minimum) sheets 1200 mm long spaced between main 'T' and 600 mm. centre to centre form a grid of 1200x600 mm. and secondary cross 'T' of length 600 mm and size 24x28 mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the 1200x600 mm. resting on periphery walls/ partitions on a Perimeter wall angle pre-coated steel of size (24x24x2300 mm make of 0.40 mm thick (minimum sheet with the help of rawl plugs at 40 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including cutting/making opening for serivces like diffusers, grills light fitting fixtures smoke detectors etc, wherever required. Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm. G.I. adjustable rods with galvanised sheet level clips of size 85x30x0.8 mm. spaced at 1299 mm centre to centre along main 'T' bottom exposed with 24 mm. of all tsections shall be pre-painted with polyster baked paint for all heights as per specifications. drawing and as directed by Eng. in charge

S/f of 36 watt to 46 watt above 3300 leumin indoor racess mounting LED Square fitting for Armstrong Ceiling having powder coated die cast aluminium housing body with extended heat sink and diffuser of special polycarbonate material and driver set complete in all respect.

Supply & fixing of anodised/aluminium portion having 2 mm thick aluminium section excluding coating & an average coating of 20 micron fully glazed made of aluminium door tube size 83.5x44.65 mm as vertical member & 114.00 x 44.45 mm size tube in bottom and horizontal members door chaukhat should be of aluminium tublar vertical with two openable shutters. The rate will include cost of material fixtures, 5 mm glass handles, locks, screw necessary beading & excluding cost of floor spring if required for proper completion of work as per direction of Engineer-in-charge.

M/s Santosh Kumar Shrivastava